Adjustable Fastening Clamps Metal Clip Fixture for LCD Display Screen Repair Tool. LCD metal clamp fixture for Phone screen displays screen repair.
Features:
Universal metal clip fixture
Adjustable holder to fit most mobile phone and tablets
Used to clamp your repaired device
Help the replaced new screen in its right place,not bulge or sink
Make the screen to joint with the frame perfectly
Light weight and durable
Easy to use and handle
Compatible for Fixing Screen Uplift Cell Phone, ,, Laptops, Tablets, LCD Screen...
Specification:
Material: Metal + Plastic + Rubber
Weight: 45g/piece
Holder width: Max 15mm
Color: Silver + Black
NOTE: Please spin the top gently or you maybe break the display screen.
15 Inch Industrial Touch Screen Monitor
Science fiction has always been a window to a potential future - in the form of technology. But what was once prescribed in Star Trek episodes is rapidly becoming a reality. Many of the fixtures in these shows and books have begun to inspire real-life counterparts, including but not limited to touchscreen technology.
One need only look at how far cell phones have come since their introduction. Physical keyboards, like BlackBerry's, offer as many solutions as possible for those who find themselves able to do more as their devices become more advanced. Where tactile options fell short, touchscreens gracefully stepped up to the plate, offering a more comprehensive experience. This capability then spread to tablets, which many see as a competitor to laptops and even standard PCs.
While there are still things that are best done on a desktop computer, that doesn't change the fact that many users find themselves craving the same features that many mobile devices offer on a PC. This has helped foster a touchscreen display market that offers many viable options for people looking for the best of both worlds. With more computing power and the ability to better control the movements that occur on the screen, users can get more done in exciting new ways.
Traditionally, the computer mouse has allowed us to touch in a virtual environment, but touch screen monitors are changing all that. Arguably, the reason the mouse was used in the first place was because the technology had not yet evolved to a level sensitive enough to enable natural solutions. Now that people have touch screen technology, they want it everywhere.
We print the capacitive touch buttons/sensors on the PET circuit with transparent conductive ink. We also use ITO etching technology to make the capacitive touch buttons/sensors.
Through the customized IC chip to control the touch function wanted. Except for the capacitive touch keypads we also manufacture the capacitive touch sensor circuits.
With capacitive touch technology, the overlay materials can be very diverse and not only limited to PET or PC super thin films. For the normal membrane keypads, the function is triggered by the mechanical buttons(metal domes or Polydome), and also the common membrane keypads only can use PET or PC film for the graphic overlay.
Use a heavy force to press the buttons to make the conductive pads of the Polydome or metal domes connected to the conductive pads on the circuit layer, then become a loop circuit and occur the function. But for the capacitive touch membrane keypads or circuits, it is different.
We use a variety of overlay materials such as thick glass, PMMA, Polycarbonate panels, etc. The material choice is no longer limited to only a very thin film material, on the contrary, the options are not endless.
In addition, the capacitive touch keypad no longer needs heavy force to press buttons, you only need tiny touch the buttons, then the sensor pad can connect the circuit loop and occur the function.
Mericonn upper rolling arm portable BP monitor blood pressure monitor for home use
Name: BP-401
Electronic sphygmomanometer. According to the measured position, it can be subdivided into upper arm type, wrist type, finger type, manual type, automatic type, etc. The utility model has the advantages of simple operation, intuitive reading, automatic measurement by simply opening the switch, and is suitable for home use.
Mericonn Wired bandage type home blood pressure detector for home use
Name: BP-401
Electronic sphygmomanometer. According to the measured position, it can be subdivided into upper arm type, wrist type, finger type, manual type, automatic type, etc. The utility model has the advantages of simple operation, intuitive reading, automatic measurement by simply opening the switch, and is suitable for home use.
M-Triangel CP-150 14inch Vacuum LCD Screen Separator Machine for LCD screen repair. Built in Vacuum Pump 14 inch Phone LCD Screen Separator Machine for iPad Tablet Touch Screen Separating Machine. Available for 110V and 220V.
Features:
Manual LCD remove was applied to separate the broken Touch Screen Glass.
It is easy operated, using time Accurate Temperature Control.
