Ultrasonic Thickness Meter RUM7401
1.Spec:
Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks,etc.in industries of petroleum, shipbuilding, power station, and machine manufacturing.
2.Features:
* Using the latest high performance and low power consumption microprocessor technology.
* Bidirectional measurement, for materials within measurement range, thickness is measurable with know velocity, Conversely velocity is measurable with know thickness.
* Automatic memory material code and sound velocity value, convenient to use.
* Coupling symbol indication.
* Use USB/RS-232 data output to connect with PC.
* Provide Bluetooth data output choice.
3.Specifications:
Display: Large Screen LCD
Housing Material: Aluminum Alloy
Measuring Range: 0.75~400mm(45#steel,Depend on Probe)
Resolution: 0.01mm/0.1mm/0.001 inch
Accuracy: ±(0.5%n+0.05)
Sound Velocity: 1000~9,990m/s
Lower Limit of Pipes: �¦15x2.0mm �¦20x3.0mm(Determined By Transducer)
Operating Conditions: Temperature: 0~40�º; Humidity:
Digital Dew Point Meter RTM2610
1.Introduction:
It is a high-accuracy professional dew point meter. It is able to measure Ambient Temperature, Dew Point Temperature, Wet Bulb Temperature, Relative Humidity, Absolute Humidity and PPM. It can quickly respond to temperature and humidity measurements in the industrial range. It is also capable of measuring temperature and humidity in a variety of complex environments. Widely used in laboratories, precision manufacturing, modern agriculture, meteorological measurement, chemical and pharmaceutical fields.
2.Features:
Large LCD with display. It can display three values at the same time.
Ambient Temperature measurement.
Dew Point Temperature measurement.
Wet Bulb Temperature measurement.
Relative Humidity measurement.
Absolute Humidity measurement.
PPM measurement.
Temperature unit (C/F).
0.01 resolution, High accuracy.
Maximum and minimum values display.
With the displayed values hold function.
Automatically power off.
3.Specifications:
Display: Backlit LCD
Test Parameters: Ambient Temperature, Dew Point Temperature, Wet Bulb Temperature, Relative Humidity, Absolute Humidity, PPM
Range: Ambient Temperature: -30~120�°C (-22~248�°F)
Relative Humidity: 0~100%RH
Dew Point Temperature: -45~120�°C (-49~248�°F)
Wet Bulb Temperature: -20~40�°C (-4~104�°F)
Absolute Humidity: 0~400g/m�³
PPM: 0~50000
Resolution: Ambient Temperature: 0.01, 0.1
Relative Humidity: 0.01
Dew Point Temperature: 0.01, 0.1
Wet Bulb Temperature: 0.01, 0.1
Absolute Humidity: 0.01, 0.1
PPM: 1
Temperature Unit: C/ F
Operating Conditions: Temperature: 32~122 F (0~50 C); Humidity:
500MHz Timing-Mode (Internal Clock)
200MHz State-Mode (External Clock)
Advanced Multi-Level Triggering
Real-Time Sample Compression
+6V to -6V Adjustable Logic Threshold
I2C, SPI and RS232 Interpreters
Built-in 300MHz Frequency Counter
Specifications:
Sampled Channels 34
Timing Mode Sample Rate 1KHz to 500MHz
Sample Buffer 34x2048 samples
Maximum Time in compression mode: 10 hours(100MHz sample rates)
Trigger sequencer: 120MHz max, 6ns minimum pulse width
Trigger event counters: 20 bits, range 1 to 1,048,576 for each trigger level
Input impedance: 180K Ohms, paralleled by <5pF
Frequency counter range : 120MHz with 10Hz resolution, 4 channels
Threshold range : adjustable +6 to -6 volts with 50mv resolution
Threshold accuracy: +/-(100mV + 5% of setting)
Channel to channel skew: 0.6ns typical, 1.0ns max
State mode Setup/Hold times: 2.0/0ns, window adjustable +/-2.5ns
Input sensitivity: 0.25Vpp @50MHz, 0.5Vpp @120MHz
Input dynamic range: 10 volts peak-peak
Maximum input: +/-40 volts DC, 15 volts peak-peak pulse amplitude
Timebase accuracy: +/-0.005% over full temperature range
Input Probe: Teflon insulated leads terminated with female contacts
compatible with 0.025"-0.030" round or square pins.
Power supply current: 200 milliamps max (supplied by USB)
Temperature range: operating +5 to +50C, storage -10 to +65C
Port: USB1.1 or 2.0
Operating systems: Win98/ME/2000/XP/Vista
Small size(mm):190(L)x100(W)x40(H) , light weight: 380g , easy to carry.
