Find Verified Glass Pipes Suppliers, Manufacturers and Wholesalers

High Temperature Pressure Silicone 135 Degrees Elbow Reducer Pipe SAE J20

Construction: Inner:100% High quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow

Construction:
Inner:100% High quality silicone
Cover:silicone
Reinforcement: 4ply Polyester/Ar amid fabric
Color:Black/Red/Blue/Green/Yellow
Application:
Heating and Cooling Systems, CAC Charge-Air-Cooler
(Hot & Cold side) ,Turbo Charger Systems & Custom
Compressor,Inter-cooler or Intake & Inlet Piping for turbo/
Superchargers. etc.

Characteristic:
Good electrical insulating performance
No taste, no toxic, eco-friendly.
High temperature resistance,aging,operative
temperature: - 40 C ~ 220 C
Having physical laziness,Good air permeability
We offer OEM/ODM, We can 3D design, produce
according to your drawings
Temperature: -40 ( -104 ) to +220 (+428 )

Construction: Inner:100% High quality silicone Cover:silicon Reinforce ply: 4 ply Reinforce:Polyester/Ar-amid/Glass fiber Color:Black/Red/Blue/Green/Yellow

SILICONE STRAIGHT COUPLER
Construction
Inner:100% High quality silicone
Cover:silicon
Reinforce ply: 4 ply Reinforce:Polyester/Aramid/Glass fiber
Color:Black/Red/Blue/Green/Yellow
Application: Joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet.Custom compressor, inter-cooler or inlet piping for turbo/supercharged car .Custom cold air intake for non-turbo
car,Custom cold air intake for non-turbo car .These silicone parts can be used in trucks, recreational vehicles, boats, or anything else with an engine
Characteristic:
Good electrical insulating performance
No taste, no toxic, Eco-friendly.
High temperature resistance,aging,operative temperature:- 40 C ~ 220 C
Having physical laziness,Good air permeability

Superior corrosion resistance, Extensive range of chemical resistance, Non-contaminating, smooth surface, Lower sediment accumulation, Not UV resistant, Non-conductive, strong pressure bearing capability, Easily installed with cement or clamp Easy to handle & install

This Crystal clear PVC hose Constructions:

Non-toxic & crystal clear

Heavy wall is kink resistant

Chemical & ozone resistant

Burst pressure is 3 times the working pressure

Self-extinguishing

Temperature: -10 (-50) to 65(+150)

Application:

PVC transparent hose is used for conveying water, oil, gas under normal working condition in factories, farm, ship, building and family.

Characteristics:

Flexible, light, transparent.Food grade, non-toxic, without odor.Anti-erosion and anti-abrasion.Anti-aging,long working life.PVC Clear Heavy Duty General Service Hose is designed for transfer of abrasives, air, food particulates, sanitary products and potable water in applications.This general purpose PVC CLEAR HOSE PIPE TUBE is the industry standard for air and water applications. HOSE is clear, so you can easily monitor flow. It is flexible to easily bend around objects.This PVC clear hose is more economical.

Clear PVC Hose pipe provides a versatile, cost-effective alternative for many hose piping applications, particularly those where visual monitoring is critical. The benefits of transparent plastics are well recognized. Clear PVC Hose pipe has exceptional corrosion resistance; smooth interior walls for unimpeded flow and reduced sediment buildup; non-contaminating for purity applications; fast, reliable solvent-welded connections; good pressure-bearing capability; and ease of handling and installation, to name a few. All of these important benefits are now available in a unique product with optimum clarity. This clarity provides the all-round visibility that specialized applications demand whether it be clean room applications, sight glass, dual-containment or various other processing applications where continuous monitoring is necessary.

Simple solvent-welded joining techniques.Fully compatible with standard PVC hose pipe, fittings and valves.Corrosion resistant, Non-conductive.Resists bacterial and biological activity.Lower overall cost and longevity than other alternatives such as acrylic pipe.

HDPE Granules Virgin Pellets Bulk Price: large ready stock , quick delviery time .

HDPE Granules Virgin Pellets Bulk Supply: large ready stock , quick delivery time .

HDPE Granules Korea Hanwha Factory Supply:Large stock ready , delivery time 5-14 days, Factory directly supply.

