Find Verified Plastic Footwear Suppliers, Manufacturers and Wholesalers

Cavities:single or multi
Mold runner:cold or hot runner
Gate type:side gate, sub gate, pin point gate, edge gate etc
Mould life:200~1 m available
Certification:iso 9001:2008

HDPE Temporary Ground Mat is durable, lightweight, and extremely strong. HDPE Temporary Road Mats are engineered to provide floor protection and access over soft surfaces and will provide a firm support base and traction for numerous activities.

HDPE Temporary Ground Mat are used in a broad variety of applications, such as construction sites, golf courses,utilities, landscaping, tree care, cemeteries, drilling etc. And they are great to save heavy vehicles from getting struck in mud.We are the professiona HDPE Temporary Ground Mat Supplier.

1. PVC crust foamed plate has such characteristics as sound separation, sound absorption, heat separation, temperature-keeping, etc.
2. The material is incombustible, it is safe for use.
3. All series of products have property of moisture proof, mildew proof, water resistance, its vibration resistant effect is good.
4. All series of products have property of weathering proof, its luster may remain forever, it is not easy to be ageing.
5. This product is light, storage &transport, construction are rather covenient.
6. This product can be worked with normal tools for wooden material.
7. Drilling, sawing, nail, planning, bonding can be conducted like wooden material.
8. It is suitable for thermal shaping, thermal bending and fold procession.
9. It can be welded, it can also be bonded with other PVC material.
10. The surface of the product is smooth, it can be printed.


40" container(not including the auxilities) or 40"and 20"container(including the auxilities).

The pad printing silicon rubber usages:
The silicon rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys, trade makers .Silicon pad printing is a carrier which transfer printing the patterns on the steel plate onto the toys products surface.

Pad printing silicon rubber features:
Pad printing silicon rubber with high print times and abrasion resistance, without any inpurities, with good printing effects, permanent and durable, we can provide all kinds of colors are available and our catalyst is free charged.

Pad printing silicon rubber operation instructions:
Pad printing silicon rubber is two-component silicone, part a is the liquid silicon rubber, part b is the catalyst. The usual mxing ratio for silicone rubber and catalyst is two to three percent, eg. We take one hundred grams of liquid silicon rubber, then we add two to three grams catalyst, mix then evenly and pour it to your mold. Then after two to four hours, you will obtain a printing pad.
Frequently asked question of pad printing silicon rubber:

The reasons why the silicon pad has a short service life are listed as follows:
(1)the problem caused by inappropriate filtration of silicone rubber, and impurities in the packaging process due to the uncleanness of barrels and bags.
(2)the short service life of the silicone pad has a close relationship with the adding amount of silicone oil. The more the silicone oil added, the softer the silicone pad will be. The silicone oil will destroy the molecule of the silicone rubber, thereby bringing about the non-durable and easy ageing of the silicone pad.

5.No perforation & breakage,
6.No smell & toxicity.
7.Can be easily thermoformed, glued, printed and folded.

Application :
Thermoform, vacuum form blistering etc
Being fit for thermoforming, vacuum form, blister package, folding box,
Printing, gluing in pharmaceutical,
Food and industry field, such as food tray, fruit tray, biscuit& chocolate insert pack,
Blister package for capsule, tablets, lozenge, toys, hardware, electronic products, stationery, cosmetic etc.
Seed tray, advertisement board, clothes outer packing box, shirt color support, bidding documents cover,
Bank cards, shoe model, calendar, colorful plastic pictures, water spraying sheet etc.

Flocked pet plastic sheet in roll form
It is widely used in decoration inner boxes, glasses boxes, jewelry boxes,
Watch boxes and book boxes and packaging inner boxes, etc.


