Find Verified Sulphur Ore Suppliers, Manufacturers and Wholesalers

We are a manufacturer which is specialized in producing rubber o rings, flat washer , o ring cord, o ring kit, ed ring and special rubber parts.
The materials can be nbr, viton(fkm), silicon, epdm, cr, pu, aflas or approved by nsf, fda, wras material.

-

We are anode carbon block supplier&exporter from china.
We are offering our customers a wide range of prebaked anode carbon block, which are used as node in aluminium electrolysis, made from fine hot asphalt and petroleum coke, produced under advanced mechanical technologies.. Our prebake carbon anodes are low ash, low sulphur, low resistivity, high compressive strength, high flexural strength, high apparent density. They are suitable for high-power electrolysis cells.


Size as your drawing.

Heat resistant conveyor belt

Applicable for those places that temperature is more than 60, such as sintering ore, coke factory, cement factoruy, chemical factory and casting factory.

Yoke type track roller bearing of NUTR series is the full cylindrical roller bearing.It can be bear much heavy load,both the axial load and the
radial load.It is widely used to the vocation of
ore,metallurgy,transportation,lifting equipment and so on.



Natural packing

High temperature resistant conveyor belt:

Mainly used in metallury and constructions industries. Conveying high temperature materials including sintering ore, coke and clinker. The temperature of the conveyor belt surface in not more than 220.

Specialized formulating of recipe, light in weight, has long life, and can resist high temperature well.

Purity:99.999999%;
Size:Customizwed;

Graphited asbestos packing with oil
t202l1 t emperature+q450f¦ ph:2-13 linear speed:10m/s pressure:80bar at202l2 temperature+q250f¦ ph:2-13 linear speed:8m/s pressure:60bar

1volume/polybag

Specification:
The material of housing is always low carbon steel,stainless steel is used in special occasion.
the needle roller is made of chrome steel.
classification by seal,there is the one with seal named PP and the one without seal;classification by profile,there is cylinder and sphericl;classification by internal structure,
there is standard type NATR and full needle roller type NATV.It can be bear much heavy load,both the axial load and the radial load.

Application:
It is widely used to the vocation of
ore,metallurgy,transportation,lifting equipment, and so on.

Natural packing

Expanded Pure graphite tape is cutted of flexible graphite rolls,Graphite tape filler for spiral wound gasket,In-situ pump and valve gland packing, Manufacture of graphite packing rings,Facing material for camprofile type gaskets,Filler for metal jacketed type gaskets.
Also manufacture Crinkled Graphite Tape.

Temperature:-240~400â??(In Oxidizing Media)
-240~800â??(In Non-oxidizing Media)
Pressure:5.0MPa
WhatsApp:86-13566083951
Length/Roll:50M;80M;100M,120M
Width:4.0MM;5.0MM;5.4MM,5.5MM;5.7MM,6.0MM8.0MM,12MM,14MM Thickness:0.4MM;0.5MM;0.7MM,0.8MM

Flexible graphite Roll is made from flake graphite with high carbon content which has the characteristics of high temperature resistance,anti-irradiation,low creep relaxation and good elasticity, it is the basic material for making all kinds of reinforced graphite sheets;graphite tapes;gland packing and sealing gaskets,working temperature -200~650 (in air),-200~3000 ( in non-oxidizing media)
Thickness(mm):0.127-1.6
Width(mm):100-1500(as requested by customers)
Length:100m(as requested by customers)

Flexible graphite sheet is made from flake graphite with high carbon content which is gone through chemical treatment,expanding under high temperature and rolling,it has the characteristics of high temperature resistance,anti-irradiation,low creep relaxation and good elasticity,and it is the basic material for making all kinds of reinforced graphite composite sheets;graphite tapes;gland packing and sealing gaskets.
Whatsapp:86 13566083951
Thickness(mm):0.2-3.0
Width(mm):100-1500(as requested by customers)
Length(mm):100-1500(as requested by customers)

Manufactured from flexible graphite sheet adhesively bonded to a 0.002" (0.05 mm) thick glued SUS304 flat stainless steel sheet insert.
This item is suitable for making:
Flange Seals. Pipeline seals, Valve seals, Exhaust seals, Graphite gaskets, Heat shields And All Seals Gaskets
The dimensions of the standard sheets:
Whatsapp:86 13566083951
Size: 1000X1000mm,1500X1500mm,1000X500mm
Thickness: 1.0mm ~ 4.0mm

