Find Verified Plastic Products Suppliers, Manufacturers and Wholesalers

Ptfe extruded rod:

Description:
1.Ptfe rod could work in temperature of -180~260
2. Good dielectric in mediums.
3. It has not-sticky property.
4. Nice insulation property
2. Self-lubrication

Specification of ptfe rod: (oem is available)
Diameter(mm)Length(mm)Tolerance
51000-3000mm


Properties:
ItemData
Apparent density2.10-2.30 g/ cm3
Tensile strengthy14 mpa
Elongation at breaky140%
Working temp-180~260
Melting point330
Produce max.Temp390
Compressive strength 1% deformation400-500%
Hardness50-60 shored
Water absorption0.01%

Application:
1 chemistry industry: used in sealing, pipeline, pipe fitting and high pure agentia household utensils etc.
2. Machine: used in piston ring, guide ring, machine tool guideways etc.
3. Electrical and electronic engineering: used in electric wire, electric cable, electrical condenser film, insulation board etc.
4. Construction: use as bridge, tunnel, large-scale chemical industry pipeline, storage tank supporting bearing slipper.
5. Light textile and other industry: ptfe product have nonstick properties, used in spinning, papermaking, foodstuff, rubber, ceramics etc.





Wooden case

Easy to put on and take off; Prevent dust and debris from entering the port when it is not in use; Prevent the contact point of the ports from being oxidized.

Advantages
* High grade plastic-material

* Neutral in taste

* Non-toxic

* No harm to cutting-instruments

* No absorption of liquid

* Easy to clean

* Suitable for dish-washers

* Unbreakable

* Environment friendly

Product Description Guanyu industry leading 100/200mm tall plastic shelf storage bins with 18sizes are constructed of durable industrial-grade plastic and provide a neat and attractive storage solution.Plastic Shelf Storage Bins are a superior alternative to weak and flimsy cardboard bins. 300/400/450/500/600 deep bins work with standard wire or steel shelving.The superior construction of these affordable plastic shelf storage bins allows them to be fully loaded without bulging or cracking and multiple divider slots allow for a greater number of storage options.One-piece construction is waterproof and unaffected by grease or oil. Works in temperatures down to -20 .
Width and length dividers multiply storage methods."Technical Datasheet Color: Red | Yellow | Blue | Green | White | ClearOutside(L W H): 498 197.5 153.1mmInside(top)(W L): 175 455mmInside(bottom)(W L): 152 420mmMax. Height(H): 153.1mmUsable Height: 142.8mmHanglock Height: 8mmFront Size: 53 170mmWeight: 475gLoad Capacity: 30kgHang Load Capacity: 20kgMaterial: PPTemperature: -25 40 Accessories: Length Divider SFV515Accessories: Width Divider SFH215Accessories: Front Plant SFF200Drop Test(ISO2248-1985): Pass 3 meters free fallen testImpact Test(Gardner Test): 144 in/IbsSpecifications Packing Detail Carton size:510 405 405mmQty/ctn:10pcs/ctnG.W.:5.7kgColor label on the carton to show the part color Other Details Length Dvider:SFV515B1:1/2 divider slotMin. distance between slot:80mmWidth Dvider:SFH215A5:1/2 divider slotMin. distance between slot:57.5mmFront Plate:SFF200

Product Description Long-lasting warehouse storage bins for small parts and components.Nest to save storage space.FDA compliant resins.Molded label holder to identify contents.Length and Width Dividers are available. 100/200mm tall, 300/400/450/500/600mm deep are designed for shelf unit, rack or standard shelving.Technical Datasheet Color:Red | Yellow | Blue | Green | White | ClearOutside(L W H):300 197 153mmInside(top)(W L):175.5 255mmInside(bottom)(W L):153 220mmMax. Height(H):153mmUsable Height:142.8mmHanglock Height:8mmFront Size:53 170mmWeight:287gLoad Capacity:30kgHang Load Capacity:20kgMaterial:PPTemperature:-25 40 Accessories: Length Divider  SFV315Accessories: Width Divider  SFH215Accessories: Front Plate  SFF200Drop Test(ISO2248-1985): Pass 3 meters free fallen testImpact Test(Gardner Test):96 in/IbsSpecifications Packing Detail Carton size:405 310 405mmQty/ctn:10pcs/ctnG.W.:3.6kgColor label on the carton to show the part colorOther Details Length Dvider:SFV315B1:1/2 divider slotMin. distance between slot:80mm Width Dvider:SFH215A5:1/2 divider slotA4 A6:1/3 divider slotA2 A4 A5 A6 A8:1/6 divider slotMin. distance between slot:40mmFront Plate:SFF200