Operation:
Put your LCD with touch screen on the metal plate, LCD side above;
Set the 4 arms to keep the touch screen on the metal plate stably;
Turn on the machine and wait for the metal plate become 80-100 degree (can not beyond 100 degree);
Start to separate the LCD off the glass with a core, then right and left movement with the core in between the LCD and the glass, please notice you must using gentle power and keep the core stay on the LCD surface, so that it will avoid the touch screen be damaged.
DS-868 Intelligent Touch Screen Grinding Machine For Motherboard CPU IC Chips Polishing Phone Face Lattice Repair Grinder,DS-868 Intelligent Touch Screen Grinding Machine for Motherboard CPU IC Chips Grinding.
Features:
DS-868 master precision grinder, Forward, reverse, suspended, stepless speed regulation, accurate display, don't jam the needle, anti-shake.
The extensive function casts the master quality.
Fuselage vent design, fast heat dissipation, lasting work without burning machine.
The 35000 rpm standard is powerful, provides a steady flow of power speed stable low loss noise reduction long service life.
Use a full-screen intelligent LCD touch screen gently adjust at will.
Exclusive power accurate adjustment, easy operation efficiency.
Universal type 3.0mm chuck +(3.0 to 2.35)converter head.
The rear of the handle can be seen when the external shell is taken out, and the medium wire can be released to be broken and replaced.
Package includes:
1 x Grinding Machine
7 x Sanding head
The RT6917GQW electronic component is brought into production by RICHTEK, included in LCD Liquid Crystal Display Modules. Each device is available in a small QFN-48 package and specified over the extended temperature range of -40C to 105C (TA).
TBK 2021 built-in double pump vacuum separator, heating and separating the mobile phone LCD screen frame and OCA glue removal
Detailed Steps:
1. Turn on the power: Plug the power cord into the power connector on the back of the separator, and turn on the power switch.
2. Preset temperature: Press the SET button to preset the temperature, press the up button to set the temperature to about 85 degrees, and press NET to save.
3. Prepare the wire handle: equipped with a wire handle to separate the screen
4. Place the silicone non-slip mat: put it on the panel of the separator, align the rubber mat with the panel holes.
5. Screen separation preparation: Put the screen to be separated in the center of the panel, press the start key to start vacuum adsorption, and ensure that the screen is held.
6. Start cutting the screen: the screen is preheated for 3-5 minutes to start cutting.
7. After removing the bad screen, turn off the power of the separator. If it is dry glue, you can directly tear it off. If the water glue needs to be removed with the help of a blade and a glue removing solution.
Features:
1. Can be used for straight screen or curved screen to remove glue LCD separation maintenance etc.
2. The heating table can rotate 360 degrees, the working temperature is 85â??, the highest temperature is 350â??, and the maximum support is 7 inches.
3. Built-in double vacuum pumps, strong suction, to ensure that the phone is firmly fixed.
4. Thermal insulation non-slip silicone pad, high temperature resistant insulation material ddoes not affect the suction, you can also choose not to use silicone pad
5.The heating platform is protected by a fuse to prevent burnout.
M-Triangel CP-150 14inch Vacuum LCD Screen Separator Machine for LCD screen repair. Built in Vacuum Pump 14 inch Phone LCD Screen Separator Machine for iPad Tablet Touch Screen Separating Machine. Available for 110V and 220V.
Features:
1.Manual LCD remove was applied to separate the broken Touch Screen Glass.
2.It is easy operated, using time Accurate Temperature Control.
1.Put your LCD with touch screen on the metal plate, LCD side above;
2.Set the 4 arms to keep the touch screen on the metal plate stably;
3.Turn on the machine and wait for the metal plate become 80-100 degree (can not beyond 100 degree);
4.Start to separate the LCD off the glass with a core, then right and left movement with the core in between the LCD and the glass, please notice you must using gentle power and keep the core stay on the LCD surface, so that it will avoid the touch screen be damaged.
Our indoor LED display screen is a high definition LED display allowing boundless opportunities to create an unforgettable space. Each frame is manufactured specifically for your installation. Experience true HD quality video with the creative freedom that allows you to define your space.