Manufactured from flexible graphite sheet adhesively bonded to a 0.002" (0.05 mm) thick glued SUS316 flat stainless steel sheet insert. Recommended to use in pumps, fittings, gas, offshore, waste gas, pipelines.
This item is suitable for making:
Flange Seals. Pipeline seals, Valve seals, Exhaust seals, Graphite gaskets, Heat shields And all Seals Gaskets
The dimensions of the standard sheets:
Whatsapp:86 13566083951
Size: 1000X1000mm,1500X1500mm,1000X500mm
Thickness: 1.0mm ~ 4.0mm

Manufactured from flexible graphite foil mechanically clinched to (0.20mm~0.25mm) thick carbon steel tanged (perforated) metal sheetC 08F tinplate insert. It is best gasket material for cylinder head gasket.
This item is suitable for making:
Engine Seals. Exhaust seals, Graphite gaskets, Seals Gaskets. Cylinder Head Gasket
The dimensions of the standard sheets:
Whatsapp:86 13566083951
Size: 1000X1000mm,1500X1500mm,1000X500mm
Thickness: 1.0mm ~ 4.0mm

Rubber parts
Customized rubber parts can satisfy your unique needs.

Rubber parts
Customized rubber parts can satisfy your unique needs.

Asbestos
Static/dynamic sealing packing at201l1 static/dynamic sealing packing: braided high quality asbestos yarns impregnated with ptfe dispersion, used in pumps and valves for commonly corrosive medium (acid, alkali, oil, steam, ammonia, etc). At201l2 dynamic sealing packing: it append especial lube, is the same with reciprocating pump and rotating in high linear speed.

1volume/polybag

This Graphite Gasket sheet is Manufactured from flexible graphite foil mechanically clinched to a 0.004" (0.1 mm) thick stainless steel tanged (perforated) metal sheet - SUS304 insert. It has good compressibility and resilience, excellent sealing property for microscopic surface irgeularities and long working life.
The dimensions of the standard sheets:Whatsapp:86 13566083951
Size: 1000X1000mm,1500X1500mm,1000X500mm
Thickness: 1.0mm ~ 4.0mm

Manufactured from flexible graphite foil mechanically clinched to a 0.1mm thick stainless steel tanged (perforated) metal sheet - SUS316 insert. It has good compressibility and resilience, excellent sealing property for microscopic surface irrgeularities and long working life.
Whatsapp:86 13566083951
The dimensions of the standard sheets:
Size: 1000*1000mm,1500*1500mm,1000*500mm
Thickness: 1.0mm ~ 4.0mm

High Thermal Conductivity Graphite Sheet Description:
1. Grafoil is Selected from the high purity natural flake graphite.
2. They are made through the advanced chemical treatment and mechanical procedure without fibers, binders or other additives.
3. It offer excellent sealing capabilities under extreme conditions with a longer life and less maintenance.

High Thermal Conductivity Graphite Sheet Application:
1. Made for packing rings and various kinds of gaskets.
2. Cut into strip for filler of spiral wound gasket - Style TA440
3. Used widely in chemical, automotive and pump, valve industries. As a superior replacement for asbe-stos, new more applications are Being identified daily.
4. Temperature: -240~500C under oxidizing environment
-240~3500C under non-oxidizing environment
5. PH Range: 0 - 14

High Thermal Conductivity Graphite Sheet Specification:
Item
Nuclear
grade
Industrial grade
Tolerance of Density g/cm3
±0.05
±0.06
Carbon Content %
99.5
98/99
Tensile strength Mpa
5
4
Compressibility %
30
30
Recovery %
15
15
Sulphur Content %
700
1200
Chlorine Content %
25
50
Stress relaxation rate %
10
10
Lgnition loss %
0.5
2.0

Non-asbestos joint sheet
At1600 series---the products made of asbestos are rejected step-by-step when people demanding more and more on the health and environment-protection.Expandable teflon and flexible graphite are used much more widely than ever in modern industry. Although they are gradually replace the asbestos gasket, they cannot do it completely because they have some defect. So the non-asbestos sheet become the best replacement of asbestos planking. The non-asbestos sheet which is made of aramid fiber, inorganic fiber, synthetic rubber etc under high temperature and high pressure. The nonasbestos material is widely used in the joint part of tubing, valve, heat exchanger, pressure container in refinery, chemical plant, power plant, boatyard, pipework.

