Find Verified Pvc Foil Suppliers, Manufacturers and Wholesalers

PVC wall panel:
PVC wall panel product introduction:
PVC wallboard-It is a thermoplastic resin polymerized by vinyl chloride under the action of an initiator.
PVC wall panel product advantages:
1. Environmental protection, energy saving, and reusable.
2. Anti-moisture, anti-corrosion and anti-moth.
3. Strong hanging force, can be used for hanging load in various occasions.
4. Beautiful, easy to scrub and easy to maintain.
5. Good toughness, light weight, length can be cut arbitrarily without loss and waste.
6. One-piece molding, easy installation, short construction period, no requirements for construction environment.
7. Fire and flame retardant.
8. Sound insulation and noise reduction. Can effectively reduce noise pollution.
9. Rich colors. You can customize the color you like.
10. Outstanding three-dimensional sense. The super three-dimensional sense gives a luxurious visual impact.
PVC wall panel renderings:

Product features and advantages:
1. Strong texture and soft handle. The quality of fabric texture mainly depends on the stability of formula, embossing roller and embossing machine, which is realized by the stable cooperation among the three. The pure hand carved embossing roller presents the effect of fine embossing and uniform color. The temperature and speed of imported equipment are fully automatic controlled. The color of wallpaper produced is stable and without color difference. With the imported raw material formula, the fabric texture effect with delicate handle and soft luster is finally obtained.
2. It is realistic and natural with high degree of simulation. One of the important characteristics of high quality deep embossed wallpaper is its high degree of simulation, which means that the pattern is restored to the degree of real things. The key technology is still the processing of embossing process and the application of color gradient. The higher the simulation degree is, the more realistic and natural the decoration effect will be.
3. It has clear layers and fine texture. The stronger the sense of hierarchy, the more visual impact, the more luxurious the decoration effect. The key technology is that the engraving level of the embossing roller is used in combination with the embossing machine. The hand carved embossing roller has a delicate and mellow molding effect, clear layers and clear texture, especially the real and flexible processing of the edges and corners. For example, petals, pistils, stems and leaves are clearly visible, flexible and well-organized. At the same time, the extreme use of color separation and color matching is also the main factor to highlight the sense of hierarchy.
4. The color is pure and harmonious. Color is the lifeline of the final effect of wallpaper, and is the most critical technology of wallpaper. The influencing factors include three aspects: color matching, color separation and color matching. Pure color matching means that the color effect is close to the natural color, reflecting the real and vivid effect. Color separation naturally means that all kinds of colors are superimposed layer by layer during printing, which finally shows a good transition and gradient effect. Color matching coordination refers to the coordination of various colors, especially the color matching of shading and pattern, to be comfortable and high-grade, so as to achieve a lasting and pleasant decorative effect.

Pvc percent: 35%-80%
Surface processing : ordinary glossy, high glossy, transferred(hot stamp) and laminated panel
Thickness :4. 5mm-12mm
Width : 10-30cm
Color: more than 100 kinds of patterns.


Package : pe shrink film / carton

1. High quality for medicine and chemical powder packaging
2. Passed iso9001
3.Volume: 50ml, 100ml, 3l, 15l, 30l
4.Material: aluminum
5. Set: rubber stopper+ aluminum cap+ aluminum bottle
6. Package: pe bag, in carton box
7. Payment item: tt, lc
8. Delivery time: 15 days after deposit

Carton box:77*46.5*47cm
Quantity:30sets/box
G.W:13.26kg

1. High quality for medicine and chemical powder packaging
2. Passed iso9001
3.Volume: 50ml, 100ml, 3l, 15l, 30l
4.Material: aluminum
5. Set: rubber stopper+ aluminum cap+ aluminum bottle
6. Package: pe bag, in carton box
7. Payment item: tt, lc
8. Delivery time: 15 days after deposit

Carton box:71*48*40.5cm
Quantity:6sets/box
G.W:9.17kg

Aluminum sheet as below:

