Find Verified Bar Counter Suppliers, Manufacturers and Wholesalers

Classification : Copper Bar
Copper bar is a kind of non-ferrous metal processing bar, has better processing performance, high conductivity. Mainly divided into brass rod (copper zinc alloy, less expensive), purple copper rod (higher copper content).

Classification : Incoloy Alloy
Incoloy Bar is a nickel-iron-chromium alloy with molybdenum and copper Incoloy Bar Sheet has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking and to pitting and crevice copper Incoloy Bar is Especially resistant to sulfuric and phosphoric acids.

Classification : Hastelloy Alloy
Hastelloy Bar is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media. Hastelloy Bar is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.

Classification : Hastelloy Alloy
Hastelloy Bar is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media. Hastelloy Bar is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.

Classification : Hastelloy Alloy
Hastelloy Bar is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media. Hastelloy Bar is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.

Product introduction

Flat steel refers to the steel 12-300mm wide, 3-60mm thick, rectangular in section and slightly blunt edge. Flat steel may be finished steel, or it may be used as blank for welding pipe and thin slab for rolling sheet. Main Uses: Flat steel as a material can be used for hoop iron, tools and mechanical parts, and used as structural parts of building frame and escalator.



Product

Flat bar

Standard

ASTM,BS,GB,JIS,etc

Grade

SS400, ST37-2, A36, S235JRG1, Q235, Q345 etc

Technique

Hot Rolled

Thickness

2.0mm-24mm

Size

20mm-200mm

Usage

Widely used in various building structure and engineering structure

Delivery Time

10~20days

Shipping

1)Shipping by containers
2)Shipping by bulk ship

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Packing and shipping

Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Application field

The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow

Classification : Inconel Alloy
Inconel Bar It has good high-temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding process performance, and satisfactory thermal strength and high plasticity below 700. Alloys can be strengthened by cold working, and can also be joined by resistance welding, fusion welding, or brazing.

Product Name : Angle bar

Surface : Pickling, Phosphating, Galvanizing

Edge : Plain Mill

Standard : ASTM DIN GB JIS EN AISI

* The angle steel is mainly used to make frame structures, such as high-voltage transmission towers, frames on both sides of the main beam of steel structure bridges, columns and booms of tower cranes on construction sites, columns and beams of workshops, etc., small places such as flower pot shaped shelves at the festival roadside, and shelves with air-conditioning and solar energy hung under windows. Angle steel is also widely used in building structures and engineering construction, such as house beams, power transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves.

Warehouse Storage

* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Packing and shipping

* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.

* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

Classification : Hastelloy Alloy
Hastelloy Bar is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media. Hastelloy Bar is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.

Classification : Copper Bar
ISO Copper bar is a kind of non-ferrous metal processing bar, has better processing performance, high conductivity. Mainly divided into brass rod (copper zinc alloy, less expensive), purple copper rod (higher copper content).

Classification : Copper Bar
SGS Copper bar is a kind of non-ferrous metal processing bar, has better processing performance, high conductivity. Mainly divided into brass rod (copper zinc alloy, less expensive), purple copper rod (higher copper content).

Classification : Monel Alloy
1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys.
2. According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.

Product Name : Angle bar

Surface : Pickling, Phosphating, Galvanizing

Edge : Plain Mill

Standard : ASTM DIN GB JIS EN AISI

* The angle steel is mainly used to make frame structures, such as high-voltage transmission towers, frames on both sides of the main beam of steel structure bridges, columns and booms of tower cranes on construction sites, columns and beams of workshops, etc., small places such as flower pot shaped shelves at the festival roadside, and shelves with air-conditioning and solar energy hung under windows. Angle steel is also widely used in building structures and engineering construction, such as house beams, power transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves

Warehouse Storage

* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Packing and shipping

* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.

* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period

Application field

* The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow.

