This machine is used for punching metal sheet into metal cover/lid. The produced cover/lid is used for making canisters. The machine is controlled by PLC and servo motor. 1 set of punching mold will be delivered together with machine. Extra mold needs extra payment.
MAIN SPECIFICATION
Model SANYP-1000*1000
Punching pressure 80T
Speed 60times/min
Work table transverse&Longitudinal travel 1000mm
Power 3.7KW/380V/50HZ/3 phases
Weight ~2500kgs
Dimension 1600mmX1200mmX800mm
Product Description
This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. It has auto. deviation correcting system, auto. tension control system, paper edge blower device, auto. paper loading/unloading system.2pcs air-expansion shaft will be delivered together with machine.
The machine owns below features:
Siemens PLC
WeiLun touching panel.
DuoChuan servo motor
SINNE Inverter
Auto. Tension controller
Taiwan Magnetic powder brake
Main Specification
Model SANFQ-1600A
Jumbo roll max.width 1600mm
Jumbo roll max.diameter 1500mm
Finished roll min.width 50 mm
Finished roll max.diameter 1000mm
Slitting tolerance ±0.2mm
Paper range 50~550gsm
Speed 50-350m/min
Blade 7 pairs
Power 26KW/380V/50HZ/3 phases
Weight ~6000kgs
Dimension 5500mm*3500mm*2200mm
Product Introduction:
This machine is used for slitting and rewinding the jumbo paper roll into smaller paper roll with required length.
Technical parameters:
Model CM1600
Jumbo Roll max. width 1600mm
Jumbo Roll max. diameter 1200mm
Jumbo Roll core diameter 76.2mm
Finished Roll min. width 40mm
Finished Roll max.diameter 1200mm
Paper Range 45-800gsm
Speed Max170m/min
Blade 20 pairs
Power 7.5KW+1.1KW-2X0.75KW
Weight ~3.5t
Dimension Unwinder: 1700mm*3300mm*1300mm
Rewinder:1500mm*2700mm*1200mmModel
This production line adopts polyethylene (PE) material extrusion machine for film coating. The PE material is absorbed to material canister by automatic drying and material absorbing device. Then the material would be melted, after filter, the melted PE is distributed evenly onto the T shape mould. And finally it can be coated onto base material evenly.
This is the advance model of PE coating machine. It has multi-extrusion mould, multi- working station, The coating and compouding can be done by one step.
Our machine are using Siemens PLC for easy setting and operation, all parameter can be set by the touch screen.
8172 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
Introduction:
This machine is used for curling edge and seaming bottom for paper drum.
Specification:
Paper Tube Diameter Ï?280mm-Ï?450mm
Speed 60pcs/hour
Motor Power 3.75KW/380V/50HZ/3Phase
Weight ~1200KG
1. Introduction:
This machine is used for curling paper tube one top outside, expanding another top and cleaning paper tube. It is controlled by PLC. One set(5pcs) mold are with machine. Extra mold need extra payment.
2. Main specification:
Model: SLJK-260S
Tube feeding: Auto.
Tube diameter: 50-85mm
Tube height: 110-260mm
Speed: 60 pcs/min
Power: 2KW/380V/50Hz/3 phases
Air pressure: 0.4-0.6Mpa
Operator: 1 person
Weight: ~1100kgs
Dimension: 3000mm*1700mm*1750mm
China Fiber Cement Board Production Line Calcium Silicate Board Machine
Fiber Reinforced Calcium Silicate Board is also named Calcium Silicate Board, which is made from Silicon materials, Calcium materials and certain amount of fiber. It is produced after several procedures such as pulp preparation, forming, autoclaving, drying, polishing and after-processing. It has advantages such as light in weight, high in strength, good in processing and easy in decorating, and it can also has performances of heat insulation and fire fighting. So it can be widely used in inner wall and suspended ceiling of buildings, sound panel and partition board partition board of gymnasium, theater and council chamber. It can also be used for special facilities in various industries, such as sound proof wall and apron plate of highway, permanent moulding board of constructional engineering, bay plate of train and ship, movable board for house and outer board of large-scale clad plate factory.
Calcium Silicate Board is new environment-protection product with favorable market prospect and economic benefit.
