Find Verified Miscellaneous Suppliers, Manufacturers and Wholesalers

Pummel Test Equipment for Laminated Glass
Pummel Test Device

Application: Pummel test equipment for detect the adhesion of the interlayer of the laminated glass.
Data:
Hammer head diameter: 30mm
Impact Distance: Adjustable
Voltage: 380v
Whole machine voltage: 0.80KW
Test machine size: 1250 mm *1130 mm *870 mm long *wide *high
Control cabinet size: 560mm * 450mm * 1090mm long * wide * high
Knocking frequency: 220 times/min
Maximum sample size: 300 mm x 300 mm
Maximum knock size: 300 mm x 200 mm
Sample applicable thickness: 4mm-6.5mm

Pummel Test device

The test device used a knock test chamber as shown in Figure below and a 454 g flat iron hammer

Pummel Test for Laminated Glass



Sample preparation



According to the normal glazing process, 3 pieces of laminated glass samples of 2mm colorless transparent glass + 0.76mm PVB + 2mm colorless transparent glass were prepared, and the sample size was 300 mm Ã? 76 mm.



Test procedure

The sample was placed in an environment of -18 ° C ± 1 ° C for 2 hours, and immediately taken out and placed in a percussion test chamber for testing. The glass was struck with a hammer from the bottom of the sample until the glass was cut about 200 mm along the length of the sample, as shown in Figure belowã??

Pummel Test for Laminated Glass

After the correct tapping, the original surface of the glass should be broken and broken into small particles. After the crushed sample was placed for 30 min, and the surface of the glass was free of condensed water, the area of the bare film was statistically calculated, and the tapping value of the sample was determined according to Table below.



Determination of the value

Surface area of PVB film exposed after pummelS(%)

Pummel Value

95â?¤Sâ?¤100

0

90â?¤Sï¼?95

1

85â?¤Sï¼?90

2

60â?¤Sï¼?85

3

40â?¤Sï¼?60

4

20â?¤Sï¼?40

5

10â?¤Sï¼?20

6

5â?¤Sï¼?10

7

2â?¤Sï¼?5

8

Sï¼?2

9

Description

Solar photovoltaic cable clip
1, For the photovoltaic system cable wiring provides an excellent solution, so that it neatly arranged in the framework of photovoltaic modules, to ensure the overall appearance of the project and the safety and stability of transmission;

2, The use of compressed structure design, which can clamp the cable specifications: O 5.0- o 7.60mm; can be fixed one or more cable (cable standard configuration 2*4.0mm -, 4*4.0mm -);

3, Suitable for the thickness of the 1.0mm-3.2mm in the scope of the solar frame or holder;

4, Back with barbs designed to prevent the clamp off after installation;

5, The design of the best line to prevent cable insulation damage, convenient installation and disassembly of the clip structure to ensure the efficiency of construction and orderly;

6, Made of high quality stainless steel material SUS304 or 65Mn spring steel, the surface of 65Mn spring steel by quenching after Dacromet, with strong support and stress corrosion resistance of high strength, durable.
Solar photovoltaic cable clip
1, For the photovoltaic system cable wiring provides an excellent solution, so that it neatly arranged in the framework of photovoltaic modules, to ensure the overall appearance of the project and the safety and stability of transmission;

2, The use of compressed structure design, which can clamp the cable specifications: O 5.0- o 7.60mm; can be fixed one or more cable (cable standard configuration 2*4.0mm -, 4*4.0mm -);

3, Suitable for the thickness of the 1.0mm-3.2mm in the scope of the solar frame or holder;

4, Back with barbs designed to prevent the clamp off after installation;

5, The design of the best line to prevent cable insulation damage, convenient installation and disassembly of the clip structure to ensure the efficiency of construction and orderly;

6, Made of high quality stainless steel material SUS304 or 65Mn spring steel, the surface of 65Mn spring steel by quenching after Dacromet, with strong support and stress corrosion resistance of high strength, durable.

Border/coastal ptz electro-optical surveillance system (eoss) JH320-150/75

Jh320150/75 is an intelligent ip network establish a "virtual fence" near the coast/border to detect intruders before they reach. It is equipped with a long range thermal camera
And 60x day light camera to observe intruders and other threats from the sea or border
In total darkness and bad weather. This system is either to be used as independent or
Connecting with radar under "slaving mode", capable of automatically turn to target
Designation area.This system adopts high speed fiber optic data transmission to ensure continuous video record at long range.