Product introduction

* Flat steel refers to the steel 12-300mm wide, 3-60mm thick, rectangular in section and slightly blunt edge. Flat steel may be finished steel, or it may be used as blank for welding pipe and thin slab for rolling sheet. Main Uses: Flat steel as a material can be used for hoop iron, tools and mechanical parts, and used as structural parts of building frame and escalator.

Product : Flat bar

Standard : ASTM,BS,GB,JIS,etc

Grade : SS400, ST37-2, A36, S235JRG1, Q235, Q345 etc

Technique : Hot Rolled

Thickness : 2.0mm-24mm

Size : 20mm-200mm

Usage :
Widely used in various building structure and engineering structure

Delivery Time : 10~20days

Shipping :
1)Shipping by containers

2)Shipping by bulk ship

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Packing and shipping

* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.

* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

* Application field

* The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow.

Product introduction

* Flat steel refers to the steel 12-300mm wide, 3-60mm thick, rectangular in section and slightly blunt edge. Flat steel may be finished steel, or it may be used as blank for welding pipe and thin slab for rolling sheet. Main Uses: Flat steel as a material can be used for hoop iron, tools and mechanical parts, and used as structural parts of building frame and escalator.

Product : Flat bar

Standard : ASTM,BS,GB,JIS,etc

Grade : SS400, ST37-2, A36, S235JRG1, Q235, Q345 etc

Technique : Hot Rolled

Thickness : 2.0mm-24mm

Size : 20mm-200mm

Usage : Widely used in various building structure and engineering structure

Delivery Time : 10~20days

Shipping :
1)Shipping by containers
2)Shipping by bulk ship

Warehouse Storage

* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Packing and shipping

* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.

* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

Application field

* The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow

Product introduction

Flat steel refers to the steel 12-300mm wide, 3-60mm thick, rectangular in section and slightly blunt edge. Flat steel may be finished steel, or it may be used as blank for welding pipe and thin slab for rolling sheet. Main Uses: Flat steel as a material can be used for hoop iron, tools and mechanical parts, and used as structural parts of building frame and escalator.

Product : Flat bar

Standard : ASTM,BS,GB,JIS,etc

Grade : SS400, ST37-2, A36, S235JRG1, Q235, Q345 etc

Technique : Hot Rolled

Thickness : 2.0mm-24mm

Size : 20mm-200mm

Usage : Widely used in various building structure and engineering structure

Delivery Time : 10~20days

Shipping :
1)Shipping by containers
2)Shipping by bulk ship

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Packing and shipping

Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

Packing and shipping

Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

Product introduction

* Flat steel refers to the steel 12-300mm wide, 3-60mm thick, rectangular in section and slightly blunt edge. Flat steel may be finished steel, or it may be used as blank for welding pipe and thin slab for rolling sheet. Main Uses: Flat steel as a material can be used for hoop iron, tools and mechanical parts, and used as structural parts of building frame and escalator.

Product : Flat bar

Standard : ASTM,BS,GB,JIS,etc

Grade : SS400, ST37-2, A36, S235JRG1, Q235, Q345 etc

Technique : Hot Rolled

Thickness : 2.0mm-24mm

Size : 20mm-200mm

Usage : Widely used in various building structure and engineering structure

Delivery Time : 10~20days

Shipping : 1)Shipping by containers
2)Shipping by bulk ship

Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Packing and shipping : Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

Application field

* The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow

Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer)
Basalt fiber reinforcement (new material to replace reinforcement)

Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã??
Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters)
1. The cost is the same as that of ordinary reinforcement;
2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa,
3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust.
4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges.
5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement.
6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??

Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material 201 301304L 309S 316L310S321410 4302205 2507 904L INCOLOY Alloy HASTELLOY MONEL etc

Specifications

Round bar

Diameter : 0.1~500mm

Hexagonal bar

Size : 2mm~100mm

Flat bar

Thickness : 0.3~200mm

Width : 1~2500mm

Square bar

Size : 1mm*1mm~800mm*800mm

Length : 2m, 5.8m, 6m, or as required.

