Find Verified Paradise Nuts Suppliers, Manufacturers and Wholesalers

00.580.6807 Toothed Belt 6AT 3*270 For SM74 PM74 Motor Bracket

PM74CN SM74 CN SX74 Machine Offset Printing Parts

Offset Printing Machine Parts

Original and New

90 Teeth

Please don't hesitate to contact me if you have any question.

SM 102 61.144.1101/02 Geared motor
SM 102 61.144.1111/02 Geared motor
SM 102 61.144.1121/03 Geared motor Potige.i=4,4
SM 102 61.144.1131/01 Geared motor Druckbeistellu.
SM 102 61.144.1141/01 Servo-drive Fa.Dunk Potige.i=18,9
SM 102 61.144.1151/01 Servo-drive Fa.Dunker
SM 102 61.144.1161/01 Servo-drive Fa.Dunker
SM 102 61.147.1272/01 Limit switch 12S117
SM 102 61.147.3731/01 Connecting line 15/90M1:X2 stand.
SM 102 61.148.1312/02 Sensor CONDUC MEAS LEVL
SM 102 61.148.1343/03 Sensor US MEAS PROX
SM 102 61.164.1467/ Powder container
SM 102 61.164.1487/ Vibrator
SM 102 61.164.1505/ Compressor
SM 102 61.164.1521/ Powder quantity sensor
SM 102 61.164.1550/03 Electronic control box mit Adapterkabel
SM 102 61.164.1560/03 Electronic control box
SM 102 61.164.1597/ Strap
SM 102 61.164.1737/ Set of rotor vanes
SM 102 61.164.1767/ Motor
SM 102 61.164.1821/ Container bottom
SM 102 61.164.1827/ Microswitch
SM 102
Microswitch 2090053
SM 102 61.164.1837/ Nut
SM 102 61.164.1867/ Swinging system 4130195
SM 102 61.164.1877/ Safety washer
SM 102 61.164.1887/ Lock nut
SM 102 61.165.1561/ Flat module SUM1
SM 102 61.165.1651/02 Sensor EMECH POT ABS
SM 102
Sensor EMECH-POT-ABS
SM 102 61.165.1661/02 Sensor EMECH POT ABS
SM 102
Sensor EMECH-POT-ABS
SM 102 61.178.1343/ Geared motor Heberfeuchtwerk SM

Product description
Luhui r32 self drilling hollow anchor bolts is mainly used in underground engineering , like weak surrounding rock, fault fracture zone, highland stress large deformation and other complex geology. Especially in serious hole collapse and deep fault rock situation, ordinary anchor rod is incapable of action. Lhz anchor bolt set drilling, grouting, lengthen and anchoring multifunction all in one, in all kinds of bad surrounding rock engineering applications achieved ideal support effect.

SizeLength
(m)Weight(kg/m)Outer
(mm)Inner
(mm)Cross section(mm²)Ultimate load(kn)Yield load
(kn)
R32l2.0-4.05.4-10.83221.5304210160
R32n2.0-4.06.8-13.63218.5396280230
R32s2.0-4.08.2-16.43215.0488360280
Tunnelling ground engineering

• radial bolting • slope stabilization

• forepoling • micro injection pile

• face stabilization • temporary support anchor

• portal preparation • soil nailing

Technology process
1. Connect the alloy drill and anchor rod one end, on the other end, connect the drill sleeve and shank adapter , then connect the drilling rig or hand-held drill. Then start drilling, fill the cooling water while drilling.( if you want to lengthen the anchor rod, can connect the coupling, and then drilling)
2. Take down the drill, put the stop-grouting plug into the rod, and insert it to the hole, then ready to grout. Special circumstances like surrounding rock grouting tension is over or surrounding rock is too broken, can use anchor agent to seal the hole.
3. Connect quick grouting coupling and anchor rod end, connect other end of grouting machine.
4. Start grouting, when grouting full and reach design value then power off . Grouting pressure according to the design parameters and grouting machine performance determine , cement/sand reference values is 1:0 ~ 1:1, water/cement reference value is 0.45:1 ~ 0.5:1.
5. Install anchor plate and nuts, and tighten nuts.

Biomass gasifier and biomass gasification power plant we supply here is using 100% agricultural and forest waste as fuel. The biomass gasifier (reactor) can convert the above mentioned biomass fuel into syngas for thermal application and power generation. The company has developed and commercialized a wide range of biomass gasifier ranging from 50kw output to 1200kw output. The biomass gasifier and gasification system is applied to biomass power generation plant, biomass centralized gas supply for cooking and heating. The biomass gasifier and biomass gasification system can also be applied to replacing LNG and diesel oil for thermal application and baking & drying agricultural products. Our equipments have been serving in rice mill, timber mill, food industry (especially nuts), village, and Tobacco Company safely and reliably. Both downdraft fixed bed gasifier and fluidizedbed gasifier is available. If customers have special requirements, unique design, manufacture and delivery can be made on your demand.

Applicable Fuel for biomass gasifier gasification system:
Agricultural waste and residua, wood waste and residua, nut shell, other waste and residua.

