Oil well drilling stainless steel stamping cross coupling cable protector CCCP
Our cable protector can protect ESP cable or TEC cable or control line coil tubing in the oil well. And we can customize production according to your specifications or drawings, we can finish 5,000 ea cable protector within 10 days, finish 10,000 ea within 15 days, finish 20,000 ea within 25 days.
L: 2910mm, w: 25.4mm, at: 10mm, teeth number: 79 pairs.
Please refer to some details:
1- process method: no joined point
2- belt constructure: polyurethane with steel cord inside
3- g.W: 1.90kg/p
4- color: white
5- application: textile carding machines c 60
6- moq : 30pcs
7- delivery time: within 15 working days after getting payment receipt confirmed.
Trading range
1)supply kinds of textile machines(100% brand new & used), such as: draw frame, card machine, roving machine & spinning machine, blowing machine, etc.
2)supply kindly of laser engraving and cutting machine.
3)spare parts in favor of draw frame & card machine.
A.: draw frame: fa318a, fa316b, fa302, fa306a, fa311f, fa313, fa320 & dx500(made in japan), rieter series, all kinds of spare parts of draw frame are made in china.
B.: card machine: a186 series, fa201b, fa231, fa1203/203,
C: combing machine:jwf1272, jsfa286/388 etc.(made in china)
4)rubber cots for kinds of draw frame, such as rieter rsb d30/d35/d401, fa306a (shenyang hongda, china), fa316b(qingdaoyunlong, china), fa318a(qingdaoyunlong, china) etc.
5)top roller bearing sleeves made in china: switzerland rieter rsb d30/d35/d401 etc, german trutzschler hsr1000/td03 etc, draw frame fa306a, fa311f, fa315, fa316, fa317, fa318a etc.
6)bottom cleaning leather ring for draw frame.
7)kinds of trumpet mouth for draw frame.
8)high quality pure wool, without tie-in ring cleaning cloth for draw frame & roving machines.
Wire rope clips are used on wire rope eye-loop connections or complete loops, end-to-end connections where socketing or splicing is not feasible or when a temporary joint is required.
Range
a wide range of wire rope clips in specifically standardized models such as EN 13411-5 and DIN wire rope clips. also offers a wide range of other wire rope clips
Design
wire rope clips are drop forged and have a bridge with grooves to tighten the wire rope properly in the clip; the DIN wire rope clips have a malleable base, without grooves.
Wire rope clips are generally marked with:
wire rope diameter in mm or inches - e.g. 13 or 1/2
traceability code - e.g. DS21
4180 Jute Machinery Spare Parts Suppliers
Short on time? Let Jute Machinery Spare Parts sellers contact you.
Wire Rope Clips Galvanized body , made of malleable cast iron. This clip is also called Short Jaw Malleable Deka Wire Rope Clips Galvanized .
Deka Wire Rope Clips Galvanized has big strength and reliability. This kind of wire rope clamp consists of up body and down body.When using which makes the fastening force big and good reliability,there is a larger contact surface between the wire rope and bodies.
can provide seven sizes of deka wire rope clips : 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm. If you need other sizes of clips, we can make it according to your requirement.
Galv. Malleable Wire Rope Clip Din 1142
Material: Body with malleable cast, Heavy duty Type, U-BOLT with mild steel.
Finished: Galv.
Packing: Gunny Bags and then on pallets.
Minimum order quantity: 200pcs for one size.
Galv. Malleable Wire Rope Clip Din 1142
Material: Body with malleable cast, Heavy duty Type, U-BOLT with mild steel.
Finished: Galv.
Packing: Gunny Bags and then on pallets.
Minimum order quantity: 200pcs for one size.
Water Jet Loom Parts Ceramic One Way Valve Textile Machinery Spare Parts
Introduction: New type one-way valve. According to the advantages of other unilateral valves, the newly improved check valve is composed of stainless steel, ceramics and super wear-resistant materials, with long service life and good stability.
