The raw material is an odourless, tasteless and non-toxic cellulose ether made from natural polymer cellulose through a series of chemical processing. This product is a white powder with good water solubility.
Product features: white or nearly white with hygroscopicity easy to flow powder, odourless or slightly odourless, insoluble in water, alkali, acid and commonly used organic solvents, has a strong expansion.
Help beer, fruit juice, wine, beverage products, prolong the storage time, improve the taste without affecting the flavour of the beverage. It's a moisturizer for high-end cosmetics. Used in toothpaste to help reduce inflammation and pain.
Description: Colorless or light yellow slightly odoriferous transparent liquid, soluble in water and a variety of other organic solvents, chemically active, easy hydrolysis and polymerization.
Our qualifications are complete, with many international certificates. Good service, you can always keep in touch. With rich experience, our products are exported to more than 100 countries and regions.
Description: Reddish-brown powder, soluble in water and ethanol, insoluble in diethyl ether and chloroform. Stable, no stimulation, to virus, fungi, bacteria, mould and spores, have a strong killing effect.
Our qualifications are complete, with many international certificates. Good service, you can always keep in touch. With rich experience, our products are exported to more than 100 countries and regions.
Description: Yellowish to white powder or aqueous solution, easy to dissolve in water and a variety of organic solvents, with good hygroscopicity, film formation, physiological compatibility. It has the ability to compound with a variety of organic and inorganic compounds. For acid, salt and heat more stable have a wide range of uses.
Our qualifications are complete, with many international certificates. Good service, you can always keep in touch. With rich experience, our products are exported to more than 100 countries and regions.
12626 Industrial Chemicals Suppliers
Short on time? Let Industrial Chemicals sellers contact you.
Trimethylol propane (TMP), white flake crystal. Soluble in water, low carbohydrate alcohol, glycerin,N, N-dimethylformamide, partially soluble in acetone, ethyl acetate, slightly soluble in carbon tetracloride, ether and chloroform.
Identified uses:
1.Used as the raw material of synthetic resin, and also used for synthetic aviation lubricating oil, plasticizer, etc.
2.Used as the glycerine substitute, and also used for synthesis of drying oil.
3.Widely used in the production of polyester and polyurethane foam, also used in the manufacture of alkyd coatings, synthetic lubricants, plasticizer, surfactant, rosin ester and explosives. Also used directly as textile auxiliary agent and PVC resin thermal stabilizer. And used in alkyd resin application, it can improve the resins firmness, color, weather resistance, chemical resistance, and sealing properties.
4.Have the advantages of improving the firmness, corrosion resistance and sealing performance of resin, and have good stability to hydrolysis, pyrolysis and oxidation
Specification
Specification of Analysis Analytical data
APPEARANCE WHITE FLAKE SOLID
TRIMETHYLOLPROPANE(W%) 99.32
WATER(W%) 0.042
ACID VALUE(W%) 0.0003
COLOR 10
Element name In
Atomic weight 114.818
Element type Metal element
Physical traits Indium powder,Indium wire,Indium Ingot,Indium particles,Indium bar
Product purity 4N,5N
Product specifications 150m,75m,45m
Poly Aluminium Chloride (PAC)
PAC Solid
professional polyaluminium chloride manufacturer for drinking water treatment
Cas No.:� 1327-41-9
Molecular formula: [Al2(OH)nCL6-n]mÃ?Â
Appearance: Light Yellow Granule or Powder
Product Description: Poly Aluminium Chloride is an inorganic high-molecular� polymer with gelling� property. It could be used as cementing� material in fireproofing material, Ultrapure alumina products, refractory concrete etc.
Application:Poly Aluminium Chloride is an flocculant mainly used in the purifying of drinking water. It is also used in the special water treatment, such as removal of iron, cadmium, fluorine, radioactive pollutant, oil slick etc. It could also be used in industrial waste water treatment, such as the waste water treatment of dying industry. It is also widely used in the foundry industry, paper making industry, pharmaceutical industry, leather industry etc.
If you have any demand about my products.
please enquiry me sophia at kaihongchem dot com.
Our main products are 2-Ethyl-anthraquinone. Aluminum Chloride.Polyaluminium Chloride PAC. Bronopol. DBNPA. HBCD.Carbohydrazide. SodiumBromide. DBNE DBNPA20%.2,2-Cyanoacetamide. HBCD Masterbatch. BDDP. Sodium bromate. Flake Graphite etc.