1volume/polybag

Ceramic fiber bulk

Product Series:
1050 Ceramic Fiber Blown Bulk HLGX-121
1260 Ceramic Fiber Spun Bulk HLGX-211
1260 Ceramic Fiber Chopped Bulk HLGX-211L
1260 Ceramic Fiber Bulk for Weaving HLGX-211F
High Purity Ceramic Fiber Spun Bulk HLGX-311
High Aluminum Ceramic Fiber Blown Bulk HLGX-421
High Zirconium Ceramic Fiber Spun Bulk HLGX-511

Description
1050 Huolong Ceramic Fiber Blown Bulk was processed by the blown work on the electric melting ore.
1260 Huolong Ceramic Fiber Spun Bulk was processed by the spun work on the electric melting ore.
1260 Huolong Ceramic Fiber Chopped Bulk has been processed by secondary operation on the 1260 Ceramic Fiber which has been eliminated the residue and cut. This Bulk is the perfect material can be used in the wet-formed products to improve the quality.
1260 Huolong Ceramic Fiber Bulk for Weaving has been processed by secondary operation on the 1260 Ceramic Spun Fiber, which has been added lubricant in. The diameter of the Bulk is well proportioned and fiber is long, so it is the preferred materials for the Ceramic Fiber Textiles manufacture.
The High Purity Ceramic Fiber Spun Bulk was processed by the spun work on the melt mixture of the Silicon Dioxide and the Aluminum.
The High Aluminum Ceramic Fiber Blown Bulk was processed by the blown work on the melt mixture of the Silicon Dioxide and the Aluminum.
High Zirconium Ceramic Fiber Spun Bulk was processed by the spun work on the melt mixture of the Zirconium, the Silicon Dioxide and the Aluminum.

Characteristic: Low heat storage and low thermal conductivity Excellent chemical stability Excellent thermal stability, hard to be pulverization in the high temperature circumstance Without any bonding agent and of good resistance to corrosion matter Excellent sound-absorb capability

Technical Index:
Name Ceramic Fiber Blown Bulk Ceramic Fiber Spun Bulk
Classification Temperature 1050 1400 1260 1260 1400
Code HLGX-121 HLGX-421 HLGX-211 HLGX-311 HLGX-511
Diameter(»m) 2f+4 3f+5
Shot Content·+¦¦fª0.25mm·¼(·-)
f_15 f_15
AL2O3·+·-·¼ fª44 52f+55 fª45 fª45 38f+40
ZrO2·+·-·¼ f¼ 15~17
AL2O3·+SiO2·+·-·¼ fª96 fª99 fª97 fª99 f¼
AL2O3·+SiO2·+ZrO2·+·-·¼ f¼ f¼ f¼ f¼ fª99
Fe2O3·+·-·¼ f_1.2 f_0.2 f_1.0 f_0.2 f_0.2
K2O+Na2O·+·-·¼ f_0.5 f_0.2 f_0.5 f_0.2 f_0.2
Package Plastic Bag Inside, Carton Box Outside
Quality Control System ISO9001-2000, ISO14001-1996

Application Materials of the Ceramic Fiber Blanket and Board
Materials of the Ceramic Fiber Textiles
Filling materials of High-temperature Furnace, Heating Equipment and Wall Lines.
Materials of the Ceramic Fiber Wet-formed products
Materials of the Spray, Castable and Coating Mixture.
The insulation filling material of rim angle and complicated interspaces.



Product Series:
1050 Ceramic Fiber Blown Bulk HLGX-121
1260 Ceramic Fiber Spun Bulk HLGX-211
1260 Ceramic Fiber Chopped Bulk HLGX-211L
1260 Ceramic Fiber Bulk for Weaving HLGX-211F
High Purity Ceramic Fiber Spun Bulk HLGX-311
High Aluminum Ceramic Fiber Blown Bulk HLGX-421
High Zirconium Ceramic Fiber Spun Bulk HLGX-511

Description
1050 Huolong Ceramic Fiber Blown Bulk was processed by the blown work on the electric melting ore.
1260 Huolong Ceramic Fiber Spun Bulk was processed by the spun work on the electric melting ore.
1260 Huolong Ceramic Fiber Chopped Bulk has been processed by secondary operation on the 1260 Ceramic Fiber which has been eliminated the residue and cut. This Bulk is the perfect material can be used in the wet-formed products to improve the quality.
1260 Huolong Ceramic Fiber Bulk for Weaving has been processed by secondary operation on the 1260 Ceramic Spun Fiber, which has been added lubricant in. The diameter of the Bulk is well proportioned and fiber is long, so it is the preferred materials for the Ceramic Fiber Textiles manufacture.
The High Purity Ceramic Fiber Spun Bulk was processed by the spun work on the melt mixture of the Silicon Dioxide and the Aluminum.
The High Aluminum Ceramic Fiber Blown Bulk was processed by the blown work on the melt mixture of the Silicon Dioxide and the Aluminum.
High Zirconium Ceramic Fiber Spun Bulk was processed by the spun work on the melt mixture of the Zirconium, the Silicon Dioxide and the Aluminum.