Surface : Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term : Ex-work, FOB, CFR, CIF, etc.

Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time : Standard size is in stock,prompt delivery or as order's quantity.

Package : Export standard package, bundled or be required.
The inner size of container is below:

* 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM

* 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM

* 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Use of stainless steel round bar:

1. It is used to manufacture self tapping screws such as bolts and nuts;

2. Used for manufacturing rivets;

3. Used for making spring steel wire and transmission mechanism parts;

4. It can be used for filling and strengthening in welding materials;

5. Main parts and components that can be used to manufacture molded
articles;

6. It can be made into welded pipe for deep processing of seamless steel
pipe or raw material of seamless steel pipe.

7. It is widely used in petroleum, chemical, food and other industries

8. It can also be used in shipbuilding, boiler and pressure vessel
manufacturing, etc.

9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells

10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints

11. Widely used in hardware products factories and machinery manufacturers

12. Widely used in various vehicle parts

13. Wide application and furniture decoration industry

14. Widely used in various mechanical equipment

15. Widely used in various pipelines

16. Widely used in various construction machinery

17. Applied to household appliances

18. Applied to electronic communication equipment

Material

* ASTM(1005,1006,1008,1010,1015,1020,1025,1030,1035,1040,1045,1050,1055,1060,1065,1070,1080,1084,1016,1022)

* DIN(Ck10,Ck15,Ck22,Ck25,Ck30,Ck35,Ck40,Ck45,Ck50, 30Mn4,40Mn4)

* BS(040A04,095M15,045M10,080A40,045M10,080M50)

* Thickness : 0.1mm-300mm or as required

* Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

* Technique : Hot rolled,cold rolled

Surface Treatment

* Clean, blasting and painting according to customer requirement

Thickness tolerance

+ 0.1mm

* Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

* Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts

Warehouse Storage

* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

* Ordinary low alloy steel is a kind of ordinary alloy steel containing a small amount of alloy elements (in most cases, the total amount of w does not exceed 3%). This kind of steel has high strength, good comprehensive properties, corrosion resistance, wear resistance, low temperature resistance, and good cutting and welding properties.
* Under the condition of saving a lot of rare alloy elements (such as nickel and chromium), usually 1 t ordinary low alloy steel can be used for 1.2-1.3 carbon steel, and its service life and scope of use are much longer than carbon steel. Ordinary low alloy steel can be smelted in open hearth furnace and converter with general smelting method, and the cost is close to that of carbon steel.

Material : API5L

Thickness : 0.1mm-300mm or as required

Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique : Hot rolled,cold rolled

Surface Treatment : Clean, blasting and painting according to customer requirement

Thickness tolerance : �±0.1mm

Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

Product introduction

* Flat steel refers to the steel 12-300mm wide, 3-60mm thick, rectangular in section and slightly blunt edge. Flat steel may be finished steel, or it may be used as blank for welding pipe and thin slab for rolling sheet. Main Uses: Flat steel as a material can be used for hoop iron, tools and mechanical parts, and used as structural parts of building frame and escalator.

Product : Flat bar

Standard : ASTM,BS,GB,JIS,etc

Grade : SS400, ST37-2, A36, S235JRG1, Q235, Q345 etc

Technique : Hot Rolled

Thickness : 2.0mm-24mm

Size : 20mm-200mm

Usage : Widely used in various building structure and engineering structure

Delivery Time : 10~20days

Shipping : 1)Shipping by containers
2)Shipping by bulk ship

Warehouse Storage

* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Packing and shipping

* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.

* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

Application field

* The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow.

* A53 is a steel grade produced according to American ASTM standards, which belongs to American standard. A53 Carbon steel round bar manufacturing requires parts with low stress and high toughness, such as car body, container, deep stamping vessels, pipes, gaskets, etc., which can be used for cold rolling, cold punching, cold heading, cold bending, hot rolling and other processes, as well as carburizing parts with low central strength, carbonitriding parts, etc.

* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.

* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.

* Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

Material : A53

Thickness : 0.1mm-300mm or as required

Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique : Hot rolled,cold rolled

Surface Treatment : Clean, blasting and painting according to customer requirement

Thickness tolerance : + 0.1mm

Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

* A214 is a steel grade produced according to American ASTM standards, which belongs to American standard.

* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.

* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

Material : A214

Thickness : 0.1mm-300mm or as required

Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique : Hot rolled,cold rolled

Surface Treatment : Clean, blasting and painting according to customer requirement

Thickness tolerance : + 0.1mm

Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

* A179 is a steel grade produced according to American ASTM standards, which belongs to American standard. A179 Carbon steel round bar is applicable to cold drawn high-quality low-carbon seamless steel pipe for heat exchanger and condenser.

* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.

* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

Material : A179

Thickness : 0.1mm-300mm or as required

Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique : Hot rolled,cold rolled

Surface Treatment : Clean, blasting and painting according to customer requirement

Thickness tolerance : + 0.1mm

Application :

* It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

Warehouse Storage

* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

* 201 stainless steel is mainly used for decorative tubes, industrial tubes and some shallow stretched products. Such as: oil waste gas combustion pipeline; Engine exhaust pipe; Boiler shell, heat exchanger and heating furnace components; Silencing parts for diesel engine; Boiler pressure vessel; Chemical transport vehicle; Expansion joint; Spiral welded pipe for gas furnace pipe and dryer, etc.

Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material : 201

Specifications

Round bar

Diameter : 0.1~500mm

Hexagonal bar : Size: 2mm~100mm

Flat bar
Thickness : 0.3~200mm

Width : 1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length : 2m, 5.8m, 6m, or as required.

Surface : Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term : Ex-work, FOB, CFR, CIF, etc.

Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time : Standard size is in stock,prompt delivery or as order's quantity.

Package : Export standard package, bundled or be required.
The inner size of container is below:

* 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM

* 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM

* 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;

2. Used for manufacturing rivets;

3. Used for making spring steel wire and transmission mechanism parts;

4. It can be used for filling and strengthening in welding materials;

5. Main parts and components that can be used to manufacture molded articles;

6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.

7. It is widely used in petroleum, chemical, food and other industries

8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.

9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells

10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints

11. Widely used in hardware products factories and machinery manufacturers

12. Widely used in various vehicle parts

13. Wide application and furniture decoration industry

14. Widely used in various mechanical equipment

15. Widely used in various pipelines

16. Widely used in various construction machinery

17. Applied to household appliances

18. Applied to electronic communication equipment

* 316L Stainless steel round bar is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches.

Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material : 316L

Specifications : Round bar

Diameter : 0.1~500mm

Hexagonal bar : Size: 2mm~100mm

Flat bar :

Thickness : 0.3~200mm

Width : 1~2500mm

Square bar : Size: 1mm*1mm~800mm*800mm

Length : 2m, 5.8m, 6m, or as required.

Surface : Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term : Ex-work, FOB, CFR, CIF, etc.

Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time : Standard size is in stock,prompt delivery or as order's quantity.

Package : Export standard package, bundled or be required.
The inner size of container is below:

* 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM

* 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM

* 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Use of stainless steel round bar:

1. It is used to manufacture self tapping screws such as bolts and nuts;

2. Used for manufacturing rivets;

3. Used for making spring steel wire and transmission mechanism parts;

4. It can be used for filling and strengthening in welding materials;

5. Main parts and components that can be used to manufacture molded
articles;

6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.

7. It is widely used in petroleum, chemical, food and other industries

8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.

