Mirror is a reflecting surface that forms an image of an object when light rays coming from that object fall upon it. Usually mirrors are made of plate glass, one side of which is coated with metal or some special preparation to serve as a reflecting surface.
UPT offers dielectric coated mirrors and metal coated mirrors which are made of substrate such as Bk7, K9, Fused Silica, CaF2, Sapphire.
Penta Prisms / Beamsplitter Penta Prism / Wedge / Right Angle Prisms / Corner Cube Retroreflectors / Anamorphic Prisms / Dove Prisms / Rhomboid Prisms /
Reflection Prism / Dispersion Prisms
Penta Prisms
Penta prism can deviate an incident beam without inverting or reversing to 90.The deviation angle of 90 is independent of any rotation of the prism about an axis parallel to the line of intersection of the two reflecting faces. It is commonly used in Plumb Level, Surveying, Alignment, Range finding and Optical Tooling. The reflecting surfaces of this Prism must be coated with a metallic or dielectric coating. The standard Penta Prism reflecting surfaces are coated with aluminum or enhanced aluminum.
Note:
(1). Besides N-BK7 glass, other optical glass is available for custom-made Penta Prisms.
(2). Penta Prism at bigger size is available.
(3). Typical deviation tolerance is 1 minute, better precision such as 30 sec, 10 sec, 5 sec or 3 sec is available.
(4). Typical reflection is >90% by Al coating, other metal coating such as Ag, Cu, or High Reflection Dielectric Coating is available.
(5). Besides uncoating, Anti-Reflective(AR) coating is available upon request.
Elegant design butterfly-shape appearance, High grade plated-film used in all optic lenses.
This deivce is applicable to ophthalmology department of hospitals and spectacle store for precision measurement of visual functions such as myopia, hyperopia, astigmatism, eyesight balance, heterophoria, stereoscopic vision and eyesight amalgamation
Specification:
Sphere power range:+16.75D to 19.00D w/minimum reading 0.25D or 0.12D
(when using +0.12D auxiliary lens or optional±0.12D lens)
Cylinder power range:0 to -6.00D, w/minimum reading 0.25D or 0.12Dï¼?auxiliary lens)
0 to -8.00D(-2.00D auxiliary lens)
Astigmatic axis scale: 0 to 180° in 5° steps
Cross cylinder:±0.25D, reversal type (synchronized with astigmatic axis)
Rotary prism:0 to 20 D in 1 D steps
P.D. adjustment:48-80mm; step 1
Forehead rest adjustment:16mm
Convergence:the optical axes of the lenses are aligned at a distance of 400mm from enable convergence=57mm to 80mm.
Corneal distance:2mm forward and 5mm backward from standard plane with scale?
Jht640-75 is based on a higher resolution 640,480, 17,m pitch detector for long range surveillance, optional 320,240, 17,m pitch detector for medium range is also available. The binocular can be effectively used 24h, delivery high quality picture help personnel find the heat signature of people or other threat if hiding under trees and bushes even in total darkness, smoke and fog environment.
Features:
L integrating function of capture photo, record video and reviewing, which can be output by usb
L power control, contrast and brightness adjustment, image polarity conversion and 2,, 4, digital zoom
L binocular viewer display, contact with external display device is also available
L support up to 32gb sd card
L complete, free from dents, blister, cracks, chipped or sharp corners and other visible defects that can effect its serviceability and appearance
Nd filters include absorptive and reflective filters, which are used in attenuating lasers and other optical signals. Absorptive filters minimize back reflections, which can be reduced further by adding an antireflection coating to the filter. Reflective filters are available with either a bk7 or uv fused silica substrate.
Specification:
Materials:bk7 optical glass and fused silica etc
Diameter tolerance: +/-0.20
Thickness:0.5-3.0 mm
Parallelism 85%
Optical density tolerance:+/-5%
Coating:specified by customers
Specification
Data rate: 10/100M
Type: Copper
Distance: 100M
Connector: RJ45
DDM: Yes
Place of origin: Made in China
Port:Shenzhen
Features
1.Hot-pluggable SFP footprint
2.Extended case temperature range (0°C to +70°C )
3.Fully metallic enclosure for low EMI
4.Compact RJ-45 connector assembly
5.It supports RX_LOS(Loss of Signal) function
6.Compatible with IEEE802.3u
7.Access to physical layer IC via 2-wire serial bus
8.A 10/100BASE-TX/ 100BASE-FX converter
Optical module used in Ethernet, SDH, Sonet,Can be compatible with CISCO 2900 Series,CISCO 4000 Series, CISCO 5000 Series,HUAWEI, the pole into, D-Link, ZTE, HP, juniper and other equipment.
Our products require strict testing standards,standard packing form,to provide customers with quality service and timely delivery cycle.
Scope of application: switch, Ethernet, data center, SDH, SONET, ATM
Package type: Individual package or 10pc/package
10G SFP+ optical transceiver
ETU Model Cisco Model Allied Telesis Product description
ESP8592-3LCD03 SFP-10G-SR AT-SP10SR***â?? 10G SFP+ SR MM 850nm 300M LC connector with DDM
ESP3192-3LCD02 SFP-10G-LRM 10G SFP+ LR MM 1310nm 220M LC connector with DDM
ESP3192-3LCD10 SFP-10G-LR AT-SP10LR***â?? 10G SFP+ LR SM 1310nm 10KM LC connector with DDM
ESP5592-3LCD40 SFP-10G-ER ESP5592-3LCD40â?? 10G SFP+ ER SM 1550nm 40KM LC connector with DDM
ESP5592-3LCD80 SFP-10G-ZR AT-SP10ZR80/I***â?? 10G SFP+ ZR SM 1550nm 80KM LC connector with DDM
SFP optical transceiver
ETU Model Cisco Model Allied Telesis Product description
ES8512-3LCD05 GLC-SX-MM AT-SPSX 1.25G SFP MM 850nm 550M LC connector with DDM
ES3112-3LCD10 GLC-LH-SMD â?? 1.25G SFP SM 1310nm 10KM LC connector with DDM
ES3112-3LCD40 GLC-EX-SMD ES3112-3LCD40â?? 1.25G SFP SM 1310nm 40KM LC connector with DDM
ES5512-3LCD80 GLC-ZX-SMD AT-SPZX80â?? 1.25G SFP SM 1550nm 80km LC connector with DDM
ES3103-3LCD2 GLC-GE-100FX 155M SFP MM 1310nm 2KM LC connector with DDM
ES-T1-RJ45 GLC-T 1000M Copper-T RJ45 100M
I.High power optical amplifier - features
1. The olah is a fiber amplifier and power supply integrated in a 1ru&2ru shelf.
Multiple output ports can be chose.
2. The olah incorporates electrical control circuitry wit a digital signal
Processor and includes photodiodes for monitoring the optical
Input and output power through tap couplers.
3. Double cooling system can protect the pump laser to work in a long time.
4. Rj45 and rs 232 port, snmp management system.
5. Good stability, vfd displays the working conditions, good trouble alarm system.