Characteristic: Low heat storage and low thermal conductivity Excellent chemical stability Excellent thermal stability, hard to be pulverization in the high temperature circumstance Without any bonding agent and of good resistance to corrosion matter Excellent sound-absorb capability

Technical Index:
Name Ceramic Fiber Blown Bulk Ceramic Fiber Spun Bulk
Classification Temperature 1050 1400 1260 1260 1400
Code HLGX-121 HLGX-421 HLGX-211 HLGX-311 HLGX-511
Diameter(»m) 2f+4 3f+5
Shot Content·+¦¦fª0.25mm·¼(·-)
f_15 f_15
AL2O3·+·-·¼ fª44 52f+55 fª45 fª45 38f+40
ZrO2·+·-·¼ f¼ 15~17
AL2O3·+SiO2·+·-·¼ fª96 fª99 fª97 fª99 f¼
AL2O3·+SiO2·+ZrO2·+·-·¼ f¼ f¼ f¼ f¼ fª99
Fe2O3·+·-·¼ f_1.2 f_0.2 f_1.0 f_0.2 f_0.2
K2O+Na2O·+·-·¼ f_0.5 f_0.2 f_0.5 f_0.2 f_0.2
Package Plastic Bag Inside, Carton Box Outside
Quality Control System ISO9001-2000, ISO14001-1996

Application Materials of the Ceramic Fiber Blanket and Board
Materials of the Ceramic Fiber Textiles
Filling materials of High-temperature Furnace, Heating Equipment and Wall Lines.
Materials of the Ceramic Fiber Wet-formed products
Materials of the Spray, Castable and Coating Mixture.
The insulation filling material of rim angle and complicated interspaces.

Expanded graphite packing is made by weaving expanded graphite yarns reinforced with cotton yarns through the center. It features excellent self-lubrication and thermal conductivity, with a low coefficient of friction, strong versatility, good flexibility, high strength, and is less likely to wear the shaft. Depending on different working conditions, it can be reinforced with different non-metallic and metallic wires. It is widely used in valves, pumps, expansion joints, mixers, agitators and other equipment in petrochemical, power plants, steel mills and other industries. Application media include hot water, high-temperature and high-pressure steam, heat exchange media, ammonia, hydrogen, organic solvents, hydrocarbons, cryogenic liquids, etc.

Pure Flexible Graphite Packing is made from expanded graphite yarn braided into through all kinds of technology of braiding . They are almost suitable to all media, such as hot water, steam, acids, alkalis, organic solvents,hydrocarbons, low temperature liquids, etc. The sealing cap ability is more better and safety,it is the most effctive composite parts forsolving problems, Pure Flexible Graphite Packing is very popular. 1.Flexible Graphite Packing can be used in valve and some rotary application, high temperature valve and soot blowers. 2.Flexble Graphite Packing is suitable for all application, seals hot water, high temperature and pressure steam, heat transfer fluid , hydrogen gas, ammonia, Solvents. Hydrocarbons, Cryogenic liquids, etc.

Technical parameter
Maximum power(w) 90w
Optimum power voltage(vmp) 18.33v
Optimum operating current(imp) 4.91a
Open circuit voltage(voc) 21.96v
Short circuit current(isc) 4.89a
Mechanical characteristics
Cell type poly-crystalline 156x104mm (6 inch)
No of cell 36 (4x9pcs)
Dimensions 1008x678x35mm
Weight 8.0kgs
Front glass 3.2mm, high transmission, low iron, tempered glass
Junction box ip65 rated
Output cable tuv 1x4.0mm2/ul12awg, length:900mm
Temperature and coefficients
Operating temperature(°c): -40°c ~ + 85°c
Maximum system voltage: 600v(ul)/1000v(iec) dc
Maximum rated current series: 15a
Temperature coefficients of pmax: -0.435%
Temperature coefficients of voc: -0.35%
Temperature coefficients of isc: 0.043%
Nominal operationg cell temperature (noct): 47+/-2°c

Materials of solar panel
1).Solar cell------poly-crystalline solar cell 156*104mm
2).Front glass-------3.2mm, high transmission, low iron, tempered glass
3).Eva-------excellent anti-aging eva
4).Tpt-------tpt hot seal made of flame resistance
5).Frame------anodized aluminum profile
6).Junction box-------ip65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 qc procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both poly-crystalline and mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide