13%-15%
Penetration Worked 60
GB/T 269
240-250
Dropping point min
GB/T 4929
135-140
Copper Corrosion
GB/T 7326
pass
Base Fluid Properties
Base Fluid Type
Mineral
Viscosity @40 cst
GB/T 265
185
Viscosity @100 cst
GB/T 265
12
Pour Point
-20
Propertie
Great in anti-water;
Better mechanical invariability;
Better anti-rust;
Good oxidation stability;
Can take place of calcium base and sodium base greases.
This product is made of refined base oil, thickened by fatty acid metallic soap thickener, added with many kinds of additives, for instance, abrasion and extreme pressure resisting, anti-corrosive, antioxidant and rustproof etc.
The dis include: current sensor, voltage sensor, photo gate sensor, light level sensor, force sensor, micro current sensor, motion sensor, temperature sensor, gas pressure sensor, sound sensor, 1394 interface data line, usb date line and dislab software.
Flow-sensors
Flow meter
Flow meter sensor, flow sensors
Product description
Medium flow solution
Food grade material, it can be worked in the water which temperature is 100, c.
Wide operating voltage range
Stable square wave signal
No need external circuit,
No need customer to install magnetic field
General application:
Teaset, supply equipment etc for civil use, and appliance for commercial use.
Feature:
The through type hall effect flo
w sensor ah-001 is based on hall effect element, and it's very simple to use, the output signal is square wave, and it's accurate and relia ble, the customer can use it by connect it as per the operating note, it can be applied in the digital circuit and mcu simply. The food grade material make it can be applied in different occasions, the operating temperature can reach 100, c.
Gear sensor
Gear sensor china, gear sensor manufacturer
Company relies on its advanced technology strength, rich industrial experiences and veracious market visibility, it established abroad strategic cooperation relations with top professional manufacturers of ic designing, manufacturing, package and testing in the united states and taiwan and home, and the company all along exerts the most advanced designing and manufacture technology to ensure the product and technology in the highest flight, and furthest ensure the coherence and reliability and stability of the products.
The products of , nanjing ah electronic science & technology co., ltd , includes ah series unipolar hall switch ic, ah series bipolar hall ic, ah series latch hall switch ic, ah series linear hall ic, wg series zero power consumption magnetic sensor, and all kinds of customized products.
211 Automobile Sensors Suppliers
Short on time? Let Automobile Sensors sellers contact you.
Linear hall sensor ah3509
Hall sensor
Hall switch
features
Rated working voltage 4.5 v ~ 6 v,
Operating temperature range: -40 ~ 125;
Rail to rail voltage output, rated output current : 6 ma
,
Variety of package forms and outer packings for your choice.
No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;
Products meet the eu rohs instruction 2011/65 / eu and reach regulations 1907/2006 / eu requirements
Outline
The sensor will pass linear area /nonlinear area/ saturation area during the magnetic induction increases. When there is no magnetic field that applies in sensor (b=0), when the output voltage of sensor is only half of vcc (vcc/2); when n pole faces mark surface of sensor, and be closed to it gradualy (b-, the output voltage begins to decrease, and the voltage doesnt reduce with the increased magnetic field; when the s pole of magnet faces the mark surface of the sensor and is closed to sensor gradualy b+, the output voltage of sensor begins to increase, and it doesnt increase with the increased magnetic field after it reaches saturation voltage.
Linear hall sensor ah3507
Hall sensor
Hall switch
Features
Rated working voltage 4.5 v ~ 6 v;
Operating temperature range: -40, ~ 125,
Rail to rail voltage output, rated output current : 6 ma;
Variety of package forms and outer packings for your choice;
No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;
Products meet the eu rohs instruction 2011/65 / eu and reach regulations 1907/2006 / eu requirements.
Ah3507 is a kind of analog signal output hall ic, the output voltage changes with the changes of magnetic field. The sensor chip has built-in reverse voltage protection, voltage regulators, temperature compensation circuit, hall-voltage generator, signal amplifier, and other circuit unit etc. Excellent voltage regulator and temperature compensation circuit ensure the sensor stab
le operates ove r a wide vo ltage range and temperature range, and the reverse voltage protection circuit avoids the sensor to be damaged by reverse voltage.
Micropowr hall sensor ah3662
Hall sensor
Hall switch
Features
Micropower designing;
Rated supply voltage , 2.4 v ~ 5.5 v;
Omnipolar operating, no , nor , spole in excitation magnetic field, high magnetic sensitivity, highly symmetry in positive and negative magnetic switch point;
Built-in dynamic imbalance voltage compensition circuit, high temperature stability, small temperature drift in switch point, resistant to mechanical stress and thermal stress, the power consumption is only 8, w when the power supply is 2.75v;
Built-in pull-up resistor;
Products meet the eu
Rohs instruction 2011/65 / eu and reach regulations 1907/2006 / eu requirements.
Outline
Ah3662 is a kind of high sensitivity omnipolar micropower hall sensor. The special designing circuit enable the sensor has omnipolar (no , sor , npole) magnetic field excitation function, excellent positive and negative switch symmetry, and bitty average power consumption current. When the magnet (no , sor , npole) is closed to sensor, , , the sensor outputs low level; when the magnet is far away from sensor the sensor outputs high level.
