Product Name: N-Cyclohexyl-2-pyrrolidone
Synonyms: 1-cyclohexyl-2-pyrrolidinon;1-cyclohexyl-pyrrolidin-2-one;n-cyclohexyl;n-cyclohexylpyrrolidinone;CHP;Cyclohexyl-2-pyrrolidone;LABOTEST-BB LT00159787;1-CYCLOHEXYL-2-PYRROLIDINONE
CAS: 6837-24-7
MF: C10H17NO
MW: 167.25
EINECS: 229-919-7
Melting point 12 �°C
Boiling point 154 �°C7 mm Hg(lit.)
density 1.007 g/mL at 25 �°C(lit.)
vapor pressure 0.05 mm Hg ( 25 �°C)
refractive index n20/D 1.499(lit.)
Fp >230 �°F
storage temp. Sealed in dry,Room Temperature
pka -0.49�±0.20(Predicted)
form clear liquid
color Colorless to Orange to Green
Water Solubility Soluble
Allantoin is a non-toxic, odorless, non-irritating, non-allergic white crystalline powder, soluble in hot water, hot alcohol and diluted sodium hydroxide solution, slightly soluble in water and alcohol, insoluble in ether and chloroform. An organic solvent; a saturated aqueous solution (concentration of 0.6%) which is slightly acidic.
Allantoin has a physiological function of promoting cell growth, promoting wound healing, softening the stratum corneum protein, and restoring the skin or tissue. It is a good skin wound healing agent and can be used to relieve skin dryness, scaly skin disorders, wounds and ulcers. External skin medication
Allantoin can promote the water absorption capacity of the outermost tissues of skin and hair, prevent the water from dispersing, and make the skin soft, lustrous and elastic, so that the hair does not split or break.
Can be used as a formula cream, lotion, facial cleanser, hair lotion, hair restorer, sunscreen, lipstick, shaving cream, hemorrhoid cream, oral cavity.
Hydroquinone also known as hydroquinone, is a compound formed by replacing two para-hydrogens of benzene with hydroxyl groups. Hydroquinone is white needle crystal, flammable, soluble in hot water, ether and ethanol, slightly soluble in benzene. It has reducibility. After mild oxidation, brown p-benzoquinone (C6H4O2) is obtained, and p-benzoquinone is reduced to obtain hydroquinone. The p-benzoquinone-hydroquinone redox couple exists in many biomolecules, such as coenzyme Q.
Product Name
Diphenylacetonitrile / Benzene-acetonitrile, alpha-phenyl
CAS NO. 86-29-3
Appearance Colorless Liquid
Purity 99%
Density 1.1061
Melting Point 71-73 �°C
Boiling Point 181 �°C/12 mmHg
Flash Point 120 �°C
Refractive Index 1.5850
Vapor Pressure 21.3 hPa (190 �°C)
Acidity Coefficient (pKa) 9.30�±0.10
Application Chemical raw materials;Amines
Usage 1. It can be used as a herbicide, used for turf prevention and control of young grasses before germination, used for synthesizing isocyanates, and further prepared into UV coatings, PU paints, transparent elastomers and adhesives, etc. 2. Used in polyamide and epoxy resin industries Use as an intermediate in organic synthesis. 3. In medicine, it is used to produce gastric amine, phenethylpiperidine, and other drugs such as pain relief.
Storage Keep in dark place,Inert atmosphere
184379 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
This product is white powder or granular, insoluble in water, soluble in hot chlorinated hydrocarbon and aromatic hydrocarbon solvent, non-toxic.
Quality specifications for reference
Saponification value, 87-95
Acid value (mgkoh/g) < 1
Melting point (70-76 �ºC)
Flash point (210 �ºC)
Chroma (MAX) 2
Containing 99%
The product is a colorless and transparent new polymer materials, a variety of different viscosities (5cps ~ 2million cps), the liquid from flowing easily into a thick semi-solid material. This product has a special smoothness, softness, hydrophobicity, good chemical stability, excellent electrical insulation and resistance to high temperature. High flash point, low freezing point, long-term using between -50 �ºC ~ +200 �ºC, low viscosity-temperature coefficient, high compression ratio, low surface tension, water-repellent moisture resistance, low heat conduction coefficient.
Because it has special and excellent physical and chemical function, it can be used in many different industries:
1. Cosmetic industry for skin care cream, bath gel, shampoo and other cosmetic formulations with excellent softness and silky feel.