Features:
1.Signal Frequency Range: 0-5MHz ; Frequency Counter range: 0~2.7GHz
2.Outputs: One channel of Arbitrary Waveform ; 8 Bits signal; Synchronized signal
3.Inputs: Two channels of Frequency counter; 8 Bits signal; External Trigger
4.Arbitrary Waveform edited by mouse
5.General waveforms: Sine, Square, Triangle, Saw-tooth, TTL, White Noise, Gauss noise, Exponent, AM, FM
6.Settable Parameters: Amplitude, Frequency, Offset
7.The data fileí»s format is completely compatible with Tektronixí»s products and software. It can read directly the data files from and be edited by Tektronixí»s software.
8.DDS technology, High accuracy and resolution, wide software supporting,
Small size(mm):190(L)x100(W)x40(H) , light weight: 380g , easy to carry.
The 2-channel digital storage oscilloscope at an outstanding price! When connected to PC with USB2.0 interface, you get a fully-featured storage oscilloscope with the extra advantage of being able to easily store data for later processing.
Small size(mm):190(L)x100(W)x40(H) , light weight: 380g , easy to carry.
The 2-channel digital storage oscilloscope at an outstanding price! When connected to PC with USB2.0 interface, you get a fully-featured storage oscilloscope with the extra advantage of being able to easily store data for later processing.
Small size(mm):190(L)x100(W)x40(H) , light weight: 380g , easy to carry.
Voltage : as your demand
Flow Rate: Variable from 0.5 to 5 lpm
oxygen Concentration: 93% 3% 0.5 to 5 lpm
Power Consumption : 300 W
Weight:17KG
Dimensions 356 (W)* 305 (D)* 610(H)mm
Voltage : as your demand
Flow Rate: Variable from 0.5 to 5 lpm
oxygen Concentration: 93%í+3% 0.5 to 5 lpm
Power Consumption : 300 W
Weight:17KG
Dimensions 356 (W)* 305 (D)* 610(H)mm
ANEVP(F) series battery pack charge/discharge test system is a set of automated test system designed and developed in accordance with the battery pack industry standard for electric vehicles for the detection of PACK line, mainly consisting of power battery pack charge/discharge test power supply and host test software. The power battery pack charging/discharging test power supply adopts high-frequency PWM rectification and bidirectional DCDC conversion, FPGA digital control, seamless switching between forward and reverse, automatic bidirectional operation, energy feedback to the grid at full power; advanced digital control, ultra-high control accuracy, fast response, wide output voltage range; compared with conventional bidirectional power supply, it can achieve full range of high-precision output from 0V to full scale, up to 2000V, and the maximum power of a single machine can reach 1MW.
Features:
Grid feedback: both power supply and load characteristics, achieving the function of load for automatic energy feedback to the grid in addition to high-power DC power supply performance; energy saving, green and environment protection.
High-precision output: accuracy of output voltage and current: �±0.1% F.S., output voltage ripple: â?¤ 0.2% FS, high-quality voltage and current waves, no damage to the battery pack.
Fast dynamic response: Current rise time (10%-90%): â?¤1ms, meet the test standard requirements of battery pack industry;
output voltage response time for 10%-90% sudden applied load and 90%-10% sudden shedding load: â?¤5ms;
+90%~-90% forward/reverse switching time: â?¤10ms.
Mainstream high-frequency PWM rectification control, power factor â?¥0.99, THD and injected harmonic current meet the requirements of GB/T14549-93, high-quality energy feedback to the grid.
Optimized bidirectional DCDC conversion, wide output voltage range, 0V-full range adjustable.
CC, CV, CP modes.
Multi protection: input over-voltage/under-voltage, lack phase, output over voltage, IGBT overheat, IGBT over current, over temperature protection, short circuit current-limiting protection.
Built-in EMI filter to filter the interference signal caused by the high-frequency switching process.
Large-screen LCD display, compatible with buttons and touch screen, suitable for operation under various harsh operating conditions.
Communication and remote control: standard CAN, RS232/RS485 port and remote control software of the upper computer.
The setting can be imported into an EXCEL file: current, voltage, power, temperature, SOC during conventional shortcut group parameter test process; cycle list, current, voltage, power, temperature, SOC test data in programming mode.
BMS data docking: DBC file import, including all types of DBC files on the market, manually adding of protocols, quick data docking and control with BMS of different manufacturers.
Cup Grain Moisture Meter LDS-1G
The Cup Grain Moisture Meter LDS-1G is used for fast and accurate measurement of moisture content in grains,including wheat,rice,soy bean,rapeseed and other grains and seeds.
Features:
* Able to measure grains up to 20 species.
* The cup type measurement causes small error.
* Wide measuring range.