Alloy: 1050, 1060, 1070, 1100, 1200, 1035, 2024, 2a12, 2014, 2a14, 3003, 3004, 5052, 5a02, 5154, 5a03, 5456, 5a05, 5005, 5083, 5086, 5754, 6061, 6063, 6082
Temper: o, h14, h24, h18, h26, h22, t4, t6, t651
Thickness: from 0.2mm to 10mm
Width: up to 1600mm
Length: up to 6000mm
Packing: Wooden/veneer case, wooden/veneer pallet
Model: Baodi
Unit price/payment: As negotiated
Hs code: 7606
Trademark: Baodi
Origin: China
Min. Order: 2 tons
Transportation: Within 30days




Wooden pallet

Aluminum tube/aluminum pipe

Alloy: 1050, 1060, 2a11, 2017, 2a12,
2024, 3003, 3a21, 5a02, 5a05, 5456,
5052, 5083, 6061, 6063, 6082, 7a04, 7075, 7a09
Temper: o, h112, t4, t6, f
Od: 3-400mm
Wall thickness: 0.1-50mm
Length: up to 6100mm

Packing: By wooden pallet
Unit price/payment: Fob, cfr, cif
Min. Order: 1 ton
Transportation: Within 30days


Wooden pallet

Aluminum sheet

Wooden cases, pallets and so on

Copper sheet

Packed in pallet

Specs. : Size: 1-3mm( 8-16 mesh ) ; Moisture: max. 7% ; no any additives ; no foreign matters ; fully comply with EU food regulations.
Packing : 10 KGS x 2 aluminium foil bags per carton ; 14.4 MTS/20'FCL

Specs. : pure garlic ;100-120 mesh ; moisture: max.7% ;color: white ; so2:max.50ppm; no foreign matter and additives ; fully comply with eu food regulation
Packing: 12.5kgs x 2 aluminium foil bags ; 18 mts/20'fcl

Specs. : size : minced ,  8-16, 16-26,  26-40, 40-80mesh; moisture: max.7% ; so2:max. 50ppm; no foreign matter and additives ; fully comply with eu food regulation .
Packing: 12.5kgs x 2 aluminium foil bags ; 18mts/20'fcl

A special brass alloy is hot rolled to eliminate plate tensions, cold rolled to the tightest tolerance and flattened. It enables you to produce sophisticated three-dimensional sculptured embossing or combination embossing or foil stamping dies. Our brass plate is with good mechanical durability, dimensional stability, minimum thermic expansion and exceptional heat conductivity.

Kind of thermoplastic elastomer materials widely used in construction door and window sealing strips application made of SEBS rubber with PP granules It has rubber properties but can processing by normal plastic injection or extrusion machine Elastic and ageing-resistant property is much better than traditional PVC material, that is the tend PVC will replace by TPE, new generation materials.

iBond i496 is general purpose super glue. It has good performance on PVC bonding, metal bonding.

Commodity name Metal fishing jig L0401
Material Lead
Weight 180G200G220G250G
Length 150mm160mm170mm180mm
Eye not 3D
Hook As customer request
Action slow sinking
Packing PVC bag
MOQ 100pcs

Key Specifications/Special Features:

This materials can extrude with traditional extrusion machine and can reprocessing 5 to 7 times while the property is no change Widely used in construction door and windows sealing strips With good UV-resistant Ageing-resistant Environment-friendly New generation materials replace PVC materials

1.Pvc/metal jacket.
2.Metal top & bottom with red plastic cap.
3.Discharge time:300-600min
4.Delivery time:12 days after the deposit.
5. T/t , l/c
6.Oem available.

2pcs/shrink pack
12pcs/inner box
24box/carton
1100ctn/20fcl.

Hightit line of UV light cure adhesives for disposable medical equipments instantly cure under UV light. They will become shock resistance, heat-resistant flexible films. They can bond a variety of substrates, such as PVC, polycarbonate, ABS, acrylic, polyether ketone, polystyrene, nylon, polyimide, glass, metal. They are widely used in medical device industry.

our glue pass the ISO10993 medical grade certification.