1. Power Plant Scale: 200kw
2. Engine & Generator Type: gas engine and generator using 100% biomass gas as fuel
3. Rotary speed of engine: 1500Rpm
4. Gasifier Type: Fixed bed downdraft biomass gasifier
5. Gasifier Gas Output: 750Nm3/hr
6. Gasification Agent: Air
7. Gasifier Outlet Gas Temperature: 700-800 degree
8. Gas temperature after Cooling: Below 45 degree
9. Biomass Fuel Consumption: 400-440KG/Hr
10. Biomass gas heat value: Normally 3000-6000KJ/Nm3
11. Application: for power generation or for thermal application
12. Site area requirement: about 90 square meters.


The whole gasification process is environment-friendly with low NOx in the engine exhaust and nearly no sulfur oxide emission (SOx). H2S is very less, which usually can be ignored.Welcome to contact with us for more information.

1.All the materials, tubes, pipes and valves in touch with beer reach food grade standards.
2.Faucets processed fine, welding precision meets sanitary standard.
3.Materialï¼?brass / bodyã?? nuts; stainless steel / connecting pipeã??plungerã??tap spoutã??springs; ABS / packing of tap spout; plastic handle
Process Technicï¼?hot forging / digital controlled lathe
Connected with: beer tower, keg coupler, beer keg spear, beer cooler, beer keg, pressure regulator
Use Occasionsï¼?KTV, bar, hotel, dinning room, living room.
4.The advantage of chrome plating and PVD gold plating is that it is not easy to fade, wear-resistant, corrosion-resistant.
5.Our beer taps designed exquisite and elegant, wholesome and convenient.
6.The products of our manufacturer easy to maintain, convenient to operation, advanced design and manufacture sophisticated.

1.The products of our manufacturer easy to maintain, convenient to operation, advanced design and manufacture sophisticated.
2.All the materials, tubes, pipes and valves in touch with beer reach food grade standards.
3.Faucets processed fine, welding precision meets sanitary standard.
4.Materialï¼?brass / bodyã??compensator regulator rockerã?? nuts; stainless steel / connecting pipeã??plungerã??compensatorã??tap spoutã??springs; ABS / packing of tap spout; plastic handle
Process Technicï¼?hot forging / digital controlled lathe
Connected with: beer tower, keg coupler, beer keg spear, beer cooler, beer keg, pressure regulator
Use Occasionsï¼?KTV, bar, hotel, dinning room, living room.
5.The advantage of chrome plating and PVD gold plating is that it is not easy to fade, wear-resistant, corrosion-resistant.
6.Our beer taps designed exquisite and elegant, wholesome and convenient.

1.Faucets processed fine, welding precision meets sanitary standard.
2.Materialï¼?brass / bodyã??compensator regulator rockerã?? nuts; stainless steel / connecting pipeã??plungerã??tap spoutã??springs; ABS / packing of tap spout; plastic / handleã??compensator
Process Technicï¼?hot forging / digital controlled lathe
Connected with: beer tower, keg coupler, beer keg spear, beer cooler, beer keg, pressure regulator
Use Occasionsï¼?KTV, bar, hotel, dinning room, living room.
3.The advantage of chrome plating and PVD gold plating is that it is not easy to fade, wear-resistant, corrosion-resistant.
4.Our beer taps designed exquisite and elegant, wholesome and convenient.
5.The products of our manufacturer easy to maintain, convenient to operation, advanced design and manufacture sophisticated.
6.All the materials, tubes, pipes and valves in touch with beer reach food grade standards.

Electrical data:
Rated voltage: 60v ac/dc
Insulation resistance:>20m omega
Rated current: 4a
Contact resistance: <=5m omega
Ambient temperature: -10 degree ~ +70 degree (short term -25 degree ~ +90 degree )

Connector specification:
Polarity: 3, 4, 5 poles
Overmold: tpu
Contacts: brass with gold plating
Insert: pa + gf
Coupling nut/screw: brass with nickel plating
Degree of protection: ip67

Cable specification:
Cable type: pvc cable
Cable length: customized
Cable jacket: pvc(pur)
Core insulation material: pvc
Core insulation colors: brown, blue, black
Core cross-section: 0.25 m2 * 3c

We are m8 m12 male and female, straight and right angled circular sensor connectors with and without cable manufacturer in china.

1 set in a plastic bag

Application
Model THY-210G can be applied to various engineering machinery and agricultural machinery powered by diesel engine below 400HP.
â?¡.Structural Features
The product is made up of aluminium alloy cover and high-strength transparent cylinder,with good features of removable single barrel,small size,light weight and easy installation ( can be installed water level sensor ).Beside,the position of double oil inlet / oil outlet can be customized by clientâ??s request.
â?¢.Technical Specs
Size: 140 x 160 x 353 (mm)
Inside diameter of oil hoses: â??10
Rated flux: 0~7.5 L/min
Net Weight: 2Kg
Rated Pressure:0.9 Mpa
Filter element & No. : C1020ADLR x 1
Size of Screw thread : M18 x 1.5
Accessories: 2 sets ( Articulated Joint,Gaskets,Bolts,Nuts )

Workmanship specification:

Produced under iso 9001 quality management system, conform to tuv-gs din 79000 standard.