9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells

10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints

11. Widely used in hardware products factories and machinery manufacturers

12. Widely used in various vehicle parts

13. Wide application and furniture decoration industry

14. Widely used in various mechanical equipment

15. Widely used in various pipelines

16. Widely used in various construction machinery

17. Applied to household appliances

18. Applied to electronic communication equipment

* 304L stainless steel is mainly used in automobile accessories, hardware tools, tableware, cabinets, medical appliances, office equipment, weaving, handicrafts, petroleum, electronics, chemicals, textile, food, machinery, construction, nuclear power, aerospace, military and other industries.

Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material : 304L

Specifications : Round bar

Diameter : 0.1~500mm

Hexagonal bar : Size: 2mm~100mm

Flat bar :

Thickness : 0.3~200mm

Width : 1~2500mm

Square bar : Size: 1mm*1mm~800mm*800mm

Length : 2m, 5.8m, 6m, or as required.

Surface : Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term : Ex-work, FOB, CFR, CIF, etc.

Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time : Standard size is in stock,prompt delivery or as order's quantity.

Package : Export standard package, bundled or be required.
The inner size of container is below:

20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM

40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM

40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Use of stainless steel round bar:

1. It is used to manufacture self tapping screws such as bolts and nuts;

2. Used for manufacturing rivets;

3. Used for making spring steel wire and transmission mechanism parts;

4. It can be used for filling and strengthening in welding materials;

5. Main parts and components that can be used to manufacture molded articles;

6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.

7. It is widely used in petroleum, chemical, food and other industries

8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.

9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells

10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints

11. Widely used in hardware products factories and machinery manufacturers

12. Widely used in various vehicle parts

13. Wide application and furniture decoration industry

14. Widely used in various mechanical equipment

15. Widely used in various pipelines

16. Widely used in various construction machinery

17. Applied to household appliances

18. Applied to electronic communication equipment

2507 stainless steel is used in oil and natural gas industry; Offshore stone skyshatter oil platform (heat exchanger pipe, water treatment and water supply system, fire protection system, water spraying system, water stabilization system; petrochemical equipment; desalination (desalination) equipment (and high-pressure pipe and seawater pipe in the equipment). Mechanical and structural components that require both high strength and high corrosion resistance: fuel (waste) gas purification equipment.



Standard

JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material

2507

Specifications

Round bar

Diameter:0.1~500mm

Hexagonal bar

Size: 2mm~100mm

Flat bar

Thickness

0.3~200mm

Width

1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length

2m, 5.8m, 6m, or as required.

Surface

Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term

Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time

Standard size is in stock,prompt delivery or as order's quantity.

Package

Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM



Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment

* Use of 2205 Stainless steel round bar: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment.

Standard

* JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material : 2205

Specifications

Round bar

Diameter:0.1~500mm

Hexagonal bar

Size: 2mm~100mm

Flat bar

Thickness : 0.3~200mm

Width : 1~2500mm

Square bar

Size : 1mm*1mm~800mm*800mm

Length : 2m, 5.8m, 6m, or as required.

Surface : Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term

Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,

Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time

* Standard size is in stock,prompt delivery or as order's quantity.

Package

Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;

2. Used for manufacturing rivets;

3. Used for making spring steel wire and transmission mechanism parts;

4. It can be used for filling and strengthening in welding materials;

5. Main parts and components that can be used to manufacture molded
articles;

6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.

7. It is widely used in petroleum, chemical, food and other industries

8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.

9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells

10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints

11. Widely used in hardware products factories and machinery manufacturers

12. Widely used in various vehicle parts

13. Wide application and furniture decoration industry

14. Widely used in various mechanical equipment

15. Widely used in various pipelines

16. Widely used in various construction machinery

17. Applied to household appliances

18. Applied to electronic communication equipment

310S Stainless steel round bar is widely used in kiln, high-temperature furnace, boiler, furnace liner high-temperature equipment, such as kiln car, boiler liner, high-temperature furnace, high-temperature furnace tube, combustion machine liner, etc. It can be used for high-temperature equipment. The product is resistant to high temperature and heat. 310S Stainless steel round bar has good creep strength and can work continuously under high temperature. The working temperature of 310S stainless steel is 1200 â??, and it can work continuously at 1100 â??. It is mainly used to manufacture high temperature exhaust pipe, high temperature furnace, high temperature furnace liner, crematory furnace and other steel grades requiring heat resistance, as well as high temperature and high temperature contact parts.



