Find Verified Electronics Communications Suppliers, Manufacturers and Wholesalers

HT-8008KL long range alarm system
1. Wireless infrared detector can up to 10km transmitting distance with control panel.
2. 100 independent zones,LED screen display.
3. Level 4 volume alarm optional, drive alarm sound 00-99 minutes can be adjusted and inquire 60 lastest alarm information records, alarm rolling display.
4. The main panel with 2 groups timing arm/disarm time,with current arm/disarm state instructions.
5. With computer network module,by RS232 interface with computer connected,real-time display and management alarm information and electronic map.
6. With the function of remote control operation
7. Can prerecord 10 seconds alarm voice,auto-play voice when telephone is answered.
8. Can prerecord 6 groups telephone number, Alarm cycle call 2 times.

Power supply: AC220V 10% 50Hz
Standby Current: 75mA
Backup battery: 8backup battery,600mA
Alarm Current: 400mA
Wireless accessories: 98 pieces(included remote control)
Bell power supply: DC 12V 150mA
Wireless frequency: 230MHz
Temerature: -20 to 50
Built-in Siren: 100dB
Humidity: 40% to 80%
Demension: 337mm 220mm 62mm L H W
Installation: Mounted wall
Weight: 1.65kg
Material: ABS engineering plastics.


One set by one clore box, 20boxes by one carton.

Pixel pitch: 16mm
Pixel configuration: SMD 3-in-1 (1R1G1B)
LED encapsulation: 5050
LED tile size: 512mm
Cabinet dimensions: 512 x 512mm
Physical resolution: 3,906/m²
Cabinet resolution: 32 x 32 pixels
Cabinet weight: 7kg
Best viewing distance: 16 to 85m
Viewing angle:
o Horizontal: ¡Ý120¡ã (optional)
o Vertical: ¡Ý120¡ã
Average power consumption: <600W/m²
Maximum power consumption: <1,200W/m²
Control mode: synchronism
Graphic card: DVI card
LED driving mode: static constant
Frame rate: ¡Ý60Hz
Refresh rate: ¡Ý1000Hz
Brightness: ¡Ý6,500cd/m²
Operating temperature: -30 to 60¡ãC
Ingress protection (front/rear): IP65/IP54
Input voltage: 110V AC ¡À 10% or 220V AC ¡À 10%
Brightness adjustment: 16 levels automatically and 100 level manually
Computer system: Microsoft's 98/XP/2000/7 and more
Signal input: RFS-Video, RGB, RGBHV, YUV, YC, Composition, HDSDI/SDI and more (optional)
Control system: PCTV card (optional) + DVI graphic card + main control card + optical fiber transfer (optional)
MTBF: ¡Ý6,000 hours
LED lifespan: 100,000 hours
Malfunction dot rate: <0.0001
Software: LED studio.


According to requirements.

Pixel pitch: 7.62mm
Pixel density: 17,222 pixels/m²
Refresh rate: 300Hz
Brightness: 1,000cd/m²
Pixel composition: 1R1G1B
LED encapsulation: SMD 3528
Drive mode: 1/8 scan
Module dimensions: 243.84 x 243.84mm
Cabinet dimensions: 731.52 x 731.52mm
Weight: ¡Ü55kg/m²
Viewing angle: ¡Ï110
Gray grade: 16bit
White balance temperature: 5,500K (adjustable)
Contrast: 1000:1
Working voltage: 5V DC
Power supply: 100 to 240V AC, 50Hz
Protection:
o Front: IP65
o Rear: IP54
Interface mode: aviation connector
Installation: hoisting or fixed
Power consumption:
o Average: 325W/m²
o Maximum: 300W/m²
Display interface: VGA, DVI, HDMI and 1000Mbps Ethernet port
Storage temperatures: -30 to 80C
Storage humidity: 10 to 99%
Working temperatures: -20 to 60C
Storage humidity: 10 to 99%
Lifespan: 100,000 hours
Pressure testing: 3,000V/minute
Ground resistance: ¡Ü0.1¦¸
Drain current: ¡Ü3.5mA
Gap between modules: ¡Ü1mm
EMI: meet EMC standard.


a

Specification:
Alarm means of communication: Alarm information transmitted through the telephone network (PSTN)
Programming: Local keyboard programming
Arm/disarm and timed arm/disarm: remote control, system keyboard, telephone call, or SMS
Hardwired zone reaction time£º50ms-750ms
Wireless reception frequency: 315MHZ
Voice recording£º20s£¨24 Segment£©
Power Supply: AC 220V
Backup Power: DC 12V 7Ah (Maintenance-free lead-acid battery)
Maximum output power: DC 12V 1200mA
GSM frequency:900MHz/1800MHz
Installation: A wall-mounted or embedded
Weight (with battery): About 3Kg (6Kg)
Host Size: 26.4 cm ¡Á 26.1cm ¡Á 8cm ( Excluding the antenna height).

Function:

Microcomputer controller with 8 wireless zones and 8 hardwired zones, keyboard programming, and liquid crystal display
Alarm reporting through public telephone network to specific telephones, or to central monitoring stations in agreement with ADEMCO 4+2 or ADEMCO Contact ID
Voice alarm to mobile phone or regular telephone
Arm/disarm via SMS remote control, checking the control console status via SMS (Double encryption)
Alarm report via SMS message, zone SMS information can be updated
SMS interconnecting with the alarm centers, to control the mainframe
Can store up to five alarm phone numbers
Support eight user codes and a Installer Code
Arm/disarm and timed arm/disarm via remote control, local keyboard, or telephone line
Wired / wireless zone can be independently bypassed
Built-in relay output linked to long-distance telephone for remote control of other electrical appliances
Monitor the voice of the scene
Wireless detector code learned automatically with remote controller
Alarm report for telephone line failure or theft.


Neutral packing.

Mn/300/100 fire alarm control panel
Overview
The mn300 is a new type of analog fire alarm control panel which has 100 alarm control points (detectors and modules which are characterized by fully mixed coding, non-polarity and two buses). It complies with the provisions of both fire alarm control units (gb4717-2005) and automatic control system for fire protection (gb16806-2006).

Features
1 the intelligent detectors and the intelligent modules have internal microprocessors to realize digital filtering and auto-compensation functions; the data collection is true and reliable; the mn300 control panel can carry out data processing based on fuzzy control theory and modern fire alarm theory to fundamentally avoid missing alarms and to reduce false alarms, so as to improve reliability.
2 the detectors have a sensitivity setup function and can adjust the alarm sensitivity according to the specific environment and their influences.
3 the detecting bus and the control bus share a two-wire structure and have non-polarity and fully mixed coding of the detectors and modules, and the intelligent detectors and the intelligent modules can be directly connected to them, which greatly simplifies the system wiring, engineering installation and circuit maintenance.
4 the system uses an ac-dc master-standby power supply system which will automatically change between the master and standby power supplies in the event of a power failure of either of the two power supplies to ensure uninterrupted operation of the system.
5 the mn300 can be connected to a special mini-printer to realize real-time printing.
6 the mn300 can be connected to floor fire display panels to display fire alarms by standard rs-485
7 the mn300 can be connected to ten multi-line linkage control/monitoring points to control and monitor important equipment.
8 the mn300 is equipped with eight bus manual control points, which makes it very easy for the user to control related equipment.

Intrusion detector perimeter security break beams security kits
Alarm system including 1 pair 3-beams solar powered beams detector and 1 set wireless receiver
All items are brand new in original manufactures packaging
The detector is a sophisticated break beam system incorportaing solar powering, infrared technology and requires no wiring.
If you want to protect the perimeter of a large area of land, this intrusion detection device should be your first choice.
This break beam system is powered by lithium ion batteries that recharge through built-in solar panels, which means it works 24/7 nonstop for ultimate security protection. Installation couldn't be more simple: mount the two transmitters evenly, up to 300 feet apart from each other (the distance of a football field), then place the hb-mfr receiver within 1500 feet of the system and your laser beam fence is now in operation.

When the beam is broken, the receiver will play one of four different tunes, determined by which zone is disturbed. The point to point sensor was built to avoid false alarms, such as wind, leaves falling, or small objects passing through the system so only intruders will cause an alert. You can place the transmitters at any height as well, to avoid it being triggered by small animals in more rural areas. If you keep the transmitters hidden, intruders will never even know that they set off an alarm, unless you want them to. Put control and safety of your life and land back in your hands.
This product also contains four form "c" relay outputs and one 12vdc output. The receiver is powered by a 12vdc transformer. The output durations are adjustable up to 10 minutes. It also offers a 5 minute exit delay so you can leave your home or property without disturbing any nearby occupants as well as a reminder beep and counter function.
Wireless frequency - 434 mhz
Power type (included) - solar/lithium ion rechargeable
Detection type - infrared break beam
Operating temp. - -30deg.F to 120deg.F

Communication tower

Tubular steel tower

Gantry

Telecom tower

Power transmission tower.