Find Verified Electric Components Suppliers, Manufacturers and Wholesalers

* outline dimension 19*15.2*15.5
* 15A switching capability
* submuniature , standard PCB layout
* 1 Form A and 1 Form C configurations
* Plastic sealed and flux proofed types available
* contact arrangement 1H 1Z
* Max. switching current 10A
* Max. switching voltage 277VAC/30CDV
* insulation resistance 100m

* outline dimension 15.7*12.5*14
* 16A switching capability
* Various of motoring positions
* Rotating armature structure
* SPST ( 1 Form A and B) and SPDT configurations
* Dust protected type
* contact arrangement SH
* Max. switching current 2*6

Key Specifications/Special Features
Product Parameters
Model LY1-C40 4P
In 20kA
Imax 40kA
Uc 420V AC
Up

-

Key Specifications/Special Features
Technical data
Type
JLW-180
Current range
5-80A
Time-current characteristic
Definite time
Rated voltage
220VAC,50/60Hz
Measurement error
1%
Protective functions
Overcurrent,locked-rotor,phase loss,
Additional functions
power-on delay,auto reset
Indicators
LED indicating current,operation status
Output contacts
1 C/O
Contact capacity
5A 250VAC
Dimensions (L x W x D)
70Ã?44Ã?98mm
Mounting
screw fixing

-

Product Details
3.1 Key Specifications/Special Features
Function Rated input voltage * Relay output Model
Phase sequence and
phase loss monitoring 3-phase, 3-wire 220 to 440 VAC Relay: 1 NC,1 NO TVR-2000B
3-phase, 3-wire 380 to 660 VAC Relay: 1 NC,1 NO TVR-2000C
* The power supply voltage is the same as the rated input voltage.
Ratings
Rated input voltage 3-phase, 200 to 440 VAC (3-wire)
Input load Approx. 2.6 VA
Operating
time Phase
sequence 1 s±0.05 s
Phase loss 0.1 s max.
(when the voltage changes rapidly from 100% to 0% of rated voltage)
Indicators LED Normal: Green light; phase loss: Red light; Inverted: Yellow light
Output form Relay Output: SPDT contact
Output relay ratings Rated load
Resistive load
5 A at 250 VAC
5 A at 30 VDC
Maximum switching capacity: 1,250 VA, 150 W
Minimum load: 5 VDC, 10 mA (reference values)
Mechanical life: 10 million operations min.
Electrical life:
5 A at 250 VAC or 30 VDC:50,000 operations
3 A at 250 VAC/30 VDC:100,000 operations
Ambient operating
temperature -20 to 60°C (with no condensation or icing)
Storage temperature -25 to 65°C (with no condensation or icing)
Ambient operating
humidity 25% to 85% RH (with no condensation)
Storage humidity 25% to 85% RH (with no condensation)
Altitude 2,000 m max.
Applicable wires Stranded wires, solid wires, or ferrules
Applicable wire size 0.25 to 1.5 mm2 (AWG24 to AWG16)
Wire insertion force 8 N max. for AWG20 wire
Screwdriver
insertion force 15 N max.
Wire stripping length 8 mm
Ferrule length 8 mm
Current capacity 10 A (per pole)
Number of
insertions 50 times
Weight Approx.55g
Mounting Mounts to DIN Track, or screw mounting
Dimensions 30 Ã? 60 Ã?70 mm (WÃ?DÃ?H)
Specifications
Input frequency
range 50 to 60 Hz
Phase loss detection
level 80%±10% of rated input Calculation Formula
= 1 â?? ((Highest phase-to-phase voltage â?? Lowest phase-to-phase voltage)/
Average three-phase phase-to-phase voltage)
Applicable
standards Conforming
standards EN 60947-5-1
Installation environment (pollution level 2, Overvoltage category III)
EMC EN 60947-5-1
Insulation resistance 20 MΩ min.
Between external terminals and case
Between input terminals and output terminals
Dielectric strength 2,000 VAC for one minute
Between external terminals and case
Between input terminals and output terminals
Impulse withstand
voltage 6 kV (between live terminals and exposed, non-charged metal parts)
Vibration resistance Frequency: 10 to 55 Hz, 0.35-mm single amplitude
10 sweeps of 5 min each in X,Y, and Z directions
Shock resistance 100 m/s2, 3 times each in 6 directions along 3 axes
Degree of protection Terminals: IP20

-

Fnad Electrical Appliance Plant, established is located in Ningbo, China. It is 2km away from Geely Automobile Industrial Park. It is a science and technology enterprise integrating with R&D, manufacture, trade and service. The Plant has focused on motor protection for more than years. It is specialized in applications of single-chip microcomputer technology in the fields of industrial control, power electronics and automobile electronics.
Our main products include motor protectors, phase failure protectors, phase sequence protectors, volt-ammeters, surge protector, temperature controllers, etc. we have an in-depth study in prevention of occurrence of phase failure, phase sequence, overload, under-load, overvoltage, under-voltage, three-phase imbalance, over-current and similar abnormalities in customersâ?? equipments and provide such solutions as prevention, alarming and equipment protection. It supports major elevator plants, thermal power plants, automobile plants, crane factories, textile mills, refrigerating plants and chemical plants and provides solutions for them. Some products have passed CE certification and ROSH environmental certification of European Union.