Calcium Silicate Board production line
Fiber Reinforced Calcium Silicate Board is also named Calcium Silicate Board, which is made from Silicon materials, Calcium materials and certain amount of fiber. It is produced after several procedures such as pulp preparation, forming, autoclaving, drying, polishing and after-processing. It has advantages such as light in weight, high in strength, good in processing and easy in decorating, and it can also has performances of heat insulation and fire fighting. So it can be widely used in inner wall and suspended ceiling of buildings, sound panel and partition board partition board of gymnasium, theater and council chamber. It can also be used for special facilities in various industries, such as sound proof wall and apron plate of highway, permanent moulding board of constructional engineering, bay plate of train and ship, movable board for house and outer board of large-scale clad plate factory.
Calcium Silicate Board is new environment-protection product with favorable market prospect and economic benefit.
1. Brief description
This machine is used for producing multi-layer paper bags. The produced bags are used for packing grain, chemical products, cement, powder, etc. This machine is equipped with touching panel, Delta PLC, Delta Inverter, servo control system. Printing machine can be added inline and work with the machine together.
2. Technical parameters
Model: SAN-WFD720
Applicable paper reel:
Paper reel width: A: 6601220mm
paper reel Max. Dia.: B: 1250mm(paper reel dia. can make according to users need)
paper weight: C: 70140gsm
Paper reel core dia.: D: 76mm
Bag length: unlimited(touch screen control, Servo set length; if have color code, can cut by tracking color code)
Bag width:320600mm adjusting according need(can make M edge,edge width adjustable between 80-160mm)
Bag layers: 1-4layers (according to users need, can make 3 layers paper+ 1 film)
Bag making speed:30-85m/min
Power: 13KW/380±10V/50HZ/3 phase 5wires
Operator: 1-2persons
Weight: ~5000kg
Dimension:14000mm*2300mm*1900mm.
1. Introduction:
This machine is used for polishing paper tube to make tube surface smooth, and coating wax on tube surface. The polished&wax-coated tubes are use for winding high quality winding materials. The machine is controlled by Mitsubishi PLC and inverter.
1. Introduction:
This machine is used for polishing paper tube to make tube surface smooth, and coating wax on tube surface. The polished&wax-coated tubes are use for winding high quality winding materials. The machine is controlled by Mitsubishi PLC and inverter.
2.Main specification:
Video:https://youtu.be/E2EJK_BtDA0
1. Introduction:
This machine is used for polishing paper tube to make tube surface smooth, and coating wax on tube surface. The polished&wax-coated tubes are use for winding high quality winding materials. The machine is controlled by Mitsubishi PLC and inverter.
Product Introduction:
This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. The small paper rolls are used to produce edge protector, paper tube etc.It has automatic blade position adjustment , edge blowing device, edge correcting controller and hydraulic paper loading/unloading system.1 pieces of pneumatic core shafts will be delivered together with machine.
Technical Parameters:
For Your Reference.
Model
SANJSR-02
Jumbo roll max.width
1600mm
Jumbo roll max.diameter
1500mm
Jumbo roll core diameter
76.2mm
Finished roll min.width
50 mm
Finished roll max.diameter
1300mm
Paper range
50~700gsm
Speed
Max 250m/min
Blade
20 pairs
Power
7.5KW/380V/50HZ/3 phases
Weight
~3000kgs
Dimension
Unwinder:2000mm*3500mm*1200mm,
Rewinder: 3000mm*2500mm*1500mm
PLC Control Automatic Parallel Paper Tube Making Machine
The machine is used for producing parallel paper tubes automatically. It consists of paper stand, paper edge grinding device, gluing device, paper cutting device, tube forming, tube discharging device, and a simple slanting stacker. The machine is equipped with Siemens PLC, Inverter. 2PCS mandrel is with machine.
Technical parameter:
Parameters:
Model SANPT16-50
Max. Size of jumbo paper roll 1020 mm X 1300 mm (Width*Dia.)
Max. Paper tube length 1200mm,1600mm,1800mm
Paper tube inner diameter 16 - 50 mm
Paper tube thickness 2-10 mm
Paper gram mage 200-550 gsm
Production speed 23-26/min
Brief Descriptions:
cardboard tube machine is used for producing different diameter paper cores through changing core/tube shafts.
It consists of paper stands, gluing stands, wax applying stand, tube forming device, online cutter and automatic tube falling bracket.
This MC adopts drive shafts to drive winding heads.
Drive shaft connecting with universal joint is more powerful and durable than drive chain, so MC runs very stably, and the produced tubes have very high strength.
This technology is the most important to paper tube MC. 2pcs core shaft will be delivered with machine.
The customer decides tube shaft diameter.
Technical parameters:
Model: CM-M Inner diameter of tube: 50mm-260mm
Thickness of tube wall: 1mm-15mm Cutting mode: automatically cutting with round knife
Speed: â?¤15m/min
Quantity of shafts: 2pcs
Power: 11KW, 380V,
Weight: 2.2MT
Dimensions: 4,000mm x 1,700mm x 1,600mm
How the Machine Works?
https://www.youtube.com/watch?v=VAR1lznSxU4
1. Brief Introduction:
The convolute paper tube making machine is used for producing parallel paper tubes automatically.
It consists of paper stand, paper edge grinding device, gluing device (automatic cycle system with diaphragm pump), auto-sprinkler system, paper cutting device, tube forming, tube discharging device.
The machine uses Panasonic servo motor for winding tubes and fixing the position of mandrel. And it also uses cylinder to fix the position of every paper sheet before paper sheet is conveyed into tube mandrel groove.
This design can guarantee the machine running smoothly and stably, reduce rejected products. The machine is equipped with Siemens PLC, Delta Inverter.
The produced tubes are mainly used in metallurgy industry, some tubes are for producing clothes racks and pencils.
2. Technical parameter:
Model: SANPT16-76
Max. Size of jumbo paper roll: 1600mmx1300mm (Width*Dia.)
Max. paper tube length: 1200mm
Paper tube inner diameter: 16-76mm
Paper tube thickness: 2.5-10mm
Applicable paper grammage: 180-300gsm
Production speed: 480-720pcs/hour
Power supply: 4.61Kw, 380V, 50Hz
Machine dimension: 1850x1780x1460mm
Full Automatic Paper yarn Cone Making Machine for Paper Cone Manufacturer is a fully autopaper cones machinery for textile industry. It is controlled by Delta PLC. It consists of paper cone winding unit, electric heating drying oven, and paper cone finishing unit. The whole paper cone production process is as follows, Jumbo paper reel feeding Inside and outside printing Paper edge grinding paper cutting paper cone winding & trimming Paper cone drying Unfinished products collecting V-shaped notching Line pressing Head curling (Bull nosing) Grinding Final products collecting.
Technical parameters
Speed: 48pcs/min
Cone size: 5deg.57, 4deg.20 or 3deg.30 (optional)
Applicable paper: 320-450gsm
Applicable glue: white glue
Compressed air: 1.2m3/min, 0.8MPa
Power: 47KW/380V/50HZ/3Phases
Operator: 2~3 persons/shift
Weight: ~15T
Needed working space: 14000mm X 8000mm X 5000mm
How the machine Works?
1. Introduction:
This automatic jumbo paper roll slitter and rewinder machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. The small paper rolls are used to produce cardboard paper edge protector, cardboard paper tube etc. It has automatic blade position adjustment, edge blowing device, edge correcting controller and hydraulic paper loading / unloading system. 2 pieces of pneumatic core shafts will be delivered together with machine.
The machine owns below features:
Mitsubishi PLC.
Mitsubishi touching panel.
Mitsubishi Inverter
Mitsubishi MT40 Tension controller
Mitsubishi Detector
Taiwan Magnetic powder brake
2. Main specification:
Model: SANJSR-02
Jumbo roll max.width: 1800mm
Jumbo roll max.diameter: 1500mm
Jumbo roll core diameter: 76.2mm
Finished roll min.width: 50mm
Finished roll max.diameter: 1000mm
Paper range: 40~600gsm
Speed: Max 230m/min
Blade: 20pairs
Power: 7.5KW/380V/50HZ/3phases
Weight: ~3000kgs
Dimension: Unwinder: 2000mm*3500mm*1200mm
Rewinder: 3000mm*2500mm*1500mm
8172 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