Product Description ¨150mm High Small Parts Storage Bins are available in multiple sizes and colorsSmall Parts Storage Bins are tough, heavy duty bins that will not get worn out like cardboard or corrugated boxesOptional dividers, as well as slots on the front for labelsSmall Parts Storage Bins are made from heavy duty, high density, FDA approved PolypropyleneSmall Parts Storage Bins are waterproof, rustproof and easily washable with soap and waterTechnical Datasheet ¨Color: Red | Yellow | Blue | Green | White | ClearOutside(LWH): 301397151.5mmInside(top)(WL): 376.5255mmInside(bottom)(WL): 351.5220mmMax. Height(H): 151.5mmUsable Height: 142.9mmHanglock Height: 8mmFront Size: 53369mmWeight: 503gLoad Capacity: 30kgHang Load Capacity:  20kgMaterial:  PPTemperature:  -25???40?Accessories: Length Divider  SFV315Accessories: Width Divider  SFH415Drop Test(ISO2248-1985):  Pass 3 meters free fallen testImpact Test(Gardner Test): 104 in/IbsSpecifications ¨Packing Detail ¨Carton size:405310405mmQty/ctn:5pcs/ctnG.W.:3.2kgColor label on the carton to show the part colorOther Details ¨Length Dvider:SFV315B3:1/2 divider slotB2 B4:1/3 divider slotB1 B3 B5:1/4 divider slotMin. distance between slot:90mmWidth Dvider:SFH415A5:1/2 divider slotA4 A6:1/3 divider slotA2 A4 A5 A6 A8:1/6 divider slotMin. distance between slot:40mm

Product Description 200mm High Industrial Storage Bins are available in multiple sizes and colorsIndustrial Storage Bins are tough, heavy duty bins that will not get worn out like cardboard or corrugated boxesOptional dividers, as well as slots on the front for labelsIndustrial Storage Bins are made from heavy duty, high density, FDA approved PolypropyleneIndustrial Storage Bins are waterproof, rustproof and easily washable with soap and waterTechnical Datasheet Color:Red | Yellow | Blue | Green | White | ClearOutside(LWH):498.598.8153mmInside(top)(WL):85.5455mmInside(bottom)(WL):62420mmMax. Height(H):153mmUsable Height:143.6mmHanglock Height:8mmFront Size:5381mmWeight:310gLoad Capacity:30kgHang Load Capacity:20kgMaterial:PPTemperature:-2540Accessories: Width Divider  SFH115Accessories: Front Plant  SFF100Drop Test(ISO2248-1985):Pass 3 meters free fallen testImpact Test(Gardner Test):120 in/IbsSpecifications Packing Detail Carton size:510405405mmQty/ctn:20pcs/ctnG.W.:9.1kgColor label on the carton to show the part colorOther Details Width Dvider:SFH120A6:1/2 divider slotA4 A8:1/3 divider slotA2 A3 A5 A6 A7 A9 A10:1/8 divider slotMin. distance between slot:57.5mmFront Plate:SFF200

Product Description The new storage bins on shelves will truly maximize and organize your space. Manufactured from high density polypropylene, Guanyu's exclusive Storage Bins are the industry standard for quality. These bins feature a molded-in label holder, built-in rear hang lock which allows bins to tilt out for complete access when on shelving. A wide hopper front allows complete access to the contents of the bin. Edges are reinforced for addedstrength. They are designed for 300/400/450/500/600 deep shelf units, racks or standard shelving.Optional dividers are a perfect accessory to subdivide and keep parts separated as needed.Available in Yellow, Red, Blue and Clear.Technical Datasheet Color: Red | Yellow | Blue | Green | White | ClearOutside(L W H): 496 397 152.9mmInside(top)(W L): 372 455mmInside(bottom)(W L): 351 420mmMax. Height(H): 152.9mmUsable Height: 142.8mmHanglock Height: 8mmFront Size: 53 369mmWeight: 874gLoad Capacity: 30kgHang Load Capacity: 20kgMaterial: PPTemperature: -25 40 Accessories: Length Divider SFV515Accessories: Width Divider SFH415Drop Test(ISO2248-1985): Pass 3 meters free fallen testImpact Test(Gardner Test): 120 in/IbsSpecifications Packing Detail Carton size:510 405 405mmQty/ctn:5pcs/ctnG.W.:5.3kgColor label on the carton to show the part colorOther Details Length Dvider:SFV520B3:1/2 divider slotB2 B4:1/3 divider slotB1 B3 B5:1/4 divider slotMin. distance between slot:90mmWidth Dvider:SFH420A6:1/2 divider slotA4 A8:1/3 divider slotA2 A3 A5 A6 A7 A9 A10:1/8 divider slotMin. distance between slot:57.5mm

1200*1000*170mm heavy duty 3 runners closed deck hygeian plastic pallet

Art No. HD3RCWS1210C

L1200*W1000*H150/170/180mm, 3 Runners

Description

Size L1200*W1000*H150/170/180mm

Entry Type 4 Way

Style :Single and closed deck

Material:HDPE / PP

Clour:Blue, Black, Grey and other clour requested

AntislipYes, anti-slip rubber inserted

Available for rackingYes, with 8 steel tubes

Labeling optionsLogos and numbering on request, depending on volume

Load capacity

Dynamic Load 1.5T

Static Load 6T

In racking system 1T

1200*1000*975mm Folding Plastic Pallet Box,Pallet Container

Features:

1), Fabricated of HDPE.

2), All-plastic picture frame bottom.

3), Solid walls with vented deck.