Linear hall sensor ah3509
Hall sensor
Hall switch
features
Rated working voltage 4.5 v ~ 6 v,
Operating temperature range: -40 ~ 125;
Rail to rail voltage output, rated output current : 6 ma
,
Variety of package forms and outer packings for your choice.
No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;
Products meet the eu rohs instruction 2011/65 / eu and reach regulations 1907/2006 / eu requirements
Outline
The sensor will pass linear area /nonlinear area/ saturation area during the magnetic induction increases. When there is no magnetic field that applies in sensor (b=0), when the output voltage of sensor is only half of vcc (vcc/2); when n pole faces mark surface of sensor, and be closed to it gradualy (b-, the output voltage begins to decrease, and the voltage doesnt reduce with the increased magnetic field; when the s pole of magnet faces the mark surface of the sensor and is closed to sensor gradualy b+, the output voltage of sensor begins to increase, and it doesnt increase with the increased magnetic field after it reaches saturation voltage.
Nominal Current(RMS):200/400/800/1000/1200/2000A
Vout@Ipn:+_4.000V
Measuring Range:0~+_4000A
Supply Voltage DC:+-12-15V
Accurancy@Ipn,+25degree Celsius:less than +_1.0%
Mounting(mm):40.5 in diameter
* Open- loop
* Supply voltage: DC +-12~15V
* Capable measurement of currents: DC, AC,pulse with galvanic isolation between primary circuit and secondary circuit.
Detection range:2m+_10%
Detection target:Opaque object
DEtection range regulation:Fixed
Response frequency:500Hz
All-purpose type ,which can directly substitute the same type of P+F and OMRON
Power supply reversal connection protection ;short-circuit protection ,can directly connect with PLC
* Newly added current over-load protection
Long service life ,high reliability and strong resistance property to environment
Red LED indicates that it's available to detect the sensor operating state
Newly added metal housing to improve the installation intensity
Countermeasure to improve the housing intensity and to solve disconnection
* M8 correlation has been trial-produced and promoted
IP65 protection structure (IEC specification)
Signal-type wiegand sensor wg214
Wiegand sensor
Signal type wiegand sensor supplier
Features
No need the power supply when it works.
Bipolar excitation working mode, the sensor outputs a pair of positive and negative electrical pulse signal when the magnetic field polarity changes for a circle.
Only when the external magnetic field polarity changes, and magnetic strength reaches the excitation threshold, the sensor will outputs a pulse signal, so the vibration won, t happen. The operation is stable and reliable.
The signal amplitude has nothing to do with the magnetic field changing speed, and it can work at the speed near to zero.
The output signal can be remote transmitted by the signal lines, so it, s suitable for lan management.
No mechanic contact, no spark, is a kind of intrinsic safety devices.
Wide operating temperature ran
ge, strong environmental adaptability.
Principle outline
Zero power consumption sensor wg112 ( it also be called wiegand sensor) is a kind of new type magnetic component that is made based on wiegand effect. It can initiative generate energy, no need external power when it works. It can give a sharp voltage pulse signal. The sensor consists of a special processed alloy wire and induction coil which winds on the outside of wire , framework and pins etc.
The alloy wire owns double magnetic structure, its core is soft magnet, and the shell is hard magnet. To utilize the magnetic difference between the alloy wire, s inside and outside, under excitation by suitable strength of alternating magnetic field, the core magnetization direction everted in a moment, the direction became same or opposite with that of shell, and make the magnetic field around alloy wire changed suddenly, then a group of positive and negative pulse generated in the induction coil. The pulse amplitude is only regard with strength of the excitation field, and it has nothing to do with the field changing speed. It realized , zero speed counting detection.
Latch type hall sensor ah4059
Hall sensor
Hall switch
Features
Rated working voltage 4.5 v ~ 24 v, the limit voltages as low as 3.5 v;
Operating temperature range: -55 ~ 150;
 rated output current (sink) : 300 ma, it can directy drive the coils of dc motor (fan ).
Special design make the sensor owns imunity to logic race condition, short switch time and good switch sensitivity.
No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;
Products meet the eu rohs instruction 2011/65 / eu and reach regulations 1907/2006 / eu requirements.
Ah4059 bipolar two ends complementary output switch type hall sensor, when the pole faces the sensors mark surface and is closed to sensor (b?bopoutput terminal vo1 outputs low level, and the output terminal vo2 outputs high level; when the pole
aces senosors mark surface and is closed to sensor , b?brpoutput terminal vo1 outputs high level, the output terminal vo2 output low level. Stable h
Micropower Omnipolar Hall Sensor AH3663
Hall Sensor
Hall Switch
Features
Micropower designing;
Rated supply voltage �2.4 V ~ 5.5 V;
Omnipolar operating, no N or S pole in excitation magnetic field, high magnetic sensitivity, highly symmetry in positive and negative magnetic switch point;
Built-in dynamic imbalance voltage compensition circuit, high temperature stability, Small temperature drift in switch point, resistant to mechanical stress and thermal stress, the power consumption is only 8W when the power supply is 2.75V;
Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements.
211 Automobile Sensors Suppliers
Short on time? Let Automobile Sensors sellers contact you.