Plastic air blow guns are made of optimum quality PVC and stainless steel by precise mold and perfect workmanship.Due to the features of easy handling,comfortable holding,flexible air pressure etc.,they are widely used with pneumatic equipment as efficient cleaning tools to blow off debris of different materials remaining on special surfaces which are not easy to be cleaned by usual ways.

1. Thermal insulation foam board:
Eps(expanded polystyrene), xps(extruded polystyrene ) insulation board for building wall, roof, ground thermal insulation layer etc. Fireproof phenolic foam and pu thermal insulation for floor and inner wall and roof.

2. Sandwich panel:
Mid section is insulation foam board(eps.Xps, pu, phenolic foam, rock wool board)
With outside composite(galvanized sheet, megnesium oxide board, calcium silicate board, aluminium foil, aluminium sheet and so on)
Xps sandwich panel, mgo sandwich panel, pu sandwich panel and rock wool sandwich panel for wall and roof of clean room, warehouse, cold room and refrigeratiom house etc.

3. Insulated building wall panels:
Decorated surface with firproof foam/ thermal insulation foam. Any kind material can be customized for a exterior wall decoration insulated composite panel.
Shandongwanlongatgmail.Com

Pallet or as your request

Standard Item Grade One
Color Shade, (Pt- Co ) max 180
Epoxy Value, % min 6.2 ( it is equivalent to 6.8 % by ASTM D1652-04)
Density ( 20deg.c) g /cm3 0.985~0.995
Acidity , mg KOH/g max 0.50
Iodine Value % max 6.0
Flashing Point, deg.c min 290
Loss upon Heat % max 0.3


Iron drum or flexitank or IBC tank

Properties white to light yellow powder , high gloss , low odor , good discoloration resistant , smoke inhibiting , easy incorporation and dispersion .
Application it 15 widely used in pvc plate , sheet and articles to improve the blow moldability , extrudability and calenderability in production and the service life of finished product . Its properties are superior to those of organic tin series heat stabilizer , but its cost is lower .



Pe bag with lined pe film

1.Conforms to DIN3352,BS5163,SARS664/665íú
2. Face to face dimensions conform to EN558 SARS664íú
3. Nominal pressure: 1.0mpa , 1.6mpa, 2.5mpa
4. Socket end: fitted with NBR/EPDM rubber seat to suit PVC-PIPES
5. test and inspection : DIN3230,BS6755íú
6. Suitable media: water, neutral liquid.
7. Working temperature: NBR<80, EPDM,100
8. Operator: handwheel, nut, extension stem, gear operator.


Cages and wooden box.

1.Product description

Newfill-0201, fine is precipitated barium sulphate with a defined particle size from highly purified solutions of barium salts to sodium sulfate. Newfill-0201, fine has all the characteristics of remarkable technological value (brightness, fineness, oil absorption, dispensability, high pvc, aging resistance, low abrasiveness ect). Newfill-0201super fine is free of impurities such as quartzes etc.

These products can be used for powder coatings, industrial paints, enamels, printing ink and plastically materials, and photosensitive papers, can be used quite successfully in adhesives, coatings and sealants.

2. Product specification


Appearance white powder
Barium sulfate (%) = 98%
Whiteness: =97±0.5
Total iron (%) =0.006
Brightness (%) >97.0
Sulfide content (%)