One way valve is also called check valve or non-return valve. The ceramic one-way valve of our company is a proprietary product developed for water jet looms. It is made of super wear-resistant ceramics and new materials. During the operation of the machine, a stable water pressure supply is guaranteed, which greatly increases the starting efficiency of the water jet loom and the yield of the cloth surface quality, thus increasing the economic benefits.
leading manufacturer of weaving looms and textile machinery spare parts,
Looms include: air jet loom, water jet loom, rapier loom, terry towel loom and jacquard loom.
Spare parts include: ceramic nozzle, ceramic plunger kit, ceramic check valve, leno heald, heddles, drop pin, heald wire, heald frame, reed, cross beam, cloth roller, take up roller, loom panel, reed guard, shaft, warp stop motion device, motor bracket, let off gearbox, take-up gear box, auxiliary spray electromagnetic valve seat and clip, waste selvage frame, weft frame stand, reed base and brace, selvedge assembly, roller covering tape, warp beam, the electronic components, etc.
Each weft of the water jet loom is sprayed through a nozzle, the nozzle is an important part of a machine.
The precision ceramic nozzle developed by our company is characterized by stable water line and long service life.
The ceramic nozzle is a high-precision product composed of ceramic parts and stainless steel parts. Each part of the nozzle is finished. The main part of the ceramic nozzle is called the spray body, and the middle part of the spray body is composed of a 45 degree slope with eight equal inlet orifices.
Loom machine uses high pressure jet water to carry the weft yarn and fly through the layers (upper and lower) to finish the weaving process. When the pump generates a flow of high pressure water, this water rushes to the nozzle which is designed with collective passage; this again adds pressure to the water; in the meantime, the weft yarn is inserted through the loom part ceramic nozzle, so together the high pressure water will carry the weft yarn and start on its trip.
A good loom ceramic nozzle must present high jet water flow and does not harm the weft, which otherwise will break the weft.
www.eastsongcn.com ,
Whatsapp+86 156 2102 8051 ,
Qingdao Eastsong Technology Co.,Ltd is leading manufacturer of weaving looms and textile machinery spare parts,
Looms include: air jet loom, water jet loom, rapier loom, terry towel loom and jacquard loom.
Spare parts include: ceramic nozzle, ceramic plunger kit, ceramic check valve, leno heald, heddles, drop pin, heald wire, heald frame, reed, cross beam, cloth roller, take up roller, loom panel, reed guard, shaft, warp stop motion device, motor bracket, let off gearbox, take-up gear box, auxiliary spray electromagnetic valve seat and clip, waste selvage frame, weft frame stand, reed base and brace, selvedge assembly, roller covering tape, warp beam, the electronic components, etc.
Material can be aluminum alloy,brass alloy,carbon steel,alloy steel,stainless steel.
weight range from 100g to 50kg.
Dimensions range less than 1000mm.
Optional surface treatment:Plating,Painting,Powder coating,Shot blasting,Stoving varnish.
