Product introduction:
Fabric Reinforced Diaphragms, also called Dipped Diaphragm Fabric, It's a kind of Special Dipped Fabrics, woven by Nylon 66 or Nylon 6 Industrial yarns in Both Warp and Weft direction
Dipped Diaphragm Fabric Star and Innovative products.
It has the excellent properties such as high strength, heat resistance, good fatigue resistance, and same performance in both warp and weft.
Product Applications:
Dipped Diaphragm Fabric is a high-quality reinforcement material for rubber diaphragms which used in automobile brake and various metering pumps.
Rubber sheet is a sheet product with a certain thickness and a large area, which is made of rubber as the main material and vulcanized. It is called rubber sheet for short. The rubber plate has high hardness and general physical and mechanical properties. It can work in air with low pressure and temperature of 20 140 C.
Product details
Features of insulating rubber plate:
1. No impurities, high gloss.
2. Good elasticity, good toughness, free curling, no fracture in half.
3. High-standard and high-demand operation environment of bubble-free composite distribution room.
1. Industrial rubber plate is a commonly used rubber plate, which is suitable for occasions where the working medium is water, air, and the working temperature is - 30 50 . It is used as gasket, various sealing and buffering rubber pads, rubber rings, etc. The common rubber plate is mainly made of rubber, with high hardness and general physical and mechanical properties. It can work in the air with low pressure and temperature of 0 60 degrees.
2. The product features of industrial rubber sheet: working in the environment of temperature 15 60 degrees, with waterproof, seismic, sealing and other working properties.
3. Product use of industrial rubber sheet:
1. Packaging materials, precision machinery, medical equipment, furniture, glass and other transportation materials.
2. Civil engineering, construction, residential slab filling materials, residential door and window sealing materials, concrete anti-shrinkage gasket materials, open channel joint filling materials, various civil engineering joint filling materials.
The extruding pipe for the extruding pump produced by our company is widely used in the pump body accessories for the construction of highway, tunnel, bridge, water conservancy, mine line and other construction projects, and also can be used for Spray a large area of wall bottom layer and various types of cover layer, after the pressure pressure grouting, mortar transport foundation construction pressure grouting, in the industry to make glass fiber reinforced cement products to make large and medium-sized precast concrete components in the petrochemical metallurgy industry used in blast furnace inner wall spray perfect fire material
Characteristics:
The pipe body is soft and elastic, with excellent wear resistance, synthetic fiber is added into the pipe body, which can enhance the overall performance of the pipe body, low heat generated in the process of use, good resilience, durable hose has good resistance to positive and negative pressure, Also can be built with oil, chemical, heat resistance rubber due to the application.
Structure:
Inner tube:soft and elastic, with excellent wear resistance (an be built with oil, chemical, heat resistance rubber due to the application)
Reinforcement: High tensile tire cord
Cover: Wear, weather, resistance rubber cover clothe/smooth finish(can be OEM)
GD type rubber fender is developped over D type fender. They can be fixed with anchors thus provides increased stability. GD type fender has bigger bottom width and steel plate mounting. You can also fix them with bolts. We can see they have improved mounting strength and longer endurance than D type fender.
It also has a higher reaction force and energy absorption than D type fender.
It is typically mounted to dock or vessels like tugs, barges, workboats and pilot boats to reduce the effects of collision between the dock and the vessel during mooring and berthing, therefore preventing vessels and quays from damage.
TUF Marine Fenders are with IACS Approvals: CCS, ABS, BV, LR, KR,DNV-GL, NK, RMRS and RINA.
TUF Marine produces Type D Rubber Fender with premium quality rubber by compression moldings.
D type fenders are semi-circular rubber fenders. They are commonly used on vessels as well as small quays.
D model fenders has excellent performance in absorbing the impact during mooring or berthing thus they protect the ship and the dock from damage. You can use them for different quays, piers, docks, wharfs, ships and etc. With advanced production , TUF D type rubber fender is of the moderate reaction force and higher energy absorption than the cylindrical fenders. The width of its bottom is small, so this marine fender can be installed at docks.
They can be precurved, chamfered and drilled to aid installation at a relatively low cost and can also be cut length required
TUF Marine Type D Rubber Fenders are with IACS Approvals: CCS, ABS, BV, LR, KR,DNV-GL, NK, RMRS and RINA
TUF Marine pneumatic floating Yokohama fender provides intensive and long-term protection for ships, harbor crafts, docks, piers, and wharfs.
TUF Yokohama fenders comply with ISO 17357 and PIANC Guidelines for the design of fender systems. And they are manufactured with the features as follows.
The energy absorption does not decrease at inclined compression up to 15 degrees.
The reaction force increases slowly and does not increase sharply even under excess load conditions.
TUF Marine Pneumatic Yokohama Fender is adequately reinforced using strong tire cord against the combined force during ship berthing and mooring operations. The weight of pneumatic fenders are supported by water on which it floats, making simple installation possible on the wharf and anchor mast.
