Professional; improving; cooperation; win-win: these are our philosophy. We believe quality is the life of company and honesty is the basic rule of market. We will try our best to offer satisfying service. And welcome your cooperation.
Features:
1.High performance
2.Excellent thermal stability
3.Good stability of the maximum energy product-bh temperature and chemical
4.Strong anti-corrision and oxidation resistance
1.Ngyc has most advanced production and inspection equipment .We are professional smco magnets enterprise which has largest scale and output in china.
2.Our company can produce max. Block 120mm¨¢120mm¨¢100mm with full magnetization.
3.Ngyc can offer batch production for high grade yxg-32 with bhy29mgoe.
4.Ngyc can supply mass of smco magnets with high stable performance and high hk (hky18koe).
5.Ngyc can produce smco magnets through axial with many poles.
6.All series si
This is another type of disc magnets a customer used as a small tool holder. We also have magnets of the same dimension with different grades, N38, N38SH, N40, N45 to meet different holding or pulling force requirement.
Disc magnets are the most common type in our company. You can be assured about their quality. Never will happen such problems like magnetic field missing, magnetism losing or coating peeling. We have never received such a compliant.
If you are looking for this type of magnets, we can offer you 100000 pcs per month.
packed in small boxes and then in standard export cartons with magnetism shielding foils
This block magnet is custom made for one of our customers for use on security products. As you noticed, they are of N52 grade, which means they are very powerful in pull force.
They can also be applied for magnetic linear motor. Basically there are three types of linear motor:
Cylindrical moving-magnet linear motors;
U-channel linear motors and
Flat linear motors.
The linear motor is often described simply as a rotary motor that has been rolled out flat, and the principles of operation are the same. The forcer (rotor) is made up of coils of wires encapsulated in epoxy, and the track is constructed by placing magnets (usually high power magnets) on steel. The forcer of the motor contains the windings, Hall-effect board, thermistor (to monitor temperature) and the electrical connections. By using a linear encoder, position can be quickly and directly measured at the load for increased accuracy of the load position.
packed in small box and then standard export cartons with magnetism shielding foil
941 Metal Metal Products Suppliers
Short on time? Let Metal Metal Products sellers contact you.
This cylinder magnet can be applied for magnetic sensors.
Magnetic cylinder sensors are mainly used to monitor the piston position on cylinders and grippers. The field of the magnet integrated into the piston is detected by the sensor through the actuator wall. Thanks to the contact-free position detection method, magnetic cylinder sensors are reliable and wear-free: no loss of contact material, no impacts, no adhesion, and only one switching point.
Moreover, this cylinder neo magnet can also be applied for magnetic stir bar.
If you are looking for magnetic rod at this size, we won¡¡¥t charge any molding / tooling fees cuz we have had all these necessary molds. Both axially magnetized and diametrically magnetized magnets are available.
Before mass production or purchase order placed, we will mail samples to our customer for their confirmation. Samples usually are free while customers have to pay for the freight.
Usually for small order, our lead time is about 2 weeks. Fast delivery can be ensured.
We have not received any complaint about the quality of our magnets such as magnetic property losing after a period of time or coating peeling and so on..
Packed in small box and then standard export cartons with magnetism shielding foil
Name: neodymium pot magnets
Grade: n42
Size: 11x15.8 mm
Material: sintered neodymium-iron-boron (ndfeb)
Coating/plating: nickel plated . We also can made zn, nicuni, ag, au and other special platings and coatings.
Pot magnets used for magnetic basement that mounted on rotating work light. Pot magnets are often used as tools for various activities in workshops and in industry. They can be used for holding workpieces whilst welding, cutting, milling or drilling etc. Because of the lack of moving parts and the robust construction of pot magnets, the life is unlimited and no maintenance is required. Just keeping the pole surface clean gaurantees relaible operation and a long life
Standard export cartons with magnetism shielding foil
Neodymium iron boron magnets are made from an alloy containing, amongst others, the elements neodymium, iron and boron (ndfeb). The ndfeb magnets are the strongest type of magnet commercially available and are manufactured in a wide range of shapes, sizes and grades. We offer all grades of neodymium iron boron with various types of surface /coating finish for each grade
To offer you our price, please offer the following details :
Magnet grades:n35, n38, n40, n42, n45, n48, n50, n52
N35m , n38m, n40m, n42m, n45m, n48m, n50m
N35h, n38h, n40h, n42h, n45h, n48h, n50h
N35sh, n38sh, n40sh, n42sh, n45sh,
N28uh, n30uh, n33uh, n35uh, n38uh, n40uh, n42uh
N28eh, n30eh, n33eh, n35eh, n38eh, n40eh
N28ah, n30ah, n33ah, n35ah, n38ah.