Micro Machining or Not: Micro Machining
Place of Origin: Qing Dao, China
Model Number: CNC machining
Brand: WY TECHICAL
Keyword: CNC lathe milling and turning
Process: CNC machining
Product name: CNC turning and milling center
Name: turning and milling
Service: Customized OEM
Equipment: CNC Machining Centre
Micro Machining or Not: Micro Machining
Place of Origin: Qing Dao, China
Model Number: CNC machining
Brand: WY TECHNICAL
Keyword: CNC lathe milling and turning
Process: CNC machining
Product name: CNC turning and milling center
Name: turning and milling
Service: Customized OEM
Equipment: CNC Machining Centre
Name: CNC milling parts
CNC Machining or Not: CNC Machining
Type: Drilling, Milling, Turning, Broaching, Wire EDM, Etching / Chemical Machining, Laser Machining, Other Machining Services, Rapid Prototyping
Material Capabilities: Stainless Steel, Bronze, Aluminum, Brass, Hardened Metals, Precious Metals, Steel Alloys, plastic, carbon fiber
Micro Machining or Not: Micro Machining
Place of Origin: Qing Dao, China
Model Number: milling041
Brand: WY TECHNICAL
description: steel CNC turning parts
Material capability: aluminum, copper, stainless steel, titanium, steel alloy, plastic
Processing: High Quality CNC Turning
surface treatment: clear painting, anodizing black, sandblasted
High precision: 0.005mm
design service: available
Lead time: 15-30 days
Sample time: 1-7 days
file accepted: PDF ,IGS ,STEP
Use: Aluminum CNC Machining
Name: CNC lathing Part
CNC Machining or Not: CNC Machining
Type: Broaching, Drilling, Etching / Chemical Machining, Laser Machining, Milling, Other Machining Services, Turning, Wire EDM, Rapid Prototyping
Material Capabilities: Aluminum, Brass, Bronze, Copper, Hardened Metals, Precious Metals, Stainless Steel, Steel Alloys
Micro Machining or Not: Micro Machining
Place of Origin: Qing Dao, China
Model Number: Customized
Brand: WY TECHNICAL
Name: CNC machine service 5 axis CNC wood lathing turning parts
Material: Brass/Aluminum/Carbon steel/Copper/Steel alloy
Size: Customized Size
Keyword: CNC lathing wood parts
Quality guarantee: Factory with ISO9001
OEM Service: Available
Procession: precision and accurate making
Finish: plain
Name: CNC Machining Part
CNC Machining or Not: CNC Machining
Type: Broaching, Drilling, Etching / Chemical Machining, Laser Machining, Milling, Other Machining Services, Turning, Wire EDM, Rapid Prototyping
Material Capabilities: Aluminum, Brass, Bronze, Copper, Hardened Metals, Precious Metals, Stainless Steel, Steel Alloys
Micro Machining or Not: Micro Machining
Place of Origin: Qing Dao, China
Model Number: Customized
Brand : WY TECHICAL
Name: CNC machine service 5 axis CNC wood lathing turning parts
Material: Brass/aluminum/Carbon steel/Copper/Steel alloy
Size: Customized Size
Keyword: CNC lathing wood parts
Quality guarantee: Factory with ISO9001
OEM Service: Available
Procession: precision and accurate making
Finish: plain
Material can be stainless steel,carbon steel, alloy steel,brall,bronze,aluminum.
-Stainless steel (304/304L/316/316L/316Ti/316N/430/440A;1.4301/1.4401/1.4016;CF8/CF8M/CF3M)
Weight range from 5g to 100kg.
Dimensions range â?¤800mm.
Optional surface treatment: Shot blasting,Polishing.
-Carbon steel (1020/1025/1030/1035/1045/1055/1060;C15/C20/C35/C40/C50;1.0446/1.0501/1.0503)
Weight range from 10g to 50kg.
Dimensions range â?¤400mm.
Optional surface treatment: Plating,Painting,Powder coating,Shot blasting,Stoving varnish.
-Alloy steel(5120/5130/5132/5140/4120/4130/4140/8620)
Weight range from 10g to 50kg.
Dimensions range â?¤600mm.
Optional surface treatment: Plating,Painting,Powder coating,Shot blasting,Stoving varnish.
-Brass,Bronze,Aluminum(C85400/C85700/C95800/A03560)
Weight range from 5g to 20kg.
Dimensions range 300mm.
Optional surface treatment: Shot blasting, Sand blasting, Polishing.
Brake pad as the leading independent manufacturer of friction material, leading member, we introduced high technology from european country to develop this business in 1998 and now we are professional in this area, especially the products for truck, trailer etc.
Total production capacity is 3,500,000 sets disc brake pads per year. ANTCH Industries exports goods more then 30 countries. Today ANTCH Industries have developed more than 1500 different models for passenger car brake pad, and more than 220 different models for commercial vehicle brake pad and brake lining.
4180 Jute Machinery Spare Parts Suppliers
Short on time? Let Jute Machinery Spare Parts sellers contact you.
