It's black, it sparkles, and it is an experience the stars. Event Decor Direct is the proud provider of our unique Black Starlight Dance Floor. With an array stunning LED's throughout this black acrylic dance floor, the Starlight Floor offers a stunning array of elegance, sophistication, and a jaw dropping experience to any wedding, gala, corporate, or private event. These dancefloors are CE Certified.
This kit includes:
10 x 2ft x 2ft Star Light Panels
45 x 4ft x 2ft Star Light Panels
4 x 2ft Edge Pieces
15 x 4ft Edge Pieces
2 x 4ft Edge w/ Power
2 x Left Corner Edge Pieces
2 x Right Corner Edge Pieces
5 x 53" x 16" x 35" