N(SY)-3032 Sulfur-Nitrogen-Phosphorus SPN Additive
Description
N(SY)-3032 is a new ashless lubricating oil additive. In the application of formulating dual-fuel internal combustion engines, it can efficiently substitute for ZDDP series that contain high S and P contents and can not be suitable for dual-fuel internal combustion engine oils. It can provide the oils with excellent anti-wear, anti-oxidation, anti-corrosion performances, and can prevent the oils from high-temperature oxidation and cracking, abrasing, sintering on high-load parts. N(SY)-3032 can also be used in ashless anti-wear hydraulic oil, anti-wear hydraulic oil, guide rail oil, gear oils.
Key performance benefits
1.Ashless
2.Low S, P contents
3.Especially used in dual-fuel internal combustion engine oils and ashless anti-wear hydraulic oils
4.treat rate:0.5%-1.0%
Typical Value
Appearance Light yellow fluid
Chemical Sulfur-Nitrogen-Phosphorus structure
Density(15.6), g/cm 3 0.95
Flash Point(Open Cup) 170
S% 1.2
P% 0.6
N % 0.8
Packing and storage:
Packing: Packed in 200 liter metal drum (net weight:190kg/drum).
Storage: Keep the temperature not higher than 75C. For long-term storage, the suggested temperature is lower than 45C
Description
GALX-202(ZDDP is short for Zinc Butyl Octyl Primary Alkyl Dithiophosphate) is an extremely potent, cost-effective antioxidant and corrosion inhibitor and deemed as essential in todays automotive lubricating oils.GALX-202(ZDDP) could provide the oils with excellent antioxidation, anticorrosion performances and strong extreme pressure, anti-wear abilities. GALX-202(ZDDP) can efficiently prevent the engine bearings from corrosion, and also prevent the viscosity of the oils from increasing due to the high-temperature oxidation. GALX-202(ZDDP) is recommended for use in blending industrial lubricating oils such as gear oils, hydraulic oils, etc. It can be used for blending middle-grade engine oils combined with detergents and dispersants.
Application
Use in industrial lubricating oils including gear oils, hydraulic oils, etc
Use in middle-grade engine oils
Recommended dosage:0.5-3.0%
GALX-154 has the excellent low-temperature dispersity and high-temperature stability. And it can efficiently increase the solubility of the high-temperature ash, it also has good maintaining ability in basicity. When used with metallic detergents, GALX-154 can solve the problem like low-temperature oil sludge of the engines, and can reduce the coatings on the high-temperature part and the carbon deposits. This product is primarily used for blending middle-grade and top-grade internal combustion engine oils, it is usually used in diesel engine oils.
Application
Used for blending top-grade internal combustion engine oils
Used for blending diesel engine oils
Recommended dosage:2.0-4.0%
Description: Diammonium Hydrogen Citrate or
ammonium citrate dibasic
M. F: C6H6O7(NH4)2
F.W: 226.18
CAS:3012-65-5
Appearance:colorless crystalline granular ;freely soluble in water ;
Application:
(1)� mainly used as buffering agent in both ceramic and detergent industry ;
(2)Â As for emulsifier in food industry;
(3)Â for metal surface cleaning in electroplating industry,
(4)Â for preparing anti rust agent in machinery industry and plasticizer;
Packing : 25kg in a kraft bag with inner PE bag;
Shelf life: 2 yrs
12636 Industrial Chemicals Suppliers
Short on time? Let Industrial Chemicals sellers contact you.
Description: Sodium Dihydrogen Citrate/ Monosodium Citrate
M.F:C6H7NaO7
W.F:214.11
CAS:18996-35-5
Grade: Food Grade
Appearance: white powder
Application: it can be used as for buffering agent,chelating agent, acidity agent,detergent additive and plastic foaming agent;
Stand: E331/GB
Packaging Details
25kgs in a kraft bag with P-E inner bag; 1000kgs/Pallet
Description: Magnesium Bisglycinate
M.F:Mg(C2H4NO2)2
M.W.: 172.3
CAS:14783-68-7
Grade: Food & Pharmaceutical
Appearance: White crystal powder;
Application: Magnesium bisglycinate is aminno acid Magnesium nutrient enhancer and can keep the level of required magnesium in the body. And it is often used to restore magnesium of the body in the medical treatment. It is used as the growth agent and high-yield agents of the plant by some countries of U.S.A and EU.
Packing : 25kg in an inner plastic bag covered with a kraft bag
Shelf life: 2 yrs
Description: Magnesium Citrate Anhydrous
M.F:C12H10Mg3O14
W.F:451.3
CAS:3344-18-1 (144-23-0)
Grade: Food Grade
Appearance: White or almost white powder or Granular
Application: used as Magnesium nutrient supplement in food,Beverage, healthy products, pharmaceutical industry
Packing : 25kg in a kraft bag, 1000kgs/Pallet
Shelf life: 2 yrs
Product parameter as below:Â
ITEM USP41 EP8.0
Mg content      % 14.5-16.4 15.0-16.5
PHÂ Â Â Â Â Â Â Â Â Â Â Â / 5.0-9.0 6.0-8.5
Oxalae        ppm / 280
Chloride      %      0.05 /
Sulfate         %  0.2 0.2
Arsenic         ppm 3 /
Calcium        ppm 1 0.2
Iron           ppm 200 100
Heavy metals    ppm 50 10
Loss on drying      % 2 3.5
Description: Magnesium Lactate Dihydrate
M.F:C6H10MgO6. 2H2O
N.W: 238.5
CAS: 18917-93-6
Grade: Food Grade
Appearance: White crystalline powder
Application: As an additive of nutrition health products,mainly used for food,beverage,milchigs and flour ect.
