Find Verified Computer Ram Rom Chips Boards Suppliers, Manufacturers and Wholesalers

Ram Board– Breathable Water Resistance Floor Protection Paper

Thickness:0.9mm ,1.2mm or custom

Length:30m or custom

Roll type

Environmental protection: produce with environmental protection techniques and green materials, unscented, non-staining, reusable, 100% recycled.

Convenience: light material,packaged as roll,lays out fast, easy to handle, clean and recycle, save on labour and damage repair.

Water resistance: good absorption of water , provides the floor protection against water, paint and other liquid leakage during the construction site.

Breathablility: paper fiber has plenty of pores which are greater than diameter of the gas . It is engineered to breathe. This perfect balance of vapor permeability and density allows construction activities to continue and improves engineering quality.

Skid resistance: antiskid design under the paper, increase the construction safety co-efficient.

Folding&abrasive resistance: fiber thin , flexible and firm, paper board resistant to fold and abrasion, that creats an unmatched barrier for walls , baseboards, and perimeter etc.

Heavy-duty performance: thick paper, highly resistant to abrasions and scratches from tools or heavy machinery, it is not easy to damage , blotchy, provide protection for a long time .




-

ACE interactive white board

Specification:
Receiver/Sensor:
1. Effective working area: 100 inches at max
2. Technology: IR+Ultrasound with Brandland's VPOT
3.USB device class: Miscrosoft Standard pen device
4. Sampling frequency: 70Khz
5. No. of receiving sensors: 2 units
6. IR receiving sensor: 1 unit
7. Power: USB 5 volt/ 100mA

Digital pen:
1. Power: 3.7V/180m AH
2. Battery: Rechargeable Rithum. polymer battery
3. Recharging terminal: Earphone typed rechargeable jack
4. Button: 2 buttons, left button, eraser button
5. Battery monitoring: 2 step LED Indicator
6. Full recharging time: 1 hour
7. Continuous pen operating time: 20 hours
8. Power saving mode: Automatic power saving mode after 30 sec idle time
9. USB recharging mode: USB+Earphone typed jack
10. Dimesnion(HeightxDiameter): 130mmx15mm

Interace:
1. Computer: IBM PC/AT or IBM PC compatible(with CD-ROM drive)
2. CPU: Intel Pentium or above or Intel CPU comptaible TYPE
3. Interface: USB 2.0 full speed or USB 1,1
4. Operating system: Windows XP/ VISTA/ Windows
5. RAM: 512MB or more

Environment
1. Humidity: 0-90RH + 35íµ
2. Recommended operating tempreture: 0íµ to 40íµ

SW Bundled
1. PenOnPC/Brandland EWB Calibration: Calibration SW
2. Ink Noted: Window Journal(for Windows 2000/XP)
3. ACE Board/Brandland/Electronic whiteboard: Board softare

Feature:
1. Smoothness of character apperance
2. Easy to Install
3. Easy to maintain
4. Powerful functions for bundled board software


1pc/box(20x16x6cm), 20pcs/outer carton(40x30x40cm)

Architecture: Such as building wall board, decoration board, housing, office, public building interlayer, commercial decoration shelf, non-dust room board, ceiling plate, etc.
Advertisement: Such as screen printing, computer lettering, ad board, etc.
Industry: cabinet board, chemical industry antisepticizing project, thermoforming for refrigerator, for temperature keeping for environment protection, etc.
Transportation: Such as steamship, aeroplane, carriage, train compartment, roof shed, case core layer, inner upholster, etc.

Coordinate measurement machine

A machine
- ncf1087 bridge coordinate measuring machine
- calibrate ball with support base
-uk renishaw ucc lite control system
430, 000/1set

B. Computer system
- minimum configuration: pentium 3.0 ghz/1gb ram/120gb hard disk/128mb graphic card /17color lcd monitor/ window»s os
- hp color deskjet printer 10, 000/1set

C. Usa software system
America rational-dims software package (for windows xp) 80, 000/1 set

D. Probe system
- renishaw ph10t manual head 100, 000/1 set
- renishaw tp200 high accuracy probe 30, 000/1 set
-renishaw probe styli kit 3, 000/1 set

Eú« voltage stabilizer 3, 000/1set
F machine calibration standard tools
Gauge blocks, 20, 000/set
G. Installation at customer site
System installation includes start-up, adjust and metrology test. The metrology test will be performed according the ú¿gb/t16857.2-1997ú¬standard regulation and it equal to iso 10360-2. The buy afford trip ticket and room and board fees.