Cork wallpaper product introduction
1. Product name:
Cork wallpaper is a wall decoration material made of natural cork bark as raw material, using high-tech means, and deep processing of multiple special processes. Moreover, the raw materials of cork wallpaper are commonly known as "soft gold", precious and rare, and make your decoration plan and living room more elegant. Cork wallpaper itself is unique in that it is not moldy, does not hide dirt, does not generate dust, does not generate static electricity, and is not easy to burn, so that the wallboard has more advantages than similar products.
2. Product features and advantages:
(1) Wide application. In Europe, cork wallpaper is widely used in living areas, such as children's rooms, kindergartens, bedrooms and so on. In China, the most familiar cork products are the cork stoppers of wine bottles and the heads of badminton shuttlecocks. Little is known about the use of cork in decorative materials. However, you can see wall decorations made of cork in some shops or bars. This kind of cork wall panel can be used as a background wall decoration behind the TV in the home or used at the entrance. 2. Sound insulation and noise reduction. The wallpaper made of cork can meet people's requirements for warmth, softness, harmlessness to the human body, and low noise, especially the sound insulation function of cork wallpaper.
(2) Durable. Cork wallpaper paper has super toughness, abrasion resistance and not afraid of insects.
(3) Popular trends. Cork wallpaper has been in the market for more than a few years, and the customers who initially bought cork wallpaper are mostly those who have lived abroad or have a soft spot for cork. Now with the improvement of people's living standards, the requirements for home decoration are greatly improved, and cork has faintly become a new trend of wall decoration materials.
(4) Earthquake resistance and shock absorption. Cork wallpaper is a kind of lightweight material. It has a special cell structure. There are 40 million cells per cubic meter. They are arranged in a honeycomb shape, and the cells are filled with resin. Therefore, it has a great shock absorption. , Sound insulation function.
(5) Fire and flame retardant. Cork wallpaper also has a good heat insulation effect, and it is a material with B2 fire resistance. Its thermal insulation performance is about 20 times that of brick-concrete structure.
(6) Self-cleaning function. Because cork is composed of cells, it has good elasticity and can adapt to different pressures, and its cells are filled with cork resin and other components, so cork wallpaper can well block the infiltration of liquids and other substances.

Paper woven wallpaper, paper thread woven wallpaper first cut the raw paper into strips, then weave it by hand or machine, color it by machine, and finally use double-layer bonding technology. Paper woven wallpaper has a strong sound-absorbing effect due to its surface unevenness, which makes people feel stable and comfortable in this environment. Paper woven wallpaper is mainly used in Chinese style decoration, entertainment clubs, high-end tea rooms, high-end hotels and other places. .
Precautions for paper woven wallpaper construction
1. Pay attention when adjusting the glue, because the paper-woven wallpaper is heavier than the general wallpaper, the glue can be thicker than usual and the ratio of water to water is 1:0.8~1.
2. Paper-woven wall paper is usually glued on the wall, and the paper back is wiped with water. If you need to stick to the top, you can use the paper back glue to facilitate the construction, but it must not overflow the glue. The surface should not be wiped with water, because some paper-woven wallpaper will lose color if it is wetted with water. If there is any overflow, it will leave offset printing.
3. Paper-woven wallpaper construction splicing joints are generally divided into two types, the ones with fine texture can be directly spliced, and the rough texture is recommended to use the edge cutting effect will be better.
4. Since the paper is relatively heavy, hollowing will occur when wrapping the male corners. You can use the back of a knife to draw a line along the male corners, and the male corners will be wrapped perfectly and not easy to hollow.
Precautions for posting on painted surfaces
In order to increase the overall visual effect, many furniture and door frames will also have stickers to weave wallpaper. Then these places are often sprayed with paint. The paint is relatively smooth. If you apply glue directly on the paint surface, the adhesive force of the glue will be very insufficient. Jie organized several steps, as long as you follow the steps below, the painting surface will be perfect.
1. Use a blade or a short saw blade to roughen the paint surface to increase the bite force.
2. In order to increase the viscosity of the glue, the adhesive uses wood glue (white glue) mixed with wet glue to paste.
3. Gluing method recommends that the paint surface be glued, and the back of the paper should be glued when encountering heavier wallpaper.

