Find Verified Plasticizers Suppliers, Manufacturers and Wholesalers

1. The tolerance between cutter hub and die plate is compensated automatically due to the universal ball joint.
2.Cutter hub with scale is manually regulated by a hand-wheel .
3.The heating bars are distributed in matrix with special thermic insulant.
4.Plc controller is operated by manual or automatically. Plc program can be modified and memorized.
5.The data about melt temperature & pressure, cutting speed and delay time etc.
Are shown on touch-screen control panel.

Item Unit Parameters
Throughput KG 10~120
Screw diameter mm 0.6~4.0
Blade adjustment Manual
Speed of pellerizer rpm 300~3000
Heating power of die KW 3
Dewaterer speed rpm 1400rpm
Tank heating power KW 5
Circulating water temperature 0C 20~90
Shaker motor power KW 0.2
Dehydration electrical power KW 2.2
Weight KG 150
Dimensions(L*W*H) mm 2200*650*1650.



Per packing list

Item Unit Parameters
Throughput KG 100~600
Screw diameter mm 0.6~4.0
Blade adjustment Manual/hydraulic
Speed of pellerizer rpm 300~3000
Heating power of die KW 6.4
Dewaterer speed rpm 1400rpm
Tank heating power KW 15
Circulating water temperature 0C 20~90
Shaker motor power KW 0.2*2
Dehydration electrical power KW 4
Weight KG 450
Dimensions(L*W*H) mm 4500*1200*1800.



Per packing list

Item Unit Parameters
Throughput KG 600~1600
Screw diameter mm 0.6~4.0
Blade adjustment Manual/hydraulic
Speed of pellerizer rpm 300-3000
Heating power of die KW 8.4
Dewaterer speed rpm 1400rpm
Tank heating power KW 30
Circulating water temperature 0C 20-90
Shaker motor power KW 0.2*2
Dehydration electrical power KW 7.5
Weight KG 650
Dimensions(L*W*H) mm 4500*1500*1800.



Per packing list

Item Unit Parameters
Throughputput KG 1200~3200
Screw diameter mm 0.6~4.0
Blade adjustment Manual/hydraulic
Speed of pellerizer rpm 300-3000
Heating power of die KW Heat conducting oil
Dewaterer speed rpm 1400rpm
Tank heating power KW 40
Circulating water temperature 0C 20-90
Shaker motor power KW 0.4*2
Dehydration electrical power KW 7.5
Weight KG 800
Dimensions(L*W*H) mm 5500*1800*1900.



Per packing list

Applications: This set can be used for extruding thermo-plastics such as soft hard polyvinyl chlorid (PVC) and polystyrene (PE). Coordinated with the appropriate auxil-iary machine, (including the head of former), it can produce many kinds of plastic products such as film pipe, board, braid, belt as well as granule. Features: This set is advanced in design, high in output, good in plasticization and low in energy consumption, The involute gear driving is characterized by low noise, stable working, big bearing capacity and long service life.

Model
Screw Diameter (mm)
L/D
Motor power (kw)

output (kg/h) .

SE-40
ª¦ 40
7-15
11
Manual/Hydraulic
15-40

SE-55
ª¦ 55
7-15
15
Manual/Hydraulic
40-60

SE-65
ª¦ 65
7-15
30
Manual/Hydraulic
50-100 .

SE-90
ª¦ 90
7-15
45
Manual/Hydraulic
250-350 .

SE-100
ª¦ 100
7-15
55
Manual/Hydraulic
350-450 .

SE-120
ª¦ 120
7-15
75 .



Productivity: 50--600kg/h.

Features of the machine
Because of the modular design of scroll and barrel, the model of thread, structure of barrel, draw ratio, feeding and exhaust data, conversion of network, the model of granulation, the electric equipment control mode can all be optimized and adjusted in the light of material system and the technological requirements. It is multifunctional as well as built for a special purpose. The machine is efficient with low specific energy consumption.

The functional characteristics of TE series Bitruder include homoge neity, plastifying dying, fallibility, enhancement recovery and granulation.

The host machine has modular design and the structure of screw and brrel are designed with precision by computer. It has perfect self purification and interchangeability.

With planar triaxial reinforcement design and large safety capacity, new transmission torque dispensing equipment processes gear through high groove gear grinding. All the critical bearing is imported. The lubrication system is under interlock protection. The safe and reliable equipmene can stand wear and tear.

Spiral shell's pole component of host computer connects with core axle and adopts the advanced involute spline to join the form. Change spiral shell pole association at will, in order to meeting different high polymer new material new technological requirements.
The machine possesses various feeding structure and system. In accordance with different states of materials, the client may choose among single-scroll, twin-scrool, hollow spring engagement, nonengagement, forced side feeding and other modes.

Fine vacuum exhaust and take off and wave device is effectively at to volatilize the composition supplies, Moisture and gas through releasing person who congeal the methods of vacuum discharge and shed, raise goods quality.
In accordance with different technological rechirements, water cooing, oil cooling and qir cooling may be utilized.

Various granulating systems, Air-cooling stick-drawing and particlecutting, air-cooling stick-drawing and particlecutting, aircooling rubbed thermal particlecutting, water-ring rubbed thermal particlecutting, off-centered spray thermal particlecutting and under rubbed thermal particlecutting.

model
Screw diameter (mm)
Screw Rotary Speed (rpm)
Motor Power(kw)
L/D
capacity (kg/h).

TE-35 35.6 600 11-15 32-56 30-75
TE-50 51.4 500/600.

1) main material: polycarbonate
2) capacity available: 500ml, 650ml, 700ml, 800ml, 1000ml, 1500ml
3) color: red, green, blue, yellow, grey, violet

PFA translucent customizable cassette
PFA Cassette / Teflon Cassette, able to resist strong acid, strong hydrofluoric acid, strong base and heat up to 200~220 C, use to deliver wafers in acid & base process of Fabrication factory.
These cassettes keep specimens safely submerged in liquid and are resistant to histological solvents.
Low profile design allows the greatest possible wafer exposure to increase cleaning and drying efficiency and enhance stability for horizontal wafer handling.
This product is suitable for cleaning 1 inch, 1.5 inch, 2 inch, 2.5 inch, 3 inch, 4 inch, 5 inch, 6 inch round silicon wafers, glass wafers, ceramic wafers, and 25 25mm, 60 60mm, 103 103mm square silicon wafers, glass wafers, ceramic wafers. It is suitable for school and research institute laboratories.

Imported TEflon flower basket, handle, used for 6 inch semiconductor solar silicon chip carrier, can be used in 250 degrees strong acid and alkali environment, stable performance, preferential price

Plastic pellets extrusion machine
Plastic pellets extrusion machine can used to suit any plastic materials according to variable screw elements combination.
According to different materials, twin screw extruders use different cutting system.
1. Air cooling die face hot cutting system:
PE, HDPE, LDPE, LLDPE, PE+ Caco3/talcum/Tio2, PVC, WPC, CPE, Low smoke zero halogen cable and wire and etc.
2. Water strand cutting system: PP, PE, PS, PA, PC, PET, ABS, HIPS, PPO, POM, color master batch and etc.
3. Water ring cutting system: PP, PE, TPU, TPR, TPE, EVA, color master batch and etc.
4. Fan cooling cutting system: PP+Caco3â?¦
5. Eccentric water-spray cutting system: chemical cross linkingâ?¦.
6. Underwater cutting system: almost all materials, like TPR, TPE, TPV, TPU, EVA, PP, PET, PE, ABS, PLA, EPS,


Twin screw extruder pelletizing line
Plastic pellets extrusion machine