2-Ethyl-anthraquinone
2-EAQ
2-Ethyl Anthraquinone
RAW MATERIAL FOR HYDROGEN PEROXIDE
CAS NO.:Â 84-51-5
Appearance: Light Yellow flake solid
Product Description:
Light yellow flake solid,melting point is lower than Anthraquinone, soluble in Benzene, melting point is 108â??
Application: It is mainly used as raw material in the production of Hydrogen Peroxide with Anthraquinone process. It is also used in the synthesis of pharmaceuticals, photochromics, dyes etc.
Packing: 25KG composite kraft paper bag with double lining, 500KG composite jumbo bag or according to customer requirement..
If you have any demand about my products.
please enquiry me sophia at kaihongchem dot com.
Our main products are 2-Ethyl-anthraquinone. Aluminum Chloride.Polyaluminium Chloride PAC. Bronopol. DBNPA. HBCD.Carbohydrazide. SodiumBromide. DBNE DBNPA20%.2,2-Cyanoacetamide. HBCD Masterbatch. BDDP. Sodium bromate Flake Graphite etc.
Hydrogenated bisphenol A (HBPA)
Purity: more than 99.0%
CAS NO 80-04-6
EC NO. 201-244-2
Molecular Formula C15H28O2
Molecular Weight 240.38
Appearance: white solid flakes
Relative Molecular Weight 240.2g/mol
PH:Neutral
Melting Point (C) 168-171 C
Boiling Point (C) 341.2 10.0 C at 760 mmHg
Relative density (water = 1) 1.0 0.1g/cm3
Logarithm of caprylalcohol/ water partition coefficient 3.4 21.5 C
Flash Point (C) 151.7 13.6 C
Water solubility 0.298g/L 25 C
Vapor Pressure 0.0 1.7mmHg at 25 C
Refractive index 1.524
IgnitionTemperature (C): no data is available, the ignition temperature of bisphenol A is 570 C (powder cloud)
Upper explosion limit [% (V / V)]: no data is available
Lower explosion limit [% (V / V)]: no data is available
Solubility: insoluble in water, slightly soluble in carbon tetrachloride, soluble in ethanol.
Phthalic anhydride, 1, 2, 4-phthalic anhydride, also known as partial anhydride. The molecular formula is C9H4O5. Appearance of white sheet, melting point, 164-166. Boiling point 240-245, soluble in hot water and acetone, 2-J ketone, dimethyl formamide, ethyl acetate, cyclohexanone. Soluble in anhydrous ethanol and reaction, slightly soluble in carbon tetracloride, toluene.
Phthalic anhydride used for manufacturing polyester resin and polyimide resin, water-soluble polyester resin, water-soluble polyurethane resin, plasticizer and water-soluble amino alkyd resin, epoxy resin curing agent and advanced aviation lubricating oil, power capacitor impregnation oil, particle binder, sizing agent, smoke reducing agent, instantaneous binder and TOTM, etc.
Trimethylol propane (TMP), white flake crystal. Soluble in water, low carbohydrate alcohol, glycerin,N, N-dimethylformamide, partially soluble in acetone, ethyl acetate, slightly soluble in carbon tetracloride, ether and chloroform. Mainly used in alkyd resin, polyurethane, unsaturated resin, polyester resin, coatings and other fields, can also be used in synthetic aviation lubricating oil, printing ink, etc., can also be used as textile additives and PVC resin heat stabilizer.
Epichlorohydrin is an organic compound with chemical formula C3H5ClO. It is a colorless liquid organic compound with a smell similar to chloroform. It is an important raw material and intermediate in organic synthesis. Can be used in the production of epoxy resin and used as epoxy resin diluent. Also used in the manufacture of glycerin, nitroglycerin explosives, FRP, glycerol methacrylate, chlorol rubber, glycidyl derivatives, surfactants, electrical insulation products, etc. It is also a common raw material for manufacturing a variety of adhesives, pharmaceuticals, pesticides, plasticizers and ion exchange resins and other products. As a solvent for adhesives, coatings, paints, rubber, resins, cellulose esters and cellulose ether, etc.