3D stereo wall sticker product introduction
3D three-dimensional wall stickers are also called three-dimensional wall hanging and embossed wall stickers, which refers to the three-dimensionalization of people's favorite wall stickers.
3D three-dimensional wall stickers are a new type of decorative material. This product is widely used in aerospace industry products. It has 5261 light texture and high density characteristics. It uses new nano-composite ceramic materials, mica, and activated carbon as substrates, and uses the latest Surface active treatment technology and photo-initiated technology, combined with 4102 Chinaâ??s traditional ceramic technology and relief painting art, are made through high-temperature polymerization and advanced composite 1653 technology. The entire production process uses a full set of imported machinery and equipment through raw material ratio, molding, gas generation, It consists of 26 processes including polishing and coloring. The product has the characteristics of sound insulation, temperature insulation, noise reduction, clean air, and radiation protection. The 3D background wall can be assembled and changed at will according to personal preferences like a Rubik's Cube.
3D three-dimensional wall stickers have certain hardness and flexibility, insulation, flame-retardant, waterproof, anti-corrosion, non-deformation, anti-aging, etc., with a service life of more than 20 years, a variety of colors, smooth surface, and easy installation.
3D three-dimensional wall stickers are waterproof, moisture-proof, waterproof and wear-resistant three-dimensional wall stickers. The advantage of using it is that it is easy to stick by yourself.
The 3D stereo wall sticker is waterproof and moisture-proof. The 3D stereo feel is very good, and the adhesive is very sticky. There is no need to worry about falling off. It seems to be effective.
3D three-dimensional wall stickers are not only simple and convenient, but also free and versatile, and the decorative effect is also very first-class, which is perfectly suitable for the aesthetics of modern families and easily upgrades the quality of the home.
3D three-dimensional wall stickers are waterproof and moisture-proof. They are high-end and luxurious. The back comes with self-adhesive. After tearing and cleaning, you can paste it directly. It can be installed by men, women and children.
3D self-adhesive waterproof TV background wall brick pattern wallpaper, whether it is new house decoration or old house renovation, use this 3D waterproof and moisture-proof wall sticker, environmental protection and no smell.

Introduction of natural vermiculite wallpaper
Vermiculite is a natural, inorganic, non-toxic mineral that expands under high temperature. It is a relatively rare mineral and belongs to silicate. Its crystal structure is monoclinic, which looks like mica from its appearance. Vermiculite is produced when certain granite is hydrated. It is generally produced at the same time as asbestos. Because vermiculite has the ability of ion exchange, it has a great effect on soil nutrition. In 2000, the world's total output of vermiculite exceeded 500,000 tons. The main producing countries are China, South Africa, Australia, Zimbabwe and the United States.
Vermiculite wallpaper is a decorative material with fire-proof, heat-resistant and sound-proof effects. Vermiculite has the effects of fire prevention and heat insulation. Because of its natural characteristics, the living space created is a perfect combination of fashion and classicism, which fully reflects modern people's desire for green and environmental protection.
Vermiculite wallpaper, the product is mainly made of natural ore as raw material, based on non-woven paper base, and carefully crafted by professional designers after improvement. It completely eliminates harmful factors affecting health, so it is regarded as the most safe wallpaper . Among them, paper-based vermiculite is a new type of high-grade decorative material processed by scientific methods from natural ore. It is extremely elastic, visually impactful and soft to the touch. It is called "the best home decoration wallpaper"
Advantages of natural vermiculite wallpaper products: 1. Natural and environmentally friendly. 2. Fire and flame retardant. 3. Sound insulation and anti-noise. 4. Super texture.
Yantai Bimei New Material Co., Ltd., established in 2011, is located in the beautiful coastal city of Yantai, in the Yantai area of â??â??China (Shandong) Pilot Free Trade Zone. As one of the distribution centers of China's import and export trade, the superior geographical location accelerates the enterprise development of.
The company can provide customers with the design of product logos, the printing and production of product identification cards, the design and production of product manuals, and the production of product packaging materials, carefully creating products of their own for customers, and better maximizing customer value .

