OR-E800W Ride-on Sweeper is the automatic cleaning all-in-one machine integrated with the vacuuming, sweeping and spraying functions. The enlarged wheels offer better trafficability.
Characteristics :
·Designed with enlarged chassis, the sweeping width is 1,860mm, which offers high work efficiency.
·Solid enlarged tire increases the product trafficability.
·Large dust filter can completely clean up the dust; the electric vibrator can automatically clean the filter screen.
·Use of advanced high-performance maintenance-free batteries, featured by no leakage, no harmful gases and optional.
·The machine is featured with advanced cleaning and throwing-off technology, the theoretical value of waste hopper utilization rate is up to 100%.
·High-quality electric control system with overcurrent and undervoltage protection; offers safer and anti-slip slope experience.
·Full LED headlights,high-pressure spray and dust suppression system to avoid secondary dust re-entrainment.
·User-friendly design, the seats can be adjusted to the most comfortable state.Optional PFC charger, optional model free of windshield.
The ride-on floor scrubber V8 is powerful, and capable of cleaning requirements in the industrial environment of heavy oil. Besides, it has enough compactness and flexibility to deal with the large area of cleaning task quickly and effectively. It is mainly used in shopping center, departure hall, factory and logistics warehouse.
Characteristics :
- Automatically plus liquid system can select the most appropriate cleaning efforts under the ground dirty degree.
- Long running time, up to 8 hours.
Industrial structure design strong and dependable.
- One Touch control panel, make the operation more easy.
- Capacity water sensing system fully protect the brush and the suction system.
- Up to 5950m2/h cleaning efficiency, provide efficient and cost-effective cleaning mode to the large ground.
-The low volume and good vision of the work improve the operator's comfort and safety.
Unique features:
1.Whole body alloys line
2.Twin screw extruder + single screw extruder -- much lower cost maintenance (old type is two single screw extruders). Because the modular construction of twin screw extruder.
3.High output.
Specifications
Xps board production line
Excellent insulation
Twin screw extruder
High output
Plastic processed:xps
It is a new model for installation and maintenance of highway anti-collision guardrail post and beam newly developed according to usersf+ needs. (the equipment has obtained the national patent, no.: zl 01 263422.0). The functions of this product are the same as njj series truck-mounted pile drivers. It adopts independent diesel engine as its driving force. The driving speed is 40-60 km/h. The equipment integrates pile driving and pile extracting, with 240fp rotating device. The equipment does not need turn the direction during driving and drawing the guardrail post on both sides. The equipment can operate independently when separated with the chassis, can adjust the hydraulic driving directions. It is equipped with brake device which is safe and reliable in operation.
Main technical specifications
Type of hydraulic hammer Tdb180 Tdb230
Size (lf+wf+h) Mm 4200f+1800 f+2800 4200f+1800 f+2800
Engine power Kw 16.2 20
Radius of gyration Mm 2100 2100
Lateral distance Mm 860 860
Highest working height Mm 4680 4680
Working pressure Mpa 16 16
Pile extracting force Kn 78.4 96.5
Impact frequency Hz 5.8-13 10-15
Working height of hydraulic hammer Mm 700-3000 700-3000
Speed Km/h 40-60 40-60.
It is a new product developed by us. The product claims good mobility, low oil consumption and reliable brake system. The cab can hold 5 persons, with air conditioning device and can carry installing and repairing materials such as guardrail posts and beams of around 2.5 ton. The chassis of the truck mounted pile driver is isuzu brand vehiclef+s chassis. Special mounted equipment is national patented product, the patent no. Is zl 01 263422.0. The special hydraulic equipment has appropriative tools, which can do pile driving and pile extracting for guardrail post easily, with turning around of 240fp, so that it is unnecessary to turn the direction of the truck-mounted pile driver when driving and drawing the posts on both sides. With the characters of easy operation, convenient repairing and good reliability, the product can greatly reduce the working strength, improve the installing and maintenance quality and speed, thus being the best product for installation and maintenance of highway guardrail post and beam. The product has been widely applied to the dozens of highway in the country; all these products are quite welcomed by users.
Main technical specifications
Item Unit Njj5071tqx Njj5072tqx
Type of chassis Nkr77lllwcjay Nkr77lllwcjay
Weight Kg 4300 4350
Max. Weight Kg 6500 6550
Max. Load Kg 2200 2200
Person capacity Person 5 5
Size (lf+wf+h) Mm 6250f+1880f+2850 6250f+1880f+2850
Max. Speed Km/h 95 95
Rated power Kw 96 96
Rotating speed R/min. 2999 2999
Working pressure Mpa 16 16
Pile extracting force Kn 78.4 96.5
Working height of hydraulic hammer Mm 700-3000 700-3000.