China Cas NO16872-11-0,Brands Tetrafluoro Boric Acid,Fluoboric Acid Producers
Fluoroboric Acid or Fluoroboric acid Cas NO16872-11-0
Fluoroboric acid
Molecular Formula: HBF4
Mol. Wt: 87.83
Cas:16872-11-0
EINECS:240-898-3
Synonyms:Fluoroboric acid,Four fluorine boric acid,fluoborate salts
Description:Colorless and transparent liquid,highly acidic,capable of being mixed with water and alcohol,hydrolyzed in water and decomposed when heated to 130,toxic and highly corrosive.
Functional use:Preparation of borofluoride,electrolytic industry,stabilizing agent of heavy nitrogen,dissolution of sponge titanium and its alloy.
GALX-OMC-1 Organic Molybdenum Compound
Molybdenum Dialkyl Dithiophosphate/MoDDP/MoDTP
Cas No: 72030-25-2
Description
GALX-OMC-1 is a new technically advanced friction reducer in order to meet the requirements of CF-5 vehicle engine oils that Phosphorus content should be within 0.05%. GALX-OMC-1 could provide the oils with excellent anti-wear, friction-reduction, antioxidation and noncorrosive performances. Organic Molybdenum also has good synergistic effects with other EP antiwear additives. Without Nitrogen element, it could reduce its content in lubricating oils. With the small dosage, GALX-OMC-1 could perform excellent anti-wear and friction-reduction properties. This product could be used in internal combustion engine oils, industrial oils, gear oils and lubricating grease.
Key Performance Benefits
Higher Molybdenum content
Lower Phosphorus content
Excellent friction-reducing property
Good EP/AW and antioxidation performance
Application
Used in internal combustion engine oils, industrial oils, gear oils and lubricating grease.
Its recommended dosage is 0.2-3.0%
Characteristics
Item Typical Value Test Method
Density(20), g/cm3 0.9-1.1 ASTM D1298
Kinematic Viscosity (100C), mm2/s 18-35 ASTM D445
Molybdenum mt% 6.5-10.5 Spectrophotometry
Phosphorus, m% 2min ASTM D1091
Sulfur,m% 6min ASTM D129
Flash Point (COC), C 160min ASTM D92
Foreign Similar Products
Sakuralube 300, MOLYVAN L and RC 3580
Packing: 200 liter metal drum (net weight: 200kg/drum)
Shelf Life: 2 years, stored in dry, clean and well ventilated warehouses, lower than 55C
N(SY)-3032 Sulfur-Nitrogen-Phosphorus SPN Additive
Description
N(SY)-3032 is a new ashless lubricating oil additive. In the application of formulating dual-fuel internal combustion engines, it can efficiently substitute for ZDDP series that contain high S and P contents and can not be suitable for dual-fuel internal combustion engine oils. It can provide the oils with excellent anti-wear, anti-oxidation, anti-corrosion performances, and can prevent the oils from high-temperature oxidation and cracking, abrasing, sintering on high-load parts. N(SY)-3032 can also be used in ashless anti-wear hydraulic oil, anti-wear hydraulic oil, guide rail oil, gear oils.
Key performance benefits
1.Ashless
2.Low S, P contents
3.Especially used in dual-fuel internal combustion engine oils and ashless anti-wear hydraulic oils
4.treat rate:0.5%-1.0%
Typical Value
Appearance Light yellow fluid
Chemical Sulfur-Nitrogen-Phosphorus structure
Density(15.6), g/cm 3 0.95
Flash Point(Open Cup) 170
S% 1.2
P% 0.6
N % 0.8
Packing and storage:
Packing: Packed in 200 liter metal drum (net weight:190kg/drum).
Storage: Keep the temperature not higher than 75C. For long-term storage, the suggested temperature is lower than 45C
Description
GALX-202(ZDDP is short for Zinc Butyl Octyl Primary Alkyl Dithiophosphate) is an extremely potent, cost-effective antioxidant and corrosion inhibitor and deemed as essential in todays automotive lubricating oils.GALX-202(ZDDP) could provide the oils with excellent antioxidation, anticorrosion performances and strong extreme pressure, anti-wear abilities. GALX-202(ZDDP) can efficiently prevent the engine bearings from corrosion, and also prevent the viscosity of the oils from increasing due to the high-temperature oxidation. GALX-202(ZDDP) is recommended for use in blending industrial lubricating oils such as gear oils, hydraulic oils, etc. It can be used for blending middle-grade engine oils combined with detergents and dispersants.
Application
Use in industrial lubricating oils including gear oils, hydraulic oils, etc
Use in middle-grade engine oils
Recommended dosage:0.5-3.0%