Introduction of Natural Yarn Wallpaper
1. Product name:
Yarn wallpaper, made of yarn materials. Yarn wallpaper is a kind of artificial spinning process, the surface is made of natural hemp and foaming process, composite non-woven paper bottom.
When it comes to yarn, we have to talk about the raw material of yarn, ramie. Ramie is a special crop in my country that uses textiles as its main purpose. It is a national treasure of China. my country's ramie output accounts for more than 90% of the world's ramie output, and it is called "Chinese grass" internationally. Ramie is suitable for planting in temperate and subtropical regions. The soil is deep, loose, high in organic matter, water-retaining, fertilizer-retaining, and drainage, and the pH value is 5.5-6.5. Ramie has not only textile value but also medicinal value. It can clear away heat and diuresis, relieve fetus and stop bleeding, and can also detoxify. It is suitable for cold and fever, measles and high fever, urinary tract infection, nephritis and edema, pregnant women's abdominal pain, fetal movement, threatened abortion, bruises, fractures, sores, swelling and pain, and bleeding disorders.
2. Product categories:
According to the production process, yarn wallpaper can be divided into the following categories:
Flat yarn wallpaper, wavy yarn wallpaper, belly yarn wallpaper, slub yarn wallpaper, pearl yarn wallpaper, striped yarn wallpaper, etc.
3. Product features and advantages:
(1) Natural production. The surface treatments are all natural and accidental, and the unevenness of the surface has the effect of sound absorption, which makes people feel stable and comfortable in this environment.
(2) Excellent air permeability. The yarn wallpaper contains countless pores in the fiber, which can adjust the humidity in the air and has high air permeability.
(3) Purify the air. Because of its special surface structure, yarn wallpaper can absorb harmful substances in the environment, such as: it can absorb some harmful substances produced during house decoration, such as benzene, formaldehyde, etc., and it can also absorb smoke and smoke in the air. Other peculiar smells have certain effects on human health.
(4) Convenient construction. The construction is simple, just apply glutinous rice glue to construct.
(5) Delicate texture. Yarn wallpaper, with rich texture, brings high-end luxury enjoyment, but without losing elegance.
(6) Durable. The yarn wallpaper is made of natural materials. With the long life of natural plants, the wallpaper is durable.
(7) Antibacterial and sterilization. Because its raw material is ramie, the yarn wallpaper has strong corrosion resistance, and the bacteria will be killed within 12 hours.
(8) Smooth feel. Made of natural materials, the yarn wallpaper has a smooth, delicate and skin-friendly touch.

1. Size: can be customized
2. Design: Can be customized
3. Material: Normal offer 0.16mm thickness PVC. Or 0.18mm thickness
4. Sealed production. Seam sealed, airtight ones. Helium pumping into it through the valve.
5. Advertising ideas, we work with customer. Logo printing can be digital/silk/hand painting.
6. MOQ: 1 piece
7. Price: negotiated
8. Suitable blower will be supplied with CE/UL certificate
9. Delivery by sea, by air, up to customer option
10. Payment method: T/T or western union
11. Payment Term: 30% amount prepaid before production, balance before delivery.
12. Production time: within 7 working days after receiving the deposit.
13. Each inflatable will be tested after finishing to ensure it work well.
14. Good quality goods, hospital customer service.



8m*4m
10m*5m
12m*6m.

1. Size: can be customized
2. Design: Can be customized
3. Material: Normal offer 0.16mm thickness PVC. Or 0.18mm thickness
4. Sealed production. Seam sealed, airtight ones. Helium pumping into it through the valve.
5. Advertising ideas, we work with customer. Logo printing can be digital/silk/hand painting.
6. MOQ: 1 piece
7. Price: negotiated
8. Suitable blower will be supplied with CE/UL certificate
9. Delivery by sea, by air, up to customer option
10. Payment method: T/T or western union
11. Payment Term: 30% amount prepaid before production, balance before delivery.
12. Production time: within 7 working days after receiving the deposit.
13. Each inflatable will be tested after finishing to ensure it work well.
14. Good quality goods, hospital customer service.



normal size is 6*6*4m
You can choose any size you want.