Materials:high quality steel and hot galvanized steel is optional.

Main pipe thickness is 3.00mm, supporting part is 2.75mm.

Sand blasting machine to clean the rust before coating.

Powder coating:electrostatic coating, lacquer that bake treatment. First layer epoxy powder(50-80um), second layer plastic powder(90-140um).

Welding technique:arc-welding, cabon-dioxide welding, mixed-gas welding.

Stainless screws and nuts.

Bearings are from nsk.


Product name:outdoor elliptical trainer (txj-l012)

Si capacity:2000 pcs/month

Function: developing the whole body joints, strengthening cardiac and pneumonic function, and shaping figure.

Direction: putt your feet on the pedals, holding the handles with your both hands and moving your hands and feet alternately.

Features:
A. Roof vent, which is fixed, can be good ventilation on the top, especially suitable for hot areas, like africa, middle-ease, south-east asia, south-america and so on
B. The height can be adjustable, also meet the needs of different clients personalized
C. As the span quantity is for you optional, it can suitable for big area planting
D. Usually used to grow vegetables, like tomato, cucumber, chili etc, also grow cut flowers
E. All structure built by hot galvanized steel pipe, anti-rust for 10~15 years
F. Covered by 3-ply (pe+eva material) poly film (plastic film), anti-uv, anti-drip
130micron/150micron/180micron/200 micron thickness for your choice
G. All connectors are jointed by bolt¡¡¨¦nut and washer and so on. No welding is required

Common name: Acetochlor
Chemicalname:2-chloro-N-(ethoxymethyl)-N-(2-ethyl-6-methylphenyl)acetamide
CAS NO.: 34256-82-1
Molecular formular:C14H20ClNO2
Molecular weight:269.8
CAS.NO.:34256-82-1
Structural formula
Formulation: 92% TC 900g/L EC
Appearance: TC: light brown ropy liquid; EC: purple transparent liquid .
Pack: TC:200kg barrel EC: 20L plastic barrel or as customerf+s requirement.
Mode of action: Selective herbicide, absorbed mainly by the shoots and secondarily by the roots of germinating plants.
Appliance: Used pre-emergence or pre-plant to control annual grasses, certain annual broad-leaved weeds and yellow nuts edge in maize (at 3 kg/ha), peanuts, soy beans, cotton, potatoes and sugar cane.



Pack: TC:200kg barrel EC: 20L plastic barrel or as customerf+s requirement.

1.The units:
*large vertical automatic packaging machine.
*mulithead weigher
*working platform
*z type material conveyer
*vibration feeder
*finished products conveyer+ check weigher

2.Features:
*fully-automatically complete all the process from feeding, weighing, filling and bag-making, date-printing to finished products outputting;
*high weighing precision and efficiency;


3.Range of application:
It is suitable for weighing of granule, slice, roll or irregular shape products such as candy, seed, jelly, fries, coffee, granule, peanut, puffyfood, biscuit, chocolate, nut, yogurt pet food, frozen foods, etc.It is also suitable for weighing small hardware and plastic component.

4.Specification:
* system output: 3456 ton per year.
* packaging speed: 30-70ppm.
* packaging accuracy: 0.1-1.5g (depends on the material)
* packaging capacity: 10~6500g
* operation panel: english, spanish and korean etc.

Application:
It is suitable for weighing of granule, slice, roll or irregular shape materials such as candy, seed, jelly, fries, coffee granule, peanut, puffy food, biscuit, chocolate, nut, yogurt pet food, frozen foods, etc. It is also suitable for weighing small hardware and plastic component.

Outstanding features:
Can be connected to a computer to see and print the data statistics.
With a timing hopper device, you have multiple options with auto selection: =+with timing hopper always open for one bagging machine, product discharged directly from weigher into bagging machine; =+feed two bagging machines with diverter chute gate; =ªfeed one bagging machine and reject under or overweight products with diverter chute.
*facility to maximize or minimize the operation angle to the size of the product. This will achieve high speeds with precision;
*the weigh hopper can be preset to open in order (staggered) to avoid blockages with puffy or problem products.

Magnetic bars are usually made of SUS304,SUS316 or SUS 316L tubes filled with permanent magnets by specialized design. Either round or square shape bars are available for customers' requirements for special applications.

Size: Our standard magnetic bar is 25 mm (1 inch) in diameter and any length per customers' request up to 2500mm, the diameter of round magnetic bar can be smallest 10 mm and largest 101.6 mm .

Working Temperature: Our ordinary temperature is 80 degree, but if demand, we can make up to 350 degredd to meet your special applications

Special ends : nailhead, eye nuts, thread hole ,thread rod and other kind of ends.

Magnetic Force: Specific to every customer's requirement. The highest magnetic strength for Dia. 25 mm magnetic bar can achieve 12,000 GS (1.2 Tesla).


Case or wooden box