Addition cure silicon rubber for artificial stone products pplications:
It mainly use for making molds for resin, stone, gypsum and cement product with medium size.
Addition cure silicon rubber for artificial stone products Typical Datasheet :
Item No Color Hardness (A°) Viscosity (CS) Tensile-strength( kgf /cm2 ) Tear-strength (kgf /cm2) Elongation-break(%) Mixing Ratio of silicone and catalyst Application(most for resin, stone, gypsum and cement product to make moulds)
HY-E635 Translucent 35±2 8000±2000 =60 =13 =400 1:1
Addition cure silicon rubber for artificial stone products Points of attention:
1,Prone to poisoning, can not mix with condensation, ionic compounds containing N, S-, P, organic matter and of Sn, As, Hg, Ph., easy molding plastic poisoning, resulting in the phenomenon of not curing.
2,Comparing with Condensation cure silicone, Addition cure silicone's adhesive properties to be worse.
3,Addition cure silicone affect by temperature greatly when cured under room temperature.
4,Addition cure silicone is easy to poisoning, please clean the tools which are used for condensation silicone rubber, so that it can avoid poisoning.
It’s fobidden to add the pigment or powder to addition cure silicone rubber arbitrarily,it’s easy to make the catalyst to be poisoning.
5,Addition cure silicone rubebr has two-component, the component A and component B, please pay attention to clean the component A containers before using for the component B, and vice versa
6,In order to avoid the hardness change, we should mix the component A and component B according to its mixing ratio strictly, no atter it’s 1 : 1 or 10 : 1.
Description
STS2200 insulating glass silicone sealant is a neutral curing silicone sealant with high modulus and high strength, purposely designed for glazing insulating glass. It has the advantage of low air permeability. STS2200 insulating glass silicone sealant works with two-component mixing equipment and the two components react quickly after mingled in scale, then cures to elastomer.
Characteristics
A.STS2200 belongs to rtv-2. It’s curing speed can be adjustable, and the deep-seated curing speed is fast, and it is suitable to be used in the factory;
B. Neutral curing, non-corrosive to metal, coated glass etc.
C. High modulus and high strength;
D. Release low-molecular-weight alcohol and no unpleasant odor during cure;
E. Excellent resistance to weather, uv, ozone, water;
F. Remains flexible over a temperature range of-58°f(-50°c) to302°f(150° c)
G. Good compatibility with other neutral silicone sealants.
Applications
As a secondary edge adhesive sealant in insulating glass units.
Specification :
1.100% food grade silicone material, nontoxic to humans body, with environmental protection
2. Temperature range:-40~260 centigrade
3. Unbreakable, pliable, and not fragile
4. Non-stick finish, durable and easy to clean
5. Suitable for microwave oven and deep-freezer
6. Different style and color available
7. Pattern and logo can be emlbossed, debossed and silk printed on bowl
8. Any color and size available
9. Oem orders are welcomed
10. It is good and necessary part of the household and kitchen
Pm150 has excellent thermal conductivity and electrical insulation performance. Not only satisfy for majority
Electronic products thermal insulation requirements, but also widely used in the thermal requirements that are not too high in electronic products. With the stable heat conduction performance, and the product also has the viscosity, easy to use.
Pm150 is using soft silicone material heat-conducting, stable insulation performance, use in transmission
Interface between the electronic equipment and heat sink, which achieve heat transfer and insulation effect.
Applications:
1.Led lighting, lighting equipment
2.Household appliances lcd display
3.Between semiconductor and heat sink
4.Communication product, smart phone, tablet .
5.Desktop, notebook and other portable computer
6.Large power supply etc.
Performance and characteristics:
1.High thermal conductivity, heat transfer coefficient 1.5w/m-k
2.Stable performance, low thermal resistance, effectively improve the heat transfer speed
3.Low hardness, its viscosity high, easy to use
4.By ul and v-o certification standards
Specification:
Standard size : 200mm*400mm, 300mm*300mm, according to customer needs cutting type.
Basic thickness 0.3mm~15mm, special thickness size can be customized
Its slightly viscous, if need to strengthen the adhesive can be according to customer’s requirement
Product color is mass production color, special color can be adjusted to actual situation .
Pm150 has excellent thermal conductivity and electrical insulation performance. Not only satisfy for majority
Electronic products thermal insulation requirements, but also widely used in the thermal requirements that are not too high in electronic products. With the stable heat conduction performance, and the product also has the viscosity, easy to use.
Pm150 is using soft silicone material heat-conducting, stable insulation performance, use in transmission
Interface between the electronic equipment and heat sink, which achieve heat transfer and insulation effect.
Applications:
1.Led lighting, lighting equipment
2.Household appliances lcd display
3.Between semiconductor and heat sink
4.Communication product, smart phone, tablet .
5.Desktop, notebook and other portable computer
6.Large power supply etc.
Performance and characteristics:
1.High thermal conductivity, heat transfer coefficient 1.5w/m-k
2.Stable performance, low thermal resistance, effectively improve the heat transfer speed
3.Low hardness, its viscosity high, easy to use
4.By ul and v-o certification standards
Specification:
Standard size : 200mm*400mm, 300mm*300mm, according to customer needs cutting type.
Basic thickness 0.3mm~15mm, special thickness size can be customized
Its slightly viscous, if need to strengthen the adhesive can be according to customer’s requirement
Product color is mass production color, special color can be adjusted to actual situation .
SiC Sintered silicon carbide seal ring ( rotary face and stationary ring )
Huihan supplies ceramic seal rings with great mechanical properties which is widely used in pumps, valves, automotive engineering, and medical analysis equipment or even in the fully automatic coffee machines used in homes every day.
My company product silicon metal,The grade include 441.421.551.553.
The packing is 1000kg plastic woven bags.
PORT:QingDao port
Delivery date:shipped in 25days after payment.
Payment:Fob or TT.
Supplier place:AnYang city China.
Wacker 623 similar pad printing silicone is excellent applied for printing pads making of perfect irregular patterns
On plastics toys, on plastics toys, electronic toys, trademarks, keyboards, electroplating products
Etc. Lectronic toys, trademarks, keyboards, electroplating products etc.
Part a : 1kg, 5kg, 10kg, 20kg, 25kg, 200kg, vacuumed packing in white color
Part b: 1kg, 5kg, 10kg, 20kg, 25kg, 200kg, vacuumed packing in sky blue color
Introduction of rtv 2 molding silicone rubber:
1. Two-part of rtv 2 molding silicone rubber: flowable liquid silicon and catalyst.
2. Rtv 2 molding silicone rubber cures at room temperature within 4-6 hours.
Features of rtv 2 molding silicone rubber:
1. Rtv 2 molding siliconerubber has an exceptional fluidity and good operability.
2. Rtv 2 molding silicone rubber hasgood temperature and deformation resistance as well as low shrinkage.
3. Rtv 2 molding siliconerubber has high duplication times.
Operation step for rtv 2 molding silicone rubber:
1. Step one to use rtv 2molding silicone rubber: take 100g of part a and add 2g of part b and mix thesilicon rubber and the curing agent evenly.
2. Step two to use rtv 2molding silicone rubber: vacuum pumping
3. Without exception, thistakes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
4. Step three to use rtv 2molding silicone rubber: brushing cast & perfusion molding operation.