Features
Configurable sensor and lens to satisfy various missions
Continuous zoom and adjustable focusing speed is available
High precision turret position, les than 0.1 deg
Simple connection camera system over ethernet
Ip66 protection against dust and water ingress, resist to corrosion, tarnishing, salt fog
Modular design, easy for repair and upgrade

Technical specification
Thermal camera
Detectoruncooled vox fpa
Pixel324256
Spectral band�m
Fov3.1, �12
Ifov0.17~0.83mrad
Netd, ?�50mkf1.0, 300
Day light camera
Focal length12.5~750mm, 60 zoom
Fov0.5, �~28.7, �
F#f3.F22.C
Sensor1/1.8" progressive scan cmos
Video controlagc, awb, support day/night mode switch auto/manual
Resolution1080p, support three bit stream
Turret
Pan range360, �
Tilt range-80, �~+80, �
Pan speed0.1, �~30, �/s
Tilt speed0.1, �~30, �/s
Accelerationmax: 40, �/s2
Protocolpelco-d, pelco-p
Baud rate2400/4800/9600/19200bps
Environmental
Operating temperature-40, �c~+60, �c
Storage temperature-50, �c~+70, �c
Protectionip66
Salt fogph6.5-7.2, 48hours continuous spray
Power
Power supplydc24v
Consumption, ?�180w
Physical
Weight, ?�110kg
Size605mm605mm1160mm (lwh)
Application environmentoutdoor

Radiopaque HDPE material with different color.
Suitable for .035'' or .038'' guide wire passing through.
Very smooth surface and excellent tip configuration.
Sizes: 4Fr to 15Fr.

Jh320-150/75 is an intelligent ip network establishing a virtual fence?? near the coast/border to detect intruders before they reach. It is equipped with a long range thermal camera and 60x day light camera to observe intruders and other threats from the sea or border in total darkness and bad weather. This system is either to be used as independent or connecting with radar under â??slaving mode??, capable of automatically turn to target designation area. This system adopts high-speed fiber optic data transmission to ensure continuous video record at long range.

Features:
Configurable sensor and lens to satisfied various missions.

Continuous zoom and adjustable focusing speed is available.

High precision turret position, less than 0.1,

Support patrol scanning and repeat positioning.

Simple connection against dust and water ingress, resist to corrosion, tarnishing, salt fog.

Modular design, easy for repair and upgrade

Application
Coastal and borden surveillance

Intelligent monitoring

Middle-distance performance

Picture and video recording

Overview:
Gas turbine air intake filter cartridges are modern and reliable for air intake applications. They ensure high efficient filtration of dust and other contaminants even in the most polluted environments. Normally the filters are made of mixture of polyester & cellulose and some time 100% polyester media. These media have much better pleat ability & dimensional stability. Pleated filter media offer high filtration efficiency, very fine retention level, easy clean ability & aesthetically good product than other normal filter media.


Performance descriptions:
Wide pleat spacing, easy-cleaning design
High filtration efficiency
Top open, bottom open/bottom close with deflating bolt hole
Galvanized metal
Rubber seal

Applications:
Widely used in central air conditioning, gas turbine power plants, oxygen plants, steel mill blast oxygen station, furnace blast air station, power plant , gas turbine air intake applications.


Configurations:
Cylindrical
Conical

Selection of materials:
Hv cellulose paper
Cellulose paper
Ptfe membrane polyester

Safe and Natural

Non-animal, bio-fermentation ,sterile HA , no risk of bacterial infection
BDDE cross-linked technology ensures strong stability ,longer lasting of HA fillers
Stabilized pH and osmolarity, close to that of the skin, reduces the risk of oedema and swelling. Excellent biodegradability in the skin
Professional R & D Dep. for innovation product

Affordable price

Produced in our own factory ensures lower price and high quality.
Small quantity is also acceptable

Service

Our Own Brand -Top-Q™
OEM/ODM


Lip Enhancement Long Lasting Hyaluronic Acid Lip Filler BD Syringe Cheek Augmentation
Enhance the shape of nasolabial fold, chin and jawline to look more beautiful!


Filling in wrinkles, fine lines and deep creases
Improving other imperfections like scars
Plumping up cheeks
Contouring the jaw line and other areas of the face

Lip Enhancement Long Lasting Hyaluronic Acid Lip Filler BD Syringe Cheek Augmentation

Adds volumn to thinning lips
Enhance definition of lip edges
Lift the corners of the mouth
Achieve a natural youthful look

Lip Enhancement Long Lasting Hyaluronic Acid Lip Filler BD Syringe Cheek Augmentation

Increase fullness and projection of our breasts
Improve the balance of our figure
Enhance our self-image and self-confidence

Lip Enhancement Long Lasting Hyaluronic Acid Lip Filler BD Syringe Cheek Augmentation

Increase buttocks size
Lift saggy bottom
Boost confidence
Improve skin texture





-

1. Introduction

A fire blanket is a highly flame-resistant blanket that can be used to either extinguish a small fire or to wrap around a person. They are made from 2 layers of woven glass fibre fabric and an inner layer of fire retardant film. They work by cutting off the oxygen supply (oxygen is one of the three elements that a fire needs to burn) and smothering the fire.

2. Fire blanket description

ProductFire blanket
Meterial100% fiberglass fabric, fiberglass thread, fire resistant tabs
Regular size1.0m*1.0m 1.2m*1.2m 1.2*1.5m 1.2m*1.8m 1.8m*1.8m and customized
CertificateTuv/ en1869:1997/ reach/ astm f 1989/ pahs
Temperature Above 550
Thickness0.43mm
Weight430g/m2
Package Soft pvc bag or rigid red pvc box








1.5x1.5m

Semi coke is made from high grade Jurassic coal as a new type of carbon material. Semi coke produced in China, and main production city in Shaanxi China. Semi coke can instead of metallurgical coke to be used in producing ferroalloys products. Semi-coke is light black, characterized by high fixed carbon, high specific resistance, high chemical activity, low ash content, low sulfur and Low phosphorus. It is wildly applied to chemical industry, metallurgic industry, and gas- making industry to produce Ferroalloys, ferrosilicon, Ferronickel ,Ferrochrome, FeMn & SiMn, as well as Calcium carbide and, fertilizer, etc.

F.C.: 84% min
Ash: 8% max
Volatile matter: 8% max
Sulfur: 0.35% max
Moisture: 18% max


Semi coke is made from high grade Jurassic coal and as a new type of carbon material. It can be instead of some metallurgical coke when produce ferroalloys products.
Using semi coke during steel making, blended the semi coke with met coke, which reduced their cost 20% to 30% than using met coke only.

Advantage of semi coke than Met Coke in production of Ferro-alloy smelting as deoxidizer
(1). Semi Coke could improve the quality of the ferro alloy significantly (especially low aluminum alloy Al2O3�¢?�¤0.1%).
(2). Semi Coke could reduce unit electricity consumption significantly (nearly save more than 1000 KWHR, that means 8-10%)
(3). Semi coke could lower the cost of raw material. Although the price of semi coke and coke is similar, but its far cheaper than charcoal and pet-coke
(4). Its very simple to replace coke, pet-coke and charcoal with semi coke. Its no need to upgrade your equipment and the operation is easy and process is simple.

Semi-coke can replace coke (metallurgical coke) and is widely used in chemical industry, smelting, gas production and other industries. It is superior to coke in the production of high energy-consuming products such as silicon metal, ferroalloy, ferrosilicon, silico manganese, fertilizer and calcium carbide.
FC: 84% min
S: 0.35% max
ASH: 8% max
VM: 8% max
Moisture: 15% max
SIZE: 0-6MM, 6-18MM, 18-35MM, 10-30MM, 30-60MM.
For more details please contact Julie

A. Waterproof , light sensitive, adjustable angle,
B. No need for wiring, can be arbitrarily installed;
C. Day / night automatic on / off;
D. High brightness, soft light;
E. Light long time, the utilization of solar energy and battery power supply;
F. We can oem for you if you order more than 500 pieces
G. Replaceable battery, with charing and discharging two-way protection function

Yangtze polycrystalline 100w solar panel is the key component to a system when going off the grid. Solar panel 100w  are relatively compact and are a breeze to set up. Whether you are going camping in the mountains or taking a trip to the beach, this panel can be a great start to your yangtze off-grid system! yangtze poly 100 watt solar panel has several uses including marine, dry camp, and other off-grid applications. Yangtze solar panels also have the capability of withstanding heavy snow and strong wind loads. key features : , off-grid rooftop/ground mounted, residential/rural, rvs, trailers, motorhomes, caravans, boats, etc., 12v / 24v / 48v battery charging (depending on the wiring method), pre-drilled holes on the back of the panel for fast mounting and securing., 10 years workmanship warranty , 25 years 80% output power warranty electrical parameters at stcmodelys100p-36rated maximum power at stc100wmaximum power voltage (vmp)17.8vmaximum power current (imp)5.63aopen circuit voltage (voc)22.4vshort circuit current (isc)6.18apower tolerance 0~+3%mechanical parameters cell type poly-crystalline no.Of cells 36dimension1040x673x30mmweight 9.05kg (approx)glass3.2mm,  high transmission , low iron ,  tempered glassjunction box ip65 & ip67 rated frame anodized aluminum alloyworking conditions maximum system voltage dc 1000v(iec) / 600v(ul)operating temperature -40, , ~+85, , maximum series fuse 15anoct45±2, , application classclass atemperature coefficienttemperature coefficient of pmax-0.41%/, , temperature coefficient of voc-0.31%

PREMIUM Europe Quality 50w SOLAR charging kit monocrystalline panel
Designed in the China. CE, TUV, ISO 9001 quality assurance.
Why Go Solar?
Solar energy is one of the fastest way to let us get power with no pollution and lower cost,Union Solar panels can be used for solar street light,home solar charging kit,garden sunpower light,solar traffic light,solar advertising board,solar toy,Sheds, Stables, Boats, Caravans, Motor-homes, electric fencing, road/ path/ driveway illuminated signage, campsites, yurts, muti-panel off grid power source for small buildings, remote telecommute, mobile food outlets, and many more...

Independent Off-Grid Solar Power Source

One or more solar panels can be connected a battery bank and power inverter using a solar charge controller. You can therefore have a 240v power supply anywhere in the world without grid supply. Please see our solar power

Mono solar panels Technical Specifications

NoType Wp(W)Vmp(V)Im(A)Voc(V)Isc(A)L*W*H(mm)(kg)
1UNM-5A 518.1 0.29 22.2 0.31 186*251*180.6
2UNM-10A 1018.1 0.57 22.2 0.61 354*251*180.99
3UNM-20A 2018.1 1.12 22.2 1.19 435*356*302.2
4UNM-30A 3018.1 1.68 22.2 1.78 650*350*303.1
5UNM-40A 4018.1 2.22 22.2 2.37 800*350*303.4
6UNM-50A 5018.1 2.78 22.2 2.96 530*670*304.2
7UNM-60A 6018.1 3.32 22.2 3.58 650*670*305.1
8UNM-80A 8018.3 4.38 22.4 4.71 780*670*305.9
9UNM-100A 10018.3 5.48 22.4 5.87 1020*670*307.7
10UNM-150A15018.3 8.22 22.4 8.81 1482*670*3511.1

A26 is a multifunctional workstation which employed the most advanced technology to make sure the treatment painless and fast. With particular materials and specific technologies, this workstation can be used safely for years.



Features

1. Equipped with standard hair removal handle and skin rejuvenation handle.

2. Easy for moving and cheap for shipping due to small size.

3. Germany imported xenon lamps ensure the long service life.

4. Self-checking and monitoring system ensures safety.

5. Modularized structure makes maintenance much easier.

6. Spectrum optimization technology makes treatment painless.

7. SHR technology saves treatment time.

Technical Parameter

Model A26
Light Source Pure Sapphire
Wavelength 570-950nm for SR, 650-950nm for HR
Power 110V-220V, 50/60HZ
Spot Size SR: 8*40mm, HR: 15*50mm
Xenon Lamp Germany Imported Lamp
Fluence 1-7J/cm2 for HR, 1-12J/cm2 for SR
Timer 1S,3S&30S for HR, 1S,3S&12S for SR
Frequency 3HZ for HR, 2HZ for SR
Integrated Cooling 1-4 degree
Display 8â?� colorful touch screen
Calibration Automatic Calibrated
Water Cooling Circulated Monitored IN-scene

Our Service
1.Quality warranty for one year.

2.OEM and ODM services are available.

3.Skilled technician to respond any problem within 7 hours.

4.English Catalog and operation video will be sent for helping you know more about our machine. You can get feedback in 8 hours and solved in 24 hours.

Our Company

Company: Zhengzhou Ledy Optical-Electrical Technology Co., Ltd

Objective: All Around Beauty

Business Type: Manufacturing and Trading, established in 2012

Number of Employees: 50 skilled people (10 in R&D; 8 in Sales Department; 3 in After-Sales Department; 15 in Assembling and Producing; 4 in QC; 10 in Financial Department and Logistic Department )

Production Capacity: 300 sets per month

Main Market: USA, Germany, Russia, Italy, Spain, Mexico, India, Poland, Japan, etc.



FAQ
1.Does your machine have great quality and favorable price?
Sure,we offer good quality and cheap price products.

2.How is your service?
We offer professional pre-sales,in-sales and after-sales service for customers.
Any of your tiny need will be satisfied in 24 hours.

3.How about the MOQ?
1 set is ok .

4.What's the warranty of machine?
One year warranty for main machine.

5.When the machine can be shipped?
Within 7 working days after deposit.

Principle

AL-900 is a mature machine in LED series. It has a foldable arm which is convenient to adjust the shape according to the different treatment area. In addition, it has the function for client information management and micro-printing.

Features

1.The treatment head can be exchanged. One unit for multiple treatment head, identify the treatment head automatically.
2. Uploading and saving the program on the machine, so the doctor can design the individuation treatment plan.
3. Flexible arms: it can revolve 360°.
4. The shape of the treatment panel can be adjustable according to the patients demands.suit for any parts of the body treatment like face, back, waist etc.


Technical Parameter
Color Red Blue Infrared
Wavelength 625~630nm 415~420nm 825~830nm
Power Density
(Adjustable) 60~120mW/cm² 60~120mW/cm² 60~120mW/cm²
Treatment time 10~30mins 10~30mins 10~30mins

Our Service
1.Quality warranty for one year.

2.OEM and ODM services are available.

3.Skilled technician to respond any problem within 7 hours.

4.English Catalog and operation video will be sent for helping you know more about our machine. can get feedback in 8 hours and solved in 24 hours.

Our Company
Company: Zhengzhou Ledy Optical-Electrical Technology Co., Ltd

Objective: All Around Beauty

Business Type: Manufacturing and Trading, established in 2012

Number of Employees: 50 skilled people (10 in R&D; 8 in Sales Department; 3 in After-Sales Department; 15 in Assembling and Producing; 4 in QC; 10 in Financial Department and Logistic Department )

Production Capacity: 300 sets per month

Main Market: USA, Germany, Russia, Italy, Spain, Mexico, India, Poland, Japan, etc.



FAQ
1.Does your machine have great quality and favorable price?
Sure,we offer good quality and cheap price products.

2.How is your service?
We offer professional pre-sales,in-sales and after-sales service for customers.
Any of your tiny need will be satisfied in 24 hours.

3.How about the MOQ?
1 set is ok .

4.What's the warranty of machine?
One year warranty for main machine.

5.When the machine can be shipped?
In 7-15 working days after deposit.

Principle

AL-700 is the PDT LED Light therapy machine. Portable model with the small compact size, easy for shipping and moving, the machine is popular in the beauty salon and spa.



Features

1.Portable model, Small size very cheaper for shipping and easy for moving.

2.Long service life by adopting imported SMD LED lamp.

3. Non-invasive and non-ablative treatment, absolutely safe and no side-effect.

4. More than 2,000 lamps ensure the energy and treatment effect.



Technical Parameter
Color Red Blue Infrared
Wavelength 625~630nm 415~420nm 825~830nm
Power Density
(Adjustable) 60~120mW/cm² 60~120mW/cm² 60~120mW/cm²
Treatment Time 10~30mins 10~30mins 10~30mins


Our Service
1.Quality warranty for one year.

2.OEM and ODM services are available.

3.Skilled technician to respond any problem within 7 hours.

4.English Catalog and operation video will be sent for helping you know more about our machine. can get feedback in 8 hours and solved in 24 hours.

FAQ
1.Does your machine have great quality and favorable price?
Sure,we offer good quality and cheap price products.

2.How is your service?
We offer professional pre-sales,in-sales and after-sales service for customers.
Any of your tiny need will be satisfied in 24 hours.

3.How about the MOQ?
1 set is ok .

4.What's the warranty of machine?
One year warranty for main machine.

5.When the machine can be shipped?
Within 7 working days after deposit.

When a baby is stuffed up, the mucus from a baby's nose will affect their ability to breath, eat and sleep. Therefore, a infant aspirator is a baby must have item. The nasal aspirator for sale is compact and easy to carry. You can carry it whenever and wherever. And its detachable design is convenient for cleaning, while the anti-reflux design can prevent the mucus from back into the nose. Besides, this infant nasal aspirator uses high-quality motor to ensure low-voice, so that the baby can enjoy comfortable nasal cleaning experience in quiet environment.

Is nasal aspirator useful?
Nasal Aspirator
First
Nasal congestion in babies can be very stressful for babies, as babies may experience distress and feeding problems from a blocked nose. The impact on daily life can be disturbing, which can affect sleep patterns throughout the family.

Second
Thus nasal aspirator is a must-have device for every family prepared for their baby, which can help you safely and naturally clear out the unwanted fluid and mucous from babys nose.

Third
And its useful for you to use before the baby sleeps. It can help baby clearly breathe, easily feed and restful sleep.

Fourth
Besides, removing the excess fluid and mucus can help baby prevent further diseases, such as coughing, ear infections, and abdominal discomfort. After using, its easy for you to clean.

How does baby nasal aspirator work?

First
Nasal aspirator is an efficient, safe and gentle way to remove the unwanted fluid and mucus from babys nose for clearly breathing, better sleeping and eating.

Second
When the motor provides suction, the tip of the nose enters the child's nose.

Third
These machines usually have a variety of suction settings to suit children of different ages.

Fourth
Usually, we recommend that parents should keep babys body flat, letting her chin tilt up slightly and put a few drops of normal saline in babys each nostril to liquefy secretions, then use the nasal aspirator.

As a professional nasal aspirator supplier, JOYSTAR provides sterilizer and dryer, electric breast milk pump, breast feeding products, newborn nose cleaner, nasal suction, etc. For more, please feel free to contact us!

ice Pack Factory, Ice Brick
Ice Pack Factory, Ice Brick, Bottle Cooler
Ice pack for meleda cooler bag or other cooling bag(pls use 2-3 or more packs according to the cooler box size or items inside)
Breastmilk storage ice pack
Reusable ice pack
Non toxic and food safety
Perfect for moms-on-the-go
Ideal to keep juice/milk/drinks cold for hours
How to use?
Place ice pack in freezer for 5-12 hours prior to use.
Place frozen ice pack on top or at the side of the items in the cooler bag or box.
100g,200g,250g,500g, 1800g models available

SAP frozen cool pack, Breastmilk Storage Ice Pack
Ice pack for meleda cooler bag or other cooling bag(pls use 2-3 or more packs according to the cooler box size or items inside)
Breastmilk storage ice pack
Reusable ice pack
Non toxic and food safety
Perfect for moms-on-the-go
Ideal to keep juice/milk/drinks cold for hours
How to use?
Place ice pack in freezer for 5-12 hours prior to use.
Place frozen ice pack on top or at the side of the items in the cooler bag or box.
100g,200g,250g,500g, 1800g models available

Products name:disposable medical irrigator syringe
Size:push-rod type; balloon type
Product usage:60ml; 80ml
Features:1. With a sterile; non-toxic; no stimulation reaction.
2. The performance good; safe and reliable; simple operation and so on.
Applicable scope:1. Used for nasal feeding dripfeed and milk.
2. Used for washing wound and gynecological vagina flushing.