Supply HDPE Granules Korea LGCHEM Particles: large quantity stock , delivery 5-14 days ,

HDPE SINOPEC GRANULES SUPPLY:Density range: 0.940g/cm-0.976g/cm,Natural color, size between 2mm and 5mm, powder is white powder, High-density polyethylene granules

Brass Camlock Coupling Type A Male Grooved Adapter And A Female Pipe Thread (bsp Or Npt Thread)

CAM-LOCK COUPLING BRASS Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass

CAM-LOCK COUPLING BRASS Type A
Specifications
Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828.
Casting Method : Sand Casting & Forging
Size : 1/2"-6"
Body Material: Brass
Cam Arm Material: Brass
Gasket Material:
NBR:(Temp Range C -30 C~+100 C)
EPDM:(Temp Range C -50 C~+150 C)
VITON:(Temp Range C -20 C~+200 C)
PTFE envelop gasker:(Temp Range C -190 C~+260 C)
Silicone :(Temp Range C -60 C~+200 C)
Other materials are available on request.
Thread;
NPT
BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT)
Competitive Advantages of the product
A: Precision investment coupling
B:CNC precisely machined
C: Easy to connect and disconnect
D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect

A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles)
Type "A", has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size.
Type "B", has a female camlock end and a male pipe thread of the same size.
Type "C", has a female camlock on one end and a male hose tail on the other.
Type "D", has a female camlock end and a female pipe thread of the same size.
Type "E", has a male camlock on one end and a male hose tail on the other.
Type "F", has a male grooved adaptor and a male pipe thread of the same size.

Brass Camlock Coupling Type D Female Camlock End And A Female Pipe Thread

CAM-LOCK COUPLING BRASS Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass

CAM-LOCK COUPLING BRASS TYPE D
Specifications
Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828.
Casting Method : Sand Casting & Forging
Size : 1/2"-6"
Body Material: Brass
Cam Arm Material: Brass
Gasket Material:
NBR:(Temp Range C -30 C~+100 C)
EPDM:(Temp Range C -50 C~+150 C)
VITON:(Temp Range C -20 C~+200 C)
PTFE envelop gasker:(Temp Range C -190 C~+260 C)
Silicone :(Temp Range C -60 C~+200 C)
Other materials are available on request.
Thread;
NPT
BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT)
Competitive Advantages of the product
A: Precision investment coupling
B:CNC precisely machined
C: Easy to connect and disconnect
D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect

A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles)
Type "A", has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size.
Type "B", has a female camlock end and a male pipe thread of the same size.
Type "C", has a female camlock on one end and a male hose tail on the other.
Type "D", has a female camlock end and a female pipe thread of the same size.
Type "E", has a male camlock on one end and a male hose tail on the other.
Type "F", has a male grooved adaptor and a male pipe thread of the same size.

Brass Camlock Coupling Type F Male Grooved Adaptor And A Male Pipe Thread (NPT/BSPT)

CAM-LOCK COUPLING BRASS Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass

CAM-LOCK COUPLING BRASS TYPE E
Specifications
Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828.
Casting Method : Sand Casting & Forging
Size : 1/2"-6"
Body Material: Brass
Cam Arm Material: Brass
Gasket Material:
NBR:(Temp Range C -30 C~+100 C)
EPDM:(Temp Range C -50 C~+150 C)
VITON:(Temp Range C -20 C~+200 C)
PTFE envelop gasker:(Temp Range C -190 C~+260 C)
Silicone :(Temp Range C -60 C~+200 C)
Other materials are available on request.
Thread;
NPT
BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT)
Competitive Advantages of the product
A: Precision investment coupling
B:CNC precisely machined
C: Easy to connect and disconnect
D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect
CAMLOCK COUPLING BRASS -ALL
A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles)
Type "A", has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size.
Type "B", has a female camlock end and a male pipe thread of the same size.
Type "C", has a female camlock on one end and a male hose tail on the other.
Type "D", has a female camlock end and a female pipe thread of the same size.
Type "E", has a male camlock on one end and a male hose tail on the other.
Type "F", has a male grooved adaptor and a male pipe thread of the same size.

HIGH QUALITY BRASS QUICK CAM-LOCK COUPLINGS TYPE A B C D E F DC DP DIN 2828

Brass camlock coupling B type Standard: A-A-59326 (superseding MIL-C-27487) or DIN 2828,EN14420-7 Material: Brass Sizes: From 1/2 to 6 Types: A, B, C, D, E, F, DC, DP Cam levers: Brass handles

Specifications
Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828.
Casting Method : Sand Casting & Forging
Size : 1/2"-6"
Body Material: Brass
Cam Arm Material: Brass
Gasket Material:
NBR:(Temp RangeC -30C~+100C)
EPDM:(Temp RangeC -50C~+150C)
VITON:(Temp RangeC -20C~+200C)
PTFE envelop gasker:(Temp RangeC -190C~+260C)
Silicone :(Temp RangeC -60C~+200C)
Other materials are available on request.
Thread;
NPT
BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT)
Competitive Advantages of the product
A: Precision investment coupling
B:CNC precisely machined
C: Easy to connect and disconnect
D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect
CAMLOCK COUPLING BRASS -ALL
A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles)
Type "A", has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size.
Type "B", has a female camlock end and a male pipe thread of the same size.
Type "C", has a female camlock on one end and a male hose tail on the other.
Type "D", has a female camlock end and a female pipe thread of the same size.
Type "E", has a male camlock on one end and a male hose tail on the other.
Type "F", has a male grooved adaptor and a male pipe thread of the same size.