H application training

- training on the cmm operation & application 5-8 working days at the user»s site. The buy afford trip ticket and room and board fees.

Warranty
12 months guarantee free of charge after final acceptance. The buy afford trip ticket and room and board fees.


Carton

1.3 Million High Resolution Camera
Present prompt photo-taking
Strong present writing and editing
Fast drying and water proof
Openly million designs saved
Size: 470mm x 280mm x 257mm
Input voltage: 220V 50Hz or 110V 60Hz
Net weight: 3.5kg
Electric power: 20W
It is made of plastic mould
Recommended computer specification:
CPU Intel Celeron 600MHZ, 128M memory,
above 1G hard disk, two USB port, one CD-ROM; Windows XP system.


Gross weight: 8kg
Packing dimension: 598*346*334mm

Print millions of designs on flowers and other smooth surfaces
1.3 Million High Resolution Camera(mornitor)
Present Prompt Photo-taking
Strong Present word edit and photo edit
Fast Drying And Water Proof
Openly Million Designs Saved
Creative Fashionable
Size: 420mmx280mmx250mm
Input voltage: 220V 50Hz or 110V 60Hz
Net Weight: 3.5kg
Electric power: 20W
computer Specification: CPU Intel Celeron 600MHz,
128M memory, above 1G hard disk, two USB port,
one CD-ROM; Windows 98 /2000/ XP system


Gross weight: 8kg
Packing dimension:598*346*334mm

Print millions of designs on nails, mobile phone, ornamental articles and other smooth surfaces.
It can print 5 fingers at once
1.3 Million High Resolution Camera
Present Prompt Photo-taking
Strong Present word edit and photo edit
Fast Drying And Water Proof
Openly Million Designs Saved
Creative Fashionable
Size: 420mmx280mmx250mm
Input voltage: 220V 50Hz or 110V 60Hz
Net Weight: 3.5kg
Electric power: 20W
computer Specification: CPU Intel Celeron 600MHz,
128M memory, above 1G hard disk, two USB port,
one CD-ROM; Windows 98 /2000/ XP system
Color printer: 4800x 1200dpi
It is made of plastic mould

Gross weight: 8kg
Packing dimension:598*346*334mm

Print millions of designs on candles in square, round, pillar shape, and other surfaces
1.3 Million High Resolution Camera
Present Prompt Photo-taking
Strong Present Write And Edit function
Fast Drying And Water Proof
Creative Fashionable
Size: 540mm*320mm*345mm
Net weight:3.5KG
Electric power: 20W
Input Voltage: 110V 50Hz or 220V 60Hz
The allowed maximum size is 140mm diameter and 220 length for pillar candles;140*220*200mm for square candles.
Round candle can roll when it is printed.
computer Specification: CPU Intel Celeron 600MHz, 128M memory, above 1G hard disk, two USB port, one CD-ROM; Windows 98 /2000/ XP system


Gross weight: 8kg

Transportation:such as steamship,aeroplane ,carriage ,trainer compartment ,roof shed ,case core layer ,inner upholster,etc.
Architecture:such as building wall board ,decoration board ,housing ,office ,public building interlayer ,commercial decoration shelf ,non-dust room board,celling plate ,etc.
Advertisement:such as screen printing ,computer lettering ,ad board ,etc.
Industry: such as chemical industry antisepticizing project ,thermoforming,for refrigeratory,for temperature keeping ,for environment protection .etc.
Other applications:such as mould plate ,sports equipment,breeding equipment ,seashore wet-proof facility ,water-fast material ,art material ,various interlayer,etc.
Production scope :thickness 3-50mm,width 1220mm*2440mm.