Standard

JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material

310S

Specifications

Round bar

Diameter:0.1~500mm

Hexagonal bar

Size: 2mm~100mm

Flat bar

Thickness

0.3~200mm

Width

1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length

2m, 5.8m, 6m, or as required.

Surface

Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term

Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time

Standard size is in stock,prompt delivery or as order's quantity.

Package

Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM



Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry

430 stainless steel is used for building decoration, fuel burner parts, household appliances and household appliances. 430F is a steel with free cutting property added to 430 steel, mainly used for automatic lathes, bolts and nuts. 430LX adds Ti or Nb to 430 steel to reduce the content of C, which improves the processability and welding performance. It is mainly used in hot water tanks, hot water supply systems, sanitary appliances, household durable appliances, bicycle flywheels, etc.



Standard

JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material

430

Specifications

Round bar

Diameter:0.1~500mm

Hexagonal bar

Size: 2mm~100mm

Flat bar

Thickness

0.3~200mm

Width

1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length

2m, 5.8m, 6m, or as required.

Surface

Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term

Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time

Standard size is in stock,prompt delivery or as order's quantity.

Package

Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM



Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment

About uses of Monel400 alloy: various heat exchange equipment, boiler feed water heaters, pipelines, containers, pumps, valves, shafts, etc. in petroleum and chemical processing, seawater desalination equipment, salt production equipment, propeller shafts, gasoline and water tanks, etc.



Standard

JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material

Monel400

Specifications

Round bar

Diameter:0.1~500mm

Hexagonal bar

Size: 2mm~100mm

Flat bar

Thickness

0.3~200mm

Width

1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length

2m, 5.8m, 6m, or as required.

Surface

Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term

Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time

Standard size is in stock,prompt delivery or as order's quantity.

Package

Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM



Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment

and the project, in order to ensure the quality of the project.

904L tainless steel round bar (super austenitic stainless steel) is a high alloyed austenitic stainless steel with very low carbon content. It has good corrosion resistance in dilute sulfuric acid and is specially designed for environments with severe corrosion conditions. It has high chromium content and sufficient nickel content. The addition of copper makes it have strong acid resistance, especially high resistance to chloride interstitial corrosion and stress corrosion cracking. It is not easy to appear corrosion spots and cracks. Its pitting resistance is slightly better than that of other steels. It has good processability and weldability, and can be used for pressure vessels.



Standard

JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material

904L

Specifications

Round bar

Diameter:0.1~500mm

Hexagonal bar

Size: 2mm~100mm

Flat bar

Thickness

0.3~200mm

Width

1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length

2m, 5.8m, 6m, or as required.

Surface

Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term

Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time

Standard size is in stock,prompt delivery or as order's quantity.

Package

Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM



Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment

192 is the steel of carbon structural steel, which is a kind of alloy steel and carbon steel. The carbon content is about 0.05%~0.70%, and some can reach up to 0.90%. It can be divided into ordinary carbon structural steel and high-quality carbon structural steel.

Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.



Material

A192
Thickness

0.1mm-300mm or as required

Standard

AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique

Hot rolled,cold rolled

Surface Treatment

Clean, blasting and painting according to customer requirement

Thickness tolerance

�±0.1mm

Application

It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time

Within 7-15 workdays after receiving deposit or L/C

Export packing

Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity

250,000 tons/year



Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for
drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point.

Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.



Material

ST37
Thickness

0.1mm-300mm or as required

Standard

AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique

Hot rolled,cold rolled

Surface Treatment

Clean, blasting and painting according to customer requirement

Thickness tolerance

�±0.1mm

Application

It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time

Within 7-15 workdays after receiving deposit or L/C

Export packing

Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity

250,000 tons/year



Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for
drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

Product Name : Stainless steel angle bar

Surface : Pickling, Phosphating, Galvanizing

Edge : Plain Mill

Standard : ASTM DIN GB JIS EN AISI

* The angle steel is mainly used to make frame structures, such as high-voltage transmission towers, frames on both sides of the main beam of steel structure bridges, columns and booms of tower cranes on construction sites, columns and beams of workshops, etc., small places such as flower pot shaped shelves at the festival roadside, and shelves with air-conditioning and solar energy hung under windows. Angle steel is also widely used in building structures and engineering construction, such as house beams, power transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves

Warehouse Storage

* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Packing and shipping

* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.

* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

* A106 GrB strength grade 415MPa. ASTM A106Gr. B carbon steel round bar is a kind of low carbon steel widely used in petroleum, chemical and boiler industries. The material has good mechanical properties. Carbon steel round bar for high-temperature operation ASTM A106 GR. B, steel grade: SA106B, Specification: 1/4 â?³ - 28 â?³, 13.7-711.2mm Steel grade: GRAD B, Standard: ASTM A106 - American Society for Testing and Materials.

* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

Material : A106Gr. B

Thickness : 0.1mm-300mm or as required

Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique : Hot rolled,cold rolled

Surface Treatment

* Clean, blasting and painting according to customer requirement

Thickness tolerance : + 0.1mm

Application :

* It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing

* Waterproof paper, and steel strip packed.

* Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts

Incoloy 825 is a nickel iron chromium alloy, which is widely used in petroleum, natural gas and chemical processing industries. It has good corrosion resistance and can operate at higher temperatures than most stainless steels.



Standard

JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material

Incoloy 825

Specifications

Round bar

Diameter:0.1~500mm

Hexagonal bar

Size: 2mm~100mm

Flat bar

Thickness

0.3~200mm

Width

1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length

2m, 5.8m, 6m, or as required.

Surface

Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term

Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time

Standard size is in stock,prompt delivery or as order's quantity.

Package

Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM



Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment

* Hastelloy C-276 alloy is one of the few materials that can be used in hot concentrated sulfuric acid solution It is mainly resistant to wet chlorine, various oxidizing chlorides, chloride solutions, sulfuric acid and oxidizing salts, and has good corrosion resistance at low and medium temperatures. Therefore, in the past 30 years, it has been widely used in harsh corrosive environments, such as chemical industry, petrochemical industry, flue gas desulfurization, pulp and paper making, environmental protection and other industrial fields.

Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material : Hastelloy C-276

Specifications

Round bar

Diameter : 0.1~500mm

Hexagonal bar

Size : 2mm~100mm

Flat bar

Thickness : 0.3~200mm

Width : 1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length : 2m, 5.8m, 6m, or as required.

Surface : Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term : Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time : Standard size is in stock,prompt delivery or as order's quantity.

Package : Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;

2. Used for manufacturing rivets;

3. Used for making spring steel wire and transmission mechanism parts;

4. It can be used for filling and strengthening in welding materials;

5. Main parts and components that can be used to manufacture molded articles;

6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.

7. It is widely used in petroleum, chemical, food and other industries

8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.

9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells

10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints

11. Widely used in hardware products factories and machinery manufacturers

Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer)
Basalt fiber reinforcement (new material to replace reinforcement)

Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã??
Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters)
1. The cost is the same as that of ordinary reinforcement;
2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa,
3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust.
4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges.
5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement.
6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??

Universal Frequency Counter

Features

* Minimum measuring resolution 11 digits/s

* Time resolution 25ps (typical)

* Maximum frequencyâ??s measurement can reach to 40GHz

(options)

* Measures Frequency, Period, Duty Cycle, Frequency

Ratio, Totalize,

* Phase Difference, Pulse Width, Time Interval and DCV.

* Utility statistics functions of multi-average,

maximum,minimum,PPM,

* Standard deviation and Allan Variance for frequency

measurement

* Stores 15 group status

* High-stability crystal oscillator is optional

Universal frequency counter is an essential tool for accurately measuring the frequency of various signals, making it ideal for a wide range of applications. Frequency counters, including specialized models like the RF frequency counter, are designed to measure the frequency of both low and high-frequency signals. In the electronic frequency counter market, there are many options available, with frequency counters ranging from basic models to advanced universal counters with enhanced capabilities. The demand for frequency counter market products has grown as industries rely more on precise measurements for testing and troubleshooting. Whether you're working with a simple freq counter or a more complex universal frequency counter, these tools are vital for maintaining the integrity of electronic systems and ensuring accurate frequency count.

component
Epoxy resin and hardener

mix viscosity
TC110: 2000-3000 megapascals per second (25 �º C) FL210: 1000-1500 megapascals per second (25 �º C)
HL310ï¼?300-500Mpa.sï¼?25�ºCï¼?

Curing Time
TC110/HL310:FL210: 5-7 hours (25 �° C) 12-48 hours (25 �° C)
2-4 hours (60 â??)

application
Top coating, floor, river table, furniture, tabletop, bar top, counter top, roller, coaster and tray, photo frame, geodetic instrument
Paint, lamp pottery, art painting, artwork, arts and crafts, jewelry, guitar surfaces, handicrafts, ashtrays, carvings, earrings,
Bracelets, hair clips, glass, figurines, acrylic casting art, ceilings, home decor, garages, concrete flooring, epoxy resin flooring


characteristic
Crystal clear, sturdy formula, food safe, will not turn yellow, non-toxic, free of bisphenol A, odorless, non-volatile organic compounds, no bubbles, UV resistant,
Scratch resistant, food contact resistant, waterproof, wear-resistant, electrical protection, anti slip, thermal insulation, fireproof, flame retardant

All kinds of granite kitchen counter top,

Product Name:Counter Type Matte Lipstick
Origin:China
Size: 2.3*2.7*7.7 cm
Color: red
Net Weight:3g
Ingredient:Chemical
Temperature change:Color changing lipstick
Size Type:regular size
Usage:Lady's Beauty Cosmetics Makeup
Advantage:
1. Moisturizer
2. Natural
3. Premium
packagingSample:CostSample cost will be returned in normal order
MOQ:3000PCS
Certification: CPSR,GMP,GMPC,MSDS,ISO9001,ISO22716
OEM/ODM: Acceptable Customized Label
Sample Time:7-14days
Delivery Time:About 45 days after received deposit
Service:
Support Custom Label;
Custom colors
Production time: based on quantity

IC REG LIN 3.3V 250MA SOT-223-3
Output Configuration: Positive
Output Type: Fixed
Number of Regulators:1
Voltage - Input (Max):16V
Voltage - Output (Min/Fixed):3.3V
Current - Output:250mA
Current - Quiescent (Iq):5 �µA
PSRR:44dB (100Hz)
Operating Temperature: -40�°C ~ 125�°C
Package:SOT-223-3

Simple Combination Mobile Bar

Specification :

Product Name : Bar Caddy
Material : ABS plastic
Color : Black
Logo : Customized Logo
Size : 5-3/4" x 9-1/2" x 4-1/8"
Compartment: 6

Features:

Black ABS plastic with compartment for napkins, stir sticks and other decorations. We can put your logo on the product if it is necessary.

Aluminum bar

Features:
1) Alloy: 1100, 1060, 1050, 2014, 2024, 3003, 3103, 4032, 5052, 5086,
5049, 6063, 6061, 6005, 6082, 7005, 7075 (if order quantity is over 10MT,
any alloy is welcome)
2) Temper: O, H112, T4, T5, T6
3) Application: auto spare parts, transducer of weight, telecommunication and
other industry machines

Solid Birch Wood or as customer required.