Brass Camlock Coupling Type E Male Camlock On One End And A Male Hose Tail

CAM-LOCK COUPLING BRASS Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass

CAM-LOCK COUPLING BRASS TYPE E
Specifications
Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828.
Casting Method : Sand Casting & Forging
Size : 1/2"-6"
Body Material: Brass
Cam Arm Material: Brass
Gasket Material:
NBR:(Temp Range C -30 C~+100 C)
EPDM:(Temp Range C -50 C~+150 C)
VITON:(Temp Range C -20 C~+200 C)
PTFE envelop gasker:(Temp Range C -190 C~+260 C)
Silicone :(Temp Range C -60 C~+200 C)
Other materials are available on request.
Thread;
NPT
BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT)
Competitive Advantages of the product
A: Precision investment coupling
B:CNC precisely machined
C: Easy to connect and disconnect
D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect

A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles)
Type "A", has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size.
Type "B", has a female camlock end and a male pipe thread of the same size.
Type "C", has a female camlock on one end and a male hose tail on the other.
Type "D", has a female camlock end and a female pipe thread of the same size.
Type "E", has a male camlock on one end and a male hose tail on the other.
Type "F", has a male grooved adaptor and a male pipe thread of the same size.

CAM-LOCK COUPLING BRASS Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass

CAM-LOCK COUPLING BRASS TYPE DC
Specifications
Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828.
Casting Method : Sand Casting & Forging
Size : 1/2"-6"
Body Material: Brass
Cam Arm Material: Brass
Gasket Material:
NBR:(Temp Range C -30 C~+100 C)
EPDM:(Temp Range C -50 C~+150 C)
VITON:(Temp Range C -20 C~+200 C)
PTFE envelop gasker:(Temp Range C -190 C~+260 C)
Silicone :(Temp Range C -60 C~+200 C)
Other materials are available on request.
Thread;
NPT
BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT)
Competitive Advantages of the product
A: Precision investment coupling
B:CNC precisely machined
C: Easy to connect and disconnect
D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect

A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles)
Type "A", has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size.
Type "B", has a female camlock end and a male pipe thread of the same size.
Type "C", has a female camlock on one end and a male hose tail on the other.
Type "D", has a female camlock end and a female pipe thread of the same size.
Type "E", has a male camlock on one end and a male hose tail on the other.
Type "F", has a male grooved adaptor and a male pipe thread of the same size.

CAM-LOCK COUPLING BRASS TYPE DP Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging
Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass

CAM-LOCK COUPLING BRASS TYPE DP
Specifications
Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828.
Casting Method : Sand Casting & Forging
Size : 1/2"-6"
Body Material: Brass
Cam Arm Material: Brass
Gasket Material:
NBR:(Temp Range C -30 C~+100 C)
EPDM:(Temp Range C -50 C~+150 C)
VITON:(Temp Range C -20 C~+200 C)
PTFE envelop gasker:(Temp Range C -190 C~+260 C)
Silicone :(Temp Range C -60 C~+200 C)
Other materials are available on request.
Thread;
NPT
BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT)
Competitive Advantages of the product
A: Precision investment coupling
B:CNC precisely machined
C: Easy to connect and disconnect
D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect

A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles)
Type "A", has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size.
Type "B", has a female camlock end and a male pipe thread of the same size.
Type "C", has a female camlock on one end and a male hose tail on the other.
Type "D", has a female camlock end and a female pipe thread of the same size.
Type "E", has a male camlock on one end and a male hose tail on the other.
Type "F", has a male grooved adaptor and a male pipe thread of the same size.