Available in a variety of sizes.
IACS Approvals: CCS, ABS, BV, LR, KR, DNV-GL, NK, RMRS and RINA.
It is easy to install and handle Cylindrical Rubber Fender. It is an economical solution for remote locations and for multi-user berths where vessel types cannot always be predicted.
Cylindrical Rubber Fender has good adaptability of vertical vibration of vessels during berthing and it is very easy to mount and maintenance and suitable for quays, ports, wharfs and etc.
We have Cylindrical Rubber Fenders with sizes ranging from 150mm to 2000mm in diameter.
Installation position: transmission side
Bearing type: rubber metal support
Installation location: rear
Length [mm]: 102
Weight [kg]: 0390
Number of necessary pieces: 1
Inner diameter [mm]: 10,3
Bearing type: rubber metal support
1.The pressure-bearing components are forged, so it has better strength and impact toughness;
2.Floating sealing is applied to the cylinder cover and the open/close of the cover is realized by hydraulic power, so it is quick and convenient for changing rams;
3.The auxiliary oil cylinder affords a smaller volume with same function; double ram Cameron U BOP
4.The ram rubber has massive storage volume, and it adopts self-contained sealing;
5.The standard configuration includes a manual locking device, which ensures the ram is closed tightly in case there is a hydraulic pressure loss;
6.Both the manual and hydraulic locking device and the auxiliary oil cylinder can be installed flexibly into different positions according to customers' requirements, and the installation positions can be changed easily.
Dredging projects can be divided into several types, including capital construction dredging project for port and shipping lane construction, maintenance dredging to the operated port and shipping lane to guarantee enough navigation dimensions, environmental dredging for the silt cleaning of river, lake and sea, dredger filling projects to strength the coast protection or land reclamation. So silt dredge hose is need in these projects, which is mainly used for the suction and discharge of silt.
Silt dredge hoses, also called slurry dredge hose, are usually installed on the two sides of the dredge pump to suck and discharge silt. They are easy to install and remove due to the unique construction of flanges on the each end of hose. Silt dredge hose is very flexible and stable, and it can reduce the vibration caused by storm and water movement. It is highly resistant to abrasion and aging.
Silt dredge hose consists of tube, reinforcement and cover. The tube is made from the mixture of natural rubber and synthetic rubber, mainly EPDM, making the silt dredge hose resistant to abrasion, corrosion and aging. Reinforcement of silt dredge hose is made from multiple synthetic fabrics with spring helix steel w ire, making the hose have very high tensile strength and have the ability of absorbing shock and vibration. The cover is made from SBR, which makes silt dredge hose resistant to cut, abrasion, corrosion, weather, ozone, sunlight and aging.
Many silt dredge hoses are on the ground
Silt dredge hose.
A silt dredge hose with black flanges.
Silt dredge hose with black flanges.
Details of silt dredge hose:
Structure: silt dredge hose is composed of three parts: tube, reinforcement and cover.
Tube is made from the mixture of high quality EPDM and natural rubber, making the silt dredge hose resistant to abrasion and corrosion.
Reinforcement is made from spring helix steel wire with multiple synthetic fabrics, providing full vacuum, kink resistance and vibration dampening.
Cover is made from high quality SBR for abrasion, weather, ozone, aging and cut resistance or high quality neoprene for seawater, ozone and sunlight resistance.
Temperature range: -20 ¡ãC to +40 ¡ãC.
Inner diameter: 6" - 50" (152 mm - 1300 mm).
Outside diameter: 7-1/4" to 53-1/5" (182 mm - 1350 mm).
Working pressure: 0.5 MPa - 1.2 MPa.
Burst pressure: 1 MPa - 2.4 MPa.
The specification of silt dredge hose
Hose code ID OD Working pressure Burst pressure Length
inch mm inch mm MPa bar MPa bar m
SFH-01 6 152 7-1/4 182 1.2 12 2.4 24 20
SFH-02 8 203 9-1/5 233 1.2 12 2.4 24 20
SFH-03 10 254 11-1/5 284 1 10 2 20 10
SFH-04 12 304 13-2/5 340 1 10 2 20 6 - 10
SFH-05 14 350 15-2/5 390 1 10 2 20 6 - 10
SFH-06 18 450 19-1/5 486 0.7 7 1.5 15 6 - 10
SFH-07 22 550 23-3/5 590 0.7 7 1.5 15 6 - 10
SFH-08 24 600 25-3/5 640 0.7 7 1.5 15 6 - 10
SFH-09 28 700 29-3/5 750 0.7 7 1.5 15 6 - 10
SFH-10 32 800 33-1/2 850 0.5 5 1 10 6 - 10
SFH-11 40 1000 41-1/2 1050 0.5 5 1 10 6
SFH-12 48 1200 49-1/5 1250 0.5 5 1 10 6
SFH-13 52 1300 53-1/5 1350 0.5 5 1 10 6
Dredge hose can be used to handle many types of media such as slurry, silt and sand for its excellent abrasion resistance. And it is also used to handle seawater. This is seawater dredge hose. It is mainly used for the suction and discharge of seawater.