2. Rubber, plastic, latex, polyurethane, light industry: as a model release agent, brightener agent and release agent of some rubber, plastic, latex, polyurethane products and handicraft production.
3. Machinery, automotive, instrumentation, electronics and other industries used as high-grade lubricants, liquid springs, cutting fluids, buffers oil, transformer oil, high temperature brake fluid, brake fluid, instrumentation damping oil, mold release agents and other modeling framework.
4. Textile, apparel industry as a softener, water repellent, feel modifiers, sewing thread lubrication, chemical fiber spinneret pressure lubrication and clothing lining additives.
5. Add it to other additives in leather and leather chemicals industry, it can be used as softeners, water repellent, feel agents, defoamers, brighteners.
6. Pharmaceutical, food, chemical, paint, building materials industry as defoamers, lubricants, and other weather-resistant paint.
7. Other specific purposes and other new materials.
Carbopol, also called CarbCarbopol, also called Carbomer or Carboxypoly-methylene is a generic name for synthetic high molecular weight polymers used as thickening, dispersing, suspending and emulsifying agents in pharmaceuticals and cosmetics. They may be homopolymers , Carbomers are found in the market as white and fluffy powders. They have the ability to absorb, retain water and swell to many times their original volume. Carbomers codes (910, 934, 940, 941 and 934P) are an indication of molecular weight and the specific components of the polymer .
The primary product of this product is widely used in polyurethane coatings, in addition, it is also used in waterproof materials, sealing materials, pottery materials, etc.;polyurethane foam plastics made of this product are used for warmth (cold), building materials, parts of vehicles and ships ; Refined products can be made into car bumpers, buffers, synthetic leather, non-plastic polyurethane, polyurethane elastic fiber, non-plastic elastic fiber, bo film, adhesive, etc.
Melting point -40 �°C (lit.)
Boiling point 197 �°C (lit.)
density 0.925 g/mL at 25 �°C (lit.)
vapor density 4.1 (vs air)
vapor pressure 0.02 mm Hg ( 20 �°C)
refractive index n20/D 1.427(lit.)
Fp 201 �°F
storage temp. Store below +30�°C.
solubility H2O: 1 M at 20 �°C, clear, colorless
form Slightly Viscous Liquid
pka 15.10�±0.29(Predicted)
color Clear
PH 6-8 (25�ºC, 1M in H2O)
Odor Ammonia-like.
explosive limit 1-9.9%(V)
Water Solubility soluble
2-Methyl-2,4-pentanediol (MPD) is a diol organic compound with a chiral carbon atom. It is a colorless liquid at room temperature and can be Diacetonee alcohol is hydrogenated. The appearance is colorless liquid with mild sweetness. It is miscible with water, soluble in ethanol, and soluble in most organic solvents.
There are three crystal forms of �±, �² and �³. Type �± is a white monoclinic crystal, �² type is a hexagonal crystal, and �³ type is a cubic crystal. Hygroscopic. Lithium sulfate monohydrate crystallized from a concentrated aqueous solution is very stable.
Purpose:
1. Used as raw material for special high-strength glass;
2. Used as analytical reagents and also used in the pharmaceutical industry;
3. Flavoring agent for producing food and synthetic beverages.
Lithium hydroxide can be used as developing agent and lubricating oil for spectral analysis The additive of alkaline battery electrolyte can increase the electric capacity by 12 to 15 and increase the service life by 2 to 3 times
It can be used as an absorbent for carbon dioxide and can purify the air in submarines
The chemical equation is 2LiOHsCO2gLi2CO3sH2Ol
It is used to make lithium salt and lithiumbased grease electrolyte of alkaline battery absorption liquid of lithium bromide refrigerator etc used in petroleum chemical industry light industry nuclear industry etc When used in alkaline batteries the aluminum content is not more than 006 and the lead content is not more than 001 It is used as an analytical reagent a photographic developer and also in the manufacture of lithium it is used as a raw material for the preparation of lithium compounds It can also be used in metallurgy petroleum glass ceramics and other industries
Lithium hydroxide is mainly consumed for the production of lithium greases A popular lithium grease is lithium stearate which is a generalpurpose lubricating grease due to its high resistance to water and usefulness at both high and low temperatures
Carbon dioxide scrubbing
Lithium hydroxide is used in breathing gas purification systems for spacecraft submarines and rebreathers to remove carbon dioxide from exhaled gas by producing lithium carbonate and water
It is used as a heat transfer medium and as a storagebattery electrolyte It is also used in ceramics and some Portland cement formulations Lithium hydroxide isotopically enriched in lithium7 is used to alkalize the reactor coolant in pressurized water reactors for corrosion control
Application
Lithium metasilicate is an inorganic compound that has a high resistance to heat and acid. It is used as an additive to zirconium oxide membranes, which are used in membrane separation processes. It has been shown to have a high transport capacity for water vapor and sodium carbonate. This property makes it suitable for use in the clinical setting where it has been shown to have biological properties and clinical relevance.
