Find Verified Other Frozen Fruits Suppliers, Manufacturers and Wholesalers

Customized Insulation Piercing Connector
Customized Flameproof Insulated Piercing Connector
Insulation Piercing Connector for Insulated Overhead Lines
1kV Insulation piercing grounding connectors (CONWELL type) selection table
Type (mm2)
Main Line
Section (mm2)
Branch Section Bolt Quantity
(pcs)
KWLW-1 5-120 35-70 1
KWLW-2 35-70 16-35 1
KWLB-1 16-95 16-95 1
KWLB-2 1
KWDM-1 16-120 4-35 1
KW4-150-2P 16-150 16-150 2
KW2-95B 16-95 4-50 2
KW4-150A 16-150 16-150 2
lation piercing connector(IPC)
1. Piercing connector, simple installation, need not strip the cable coat.
2. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead.
3. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector.
4. Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al.
5. Small electric connecting resistance, connecting resistance less than 2.5 times of the resistance of branch conductor with the same length.in accordance with the standard DL/T765.1-2001.
6. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 12kV.
7. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (0.75mm2-400mm2/td)
Sali main products: Ball Eye, Tension Clamp, Socket Clevis Eye, Anchor Clamp, Crossarm, Insulator, Pole Line Hardware, Insulator Pin, Clevis etc.
Performance testing
1. Mechanical performance: the grip force of the wire clamp is 1/10 bigger than the break force of the lead, It comply with GB2314-1997.
2. Temperature rise performance: under the condition of big current, the temperature rise of connector is less than that of connection lead.
3. Heat circle performance: conforms to GB/T2317.3-2000, the heat circle trial standard for electric fitting.
4. Waterproof insulation performance: conforms to the relevant testing requirements in Part 2 of GB/T13140.4-1998.
5. Resistance to corrosion performance: under the condition of SO2 and salt fog, it can do three times of fourteen days circle testing.
6. Environmental aging performance: under the circumstance of ultraviolet, radiation, dry and moist, expose it with change of temperature and heat impulse for six weeks.
7. Fire-proof performance: insulation material of the connector withstands glowing filament test. Conform to the requirements in Chapter 4-10 of GB/T5169.4.


-

1. Piercing connector, simple installation, need not strip the cable coat.
2. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead.
3. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector.
4. Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al.
5. Small electric connecting resistance, connecting resistance less than 2.5 times of the resistance of branch conductor with the same length.in accordance with the standard DL/T765.1-2001.
6. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 12kV.
7. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (0.75mm2-400mm2/td)
Sali main products: Ball Eye, Tension Clamp, Socket Clevis Eye, Anchor Clamp, Crossarm, Insulator, Pole Line Hardware, Insulator Pin, Clevis etc.

-

black vinyl chicken wire
hole: 3/4''
wire diameter: 1.2mm before PVC, 1.8mm after PVC
roll: 24 inch x 150 feet

Razor blade type and speciafication
Reference

number

Thickness

(mm)

Wire diameter

(mm)

Barb length

(mm)

Barb width

(mm)

barb spacing(mm)
BTO-12 0.4±0.05 2.5±0.1 12±1 15±1 26±1
BTO-15 0.4±0.05 2.5±0.1 15±1 15±1 33±1
BTO-22 0.4±0.05 2.5±0.1 22±1 15±1 34±1
BTO-30 0.4±0.05 2.5±0.1 30±1 18±1 45±1
BTO-25 0.4±0.05 2.5±0.1 25±1 16±1 40±1
BTO-60 0.5±0.05 2.5±0.1 60±2 32±1 100±2
BTO-65 0.5±0.05 2.5±0.1 65±2 21±1 100±2


â?¥ Razor wire is a kind of modern security fencing materials fabricated with razor-sharp steel blade and high-tensile wire.

â?¥ Barbed Tape can be installed to achieve the result of frightening and stopping to the aggressive perimeter intruders, with piecing and cutting razor blades mounted at the top of the wall, also the special designs making climbing and touching extremely difficult.