Magnets size and dimensions
Magnetic direction: which direction to oriented the north pole and south pole
Coating or plating :nickel , zn, black epoxy, ag, au etc.
Quantities: more mass order quantities. More lower the prices. Original factory
Some application : toys, package, printer, switchboard, phone, voice coil motors (vcm's) in hard disk drives, high performance motors, brushless dc motors, magnetic separation, magnetic resonance imaging, sensors, loudspeakers etc.
Our advantages: 1. Original factory with professional technical and servers.
2. Strict quality control systems under certification ts16949 and iso 9001
3. Latest facilities to support r&d, quality control, process control, final product inspection
4. Very low prices due to our production well controlled , process optimization,
5, fast lead time
6. Motto: partnership with all customers
1. Our products have competitve price owing to in ZheJiang, which has rich rare earth raw materials
2. We are a professional rare earth permanent magnet producer. We have rich experiences in NdFeB magnets producing and can produce magnets acccording to your specifications.
3. We have advanced facility and state-of-art fabricating process which assure sintered Ndfeb magnets.
4. We deliver goods in time and have good after-sale service. Committed to customers with our best service and with the most that we can do for you.
5. Sintered neodymium iron boron rare earth magnet is the most powerful, widely used in many industrial areas. If you are interested in our items, please advise us
6. Samples are available, welcome your inquiry.Sinomake Magnet is your reliable partner.
According to the customer requirement to do the packing.
Alnico magnets are manufactured by a cast or sintered process. Production level cast Alnico magnets are produced by conventional foundry methods using resin bonded sand molds. The magnetic characteristics for some exotic grades of Alnico magnets are achieved during the casting operation and are due to the unique crystalline grain orientation developed during the process. Sintered Alnico is a powdered metal and it is manufactured by compacting finely milled Alnico powder in a metallic mold. The resulting geometry is not fully dense and it must be sintered in a furnace to achieve a solid state.
Properties of all anisotropic or oriented cast and sintered Alnico magnet alloys are optimized during a heat treatment process. The direction of orientation is determined in this phase of the manufacturing process which involves heating the alloy above its curie temperature, then cooling at a controlled rate in the presence of a directional magnetic field.
Some cast and sintered Alnico magnets are isotropic or un-oriented and they skip the orientation process. These grades of Alnico magnets usually have lower energy products compared to the anisotropic grades, but they lend themselves to specialized magnetizing.
The surfaces of cast Alnico magnets are usually dark grey, have wide tolerances, and have a rough finish. Critical dimensions are abrasively cut or ground in order to maintain close tolerances and improve the fit and finish. Sintered Alnico magnets usually require minimal grinding because they can be produced with tighter dimensional tolerances. It is usually desirable to have features developed in the casting or sintering operations because conventional machining methods are difficult to employ when fabricating Alnico magnets.
1. SmCo1:5:
SmCo1:5 magnet is also named SmCo5.Prorated with metallic samarium, cobalt and metallic praseodymium , are firstly those roughcasts with different properties and grades after series technology processing from melting, milling, and pressing to sintering in order. The (BH) max range is from 16 to 25, maximum working temperature 250¡ãC. The physical character and ductibility of SmCo5 is better than Sm2Co17, so SmCo5 is slightly easier to be machined thin thickness disc or ring wall and complex shapes while Sm2Co17 is more brittle.
Magnetization magnetic field of SmCo5 is lower than Sm2Co17s. In general, SmCo5 can be magnetized saturated by 4000Gs magnetic field, however, magnetizing Sm2Co17 with high Hcj value need more than 6000Gs magnetic field. These days, prices of rare earth materials improved significantly, and the level of rare earth material around the magnet is up to 40%. For these reasons, the price of SmCo5 is more expensive than Sm2Co17. According to different using circumstance, customer can choose SmCo5 or Sm2Co17 reasonably. If customers need more details about SmCo5, please contact our technical adviser in Service and Support. For more information of SmCo5 grade date, please check the SmCo Magnet Performance Parameter Table. Physical properties please tap Application Technology.
