Find Verified Processed Food Suppliers, Manufacturers and Wholesalers

Product Name: Isopropyl myristate
Synonyms: Isopropyl Myristate, 96% 25GR; IPM 100; IPM-EX; IPM-R; Radia 7730 (IPM); Isopropyl myristate Vetec(TM) reagent grade, 98%; MYRISTIC ACID ISOPROPYL ESTER MINIMU; ISO-PROPYL N-TETRADECANOATE
CAS: 110-27-0
MF: C17H34O2
MW: 270.45
EINECS: 203-751-4
Melting point ~3 �°C (lit.)
Boiling point 193 �°C/20 mmHg (lit.)
density 0.85 g/mL at 25 �°C (lit.)
vapor pressure <1 hPa (20 �°C)
FEMA 3556 | ISOPROPYL MYRISTATE
refractive index n20/D 1.434(lit.)
Fp >230 �°F
storage temp. 2-8�°C
solubility <0.05mg/l
form Liquid
Specific Gravity 0.855 (20/4�ºC)
color Clear
Odor odorless


Application

Isopropyl myristate (IPM) is a fatty acid ester which is used as solvent in water-in-oil emulsion, oils and fatty based ointments. The use of IPM is recommended in the Sterility Test chapter of the European, Japanese and United States Pharmacopoeia (EP, 2.6.13, JP, 4.06 and USP, 71) as diluent for oils and oily solutions, as well as for ointments and creams. Indeed, its solvent properties improve the filterability of these samples.
Isopropyl myristate is known as a penetration enhancer for topical preparations. It is a water clear, low viscous oily liquid with a very good spreading capacity on the skin. Isopropyl Myristate is mainly used in cosmetics as an oil component for emulsions, bath oils and as a solvent for active substances.

4-Chloro-3,5-dimethyl is a white crystalline powder. Melting point 115-116 C, boiling point 246 C. At 20 C, 1g can be dissolved in 3L water, 1 part of 95% alcohol, ether, benzene, terpenes, non-volatile oils. It has a slight smell and can volatilize with water vapor. Stable in hot water.

1. Used as a paper sizing agent in the papermaking industry to enhance the water resistance and impermeability of paper;
2. After being dissolved in water, it can cause small particles and natural colloidal particles in the water to condense into
large flocs, which can be removed from the water. Therefore, it is used as a coagulant for water supply and wastewater;
3. Used as a turbid water purifier, as well as a precipitator, color fixative, filler, etc. Used as a raw material (astringent)
for anti sweat cosmetics in cosmetics;
4. In the fire protection industry, foam extinguishing agent is composed of baking soda and foaming agent;
5. Analytical reagent, mordant, tanning agent, oil decolorizing agent, wood preservative;
6. Stabilizers for albumin pasteurization (including liquid or frozen whole eggs, protein or egg yolk);
7. It can be used as raw material to produce artificial gemstones, high-grade ammonium alum and other aluminate;
8. In the fuel industry, it serves as a precipitator in the production of chrome yellow and lake dyes, while also serving as afixing and filling agent.

About uses of Monel400 alloy: various heat exchange equipment, boiler feed water heaters, pipelines, containers, pumps, valves, shafts, etc. in petroleum and chemical processing, seawater desalination equipment, salt production equipment, propeller shafts, gasoline and water tanks, etc.


Name

MONEL400 Stainless Steel Coil

Standard

JIS, AISI, ASTM, GB, DIN, EN, BS

Material

MONEL400

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-12mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.



Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Name

Stainless Steel Coil

Standard

JIS, AISI, ASTM, GB, DIN, EN, BS

Material

201, 301 304L, 309S, 316L 310S 321 410, 430 2205 , 2507 , 904L , INCOLOY Alloy , HASTELLOY MONEL etc.

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirementg,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-12mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.



Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

430 stainless steel coil is used for building decoration, fuel burner parts, household appliances and household appliances. 430F is a steel with free cutting property added to 430 steel, mainly used for automatic lathes, bolts and nuts. 430LX adds Ti or Nb to 430 steel to reduce the content of C, which improves the processability and welding performance. It is mainly used in hot water tanks, hot water supply systems, sanitary appliances, household durable appliances, bicycle flywheels, etc.

Name

430 Stainless Steel Coil

Standard

JIS, AiSi, ASTM, GB, DIN, EN

Material

430

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-4mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T



Stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.

304L stainless steel coil is mainly used in automobile accessories, hardware tools, tableware, cabinets, medical appliances, office equipment, weaving, handicrafts, petroleum, electronics, chemicals, textile, food, machinery, construction, nuclear power, aerospace, military and other industries.


Name

304L Stainless Steel Coil

Standard

JIS, AiSi, ASTM, GB, DIN, EN

Material

304L

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-4mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.



Stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.

Packing and shipping

Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

310S stainless steel coil is widely used in kiln, high-temperature furnace, boiler, furnace liner high-temperature equipment, such as kiln car, boiler liner, high-temperature furnace, high-temperature furnace tube, combustion machine liner, etc. It can be used for high-temperature equipment. The product is resistant to high temperature and heat. 310s stainless steel plate has good creep strength and can work continuously under high temperature. The working temperature of 310S stainless steel is 1200, and it can work continuously at 1100. It is mainly used to manufacture high temperature exhaust pipe, high temperature furnace, high temperature furnace liner, crematory furnace and other steel grades requiring heat resistance, as well as high temperature and high temperature contact parts.