* Temperature and volume of grains can Display
Specifications:
Measuring object:
nonmetallic granulated materials such as cereal, wheat, rapeseed, soybean, vegetable seeds, corn, feed and so on
Measuring error: 0.5 %( main moisture range)
Repeat error: 0.2%
Measuring range: 3-35%
Working environment: 0-40 C
Temperature compensation: automatic
Attached function:
volume-weight conversion display, sample weight display, temperature display, average moisture content calculation
Calibration:
4 points calibration, unlimited sample (20 common varieties have been calibrated in advance, can be tested directly)
Power supply:
AC/DC, 4x1.5 AA size battery/special external power adapter
Weight: 3.8KG
Dimensions:
36*43*24CM
grain moisture meter
Name
No
Name
No
Terrier Valley
P1
Peanuts
P11
Soybean
P2
Chinese sorghum
P12
Wheat
P3
Black sesame seeds
P13
Rapeseed
P4
Sunflower seeds
P14
Corn
P5
Watermelon seeds
P15
Barley
P6
Cottonseed
P16
Indica Valley
P7
Soybean meal
P17
Rice
P8
Cottonseed meal
P18
Large grain corn
P9
Rapeseed
P19
White wheat
P10
Feed pellets
P20
DM200C Concrete Moisture Meter
DM200 Concrete moisture meter is a high-performance and digital moisture testing equipment by our company based on international advanced technology.The instrument adopts high frequency principle, digital display, sensors and main body together as one, equipped with ten gears are used to measure concrete,glass,cement and brick.
Features:
* Its integrative design convenient to carry outside for testing.
* Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
* It is small in size, light in weight ,easy to carry out for fieldwork if needed.
* Manual off at any time.
Specification
Display:4 digital LCD
Measuring range :
0.00-2.00% (d)
0.0-50.0% (s)
Measuring condition
Temperature:0-60 C
Humidity:5%-90%RH
Resolusion:0.1 or 0.01
Accuracy: ± 0.5(main moisture range)
Power supply:
9V battery (6F22)
Dimensions:
160mm 60mm 25mm
Weight:203g (not including batteries)
DM200T Textile Moisture Meter
DM200T Textile moisture meter is a high-performance and digital moisture testing equipment by our company based on introduction of foreign advanced technology. The instrument adopts high frequency principle, digital display, sensors and main body together as one, equipped with ten gears are used to measure different kinds of Cotton Clothes, Yarn, wool and other textile materials.
Features:
* Its integrative design convenient to carry outside for testing.
* Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
* It is small in size, light in weight ,easy to carry out for fieldwork if needed.
* Manual off at any time.
Specifications:
Display:4 digital LCD
Measuring range :
0.00%-2%
0.0%-90%
Measuring condition
Temperature:0-60 C
Humidity:5%-90%RH
Resolusion:0.1 or 0.01
Accuracy: ± 0.5(main moisture range)
Power supply:
9V battery (6F22)
Dimensions:
160mm 60mm 25mm
Weight:203g (not including batteries)
Dew Point Meter HD600
Widely used in workshops, offices, factories, libraries, computer stations, laboratories and warehouses. Applicable to pharmaceutical, packaging, textile, cigarette, electronic manufacturing and other industries.
Features
Adopt digital signal sensing technology, good measurement repeatability, fast response and high sensitivity .
Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
Able to measure Humidity, Temperature, Wet Bulb Temperature,
Optional USB or Blue Teeth
Data hold function.
Low battery alert.
SPECIFICATION
Display:10mm Dispaly
Parameters Measured:
Humidity and Temp, Wet Bulb Temp, Dew Point Temperature
Multifunctional Right Angle Ruler 90 /45 High Precision Positioning Marking Thickened Angle Ruler Woodworking Special Tools
Grade
DIY, Industrial
Warranty
Standard
Customized support
OEM, ODM
Place of Origin
China
SD
Brand Name
SN
Model Number
QB-2024WT-159
Item Name
Woodworking Tools
Material
Aluminum alloy And Steel Alloy
Compatibility
Carpenter Must Have Tools
Feature
Essential Woodworking Tools
Versatility
Suitable DIY woodworking
Application
Woodworking tools hand
Usage
Home ImprovementS
Certification
Woodworking Tools Best Seller
Logo
Accept Customized Logo
OEM
OEM Avalialbe
5 90 Degree Carpenter's Layout Ruler45 90 Degree Carpenter's Layout Ruler
Woodworking T - shaped marking square is used for various marking holes,like wood processing, aluminum processing, marble
processing, stainless steel processing and so on.3-10 mm drill bit fixed hole, 0-60 degree marking, durable, up to 3 cm thicknessWoodworking T - shaped marking square is used for various marking holes,like wood processing, aluminum processing, marble
processing, stainless steel processing and so on.3-10 mm drill bit fixed hole, 0-60 degree marking, durable, up to 3 cm thickness