Nail art digital painter

Print millions of designs on nails, mobile phone, ornamental articles and other smooth surfaces.
It can print 5 fingers at once
1.3 million high resolution camera
Present prompt photo-taking
Strong present word edit and photo edit
Fast drying and water proof
Openly million designs saved
Creative fashionable
Size: 420mmx280mmx250mm
Input voltage: 220v 50hz or 110v 60hz
Net weight: 3.5kg
Electric power: 20w
Computer specification: cpu intel celeron 600mhz,
128m memory, above 1g hard disk, two usb port,
One cd-rom; windows 98 /2000/ xp system
Color printer: 4800x 1200dpi
It is made of plastic mould



Packing dimension:598*346*334mm
Gross weight: 8kg

Product Description

Usual sheet width:
915, 1200, 1560, 1830mm
Usual sheet thickness:
4-20mm

Application of Boards:
1. Architecture decoration industry
Building formwork board, outdoor board, indoor decoration board, residential house board, office board, separation wall of public building, commercial decoration frame, board used in dust-free room, etc.
2. Household decoration
Bathroom cabinet board, kitchen cabinet board, furniture board, home decoration board, various household shelves, etc.
3. Advertisement industry
Screen printing, computer engraving, advertisement board, exhibition plate, logo plate, etc.
4. Transportation industry
Ship, plane, bus, and train, floor covering, core layer, indoors decoration plate, etc.
5. Industrial application
Suitable for rot-proof project in chemical industry, thermal forming, refrigeration warehouse, etc.

Technical Parameter
Model TPM-915 TPM-1220 TPM-1560 TPM-1830
Width 915mm 1220mm 1560mm 1830mm
Thickness 3-20mm 3-20mm 3-25mm 3-25mm
Extruder SJSZ80/156 SJSZ80/156 SJSZ80/173 SJSZ92/188
Motor power 75KW 75KW 110KW 132KW
Capacity 350Kg 35oKg 500-600Kg 500-600Kg

Machine List
SJSZ Series Extruder
Mould
Calibration Table
Cooling Roller Bracket
Haul Off
Cutter
Stacker

Plastic pipe production machine WPC profile production machine PVC foam board production machine Water tank blow moldin Molding Machineg machine HDPE pipe production machine PVC pipe production machine Plastic sheet production machine All auxiliaries



Electric System:
1.The electric control system uses Siemens(Germany) and Mitsubishi(Japan).PLC computer control system with touch screen control board.
2.The low-voltage electrical apparatus comes from Siemens(Germany), and Schneider(France).
Features of blow molding machinery:
l Three layers of blow molding machinery can make two/one layer of water tank by the same machinery
l All electrical components using SIEMENS brand name.
l Two pulling rods clamping structure with stable operation
l Two hydraulic stations by SERVO drive to acquire energy saving
l PLC touch screens(wall thickness and machinery operation touch)
l Head die with spiral flow channel design without weld point
l Pneumatic system has function of silencing

Electric System:
1.The electric control system uses Siemens(Germany) and Mitsubishi(Japan).PLC computer control system with touch screen control board.
2.The low-voltage electrical apparatus comes from Siemens(Germany), and Schneider(France).
Features of blow molding machinery:
l Three layers of blow molding machinery can make two/one layer of water tank by the same machinery
l All electrical components using SIEMENS brand name.
l Two pulling rods clamping structure with stable operation
l PLC touch screens(wall thickness and machinery operation touch)
l Head die with spiral flow channel design without weld point
l Pneumatic system has function of silencing

Electric System:
1.The electric control system uses Siemens(Germany) and Mitsubishi(Japan).PLC computer control system with touch screen control board.
2.The low-voltage electrical apparatus comes from Siemens(Germany), and Schneider(France).
Features of blow molding machinery:
l Three layers of blow molding machinery can make two/one layer of water tank by the same machinery
l All electrical components using SIEMENS brand name.
l Two pulling rods clamping structure with stable operation
l PLC touch screens(wall thickness and machinery operation touch)
l Head die with spiral flow channel design without weld point
l Pneumatic system has function of silencing

Electric System:
1.The electric control system uses Siemens(Germany) and Mitsubishi(Japan).PLC computer control system with touch screen control board.
2.The low-voltage electrical apparatus comes from Siemens(Germany), and Schneider(France).
Features of blow molding machinery:
l Three layers of blow molding machinery can make two/one layer of water tank by the same machinery
l All electrical components using SIEMENS brand name.
l Two pulling rods clamping structure with stable operation
l Two hydraulic stations by SERVO drive to acquire energy saving
l PLC touch screens(wall thickness and machinery operation touch)
l Head die with spiral flow channel design without weld point
l Pneumatic system has function of silencing