Inner pe film+craft paper+outer plastic film +tray /pallet

Item Name OEM Custom CNC Machining White Delrin Spacers Washer Disc Plastic Machinery Parts
Available materials Aluminum: 5052, 5083, 6061, 6082, 7075
Steel/Carbon steel/Alloy steel/Harden Steel/Die steel:Q235, #45, Q345, Y12, Y30, 40Cr
Stainless Steel: SUS303, SUS304, SUS303Cu, SUS316, SUS316L, SUS416, SUS431
Brass: C230/C260/C360
Pure Cooper
Plastic: POM, POM-C, Nylon, Acrylic, ABS, PEEK, Plexiglas, PP, PE
Titanium: TA1, TA2, TA3, TA4, TC4
CNC turning work range �?4mm-�?500mm*1000mm
CNC milling work range 510mm*1520mm*800mm
tolerance �±0.01mm and hole tolerance is �±0.005mm.
Finished Anodized, Powder coating, Electroplating, Nitriding, Sandblasting, Heat treatment, Blueing, Grinding, Polishing, As machined,
DRW format PDF, CAD for 2D; x_t,.igs,.stp, .step for 3D
Processing Equipment CNC Machining center, CNC Lathe, Turning machine, Milling machine, Drilling machine, Internal and external grinding machine, Cylindrical grinding machine, Tapping drilling machine, Wire cutting machine, polishing machine, etc.
Surface Roughness Ra 0.2-Ra 3.2
MOQ Both small orders and large orders are welcomed
Delivery Time Leadtime of samples: 3-5 days mass production: 10-25days
Quality control "100% Inspection before shipment
IQC â?? IPQC â?? OQC/FQC â?? Quality Complain Feedback â?? Audit & Training."
Other services CNC engraving, Laser engraving, silk printing, Knurling
Application Mechanical industry, Digital Cutting, pneumatic, hydraulic, industrial parts, Farm equipment, Electric Skateboard, Camera, Audio, Instrument, Automation Machinery etc

high quality plastic spiral hose guard is specifically designed to perform in hazardous environments where external factors such as abrasion would otherwise jeopardize the hose life expectancy. Guaranteed maximum resistance to high temperatures, mechanical stress, abrasion and wear.

valve seat cutter 1inch dn20 50 ppr plastic handles brass ball valve
Material:PP/ABS
5,Size:1/2"
6,Working Temperature:0-75
7,Working Pressure Range:1.2MPA
8,Water outlet:Spout
9,Usage: basin, kitchen, shower room, bath room, inside, outside, garden.
10,Pressure test:Air test,water test
11,Installation type:Wall Mounted
12,Packing:300pcs/Carton
13,Packing detail:carton/container/usual box/as per your requirement
14,Delivery period:7-30 days after receiving deposit.






PP/ABS
Size
1/2''
Working Temperature
0-75
Working Pressure Range
1.2MPA
Water outlet
Spout
Usage
basin,shower room,bath room,inside,outside,garden
Pressure test
Air test,water test
Installation type
Wall Mounted
Packing
300pcs/Carton
Packing detail
carton/container/usual box/as per your requirement
Delivery period
7-30 days after receiving deposit.
Payment term
T/T,L/C,D/P,D/A
Place of origin
shandong,China(Mainland)

1.Size of 420 steel
Diameter(mm):20~600 length (mm):1000~6000
Plate
Thickness(mm):max:800 width (mm):max:2200 length (mm):max:6000
The specification can be customized.
2.Chemical compositions
C:0.35-0.43 si:0.20-0.80 mn:0.55-0.95 p:max 0.028 s:max 0.020 cr:13.00-14.00
3.Similar grade
Gb:4cr13 aisi:420 din:1.2083 jis:sus420j2
4.Featuresâ ofâ 420 steelâ 
 (1)â excellent corrosion resistance.
 (2)excellent abrasion resistance and elasticity.
 (3)â excellent high-temperature abrasion resistance.
 (4)lower impurity.
5.Application
 (1)chemical resistance plastic mold.
 (2)corrosion of thermoplastic plastics.
 (3)â small moulds.
 (4)transparent, mirror products and moulds.
6.Min.Order quantity:5 ton/tons our moq is flexible
Supply capacity:5000 ton/tons per month
Or based on the clients' demand
Port:shenzhen
Payment terms:l/c, d/p, t/t
7.Packaging & delivery
In seaworthy packingï¼? 20ft:gw 28t; (5.80m*2.13m*2.18m); 40ft:gw28t; (11.8m*2.13m*2.18m) or based on your order
Shipped in 15 days after payment
8.Special use:mold steel
9.Surface treatment:black/polished/machined
Technology:hot rolled/forged/cold drawn
Heat treatment:annealing/q+t