â?¥ The wire and strip are galvanized to prevent corrosion.

â?¥ Material: Stainless steel, hot dipped Galvanized steel, PVC coated steel

ABB PM851 AC 800M controller

Contact:Emily


Quantity available: 1

Warranty: In excellent condition 12 months.

Lead time: 1-2 working days.

Terms of payment:T/T and Western Union.

NEW AND ORIGINAL FACTORY INDIVIDUAL INNER SEALED PACKAGE BOX AS PER PRODUCT SIZE

Other items as below:

DSRF180A

DSRF160

DSRF150

DSRF 160M

DSRF 154M

DSRB310

DSRB110

DSPX 3221

DSPC3221

DSPC3122

DSPC3121

DSPC3001

DSPC172H

DSPC172-2

DSPC172

DSPC171

DSPC170H

DSPC170

DSPC157

DSPC155

DSCL110A

DSCA190V

DSCA180B

DSCA130

DSCA125A

DSCA114

OPC-N3 PM2.5 Particle Sensor

* PM1 , PM2.5 and PM10
* Reduced power standby mode
* Capability to measure up to 2,000 µ g/m 3
* Onboard temperature and humidity sensor
* SPI interface not included, order code 000-0SPI-00

OPC-N3 PM2.5 Particle Sensor Specifications
* Particle range: 0.38 to 40 Spherical equivalent size
* Size categorisation: 24 Number of software bins
* Total flow rate (typical): 1.2 L/min
* Sample flow rate (typical): 220 mL/min
* Voltage range: 4.8 to 5.2 VDC
* Temperature range: -10 to 50'C
* Humidity range: 0 to 95 % rh non-condensing
* Weight: < 105g

DL0001 Laser Dust Sensor Introduction
The Laser Dust Sensor is used to measure the concentration of suspended particles in the air with different sizes (including PM2.5). It uses a laser diode as the light source to illuminate the sampling air boosted by the blower. When the small particles in the air enter the illuminated area, the laser beam is scattered. The scattered light is received by a photodetector and converted into current signal which is amplified and processed then to indicate the concentration of particles. A built-in microprocessor converts it into mass concentration (μg/m3) and outputs the signal via universal digital interface.

DL0001 Laser Dust Sensor Features
* Lensless design to ensure good consistency
* High accuracy measurement
* Can detect particles as small as 0.3μm in diameter

DL0001 Laser Dust Sensor Applications
* Ventilation system
* Air purifier
* Air quality monitor
* Automotive air purification
* Air conditioner
* Other home appliances

DL0001 Laser Dust Sensor Technical Parameters
* Measuring range of particles: 0.3~1.0; 1.0~2.5; 2.5~10 μm
* Effective range of particle mass concentration: 0~500 μg/m3
* Maximum range of particle mass concentration: 999 μg/m3
* Resolution: 1 μg/m3
* Single measurement response time: 1s
* Total response time: 10s
* DC power supply voltage: 5.0 V
* Working current: 100 mA

H2S-AE Hydrogen Sulfide Sensor (H2S Sensor) Description
Alphasense Hydrogen Sulfide gas sensors operate using well-known fuel cell technology.

H2S-AE Hydrogen Sulfide Sensor size:
20mm diameter, the industry standard size for portable gas detectors

With very high sensitivity and low zero, accurate and stable readings are possible when measuring current concentration ranges from ppb to 1% H2S.

H2S-AE Hydrogen Sulfide Sensor (H2S Sensor) Specifications
* Range: 2,000 ppm H2S limit of performance warranty
* Sensitivity: 65 to 110 nA/ppm in 400ppm H2S
* Response time t90: < 25 (s) from zero to 400ppm H2S
* Resolution: < 0.5 RMS noise (ppm equivalent)
* Temperature range: -30 to 50 'C
* Pressure range: 80 to 120 kPa
* Humidity range: 15 to 90 % rh continuous
* Weight: < 6g

CO-BM Carbon Monoxide Sensor (CO Sensor) Description
Alphasense Carbon Monoxide gas sensors operate using proven fuel cell technology.

CO-BM Carbon Monoxide Sensor sizes:
32mm diameter package, the best choice for fixed site applications

The Alphasense family of CO sensors have proven themselves in the field with long term stability and reliable operation, well beyond the two-year warranty, using our patented electrode technology.

CO-BM Carbon Monoxide Sensor (CO Sensor) Specifications
* Range: 5,000 ppm limit of performance warranty
* Sensitivity: 80 to 130 nA/ppm in 400ppm CO
* Response time (t90): < 25 (s) from zero to 400ppm CO
* Resolution: < 0.5 RMS noise (ppm equivalent)
* Temperature range: -30 to 50'C
* Pressure range:80 to 120KPa
* Humidity range: 15 to 90 % rh continuous
* Weight: < 13g

MB7066 XL-MaxSonar-WRL1
High Performance Ultrasonic Precision Rangefinder

MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Product Description
The XL-MaxSonar-WRL1 is our longest range (10m) outdoor sensor.

The weather resistant XL-MaxSonar-WR is a rugged ultrasonic sensor component module. This outdoor sensor provides very short to long distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4-inch PVC pipe fittings.

High output acoustic power combined with continuously variable gain, real-time background automatic calibration, realâ??time waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electrical noise sources. The XL-MaxSonar-WR sensors are factory calibrated to match narrow sensor beam patterns and provide reliable long range detection zones.

MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Product Specifications
* Resolution of 1 cm
* 10Hz read rate
* 42kHz Ultrasonic sensor measures distance to objects
* RoHS Compliant
* Read from all 3 select sensor outputs: Analog Voltage, Serial, Pulse Width
* Operates from 3.0-5.5V
* Low 3.4mA average current requirement
* Small, light weight module
* Designed for easy integration into your project or product
* Operational Temperature from -40'C to +70'C (-40'F to +160'F)
* Real-time automatic calibration (voltage, humidity, ambient noise)
* Firmware filtering for better noise tolerance and clutter rejection
* 200,000+ Hours Mean Time Between Failure
* Weather Resistant (IP67), optional Chemical Resistant F-Option
* Matches standard electrical 3/4-inch PVC pipe fittings for easy mounting (3/4â?³ National Pipe Thread Straight)
* Our longest range outdoor, weather resistant, ultrasonic sensor
* Maximum range of 1068 cm (450 inches)
* Long range, narrow detection zone

MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Features and Benefits
* Extended 10 meter range detection and outputs
* High acoustic power output
* Readings can occur up to every 100ms, 10-Hz rate
* Triggered operation provides the range reading as desired
* Fast measurement cycle
* Quality narrow beam characteristics
* Low cost, long range IP67 sensor

MB7066 XL-MaxSonar-WRL1 Ultrasonic Rangefinder Applications and Uses
* Robot ranging sensor
* Autonomous navigation
* Distance measuring
* Long range object detection
* Industrial sensor

18650 battery 24V 25.9V 29.4V 10Ah rechargeable lithium battery pack for backup system/ electric bicycle ebike

Product parameters: 

Single battery capacity: 2500mah

Combination: 7S4P

Input voltage: 29.4 V

Output voltage: 20-29.4 V

Combined capacity: 10000 mah (10 ah), ±5%, 

Size: 192*85*57(7S4P), ±5mm

External packing: Blue PVC

With protection circuit: Have overcharge, discharge, over current, short circuit protection function! (BMS)

If you have other need can contact with the owner, thank you all for the new and old customer consultation. 


The battery requirements: It can match with 29.4V 2A or 4A charger.


1: Need li-ion battery chargers for; Constant current constant voltage; 

2: Charging voltage: 29.4 V

3: Charging current: 2A or 4A


The battery discharge requirements: 


1: The output of 2 lines, 100 mm long, red and black one

2: The input leads to a line 2.1 socket, 100 mm long

3: The rated discharge current: 4 a

4: Maximum instantaneous current: 10 a

5: Maximum working current: 5 a

6: The product is a built-in battery, do 2 output wires, output input if there is any other requirement can contact the owner, the above parameters for the default delivery.