We endeavor to make the company to be listed in Hong Kong in 2020. Welcome to visit and communicate with us.

-

Fnad Electrical Appliance Plant, established is located in Ningbo, China. It is 2km away from Geely Automobile Industrial Park. It is a science and technology enterprise integrating with R&D, manufacture, trade and service. The Plant has focused on motor protection for more than years. It is specialized in applications of single-chip microcomputer technology in the fields of industrial control, power electronics and automobile electronics.
Our main products include motor protectors, phase failure protectors, phase sequence protectors, volt-ammeters, surge protector, temperature controllers, etc. we have an in-depth study in prevention of occurrence of phase failure, phase sequence, overload, under-load, overvoltage, under-voltage, three-phase imbalance, over-current and similar abnormalities in customersâ?? equipments and provide such solutions as prevention, alarming and equipment protection. It supports major elevator plants, thermal power plants, automobile plants, crane factories, textile mills, refrigerating plants and chemical plants and provides solutions for them. Some products have passed CE certification and ROSH environmental certification of European Union.

We endeavor to make the company to be listed in Hong Kong in 2020. Welcome to visit and communicate with us.

-

Key Specifications/Special Features
Ratings
Power supply voltage
Power consumption 24 VAC/DC: 1.8 VA/1 W max.
100 to 240 VAC: 2.5 VA max.
Rated insulation
voltage 600 VAC
Operating value setting
range (SV) 10% to 100% of maximum setting range
Operating value 100% operation at set value
Reset value setting range (HYS) 5% to 50% of operating value
Reset method Note:Manual reset: Turn OFF power supply for
1 s or longer.
Operating time setting
range (T) 3to8 s
Indicators Normal : Green light; Overvoltage Undervoltage : Yellow light
Output form one Normally open and one normally closed
Output relay ratings Rated load
5 A at 250 VAC (Resistive load)
5 A at 30 VDC (Resistive load)
1 A at 250 VAC (Inductive load)
0.2 A at 48 VDC (Inductive load)
Minimum load: 5 VDC, 10 mA (reference values)
Mechanical life: 10 million operations min.
Electrical life: 5 A at 250 VAC or 30 VDC: 50,000
operations
3 A at 250 VAC or 30 VDC:
100,000 operations
Ambient operating
temperature -20 to 60°C (with no condensation or icing)
Storage temperature -25 to 65°C (with no condensation or icing)
Ambient operating
humidity 25% to 85% RH (with no condensation)
Storage humidity 25% to 85% RH (with no condensation)
Altitude 2,000 m max.
Applicable wires Stranded wires, solid wires, or ferrules
Applicable wire size 0.25 to 1.5 mm2(AWG24 to AWG16)
Wire insertion force 8 N max. for AWG20 wire
Screwdriver insertion force 15 N max.
Wire stripping length 8 mm
Ferrule length 8 mm
Current capacity 10 A (per pole)
Weight Approx. 60 g
Mounting Mounts to DIN Track
Dimensions 30 Ã? 60 Ã?76 mm (WÃ?HÃ?D)
Specifications
Conforming
standards EN 60947-5-1
Installation environment (pollution level 2, Overvoltage category III)
Insulation resistance 20 MΩmin.
Between external terminals and case
Between power supply terminals and input terminals
Between power supply terminals and output terminals
Between input terminals and output terminals
Dielectric strength 2,000 VAC for one minute
Between external terminals and case
Between power supply terminals and input terminals
Between power supply terminals and output terminals
Between input terminals and output terminals
Impulse withstand
voltage 6 kV (between live terminals and exposed, non-charged metal parts)
Vibration resistance Frequency: 10 to 55 Hz, 0.35-mm single amplitude
10 sweeps of 5 min each in X,Y, and Z directions
Shock resistance 100 m/s2, 3 times each in 6 directions along 3 axes
Degree of protection Terminals: IP20