High Refresh Rate:
Indoor led display screen has a 3840Hz refresh rate
which eliminates scan lines and flicker in your display on camera.
Improved Grayscale:
Indoor led display screen has a 160 horizontal and vertical viewing angle offering increased display coverage in your space with smooth imagery due to increased grayscale capabilities.
Slim & Compact Design:
The indoor led display screen's slimline and lightweight design allows it to be easily packed and stacked.
Multi Pixel Pitches For Options:
Saintway's STW-FS240C makes the traditional fitness products more digitalize, fatigue-free and intelligent. STW-FS240C is configured with RK3399 Hexa-Core/Quad-Core/Dual-Core processors, Curved multi-touch panel, 24 LCD screen, 8.0MP front camera, Bluetooth, Wi-Fi and Ethernet. It has the futuristic design, compact body, built-in intelligence and an easy-to-use interface. While training, users can take online course, attend meetings, watching entertaining videos, listening music, and explore the new ways to get fit. The tech-rich features of this terminal bring the most convenient and joyful experiences while working out with Spinning bikes and Treadmills.
Feature
RK3399 Hexa-Core/Quad-Core/Dual-Core processors.
24'' LCD Curved Screen with Resolution of 1920*1080
Multi touch points G+G touch panel
Front camera: 8.0MP
4GB RAM and 32GB ROM
Built-in stereo 8/5W*2 Speakers (Forward facing)
Bluetooth (optional) 5.0.
Wi-Fi module: 802.11a/b/g/n AC 2x2 MIMO
Ethernet
External memory Support outside enlarge (Maximum 64G)
TBK-208M Professional LCD Repair Machine 3-in-1 Vacuum Separating Laminating and Bubble-Removing Machine to Repare 8.5" LCD Screen, 3 in 1 LCD Screen Vacuum Laminating Machine, Defoaming Bubble remover, LCD Glass Separating MachineM, lamination defoaming separator.
Features:
Fit for the touch screen phones up to 8.5" size.
Automatic Lock cover, do not need to screw any more.
Easy operation, easy to learn the skills, work very fast.
All in 1 machine, save space and no need mold and bubble remover.
Smart Constant Pressure; Automatic Lamination and Debubbling Mode.
1. Monitor the real time connection and disconnection of ESD table mat to ground
2. Monitor the real time connection and disconnection of wrist strap to ground, under the guaranteeof double to ground, the path integrity of ESD to ground is more ensured
3. Monitor has the anti-stupidity function, red LED will flash and comes with audible alarm after power monitor on, plug wrist strap and connect proper ground, green LED will illuminate
4. Plug wrist strap into monitor socket, monitor will alarm when wear wrist strap abnormally
5. Monitor will alarm when wrist strap is in open circuit or poor contact
6. Monitor 2 single wrist straps and 1 table mat simultaneously
7. Accuracy
8. When monitor alarm, red LED light flashes and also comes with buzzer sounds
9. Suitable for any kind of single wrist strap
10. Beautiful appearance, strong anti-interference ability
The 7 inchh HDMI & USB Touch Display (Model No. T070GBP002) is composed of a TFT LCD Display and a PCAP Capacitive Touch Panel and a HDMI USB PCB, which supports 5V power consumption. The model is compatible with different kinds of O.S., such as Raspbian, Windows, Android, Lunux, Arch Linux etc.
The color TFT LCD display is with 1024 600 resolution and standard 50pin LVDSÂ interface, which support sunlight-readable, IPSÂ technology, full viewing, optical bonding/tape bonding.
The touch panel is of a G+G structure capacitive touch panel, which is composed of a cover glass, sensor glass, driver IC and FPC. It is driven by a GOODIX IC Chip GT911, which utilizes an I2C interface and supports 5 points of touch.
The 10.1 inch LCD Touch Display (Model No. WTY101B36A01LM) is of a color tft lcd display panel with 1280×800 resolution and standard 40pin LVDS interface, which support sunlight readable, IPS full viewing, optical bonding/tape bonding.
The touch panel is of a G+G structure capacitive touch panel, which is composed of a cover glass, sensor glass, driver IC and FPC. It is driven by a GOODIX GT9271 IC Chip, which utilizes an I2C interface and supports 10 points touch.