Our seawater dredge hose is composed of three parts: tube, reinforcement and cover. The tube is made from the blend of EPDM and natural rubber, which makes the seawater dredge hose highly resistant to abrasion, corrosion, aging and weather. So it can transport the corrosive medium - seawater. The reinforcement is made from spring helix steel wire with multiple synthetic textile, making the seawater dredge hose resistant to kink. And the reinforcement provides full vibration dampening. The cover is made from super high quality neoprene, which makes the seawater dredge hose resistant to corrosive salt water, cut, abrasion, weather, ozone and aging.
Our seawater dredge hose is designed specially to handle seawater, so our engineers choose appropriate materials for the hose. Therefore, it can be competent the job well. Besides, the diameter, length and tube thickness of our seawater dredge hose can be customized according to your requirements.
A seawater dredge hose with red flanges.
Seawater dredge hose.
Many seawater dredge hoses are on the ground.
Seawater dredge hose cross section.
Details of seawater dredge hose:
Structure: seawater dredge hose is composed of three parts: tube, reinforcement and cover.
Tube is made from the mixture of high quality EPDM and natural rubber, making the seawater dredge hose resistant to abrasion and corrosion.
Reinforcement is made from spring helix steel wire with multiple synthetic fabrics, providing full vacuum, kink resistance and vibration dampening.
Cover is made from high quality neoprene for seawater, ozone and sunlight resistance.
Temperature range: -20 ¡ãC to +40 ¡ãC.
Inner diameter: 6" - 50" (152 mm - 1300 mm).
Outside diameter: 7-1/4" to 53-1/5" (182 mm - 1350 mm).
Working pressure: 0.5 MPa - 1.2 MPa.
Burst pressure: 1 MPa - 2.4 MPa.
The specification of seawater dredge hose
Hose code ID OD Working pressure Burst pressure Length
inch mm inch mm MPa bar MPa bar m
SWDH-01 6 152 7-1/4 182 1.2 12 2.4 24 20
SWDH-02 8 203 9-1/5 233 1.2 12 2.4 24 20
SWDH-03 10 254 11-1/5 284 1 10 2 20 10
SWDH-04 12 304 13-2/5 340 1 10 2 20 6 - 10
SWDH-05 14 350 15-2/5 390 1 10 2 20 6 - 10
SWDH-06 18 450 19-1/5 486 0.7 7 1.5 15 6 - 10
SWDH-07 22 550 23-3/5 590 0.7 7 1.5 15 6 - 10
SWDH-08 24 600 25-3/5 640 0.7 7 1.5 15 6 - 10
SWDH-09 28 700 29-3/5 750 0.7 7 1.5 15 6 - 10
SWDH-10 32 800 33-1/2 850 0.5 5 1 10 6 - 10
SWDH-11 40 1000 41-1/2 1050 0.5 5 1 10 6
SWDH-12 48 1200 49-1/5 1250 0.5 5 1 10 6
SWDH-13 52 1300 53-1/5 1350 0.5 5 1 10 6
Details of dredge hose:
Structure: dredge hose is composed of three parts: tube, reinforcement and cover.
Tube is made from the mixture of high quality EPDM and natural rubber, making the dredge hose resistant to abrasion and corrosion.
Reinforcement is made from spring helix steel wire with multiple synthetic fabrics, providing full vacuum, kink resistance and vibration dampening.
Cover is made from high quality SBR for abrasion, weather, ozone, aging and cut resistance or high quality neoprene for seawater, ozone and sunlight resistance.
Temperature range: -20
Inner diameter: 6" - 50" (152 mm - 1300 mm).
Outside diameter: 7-1/4" to 53-1/5" (182 mm - 1350 mm).
Working pressure: 0.5 Mpa - 1.2 Mpa.
Burst pressure: 1 Mpa - 2.4 Mpa.
1>.Ceramic rubber liner description:
Ceramic rubber liner is compounded by rubber sheet, flat or spherical ceramic tiles and
Steel plate through hot vulcanizing process.It is fixed to equipment surface by means of bolts
Connection. There are two types of ceramic surface:flat and spherical.Ceramic rubber liner is
High wearable, high cut-resistant, and super impact-resistant.
2>.Features of ceramic rubber liner:
High wear and cut resistance
High impact resistance
3>.Technical parameters of ceramic rubber liner:
3.1.Aluminum oxide content of ceramic:92±1%;specific gravity of ceramic :3.6±0.1;hardness of ceramic:>mohs hardness 9;color: white.
3.2.Rubber:nr; peeling strength:=25 mpa
3.3.Steel plate:q235a
3.4.Selection principles:
3191 Rubber Related Items Suppliers
Short on time? Let Rubber Related Items sellers contact you.
