Find Verified Macadamia Nuts Suppliers, Manufacturers and Wholesalers

MSH Split Case Pump
Size (discharge): 1 inch to 32 inch
Capacity: 3.4~ 15000 m3/hr
Head: 8.6~140m
Efficiency:Up to 92%
Materials:Cast iron,SS 304,SS 316,Bronze etc
MSH Split Case Pump Introduction:
MSH Split Case Pump is Horizontal, Split-casing, and Double-suction centrifugal water pump. Double Volute casing is used to contract the axial force due to high head to extend the serve lift time of bearing. Because of the short distance of two bearing, the shaft is shortened to avoid much vibration.. Closed and Circulated cooling system is applied within the sealing house.The Shaft sleeve and O-ring are used to avoid any connection between the shaft and fluid.

MSH Split Case Pump Features:
Both inlet and outlet of this pump are placed under the axial line,, the pump casing is opened in the middle so it is unnecessary to remove the water inlet and outlet pipelines and motor.if repaired The pump moves CW viewing from the motor side. The pump moving CCW can also be made .

Both pump casing and cover form the working chamber of the impeller and there are threaded holes for mounting vacuum and pressure meters on the flanges ant both inlet and outlet have water draining plug on the lower side of flange

The impeller is static-balance and dynamic balance tested, fixed by the the side nuts and the Shaft sleeve nuts and its axial position can be adjusted via the nuts and axial force will be get balanced by means of the symmetrical arrangement of its blades, there may be residual axial force which is borne by the bearing at the axial end.

This pump shaft is supported by two centripetal ball bearings, which are mounted inside of the bearing chamber on both ends of the pump and lubricated with grease. The double suction seal ring is used to reduce the leakage..

This pump is driven directly via flexible coupling.(V-belt driving will be available if required).

The shaft seal is mechanical seal or packing seal .
MSH Split Case pump Parameter Selection Table:

Pump model Capacity(m3/h) Head(m) Speed(rpm) Power(KW)
MSH150 112--220 35--84 2900 30--55
MSH200 160--351 31--100 2900 37--110
MSH250 324--612 8.6--65.1 1450 22--132
MSH300 504--1663 8.7--140 1450--1470 22--680
MSH350 745--1570 10--125 1450--1470 55--630
MSH400 900--1620 32--85.5 980--1480 440--500
MSH500 1150--3800 10.6--108 740--970 110--800
MSH600 2300--4000 13--80 730--970 145--730
MSH700 2111--4896 39.5--99.5 742--980 397--1252
MSHS800 3960--6878 23--84 600--750 450--1600
MSH1000 6600--9900 32--52 600 1250
MSH1200 5832--14400 6--95.7 500--745 710--3450

MSH Split Case pump On-site Application:
MSH split case pump is suitable for transporting pure water or liquids with physical and chemical properties to water.
Suitable for mine
Suitable for water supply and drainage in factory.
Suitable for power station.
Suitable for urban water supply and drainage
Suitable for flood control.

This is Handan Flower Foodstuff Co., Ltd, a Chinese manufacturer which
supplys 2000 MT dried fruits annually all over the world.

driedfruit.cn

We have dried strawberry, dried apple ring, dried apricot, dried pear,
dried peach, dried mango, dired pineapple, dried haw, dried kiwi,
dried cherry, dried fig, dried papaya, raisin, dried mushroom

Feel free to contact me if you want to purchase/import any of our dried fruits

â?¢ M12 Circular connector according to IEC 61076-2-104

â?¢ M12 circular connector with M12*1.0 screw locking
â?¢ Equivalent to Binder, Phoenix, Lumburger automation...
â?¢ Waterproof rating is IP67/IP68, protected from dust and water during immersion, resistant to many oils and chemical

Generally Description:
Connector Series: M12
Standard: IEC 61076-2-104
Coding: B
Gender:Female
Connector Design: Cable plug
Connector Locking System: Fix screw
Waterproof Rating: IP67/IP68


Normal Temperature: -10â??~+80â??

