Find Verified Networking Software Suppliers, Manufacturers and Wholesalers

Htdvs network video server

Htdvs network video server introduces mpeg-4/h.264 video compression, supports tcp/ip, udp, transmits high quality video and bi-directional audio by rj-45 interface, controls ptz by rs485 interface with multi users visit via network in the security, 4 video inputs and 1 outputs, six alarm interfaces for defining as input or output, motion detection configuration, alarm and remote transmission, remote configuration, operation and ie browse.

Main Features:
1.Display the users/calling/last  caller information
2.  Display GPS information (Long, Lat)
3.  Can receive dispatcher message
4.  Emergency  button  (SOS)
5.  Small body big capacity (5100mAh)
6. Optional quick charging charger90% charged within 2hours
7.  Optional 6-way  bank charger
8.  Support 5V-12V Input

Htedvs/r-h4d stand-alone dvr

Htedvs/r-h4d embedded stand-alone dvr has the features of strong network function of htdvs network video server for remote configuration and transmission but mini exterior for flexible installation and of the advantages of htedvs/r embedded stand-alone dvr with rtos realtime operation system and local recording, with mpeg4/h.264 video compression, g.729a audio compression; single-channel audio and 4 channels video input, viewing 4channels non real time video at the same single-channel video and audio output; built-in 2.5 inches hard disk for recording; usb2.0 interface and nas storage mode; 6 alarm interfaces can be set to be inputs or outputs optionally, transparency i/o interfaces as well (aux i/o).

Dcu2000 64 doors anti-tail interlock access

Dcu2000 64 doors anti-tail interlock access control system is made up of software of management center, controllers, door modules, readers or fingerprint scanners, magnetic contacts, open door buttons, locks and alarms. One management center will connect several 485 buses with each having 16 controllers connected but unlimited by tcp/ip, each controller will connect and control 64 doors. There are bidirection doors control, anti-tail interlock, 8 anti-latency zones setup, rf card and password open, access group, keypad and card armed/disarmed, schedule and holiday control, normal open, alarm for overtime open, abnormal open, five times error swiping, tamper, latency, duress

Dvr2000 rvsc integrated surveillance center

As a multi-system surveillance platform, the dvr2000 rvsc integrated surveillance center can perform audio and video surveillance, vector map management, receiving and disposing alarm information and the management and control of the access systems, alarm devices and environment detection devices.
Multi display for video and vector map, multi-division surveillance for any cameras from many servers, 32 channels video and audio record at the same time, local/remote playback, ptz and light remote control supported.
Auto receiving alarm information and show the relating video, remotely controlling the alarm devices for arm, disarm, bypass, remove bypass or remove alarm.
Receiving the action and alarm information from the access system, authorizing and opening or closing doors remotely.
Detecting, recording and displaying the voltage, current, temperature, humidity and some environment parameters
Dvr2000 rvsc integrated surveillance center

Dvr2000 series audio

1.Mpeg-4/h.264 video hardware compression;
2.Cif real-time recording, d1 recording not in real time;
3.Code flow reaching from 60m to 200m/h;
4.Installing alarm input/output module;
5.Using the watchdog to avoid the computers halt;
6.Supporting cbr and vbr, 500:1 compression ratio;
7.90 rotation supported

Hengtong nts2000 gps time system

Hengtong nts2000 gps time system, composed of nts 2000 network time server, server timing and setting terminate and stay resident program and client timing terminate and stay resident program, receives the time message from gps and send to every client in network every second for automatically synchronizing the time.
Nts2000 gps time system is widely applied to any network system where many computers need a same time source, such as securities, public security, education, telecommunication, finance, organ, etc.

HTEDVS/R-SPC Stand-alone DVR

Hengtong htedvs/r-spc embedded stand-alone digital video recorder is a mainboard with 4 channels video input, which can be assembled in the standard home pc or industrial chassis. By inserting the video card into the standard pci slots the real time video and audio input channels will be expanded up to 8/12/16/20/24, and non real time video input channels up to 32-64. Sound card. Network card, vga card, rs232, usb integrated on the mainboard with 64m memory.
Video output, vga, mic, audio output and infrared remote control interfaces offered, alarm i/o, mouse operation and nas (smb/cifs) supported.

Specification:
Alarm means of communication: Alarm information transmitted through the telephone network (PSTN)
Programming: Local keyboard programming
Arm/disarm and timed arm/disarm: remote control, system keyboard, telephone call, or SMS
Hardwired zone reaction time£º50ms-750ms
Wireless reception frequency: 315MHZ
Voice recording£º20s£¨24 Segment£©
Power Supply: AC 220V
Backup Power: DC 12V 7Ah (Maintenance-free lead-acid battery)
Maximum output power: DC 12V 1200mA
GSM frequency:900MHz/1800MHz
Installation: A wall-mounted or embedded
Weight (with battery): About 3Kg (6Kg)
Host Size: 26.4 cm ¡Á 26.1cm ¡Á 8cm ( Excluding the antenna height).

Function:

Microcomputer controller with 8 wireless zones and 8 hardwired zones, keyboard programming, and liquid crystal display
Alarm reporting through public telephone network to specific telephones, or to central monitoring stations in agreement with ADEMCO 4+2 or ADEMCO Contact ID
Voice alarm to mobile phone or regular telephone
Arm/disarm via SMS remote control, checking the control console status via SMS (Double encryption)
Alarm report via SMS message, zone SMS information can be updated
SMS interconnecting with the alarm centers, to control the mainframe
Can store up to five alarm phone numbers
Support eight user codes and a Installer Code
Arm/disarm and timed arm/disarm via remote control, local keyboard, or telephone line
Wired / wireless zone can be independently bypassed
Built-in relay output linked to long-distance telephone for remote control of other electrical appliances
Monitor the voice of the scene
Wireless detector code learned automatically with remote controller
Alarm report for telephone line failure or theft.


Neutral packing.

Wireless calling system to enhance service level in your restaurant, it helps the seated guest to call the waiter any time they need service.

1.Combination: wireless receiver + waterproof call buttons + repeater + pagers (optional) + pager moudle(optional)
2. Installation: install the buttons on each table, Install wireless receiver at the counter to attract waiter's attention
3. Function: when guests need any help,they can press the call button to call the waiter. The waiters could get the call from the display call number and sound, or from the wrist pagers.

Features:

1. With high strength aluminum alloy shell,durable in use
2. Use digital code technology and the function is steady and reliable
3. With 4 high brighty LED screen,the visual distance will be 50 meter indoor
4. It can work with 99 routes transmitter MAX,all 1-key and 3-key button can work with Y-99P
5. It can show last 10 calls in rolling untill the call is cancelled.
6. It can indicate the service type
7. The volume is adjustable.

Technical parameters:
Working voltage: DC12V~18V
Working current: <20mA
Working Frequency: 433Mhz
Dimension: 248x163x23mm.


In cardboard box.