Brass Camlock Coupling Type C Female Camlock On One End And A Male Hose Tail

CAM-LOCK COUPLING BRASS Specifications Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828. Casting Method : Sand Casting & Forging Size : 1/2"-6" Body Material: Brass Cam Arm Material: Brass

CAM-LOCK COUPLING BRASS
Specifications
Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828.
Casting Method : Sand Casting & Forging
Size : 1/2"-6"
Body Material: Brass
Cam Arm Material: Brass
Gasket Material:
NBR:(Temp Range C -30 C~+100 C)
EPDM:(Temp Range C -50 C~+150 C)
VITON:(Temp Range C -20 C~+200 C)
PTFE envelop gasker:(Temp Range C -190 C~+260 C)
Silicone :(Temp Range C -60 C~+200 C)
Other materials are available on request.
Thread;
NPT
BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT)
Competitive Advantages of the product
A: Precision investment coupling
B:CNC precisely machined
C: Easy to connect and disconnect
D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect

A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles)
Type "A", has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size.
Type "B", has a female camlock end and a male pipe thread of the same size.
Type "C", has a female camlock on one end and a male hose tail on the other.
Type "D", has a female camlock end and a female pipe thread of the same size.
Type "E", has a male camlock on one end and a male hose tail on the other.
Type "F", has a male grooved adaptor and a male pipe thread of the same size.

Camlock Coupling Aluminum TYPE A , B, C, D, E, F, DC, DP (NPT/BSPT) DIN 2828

Camlock coupling aluminum factory told Aluminum cam lock fittings allow for quick and secure hose connections. The camlock couplings mate by inserting the grooved coupling into the cam coupling and simply closing the cam or lever arms.

Specifications

Standard : Made as standard of A-A-59326(Superseding MIL-C-27487) or DIN 2828

Casting Method: Die Casting or Gravity Casting

Size : 1/2-8

Body Material: Aluminum

Cam Arm Material: 1-Aluminum Alloy

2-Stainless Steel

3-Brass

Assembly: Body + Gaskets + Handles + Pins + Pull Rings + Safety Clips

Gasket Material:

NBR:(Temp Range C -30 C~+100 C)
EPDM:(Temp Range C -50 C~+150C)
VITON:(Temp Range C -20 C~+200C)
PTFE envelop gasker:(Temp Range C -190C~+260C)
Silicone :( Temp Range C -60 C~+200C)
Other materials are available on request.

Thread;

NPT

BSP( We usually producethe female thread parallel BSPP,male thread tapered BSPT)

Competitive Advantages of the product

A: Precision investment coupling

B: CNC precisely machined

C: Easy to connect and disconnect

D:Used in petrochemical & chemical industries, Fertilizers, steel plants, atomic energy, power plants ect.

A, B, C, D, E, F, DC, DP(A, B, D, F with thread, B, C, D, DC with handles)

Type â??Aâ??, has a male grooved adapter and a female pipe thread (BSP or NPT thread)of the same size.

Type â??Bâ??, has a female camlock end and a male pipe thread of the same size.

Type â??Câ??, has a female camlock on one end and a male hose tail on the other.

Type â??Dâ??, has a female camlock end and a female pipe thread of the same size.

Type â??Eâ??, has a male camlock on one end and a male hose tail on the other.

Type â??Fâ??, has a male grooved adaptor and a male pipe thread of the same size.

High Temperature Resistant Silicone Hump Hose With Rings SAE J20

Construction: Inner:100% High-quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow

Construction:
Inner:100% High quality silicone
Cover:silicone
Reinforcement: 4ply Polyester/Ar amid fabric
Color:Black/Red/Blue/Green/Yellow
Application:
Heating and Cooling Systems, CAC Charge-Air-Cooler
(Hot & Cold side) ,Turbo Charger Systems & Custom
Compressor,Inter-cooler or Intake & Inlet Piping for turbo/
Superchargers. etc

High Temperature Resistant Silicone Heater HOSE SAE J20

Construction: Inner:100% High-quality silicone Cover:silicone Reinforcement: 4ply Polyester/Ar amid fabric Color:Black/Red/Blue/Green/Yellow

Construction:
Inner:100% High quality silicone
Cover:silicone
Reinforcement: 4ply Polyester/Ar amid fabric
Color:Black/Red/Blue/Green/Yellow
Application:
Heating and Cooling Systems, CAC Charge-Air-Cooler
(Hot & Cold side) ,Turbo Charger Systems & Custom
Compressor,Inter-cooler or Intake & Inlet Piping for turbo/
Superchargers. etc

Rubber water hoses, Water delivery hose, Rubber water tubing, Reinforced water hoses, Air delivery hose, Air rubber hose, Flexible Reinforced Air Hoses, Reinforced air tubing, High pressure rubber air pipe line.For a variety of general purposes in industries, construction sites and mines.

Inner Tube:Black Extruded SBR rubber

Reinforcement:High tensile synthetic textile braided

Cover:Black Extruded Smooth SBR- abrasion and ozone resistant rubber

Working Pressure:Constant Pressure 20 Bar / 300 psi

Temperature Range:-30 +80 (-22 F 176 F)