FAQ
1. Q: Whatâ??s your best price?
Please send us an inquiry with product's specification and your estimate MOQ. You will have the prompt reply within 12 hours. If you are very urgent to get the price, please call us or tell us in your email so that we'll regard your inquiry priority.
2. Q: Can I get a sample to check your quality?
Of course, we can always provide you one or ten samples. It has never been a problem. Please contact our sales. Customized is available.
3. Q: Do you have any MOQ limit?
Yes, different types of products have different MOQ for massive production. 
4. Q: What is full charged?
With charging voltage 4.2V, current 0.2C continued to charge the battery pack, when charging current drops to 0.02C charging is terminated, shall be full charged.
5. Q: What is full discharged?
Standard discharge current 0.2 C for continuous discharge, when the voltage drops to discharge cut-off voltage 3.0V discharge is terminated, shall be full discharged.
6. Q: Why do we need to know your charging current,Max/Continuous discharging current?
Firstly, we should be informed that what products the battery will be apply for. Then it comes to those specifications. Because our sales are working together with our engineers to provide you the right and best goods. Those are what they need to know before they start making samples.
7. Q: Can you do ODM orders?
Yes. We've got the whole professional team here waiting for your arrival.
Main markets
Our main markets are North America, Europe, Japan, Korea, and other countries in east Asia, etc.

Our capability:
-we can design, manufacture, testing various kinds of transformers up to 5000kva according to iec standards, ansi standards, bs standards, en61558 standards and technical specifications from client.
-we have exported our transformers to usa over $700, 000 every year.

Our major products:
-oil immersed distribution transformers up to 5000kva.
-dry type transformers up to 5000kva.
-isolation transformers: three phase from 100va to 5000kva and single phase from 25va to 500kva.
-auto transformers: three phase from 100va to 5000kva and single phase from 25va to 500kva.
-medical transformers up to 1600kva.
-toroidal transformers up to 100kva.
-auto voltage regulator(voltage stabilizer) up to 5000kva.
-eps, ups transformers.
-rectifier transformers.
-control transformers.
-reactor is included:
Parallel, serial reactor. Filter reactor. Starting reactor. Dc reactor. High frequency resonant inductance.

1. Material: PVC coated + galvanized steel strip
2. Temperature range: -10â??---+80â??
3. Normal size: 3/16"---4"
4. PVC color: black, grey
5. Product features:
(1). Hot-dipped galvanized steel strip with special anticorrosion treatment.
(2). PVC surfaced thickened layer, having super soft and excellent bending performance, straong tensile resistant, not easily broken or deformed.

Linear hall sensor ah3507
Hall sensor
Hall switch
Features
Rated working voltage 4.5 v ~ 6 v;
Operating temperature range: -40, ~ 125,
Rail to rail voltage output, rated output current : 6 ma;
Variety of package forms and outer packings for your choice;
No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;
Products meet the eu rohs instruction 2011/65 / eu and reach regulations 1907/2006 / eu requirements.
Ah3507 is a kind of analog signal output hall ic, the output voltage changes with the changes of magnetic field. The sensor chip has built-in reverse voltage protection, voltage regulators, temperature compensation circuit, hall-voltage generator, signal amplifier, and other circuit unit etc. Excellent voltage regulator and temperature compensation circuit ensure the sensor stab
le operates ove r a wide vo ltage range and temperature range, and the reverse voltage protection circuit avoids the sensor to be damaged by reverse voltage.

Micropower Omnipolar Hall Sensor AH3663
Hall Sensor
Hall Switch
Features
Micropower designing;
Rated supply voltage �2.4 V ~ 5.5 V;
Omnipolar operating, no N or S pole in excitation magnetic field, high magnetic sensitivity, highly symmetry in positive and negative magnetic switch point;
Built-in dynamic imbalance voltage compensition circuit, high temperature stability, Small temperature drift in switch point, resistant to mechanical stress and thermal stress, the power consumption is only 8W when the power supply is 2.75V;
Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements.