Name

310S Stainless Steel Coil

Standard

JIS, AiSi, ASTM, GB, DIN, EN

Material

310S

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-4mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.


Stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery

Use of 2205 stainless steel coil: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment.


Name

2205 Stainless Steel Coil

Standard

JIS, AISI, ASTM, GB, DIN, EN, BS

Material

2205

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-12mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.





Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.

2507 stainless steel coil is used in oil and natural gas industry; Offshore stone skyshatter oil platform (heat exchanger pipe, water treatment and water supply system, fire protection system, water spraying system, water stabilization system; petrochemical equipment; desalination (desalination) equipment (and high-pressure pipe and seawater pipe in the equipment). Mechanical and structural components that require both high strength and high corrosion resistance: fuel (waste) gas purification equipment.



Name

2507 Stainless Steel Coil

Standard

JIS, AISI, ASTM, GB, DIN, EN, BS

Material

2507

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirementg,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-12mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.



Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

201 stainless steel coil is mainly used for decorative tubes, industrial tubes and some shallow stretched products.



Name

201 Stainless Steel Coil

Standard

JIS, AiSi, ASTM, GB, DIN, EN

Material

201

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirementg,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-4mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.



Stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Hastelloy C-276 alloy is one of the few materials that can be used in hot concentrated sulfuric acid solution It is mainly resistant to wet chlorine, various oxidizing chlorides, chloride solutions, sulfuric acid and oxidizing salts, and has good corrosion resistance at low and medium temperatures. Therefore, in the past 30 years, it has been widely used in harsh corrosive environments, such as chemical industry, petrochemical industry, flue gas desulfurization, pulp and paper making, environmental protection and other industrial fields.



Name

Hastelloy C-276 Stainless Steel Coil

Standard

JIS, AISI, ASTM, GB, DIN, EN, BS

Material

Hastelloy C-276

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-12mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.



Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery

904L stainless steel coil (super austenitic stainless steel) is a high alloyed austenitic stainless steel with very low carbon content. It has good corrosion resistance in dilute sulfuric acid and is specially designed for environments with severe corrosion conditions. It has high chromium content and sufficient nickel content. The addition of copper makes it have strong acid resistance, especially high resistance to chloride interstitial corrosion and stress corrosion cracking. It is not easy to appear corrosion spots and cracks. Its pitting resistance is slightly better than that of other steels. It has good processability and weldability, and can be used for pressure vessels.


Name

904L Stainless Steel Coil

Standard

JIS, AiSi, ASTM, GB, DIN, EN

Material

904L

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirementg,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-4mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.



Stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Packing and shipping

Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

316L stainless steel coil is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches.

Name

316L Stainless Steel Coil

Standard

JIS, AiSi, ASTM, GB, DIN, EN

Material

316L

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-4mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.



Stainless steel strip is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery

Eucalyptus oil is one of the most commonly used essential oils. With the growing popularity of sweets and chewing gum, one of the main uses of eucalyptus oil is as a food additive. The new influence and clean appeal of synthetic fragrances has had a great impact on the cosmetics industry (such as toothpaste and oral cleaning products) and other household cleaning products, as well as the fragrance of perfumes. Eucalyptus oil is also used in the pharmaceutical industry as an antibacterial agent, especially in the treatment of respiratory infections and other similar diseases.

High-quality tin-plated steel coils with excellent corrosion resistance, solderability, and surface smoothness. Adopt electrolytic or hot-dip tinning process, widely used in food cans, electronic components, hardware tools, and building decorations. Complies with ASTM A623, GB/T 2520, and FDA standards, exported to 40+ countries (Europe, North America, Southeast Asia, South America) with 15+ years of tin-plated product export experience.

Cleaned and selected bulk material, suitable for roasting (snack processing) and sunflower oil extraction.
Stable quality with uniform size and natural color.
TKW 180g-220g(or over 200g for the finest)

Uniformity rate: over 90% of kernels fall within the same size grade, ensuring a consistent and premium look
, plumpness rate> 95%
broken rate: 1.5 %
moisture content 8-10%
Color Contrast: Distinct Black and white stripes with a bright, glossy appearance

JHG is professionally offering all various of high quality laminated glass:

1) PVB laminated glass

Colour includes clear/milk/bronze/grey/blue/green/black

PVB film thickness is 0.38/0.76/1.14mm or thicker

Both standard size and customized sizes available

2)Sentryglass Plus(SGP)laminated glass

SGP bring more safe,more transparent for construction ,the film includes 0.89/1.52/2.28mm and thicker

mainly used for glass floor,glass step,glass fin,curtain wall

Max size is 18000mm length

3)EVA laminated glass

It can be laminated with large range of inserts including PET film,polycarbonates,wood veneer,metal,paper ,stones,screeen mesh ,and so on ,it will bring mulrirusinous choice for inner decoration.

Calcium milk glass polypropylene premium stainless steel
Item number TRFK9907B-4S 9907B-3S 907B-2S
capacity 500ML 700ML 1000ML
dimension 9*9*11CM 9*9*15CM 9*9*19CM
packing General bag/Color box
Packing rate 48 36 24

Laminated glass is one kind of safety glass, and when glass breakage, glass fragments adhering to the interlayer, it can be against forced entry, and avoid fragment damage.PVB laminated glass , clour includes clear /milk /bronze/grey/blue/green/black ,PVB film include 0.38,,mm/0.76mm/1.14mm and so on. booth annealed and tempered laminated glass available , for standard sizes and cut sizes.