Material:
Connector Body: TPU
Female Contacts: Phosphorus copper with gold plated
Screw/Nut: Brass with nickel plated
Waterproof 0-ring: FKM


Electrical data:
Contact Resistance: �5mΩ
Insulation Resistance: �100MΩ
Rated Current: 3A~1A
Rated Voltage: 60V~30V

Material:Brass,nickel plated,SS304/316 Claw:PA Sealing and sealing ring:NBR
Approvals:CE
Protection degree:IP68
Temperature Resistance:-40 to 100,short time to 120
Thread length:Standard thread type is used for the equipment which has inner thread or for the thin board.Long thread type is used for the thin board.Long thread type is used for the thick board.
Function:Extremely easy installation,simply insert cable through the assembled gland and tighten gland lock nut until cable is secured.These cable glands are designed to withstand water,dust,salt,acid-base,alcohol,oil and common solvent.
Notes:Customization is available.
The cable accessories for cable glands can also be provided.
M thread cable glands,PG thread cableglands,G thread cable glands,NPT thread cable glands can all be provided.
If needed,we also provide nylon cable glands

Feature of straw briquette molding machine :

This sawdust briquette machine with automatic temperature control system is designed to produce high density wood briquette stick from biomass.
Improved the structure of molding tube, reduced the friction between the mechanical and the raw materials, final increase the density of briquettes .
The newest type wood briquette machine are more stable and durable for working.

Suitable raw material:

Ground nut shell , sugarcane residue, caster shells/stalk saw dust , coffee husk, paddy straw , sunflower stalk, cotton stalks , tobacco waste, mustard stalk, jute waste, bamboo dust , tea waste, wheat straw , palm husk , soybeans husk, rice husks , forestry wastes, wood chips and many other agro wastes.
1. Feeding size of raw material should better be 3-5mm.
2. Moisture better be 8%-12%.

Feature of straw briquette molding machine :

This sawdust briquette machine with automatic temperature control system is designed to produce high density wood briquette stick from biomass.
Improved the structure of molding tube, reduced the friction between the mechanical and the raw materials, final increase the density of briquettes .
The newest type wood briquette machine are more stable and durable for working.

Suitable raw material:

Ground nut shell , sugarcane residue, caster shells/stalk saw dust , coffee husk, paddy straw , sunflower stalk, cotton stalks , tobacco waste, mustard stalk, jute waste, bamboo dust , tea waste, wheat straw , palm husk , soybeans husk, rice husks , forestry wastes, wood chips and many other agro wastes.
1. Feeding size of raw material should better be 3-5mm.
2. Moisture better be 8%-12%.

Product Description:
Abamectin is an effective and broad - spectrum antibiotic and mite - killing agent.It is composed of a group of macrolides, the active material is AVERMECTIN, and has the function of stomach toxicity and palming to mites and insects.The surface of the sprayed leaves can rapidly decompose and dissipate, and the active ingredients which infiltrate into the plant parenchyma can exist in the tissue for a long time and have a conducting effect, and have long residual effect on the insects that are harmful to mite and food intake in the plant tissue.
Product uses:
Uses Control of motile stages of mites, leaf miners, suckers, Colorado beetles, etc. on ornamentals, cotton, citrus fruit, pome fruit, nut crops, vegetables, potatoes, and other crops. Application rates are 5.6 to 28 g/ha for mite control, 11 to 22 g/ha for control of leaf miners. Also used for control of nematodes by seed treatment, and of fire ants.

Silver powder coated french casement extruded aluminum shutter louver
Service
Powder coating: White, black, bronze, grey, green, etc .
Powder coating thickness is more than 60um.
Wood grain: 1. Italian MENPHIS transfer printing paper.
2. AKZO NOBEL INTERPON D1010(10 years warranty): Australia ceder, Bush cherry, Chest nut, Jarrah I, Jarrah II, Western red ceder, etc.
3. AKZO NOBEL INTERPON D34(5 years warranty): Bush wood, Western red, Jarrah, Snow gum, etc.
Electrophoresis: Silver, nickel, golden yellow, black, champagne, etc
Polishing: Silver, nickel, golden yellow, black, etc
Brushing: Silver, nickel, golden yellow, black, bronze, etc
Machining Cutting, punching, drilling, bending, weld, mill, CNC, etc.
OEM customized aluminum profiles are available.