Electric System:
1.The electric control system uses Siemens(Germany) and Mitsubishi(Japan).PLC computer control system with touch screen control board.
2.The low-voltage electrical apparatus comes from Siemens(Germany), and Schneider(France).
Features of blow molding machinery:
l Three layers of blow molding machinery can make two/one layer of water tank by the same machinery
l All electrical components using SIEMENS brand name.
l Two pulling rods clamping structure with stable operation
l Two hydraulic stations by SERVO drive to acquire energy saving
l PLC touch screens(wall thickness and machinery operation touch)
l Head die with spiral flow channel design without weld point

l Pneumatic system has function of silencing

Electric System:
1.The electric control system uses Siemens(Germany) and Mitsubishi(Japan).PLC computer control system with touch screen control board.
2.The low-voltage electrical apparatus comes from Siemens(Germany), and Schneider(France).
Features of blow molding machinery:
l Three layers of blow molding machinery can make two/one layer of water tank by the same machinery
l All electrical components using SIEMENS brand name.
l Two pulling rods clamping structure with stable operation
l Two hydraulic stations by SERVO drive to acquire energy saving
l PLC touch screens(wall thickness and machinery operation touch)
l Head die with spiral flow channel design without weld point

l Pneumatic system has function of silencing

Electric System:
1.The electric control system uses Siemens(Germany) and Mitsubishi(Japan).PLC computer control system with touch screen control board.
2.The low-voltage electrical apparatus comes from Siemens(Germany), and Schneider(France).
Features of blow molding machinery:
l Three layers of blow molding machinery can make two/one layer of water tank by the same machinery
l All electrical components using SIEMENS brand name.
l Two pulling rods clamping structure with stable operation
l Two hydraulic stations by SERVO drive to acquire energy saving
l PLC touch screens(wall thickness and machinery operation touch)
l Head die with spiral flow channel design without weld point

l Pneumatic system has function of silencing

Breathable Water Resistance Floor Protection Paper
Thickness:0.9mm or custom

Length:30m or custom

Roll type

Environmental protection: produce with environmental protection techniques and green materials, unscented, non-staining, reusable, 100% recycled.

Convenience: light material,packaged as roll,lays out fast, easy to handle, clean and recycle, save on labour and damage repair.

Water resistance: good absorption of water , provides the floor protection against water, paint and other liquid leakage during the construction site.

Breathablility: paper fiber has plenty of pores which are greater than diameter of the gas . It is engineered to breathe. This perfect balance of vapor permeability and density allows construction activities to continue and improves engineering quality.

Skid resistance: antiskid design under the paper, increase the construction safety co-efficient.

Folding&abrasive resistance: fiber thin , flexible and firm, paper board resistant to fold and abrasion, that creats an unmatched barrier for walls , baseboards, and perimeter etc.

Heavy-duty performance: thick paper, highly resistant to abrasions and scratches from tools or heavy machinery, it is not easy to damage , blotchy, provide protection for a long time .





-

The basic material of CON-PEARL sheets is a three-dimensionally moulded central sandwich layer on-to which a smooth plastic sheet is laminated on both sides. The thermal moulding of the central sandwich layer of thimbleshaped structure patterns creates numerous cavity spaces.

It is from this basic principle that the main product properties derive: extremely low weight, excellent rigidity and remarkable dampening properties. This combination – and the diversity of design forms – make CON-PEARL the perfect material for many applications.

02 Technical Data

technical description

– polypropylene
– extremly flexible
– food regulation compliant
– thermal and acoustic insulating
– printable
– low weight
– extremely foldable strip hinges
– chemically resistant
– recyclable

03 Material Properties



form
formplain (closed), board, sandwich/sandwich core
optics/haptics
appearancesilk matte, opaque
colourgrey
hapticssmooth, hard
light transmissionno transmission


properties
classification by standard: DINDIN 12127, DIN 3037, DIN 5084, DIN 75200, DIN 9001
classification by standard: ENEN 12127, EN 5084, EN 9001
classification by standard: ISO ISO 9001
ecological propertieseasy to recycle
material type
plasticPP polypropylen
04 Dimensions (available Sizes)



Dimensions (available Sizes)
WidthMax 1600 mm
Height (thickness)1 mm-12mm
LengthCustom
05 Weight



Weight
Weight per m²350gsm-3000 gsm



-