The product is mainly applied to repair the crashed and wave shape guardrail beam of highway through 6/7/8/9/10 rollers and accessorial equipment to carry out the reshaping and recovery of guardrail beam of highway, avoid the crook or twist of guardrail beam, thus enabling them to be reused. This is the most perfect equipment in the world with stabilizing performance, easy operation, economical and high efficiency.
Main technical specifications
Rectifying speedtheoretical speed: 3-5m/min.
Roller diameter++80 mm
Roller quantity6/7/8/9/10
Rated power30 kw
Rated revolving speed132-1320 r/min.
G.W.5000 kg
Size of working platform450f+500f+4000 mm
450f+500f+2000 mm
Working circumstanceheight above the sea levelfn1500m
Temperature of circumstance:-20f+f++45f+
Relative humidityfn98%.
*board sheet
The global structure using cold-rolled steel plate with strong security architecture and standard square tube inside. The door is anti-wind, posses the characteristic of high impact resistance.
*surface
The surface of electrostatic spraying process of polyurethane powder coatings. Corrosion-resistant structure design of metal components are used. The paint pieces all using high-performance anti-corrosion primer. The surface of the paint is uniform, smooth. The colour of electroplated layer would not desquamate. Anti-ultraviolet, antitarnish. With strong adhesion ande unease to powdering.
The material of caskets is as follows: 20gauge
Locking mechanism plus a one piece rubber gasket
Continuously welded bottom
Stationary hardware
Adjustable bed and mattress size:l2018*w710*h590, the caskets colors can be changed according to customers requests at randomqty/20 gp: 24pcs qty/40 gp: 48pcs qty/40 hq: 64pcs
Packing:carton
The material of caskets is stainless locking mechanism plus a one piece rubber gasket continuously welded bottom stationary hardware adjustable bed and mattress size:l2018*w710*h590, the caskets colors can be changed according to customers requests at randomíñqty/20 gp: 24pcs qty/40 gp: 48pcs qty/40 hq: 64pcsíñpacking:carton
Product name: microwave digestion tank
Specification: BZH-55ml
Temperature resistance: - 200 +260
Size: total H 203mm, tank H 191mm
Material:
Outer tank:Yuhang fiber composite/Kevlar fiber
Inner tank: body TFM, cover PFA, spring cushion PTFE/TFM
(PFA can also be selected for individual instrument inner tank)
The advantages of the sealed dissolving bomb show
It consumes less acid and solvent, and is specially designed for the geological industry. It has the advantages of practicality, compactness and sealing.
1. Good sealing, the elements are not easy to volatilize;
2. Strong pressure bearing capacity and good permeability resistance;
3. Scientific design, more resistant to deformation;
4. Select high-purity experimental grade TFM (or PTFE), the blank value is lower, and the analysis data is more accurate;
5. Professional manufacturers with 30 years of design and production experience, can customize various sizes and styles (such as double-layer inner cup digestion tanks, Teflon coated digestion tanks, etc.), and the inner cup material can be made of PFA.
Microwave digestion method is applicable to digestion of food, environment, polymer, cosmetics, pharmacy, chemistry, petrochemical and other samples. It has the characteristics of short digestion time, high digestion efficiency, stability and uniformity. It not only saves energy and environmental protection, but also can easily digest various insoluble samples.
Anton parr HVT50 microwave digestion tank characteristicï¼?
1. The inner tank is made of modified polytetrafluoroethylene (TFM);
2. The materials are selected, and no return material is added. The clean processing environment optimizes the processing technology to ensure an extremely low background;
3. TFM is resistant to high and low temperatures - 200~+260 â??, with lower blank value, better deformation resistance, penetration resistance, and stronger recovery under high temperature and high pressure;
4. The experimental data is no less than the original factory, and the cost is low, which greatly reduces the cost of consumables purchased by many scientific research institutions;
5. The production process specially developed by our factory ensures the smoothness of the super long inner tank of special manufacturers (such as CEM in the United States);
6. The inner tank can be used together with the acid flushing electric heating plate of our factory as a special acid flushing device at the later stage of the experiment.
322 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