Specialized in cutting the PVC and aluminum profiles, used to make window and door frames.

After remove the clamping, fixed the saw blade to ideal position to be used as a table saw for woodworking.

Two clamping type for optional, block clamping type and new clamping type.

Vice revolving to the right and left from 0 to 45.

The machine is available without the machine base.

Carbide blade dia. 350-450mm is available as optional. The size can be designed asyou're your requirement.

Manual handle type or foot pedal type swivel base is available as optional to adjust on working direction from 0 to 90 degree.

Motor guard.

The aluminum profile cutting machine have two style: pedal style and manual handle brake style.

Model Number:
AC-350
Voltage:
220V/380V
Rated Power:
1.5/2.2kw
Dimension(L*W*H):
840x440x1600mm
Weight:
120kg
Warranty:
1 Year
After-sales Service Provided:
Overseas third-party support available

Thermosensitive crosslinker TMPTMA
INCI Name: Trimethylolpropane Trimethacrylate
English Name: TMPTMA; 1,1,1,1-TRIMETHYLOMETHYLOLOLOLPROPANE; TRIMETHAHACRYLATETE; 2,2-BIS (METHACRYLOXYMETHYL) BUTYL METHACRYLATE; 2,2-ylobis (methyloxymethyl) butyl methacrylate; 2-ETHYL-1,3-DIMETHACRYLOXYLOXYLOXYLOXY-2- (METHACRYLOMETHAYMETHACRYMETHYHYLOLOLOLOLOXHYL) PROPANE; 2-ETHYL-2-2-2-ETHYHYMETHYLOLOLOLOXMETYMETYYYMETMETHYLOLOLOLOXYMETYMETMETHOHOHODIDIDIDIHACRYLATE
CAS No. 3290-92-4
EINECS No. 221-950-4
Molecular formula: C18H26O6
Molecular weight: 338
Appearance and Properties: This product is a low viscosity, low volatile monomer liquid, providing rapid curing reaction, weather resistance, chemistry.
Specifications
Colourless transparent liquid
Ester content (> 95.5%)
Color (APHA) = 40
Viscosity CPS/25 C < 50
The acid value (mgKOH/g) is less than 0.5
Moisture < 0.1%
Inhibitors (MEHQppm) = 300
Scope of application:
Used in glass, metal, wood, optics, paper. Plastics, PVC floor coatings and offset printing ink, pressure sensitive adhesives, etc.
Stability and storage: It is not a flammable chemical, but should be stored in a well-ventilated warehouse to prevent direct sunlight and heat isolation, in order to prevent high temperature metamorphism from gathering.
Packaging: 25kg/plastic drum
Shelf life: 24 months

Chemical name :

Bis(1, 2, 2, 6, 6-pentamethyl-4-piperidinyl)-sebacate and 1-(methyl)-8-(1, 2, 2, 6, 6-pentamethyl-4-piperidinyl)-sebacate

Molecular formula : c30h56n2o4

Chemical structure :

Molecular weight : 509

Cas no : 41556-26-7 / 82919-37-7

Physical properties £º

Appearance : clear, slight yellow liquid

Content of dimer & mono : ¡ý 96%

Chroma:<30

Transmittance: 425nm¡ý95% 450nm¡ý97% 500nm¡ý98%

Toxicity £ºrat ld 50>2000mg/kg body weight taking orally

Use :

Uv-292 liquid hindered amine light stabilizer which is widely used to improve the weatherability of a variety of polymers. Uv-292 is highly effective used for a wide range of polymers and applications including polyurethanes, sealants, adhesives, pmma , elastomers, unsaturated polyesters, acrylics, vinyl polymers(pvb, pvc). It¡¯s especially applied in polyurethane , because it has good compatibility in solvent

Hindered amine light stabilizer, mainly used in paints and printing ink, especially developed for coating. It¡¯s efficiently provides significantly extended life time.


25kg/plastic drum