4), Can be stacked without racking, assembled or collapsed.

5), Fork Truck Entry: 4-way / Hand Truck Entry: 2-way.

Model NO.: 1200x1200
Material: HDPE or PP
Load Capacity: 6t
Style: Double Faced
Static Load: 6t
Trademark: Huading
Origin: China
Type: Flat Pallets
Size: L1200*W1200*H150mm
Entry Type: 4-Way
Dynamic Load: 1t
Shelves Carrying: 1.5t
Specification: L1200*W1200*H150mm
HS Code: 392390
Product Description
Product Application

Plastic pallets HDDFCWS1212C 1200x1200x150mm(48"x48"x6") are heavy duty type,widely used in the warehouse,transportation and storage,mostly used for stacking.
Reversible Plastic pallets double faced HDDFCWS1212C 1200x1200x150mm(48"x48"x6")
Art No. HDDFCWS1212C 1200x1200x150mm(48"x48"x6"), double faced type,open decks
Description
Size 1200x1200x150mm (48"x48"x6")
Load Capacity Static Load:6T / Dynamic Load:1.5T / Racking Load:1.5T
Material HDPE / PP
Entry Type 4 ways
Style Double faced,open decks
Color Blue or any other requested color
Usage temperature -25ºC~45ºC
Antislip Yes,anti-slip rubber inserted
Available for racking Yes,reinforced by 6 to 12 pcs steel tubes
Labeling options Logos and numbering on request, depending on volume
Mark Integrated printing / silk screen printing
Loading 310pcs/40HQ
HS Code 392390
Structure characteristic: Deck type open decks,grid decks
Bottom type Double faced type
Reinforcement Reinforced by 6 to 12 pcs steel tubes
production process Injection Molding,sweating soldering

Min. Order / Reference FOB Price
100 Pieces : US $0.1/ Piece
Port : Ningbo, China
Production Capacity : 500000000000PCS
Payment Terms : L/C, T/T, D/P, Western Union, Paypal
Color : Black
Certification : RoHS, ISO, CE
Feature : Wear-resistant, Impact-resistant, Heat-resistant, Cold-resistant
Transport Package : Seaworthy
Specification : Customized
Trademark : maxcool

PVC Coil Mat with Spike Backing
1.Material: PVC
2.Thickness(mm): 14/18/20mm
3.Weight(kg/sqm):3.5/4.2/5.0
4.Color: red/black, grey/black, green/black, beige/brown
5.Feature: no-slip, comfortable, durable, waterproof

If you have any purchase requirement, you can contact me at email: alice@qdtoplit.com. And you may also visit our online company introduction at http://www.toplit.com

Looking forward to your reply.
Thanks&Regards,
Alice

Single Color PVC Mat
1.Material: PVC
2.Thickness:6mm--16mm
3.Weight:1.5kg/sqm--6kg/sqm
4.Size: 1.2*9m, 1.2*12m, 1.2*15m, 1.2*18m or customized
5.Color: red, green, blue, black, beige, brown, grey,ect
6.Feature: anti-slip, durable, waterproof, durable, easy to clean

PVC coil mat with firm backing&foam backing
1. Material: PVC
2.Thickness: 6mm--16mm
3.Weight: 1.5kg/sqm--6kg/sqm
4.Size: 1.2*9m, 1.2*12m, 1.2*15m,1.2*18m, ect
5.Color: red, green, blue, black, beige, brown, grey,ect
6.Usage: floor, door, hotel, room, shop, restaurant, hosptial
7.Feature: durable, anti-slip, anti-dust, eco-friend,waterproof and easy to clean

Pvc coil mat is used for floor , door entrance , hall , stair , etc
It is anti-dirty , anti-water , and easy clean , very neccessary in home decor .

We can supply 9mm to 15mm thickness mat , which is in roll , in piece , etc

Welcome any inquiry from all over the world .

Hdpe pipe production line consists of extruder , head die , vacuum calibrator water tank , tractor , cutting machine and stacker etc. With reasonable structure , stable property and high output , so it is ideal line to produce hdpe pipe products . 
   composition of this line 

Single screw extruder 1 set mark line single screw extruder 1 set head die 1 set  vacuum calibrating water tank 1 set 4 claws caterpillar tractor  1set planetary cutting machine 1set roller stacker1set electric controller unit 1set 

The screw and barrel are the key for whole machine , which is made of excellent alloy steel 38crmoal , and processed by nitriding and polishing with thickness 0.35-0.7 mm .  so it can be used longer time and has the advantage of wear-resistance , corrosion resistance . 

About temperature control system , it can be used the temperature sensor and controller to be controled automaticlly . The mode is cast aluminum to be heated and blowers to be cooled .

About the head die
The head die is made of alloy steel , high strength , good wear-resistance . Stable extrusion shape , so it is good to be applied to the water supply pipe products .

About the transport system , both gear and shaft parts are made of high strength alloy steel with carburizing and quenching , so it has the features of high loading capacity , stable running , low noise and high effiency etc.

PVC values of K55-72 are available in bulk order quantities. MOQ one 40ft container. Please contact for more information.