It is suitable to be used in the environment of over -5.
It can greatly improve the early strength of concrete and has good adaptability to the cement.
It is of multifunction such as water-reducing, plastic and improving the workability of concrete.
There is no harmful materials contained in this product that decrease the strength of later stage and destroy the inner construction of the concrete.
It is of free ammonia and chlorine and no corrosion to the steel.


25Kg,Bags

PVC Sight Glass Flange End ANSI CL150 is made by glass body with PVC flange, the main function of sight glass is to observe the medium inside the pipe. PVC sight glass size from 1/2" to 300" with flange connection fit standard ANSI CL150, JIS 10K and DIN PN10. PVC sight glass is suitable for water, waste water, acids, ect. plastic sight glass can be used without pressure only.

Size: DN15~DN300 (1/2 inch 12 inch)
Flange connection: DIN PN10; ANSI CL150; JIS 10K
Flange Material: PVC-U; PVC-C; PVDF; PP-GF; PP-H
Glass Material: Borosilicate Glass
Seal material: EPDM; FPM
Design pressure: 0.15Mpa (PN1.5 bar)

Feature of Sight Glass
The parts that will touch medium is made from corrosive resist material.
Steel bolt support the glass body, make the sight glass stronger.
Rubber seals to protect medium leak to atmosphere.
Suitable for horizontal and vertical installation.

16mm plastic heat resistant pvc pipes
1.High density pvc
2.Durable
3.Good impact strength
4.Smooth surface

16mm plastic heat resistant pvc pipes

1. Product description

Diamete16mm-50mm
Thickness0.8mm-2.0mm
MateriaPvc
ColoWhite/blue white
PackingStandard exported packaging or according to customer's requirement
PortFob shenzhen
Moq3000 meters
Delivery timeFor 20' feet container: 10-15days after the deposit was received
UsageElectric wires installation

2.Product features
Non-conductive: good insulation, assuring a safe system
Smooth surface: small friction coefficient to ensure the cables go through smoothly
Fire resistance: self-extinguishing, do not support combustion
Corrosion resistance: resistant to acids, bases and salts, assuring a lower maintenance cost and a longer performance life
Impact strength: resistant to compression and impact, suitable to be buried in concrete
Easy installation: solvent cement and threading joining
Flexible: can be bend for diamerter 16/20/25/32mm

Agricultural Single Span Plastic Film Greenhouse Agricultural Single Span Greenhouse
Single span plastic tunnel greenhouse is composed by hot galvanized pipe with three layers film for the covering material. The frame structure is simple, cheap cost and easy to install.
PRODUCT PARAMETERS
Can be customized according to your requirements
PRODUCT FEATURES
Agricultural Single Span Plastic Film Greenhouse is widely used in the cultivation of tomato,vegetables, fruits and flowers. It can provide the conditions of suitable illumination, moisture and temperature, raising the output and resisting the natural disasters.
Single span plastic tunnel greenhouse is composed by hot galvanized pipe with three layers film for the covering material. The frame structure is simple, cheap cost and easy to install.
Hot galcanized steel, 15 years warranty;
Excellent heat preservation perfermance;
Energy saving;
Low invest and low running cost in winter;
Large vents in roof or sides, auto or manual to operate.
Single Span Greenhouse SCOPE OF APPLICATION
Widely used in planting The Vegetables and Flowers
Leaf Vegetables: Lettuce / Celery Cabbage / Cabbage / Spinacia / Celery / Oilseed Rape / Amaranth and so on
Fruits and Vegetables: Strawberry / Eggplant / Tomato / Green and Red Bell Pepper / Sword Bean / Green Bean / Balsam Pear / Pumpkin / Cucumber and the Big White Gourd and so on Flowers.
We can design and install farming and planting greenhouse for you according to your needs. You can choose single span greenhouse or multi span greenhouse, or contact us directly for the latest design!
The main sales all kinds of greenhouse: Single Span Greenhouse, Multi Span Greenhouse, Glass Greenhouse, PC Board Greenhouse
For more information about the greenhouse, please click here.