2. 17 SmCo magnet:
SmCo2:17 magnet is also named Sm2Co17. Prorated with metallic samarium, cobalt, Copper, iron and zirconium, are firstly those roughcasts with different properties and grades after series technology processing from melting, milling, pressing to sintering in order. The (BH) max range is from 20 to 32, maximum working temperature 350¡ãC. Sm2Co17 bears a extremely low temperature coefficient and preferably anti-causticity. In high-temperature conditions, the magnetic properties is better than NdFeB magnets, As a result, it¡¯s widely used in fields¡£such as aeronautics and space, national defense and sensors. As a result of great brittleness of Sm2Co17 materials, it is not suitable for complex shapes and thin thickness disc or ring wall.Due to this character, there may be some appearance defects such as small chips during production, inspection and magnetizing process. However, it would not change its property; we consider them as qualified product. Magnetized SmCo products must be picked up carefully and gently during assemble process and kept away from ironware to avoid mutually attracting, causing chips and cracks. Sm2Co17 magnet is not easy to magnetize saturated, therefore, clients must be familiar with magnetization energy of their own magnetization equipments, to the effect that appropriate grade would be chose and products of company can be fully saturated. Please see magnetizing magnetic field of Application Technology for your reference.
The magnetic tools can be used in any concrete formwork applications. We can offer different size and magnetic force of magnetic systems to meet our customers's requirements. The biggest advantage of our product is so light-weight but strong adhesive force, such as the weight of the magnet is only 7.2 kg while the adhesive force could reach about 2000 kgs.
Our design of Precast Concrete Magnet for the precast concrete industry is so compact and light-weight, as a result of the application of the modern neodymium magnetic materials, our shuttering systems offer an excellent magnetic power compared to the minimum weight of the products themselves.
The magnetic tools can be used in any concrete formwork applications. We can offer different size and magnetic force of magnetic systems to meet our customers's requirements. The biggest advantage of our product is so light-weight but strong adhesive force, such as the weight of the magnet is only 7.2 kg while the adhesive force could reach about 2000 kgs.
We specialized in
permanent magnet for over 20 years, All shapes, sizes & materials of magnets. Alnico, neodymium iron boron, samarium cobalt, rare earth, ceramic/ferrite & bonded/flexible are available.
1. Various kind of magnet and magnetic product.
2. Best quality and good price.
3. Short lead time and all-round service.
1. Established in 1994 , we have been in this field of business for more than 10 years, in which time we have gained much valuable manufacturing experience and full-range facilities as well as advanced technology.
2. We are a magnetic material company with integration of processing and marketing, which guarantees high quality, competitive prices and all-round services.
3. Our factory is located in the town of nd fe bí¬í¬ningbo, where the raw material price is low. Meanwhile, adjoining beilun port offers great convenience for transportation.
Magnetic pulley are positioned at the head of belt conveyors to extract metal contamination from the product on the belt. As the roller rotates, it holds the tramp metal while clean product is discharged. Finally as the belt leaves the roller, the magnetism dissipates, and the unwanted contamination falls from under the belt into a separate receptacle. This type of magnet acts as secondary protection for deeply embedded metal in the product, which may have not been initially extracted by an overhead suspension magnet.
Magnetic tubes are a simple low cost form of magnetic separation. Used in a variety of industries from food or plastics processing to chemical and powder processing, according to the environment of your product, these magnetic filter bars can be made with alnico, ceramic or rare earth magnet material. They can be easily installed into machinery or assembled according to the wishes of the customers. Encased in either 304 or 316 stainless steel tubes 25.4mm diameter, we offer them with either standard ferrite magnets or high intensity rare earth magnets (up to 12, 000 gauss). We manufacture them specifically to the length requested by the customer. The sealed stainless steel ends are drilled and tapped for fixing purposes
941 Metal Metal Products Suppliers
Short on time? Let Metal Metal Products sellers contact you.