Packing : 25kg in a kraft bag with inner PE- bag
Shelf life: 2 yrs
ITEM EP8.0
Assay % 98-102
Mg % 9.6-10.5
Loss of drying % 14-17
PH 6.5 - 8.5
Chloride ppm 100
Sulfate ppm 50
Iron ppm 4
Heavy metal % 10
Solubility Slightly soluble in water,soluble in boiling water;insoluble in ethanol(96 percent)
Specs1: Ca:30% min Si:58% min Al:1.5% max. C:1.0% max. P:0.04% max. S:0.05% max.
Specs2: Ca:30% min Si:60% min Al:1.5% max. C:1.0% max. P:0.04% max. S:0.05% max.
Size:0-1.6mm/0-2mm/10-50mm 90% min or the size as per customer's requirement
Packing:1mt big bag
Brand FSSF
Product origin China
Delivery time in 5 days
Supply capacity 3000tons/month
Double Fluoride Chemical's ammonium fluorosilicate is mainly used in:
1. Disinfectant in the brewing industry.
2. Corrosive agent for glass,
3. Anti-caries agent for textiles.
4. Wood preservative and also light metal casting,electroplating.
5. Extracting potassium from green sand.
6. Preparaton of artificial cryolite and ammonium chlorate.
7. Also used in chemical analysis to determine strontiun salts.
Molecular Formula: (NH4)2SiF6
Mol. Wt:178
Cas:16919-19-0
UN: 2854
EINECS: 240-968-3
Synonyms:ammonium fluosilicate
Package:
25 kg woven bag with inner plastic bag, or according to customer's requirements
Transportation:Inorganic toxiant.
Description:White crystal or powder.Odorless and tasteless slightly acidic.Hygroscopic.Slightly soluble in water.Solubilityincreases sligntly with increasing temperatare.Insoluble in alcohol.In hot water it will hydrolysis to potassium fluoride.Hydrogen fluoride and silicic acid.Decomposes into potassium fluoride and silicon tetrafluoride when burning.
Brand FSSF
Product origin China
Delivery time in 5 days
Supply capacity 3000tons/month
1.Double Fluoride Chemical CO. produces to many standard grades when applicable, including Mil Spec (military grade)ï¼?Reagent and Technical Grade; Agricultural and Optical Grade.
2.Typical and custom packaging is available.
3.Additional technical, safety (MSDS) information is available.
SODIUM SILICOFLUORIDE CAS NO. : 16893-85-9
Podium Silicofluoride
Molecular Formula: Na2SiF6
Mol. Wt:188.05
Cas:16893-85-9
UN: 2674
EINECS: 240-934-8
Synonyms: Sodium silicofluoride, Sodium fluosilicate, Disodium hexafluosilicate
Package: 25 KG woven bag with inner plastic bag, or according to customer's requirements.
Transportation: It is considered as a dangerous goods, and it is poisonous ,must kept sealed and preserved.
Brand FSSF
Product origin China
Delivery time in 5 days
Supply capacity 3000tons/month
Main usages:
Surface treatment
Electroplating
Industrial Grade Fluotitanic Acid Cas NO 17439-11-1
Brand FSSF
Product origin China
Delivery time in 5 days
Supply capacity 3000tons/month
Main usages:
Surfacetreatment.
Electroplating.
Aluminium lacquering in chrome-free processes.
Molecular Formula: H2ZrF6
Mol. Wt:207
Cas:12021-95-3
UN: 3264
EINECS: 234-666-0
Synonyms:Hexafluorozirconic acid,Fluozirconic Acid,hexafluorozirconate(2-)
Description: Colorless transparent liquid,precipilate crystal of fluorozirconic acid under ordinary temperature,when it concentration is over 42%,Poisonous.
Functional use:In manufacture of optical glass and fluozirconate
Brand: FSSF
Product origin China
Delivery time in 5 days
Supply capacity 3000tons/month
Double Fluoride Chemical's barium fluoride is mainly used in:
Welding flux,optical glass and infrared transmitting film.
Molecular Formula: BaF2
Mol. Wt:175.324
Cas:7787-32-8
UN: 1564
EINECS: 232-108-0
Synonyms: Barium fluoride
Description:White cubic crystal;relative density:4.83. Melting point:1354â??.Soluble in hydrochloric acid.Nitric acid acetic acid and hydrofluoric acid and slightly in water.
Functional use:Welding flux,optical glass and infrared transmitting film.
Package:25 kg woven bag with inner plastic bag, or according to customer's requirements
Brand: FSSF
Product origin China
Delivery time in 5 days
Supply capacity 3000tons/month
Double Fluoride Chemical's patassium fluoride is mainly used in:
1. Glass engraving.
2. Food antiseptic.
3. electroplating.
4. Welding flux.
5. Insecticide
6. Absorbent of fluorating agent (aborbing moisture of hydrofluoric acid )raw,material for potassium bifluoride.
Molecular Formula: KF
Mol. Wt:58.10
Cas:7789-23-3
UN: 1812
EINECS: 232-151-5
Synonyms:Potassium Fluoride
Description:white(cubic)crystal;deliquescent.soluble in hydrofluoric acid and Ammorium and slightly in alcohol.melting point:858â??,keep it sealed.
Functional use: Glass engraving.Food antiseptic.electroplating.Welding flux.insecticide,absorbent of fluorating agent (aborbing moisture of hydrofluoric acid )raw,material for potassium bifluoride.