Agriculture Plastic Large Multi Span Greenhouse for Sale Plastic Film Multi-Span Greenhouses
The reinforced structure with lattice arches and squared columns offers extensive guarantees thanks to the resistance against wind, snow...
PRODUCT PARAMETERS
Can be customized according to your requirements
PRODUCT FEATURES
Plastic Film Multi-Span Greenhouses is technologically advanced, suitable for intensive farming in horticulture and floriculture that mostly need a solid structure, as well as combined with the most advanced systems of ventilation and climate management.
The reinforced structure with lattice arches and squared columns offers extensive guarantees thanks to the resistance against wind, snow, and at the same time allows hanging support to various types of cultivation.
SCOPE OF APPLICATION
Agriculture Multi Span Greenhouse Widely used in planting The Vegetables and Flowers
Leaf Vegetables: Lettuce / Celery Cabbage / Cabbage / Spinacia / Celery / Oilseed Rape / Amaranth and so on
Fruits and Vegetables: Strawberry / Eggplant / Tomato / Green and Red Bell Pepper / Sword Bean / Green Bean / Balsam Pear / Pumpkin / Cucumber and the Big White Gourd and so on Flowers.
We can design and install farming and planting greenhouse for you according to your needs. You can choose single span greenhouse or multi span greenhouse, or contact us directly for the latest design!
The main sales all kinds of greenhouse: Single Span Greenhouse, Multi Span Greenhouse, Glass Greenhouse, PC Board Greenhouse
For more information about the greenhouse, please click here.

Used of plastic waste recycling machine

Nowadays, many people advocate the “green” living, which is approved many people. So it is better to shred, melt and repurpose all these plastic materials instead of throwing away the waste plastic to pollute the environment.
Therefore, doing makes great efforts to develop and manufacture the used of plastic waste recycling machine, which is very popular after it comes into being. The used of plastic waste recycling machine is a great recycling machine which is can be widely applied to large-scale, large-volume recycling of post-consumer, post-commercial, and post-industrial plastic scrap. The used of plastic waste recycling machine is mainly used to reprocess plastic and make the material reusable for another product.

* T-shirt plastic bag making machine WCJX-400mm*2lines, is an ideal plastic machine to make T-shirt shopping bag. Material in HDPE, LDPE and recycle material, biodegradable plastic.

*T-shirt plastic mahcine WCJX-400mm*2 lines is our Star product of high-speed, 150-400 pcs/min/line in stable and high efficient work condition.

* Servo Motor and Inverter Control System.

* Magnetic powder brake system can slow speed in advance and avoid sudden stop. Have better control in tension without sudden vibration and save material.

* Mark pitches ahead function. Enlarge film distance range of 10mm.

* Adopt SICK sensor, AirTac electromagnetic valve and Shihlin inverter, etc. Famous brand of electro components contribute and improve machine accuracy at the same time prolong machine lifetime and maintenance cost.

* Bag length, set number can be changed via screen. Bag counting, machine speed can be seen on the screen. Sensor trace during production and easy for troubleshooting.

* Flexible optional configuration of electro component and functions according to meet customerâ??s market.

B-to-B grade PET bottle washing line is mainly supported in the recycling project of food grade recycled PET chips; it has a high degree of automation and avoids the human error to the maximum extent. Efficient mixing and testing systems are to ensure that the PET flakes can meet the standard of the following processing. B-to-B grade bottle washing line of our company can flexibly adjust and configure the equipment and the process according to the actual differences in raw materials input to meet customer needs in actual production. The whole line adopts the industrial control computer, with touch screen interact with PLC for control, which can intuitively and effectively control the various process parameters while collecting and recording the important process parameters on the whole line; we even combine the remote communication technologies to let our customers have no distance with us. It assists our users in production management practice, analysis and equipment maintenance. Meanwhile, the whole line is equipped with automatic material sorting machine and color sorter, which can greatly reduce the input of manpower and greatly improve the production efficiency, thus truly achieving the highly automated cleaning and recycling production line.
Process Intro
De-baling------Metal Separation------ Label Scrapping------- Label Separation-------- Presorting------Bottle Pre-washing ------Automatic Sorting/Manual Sorting -----Wet Grinding-------Drying-------Hot Flotation-------Friction-------Continuous Rinsing-----Drying--------Dust Removal------Packing� 
Our Service
1,pre-sale support:
Normally we suggest you paint our standard color , but we can supply customization paint service by paid.
2,after-sale service:
Warranty:1 year for machinery,6 months for electrical.
For mechanical parts, our guarantee duration is 12 months. If the part is broken within this period, we will send the spare parts immediately to the client for repairing.
3,technical support:
Normally, we send our engineer(s) to supervise the installation and commissioning. The buyer need to prepare the operation staff to implement it. BORETECH is able to send mechanical engineer, electrical engineer and operation engineer. The operation engineer is to help the buyer's labors to know how to operate the washing line and get the best efficiency.

Material:
HDPE,PP,UV stabilized
Weight:
8g/m2 10 g/m2
Color:
White, Green, Black
width:
1m, 1.2m, 1.5m, 1.8m, 2m
Length:
10m, 20 m, 25m, 100 m, 1000m
mesh:
10cm x 10 cm, 15cm x 15cm, 15cm x 17cm
Packing:
Extrusion net, paper tube and carton.
MOQ:
4 tons
Port:
Qingdao
deliver:
30 days

Specifications:
Span Width£º8m Length£ºAny lengthfor you option Section£º3m,4m or 6m
Wall Height£º2.5m,3.0m, 3.5m,4.0m Roof Height£ºWall Height + 1.8m
Optional£ºVentilation system,Cooling system,Shading System,Irrigation System,Heating System


Features:
1.More stronger than tunnel greenhouse,Foundation is required
2. Big inside room,suitable for large area.
3. Usually used to grow vegetables such as tomato,cucumber,chili etc,also grow cut flowers
4. All structure by hot galvanized steel pipe,Anti-rust for 10-15 years
5. Covered by 3-ply (PE+EVA Material) poly film (plastic film), Anti-UV,Anti-Drip
130micron/150micron/180micron/200 micron thickness for your choice
6. Wind Load: 130KM/H,Snow Load: 0.28KN/m2,Max. Rainwater Running Capacity140mm/h
7. All connectors are jointed by bolt,nut and washer and so on. No welding is required.

Features:
1.More stronger than tunnel greenhouse, foundation is required
2. Big inside room, suitable for large area.
3. Usually used to grow vegetables such as tomato, cucumber, chili etc, also grow cut flowers
4. All structure by hot galvanized steel pipe, anti-rust for 10-15 years
5. Covered by 3-ply (pe+eva material) poly film (plastic film), anti-uv, anti-drip
130micron/150micron/180micron/200 micron thickness for your choice
6. Wind load: 130km/h, snow load: 0.28kn/m2, max. Rainwater running capacity140mm/h
7. All connectors are jointed by bolt, nut and washer and so on. No welding is required.