-

Key Specifications/Special Features
Technical data
Type DZB
Rated voltage 220VAC,380VAC,50/60HZ
Current range 1-10A,5-50A,10-100A,80-200A200-400A,400-600A,600-800A
Proective functions locked-rotor,overcurrent, undervurrent,phase loss,phase unbalance,overvoltage,undervoltage,
Optional functions RS-485 communication port4-20mA analog output
indicators LED indicating voltage,current,operation status
Output contacts 1C/O for trip1C/O for alert
Contact capacity 3A 380VAC
Dimensions(HÃ?WÃ?Dï¼? 118Ã?54Ã?135mm
Mounting Screw fixing
Features
Integrative structure
Built-in LED and keypad afford a precise,digital setting
Three-phase monitoring of short-circuit, locked-rotor,overcurrent, undervurrent, phase loss, phase unbalance,overvoltage,undervoltage
Earth fault (should couple with ZCT)
Fault recording
RS-485 communication port (optional)
4-20 mA analog output (optional)
2 C/O output contacts, one for trip,one for alert
Protective Functions
Short-circuit
Locked-rotor
Overcurrent
Undercurrent
Phase loss
Phase unbalance
Overvoltage
Undervoltage
Typical Applications
Pumps Fans
Blowers Motors
Compressors
Approvals
CE ROHS

-

Microwave ferrite for isolator
NOTES:
1.MATERIAL: TTVG-1850
2.MATERIAL SHALLBE FREE OF CRACKS AND VOIDS
3.ESL-9912 SILVER OR EQUIVALENT, .0006THK.(ONE SIDE ONLY)
4.MASK BORDER .015 WTH PLATING AROUND EDGESNOT TO EXCEED 5%.

Bwinners Telecom Communication products include: fiber optic cross connection cabinet, fiber optic splice closure, , fiber optical distribution box, Network Cabinet,ODF, fiber terminal box, Fiber Optic Patch Panel, etc.

Light and beautiful plastic structure ,splicing & distribution module for easy operations and convenient installation, Modular structure makes the storage enlarging convenient,30°oblique installation of adapters, preventing eyes from harm of laser and ensuring the fiber bending radius . Many kinds of NTM splicing &distribution marks make the recording conveniently.

External Dimension: 255mm180mm25mm

Material: ABS

Features:

1)12-pair fiber optic connection module
2)Designed for patching and splicing in ODF system
3) Cable storage and splice both in front
4) Longer bending radius for fiberï¼? Easy operation of pigtails

5) Suitable for all kinds of equipment designed according to 19" machine frame standard, and can be easily disposed for particular needs

6) The fusing distribution board of the unit box is double side structure, integrating the fusing and distribution into one unity, suitable for ribbon or non-ribbon optical fiber cable

7) That not only ensures the curvature radius of fiber, but also prevents the eyes from highlight

8) There is a cover-plate on the tray after fusion

Dimension (cm): 49(W)x30.5(L)
Height: 1U, 2U, 3U, 4Uâ?¦.. according to cores
Weight (kg): according to cores.
Capacity: 12 cores, 24 cores, 36 cores, 48 cores.
Draw able trays inside changeable
various panel plates to fit different adapter interface
Standard size, can be used in 19'', 21'' standard distribution frame.

Optical Terminal Box (OTB) is mainly used for connecting the indoor optical cables, optical patch cords and optical pigtails. It can be wall mounted, facilitates the test and refit of the lines.

Four way multi-sockets with earthing contact 16a.250v~, max3500w pp material easy surface mounting with 3g 1.0*1.5m cable with switch

40pcs/ctn, ctn size:50*27*34.5cm, n.W:14kgs, g.W:15kgs

Idc wire gauge: 22-26 awg, solid or stranded
Colour coding: as per 568 a/b standard
Spring wire: phosphor bronze alloy plated with 50 micro-inch of gold over 70-100 micro-inch of nickel
Idc: phosphor bronze alloy with 100 micro-inch 100% nickel plating
Conductor termination: >200
Insulation diameter: 0.7-1.4mm
Flammability rating: ul 94 v-0
Safety rating: ul 1863
Wire: 22-26 awg

Everbright electronics (ningbo) co., ltd. Is a professional manufacturer of electronic metal halid

Ballast, electronic hps ballast, electronic ballast for road lighting and grow light ballast.

1pc/box

10" Krone&110 Dual IDC wall mountable cat6 patch panel

Model: LY-PP6-10

*Specification:

1.12 port, Length:10"
2.Height:1U
3.High reliability and superior performance
4.Meet T568A/B standards.
5.With plastic mount, mounting to the wall. Screws included

*Features:
1.Each port is 100% tested to ensure NEXT and return loss performance
2.individually serialized to support traceability;
3.Utilizes 110 punch down termination on back panel and includes retention cap for each port;
4.Each port contains a universal label that is color coded for T568A and T568B wiring schemes;
5.Terminates 4 pair, 22 - 26 AWG, 100 ohm, solid or stranded twisted pair cable;
6.Optionally mount to standard EIA 10" rack.



Individual package:1pc into polybag, then into white /brown box.
Export carton package: 10pcs/carton, G.W/N.W:14/13kgs,carton size:51.5*29*31.2cm.

Capstan lifting anchor, lifting anchor two head type, eye anchor, utility anchor, edge lift anchor, fitting, lifting socket, cast-in lifting insert, anchor bolt

Electric socket