Micropowr hall sensor ah3662
Hall sensor
Hall switch
Features
Micropower designing;
Rated supply voltage , 2.4 v ~ 5.5 v;
Omnipolar operating, no , nor , spole in excitation magnetic field, high magnetic sensitivity, highly symmetry in positive and negative magnetic switch point;
Built-in dynamic imbalance voltage compensition circuit, high temperature stability, small temperature drift in switch point, resistant to mechanical stress and thermal stress, the power consumption is only 8, w when the power supply is 2.75v;
Built-in pull-up resistor;
Products meet the eu
Rohs instruction 2011/65 / eu and reach regulations 1907/2006 / eu requirements.
Outline
Ah3662 is a kind of high sensitivity omnipolar micropower hall sensor. The special designing circuit enable the sensor has omnipolar (no , sor , npole) magnetic field excitation function, excellent positive and negative switch symmetry, and bitty average power consumption current. When the magnet (no , sor , npole) is closed to sensor, , , the sensor outputs low level; when the magnet is far away from sensor the sensor outputs high level.

Unipolar type hall sensor ah3144
Hall sensor
Hall switch
Features
Rated working voltage 4.5 v ~ 24 v, the limit voltages as low as 3.5 v;
Operating temperature range: -40 ~ 150;
Rated output current(sink) : 25 ma, the maximum output current(sink): 50 ma;
Switch response time is about 1s, the operating frequency dc ~ 100 khz;
Small temperature drift between operating point and release point;
There are variety of packages and out packing options;
No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;
Products meet the eu rohs instruction 2011/65 / eu and reach regulations 1907/2006 / eu requirements.
Outline
When the s, pole of magnet faces thbrp, the sensor outputs high level. When the n, pole faces the mark surface, the sensor is no response. Stable hysteresis(, bh= |bop- brp|, ensure the stable sensors switch status.

Hall effect encoder
Coder sensor
Code sensor manufacturer
Company relies on its advanced technology strength, rich industrial experiences and veracious market visibility, it established abroad strategic cooperation relations with top professional manufacturers of ic designing, manufacturing, package and testing in the united states and taiwan and home, and the company all along exerts the most advanced designing and manufacture technology to ensure the product and technology in the highest flight, and furthest ensure the coherence and reliability and stability of the products.
The products of , nanjing ah electronic science & technology co., ltd includes ah series unipolar hall switch ic, ah series bipolar hall ic, ah series latch hall switch ic, ah series linear hall ic, wg series zero power consumption magnetic sensor, and all kinds of customized products.

Flow-sensors
Flow meter
Flow meter sensor, flow sensors
Product description
Medium flow solution
Food grade material, it can be worked in the water which temperature is 100, c.
Wide operating voltage range
Stable square wave signal
No need external circuit,
No need customer to install magnetic field
General application:
Teaset, supply equipment etc for civil use, and appliance for commercial use.
Feature:
The through type hall effect flo
w sensor ah-001 is based on hall effect element, and it's very simple to use, the output signal is square wave, and it's accurate and relia ble, the customer can use it by connect it as per the operating note, it can be applied in the digital circuit and mcu simply. The food grade material make it can be applied in different occasions, the operating temperature can reach 100, c.

Gear sensor
Gear sensor china, gear sensor manufacturer
Company relies on its advanced technology strength, rich industrial experiences and veracious market visibility, it established abroad strategic cooperation relations with top professional manufacturers of ic designing, manufacturing, package and testing in the united states and taiwan and home, and the company all along exerts the most advanced designing and manufacture technology to ensure the product and technology in the highest flight, and furthest ensure the coherence and reliability and stability of the products.
The products of , nanjing ah electronic science & technology co., ltd , includes ah series unipolar hall switch ic, ah series bipolar hall ic, ah series latch hall switch ic, ah series linear hall ic, wg series zero power consumption magnetic sensor, and all kinds of customized products.