(-) -Epigallocatechin Gallate CAS NO. 989-51-5 is white crystal, soluble in organic solvents such as DMSO, derived from tea.
(-) -Epigallocatechin Gallate CAS NO. 989-51-5 is the most effective active ingredient in catechins, accounting for about 8% to 13% of the gross weight of green tea, and (-) -Epigallocatechin Gallate CAS NO. 989-51-5 is also the component with the highest content in catechins.
(-) -Epigallocatechin Gallate CAS NO. 989-51-5The ester formed by benzopyran with gallic acid has phenolic antioxidant properties, and (-) -Epigallocatechin Gallate CAS NO. 989-51-5 molecular structure has six adjacent phenolic hydroxyl groups, thus having many properties superior to other catechins.
The compliant lotion, building materials, electric power metallurgy, oil field chemical engineering, leather, paint coating and spinning prints to dye, the day turn, the antisepsis of cosmetics, deckle, the water transaction etc. realm.
Performance characteristics
1. As a broad-spectrum, long-lasting bactericide to kill many bacteria, fungi and yeasts, the using amount is small.
2. Suitable for use in the medium of the pH value in the range of 2 to 9; free of divalent salt, cross-link no emulsion.
3. Miscible with water; can be added in any production step; easy to use.
4. It has a low toxicity and an appropriate concentration of using, which will lead to no harm completely.
Usage and Cautions
1. In water treatment applications, dilute it into a 1.5% aqueous solution first. Add the solution at a quantity of 80 to 100 ppm for one or two times each week depending on the multiplication of microorganisms like bacteria and algae.
2. Avoid direct eyes' contact with it for a long period. Once the contact happens, rinse eyes with water without delay. No long-term contact with the skin is allowed.
3. Any contact with reducible metals is forbidden during storage, for example, iron and aluminum, so as to avoid decomposition.
4. Not suitable for use in the alkaline medium of pH> 9.0 due to its poor stability. Any combination of this chemical with highly nucleophilic chemicals, like S2- and R-NH2, will lead to declined quality or even complete failure of the product.
CMIT/MIT is a liquid biocide with outstanding advantages such as rapid inhabitation of growth and macromolecule synthesis, broad spectrum activity, effective at low concentration and against biofilm as well as a wide pH range, biodegradable non-persistent in the environment, non-surface activity, infrequent dosing, easily deactivated, compatibility, low toxicity, water soluble, non-foaming, cost effectiveness etc. The active ingredient is a mixture of two isothiazolines. CMIT/MIT is ideally suited to meet the requirement of an industrial water treatment biocide for bacteria, fungi and algae paper mill slimicide.
It is the main industrial sterilization, antiseptic and anti-enzyme agent. It has outstanding inhibition of the growth of molds (fungi, bacteria), algae and other microorganisms in the organic medium, and solves a series of problems such as mold, fermentation, deterioration, demulsification, odor, etc. of organic products caused by the growth of microorganisms. Therefore, developed countries widely use BIT in latex products, water-soluble resins, coatings (latex paint), acrylics, and polymers. Polyamine products, photographic lotion, paper-making, ink, leather, lubricants and other products.
1.Used as an intermediate in organic synthesis. It is liquid, soluble in organic solvent, slightly soluble in water. It is a low toxicity, high efficiency and broad spectrum anti-mildew agent. It has strong killing effect on mold and can achieve ideal anti-mildew effect.
2.It can be widely used in coating, paint, lubricating oil, shoe polish, leather chemistry, wood products and cultural relics protection and many other products.
4-Chloro-3,5-dimethyl is a white crystalline powder. Melting point 115-116 C, boiling point 246 C. At 20 C, 1g can be dissolved in 3L water, 1 part of 95% alcohol, ether, benzene, terpenes, non-volatile oils. It has a slight smell and can volatilize with water vapor. Stable in hot water.
184379 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
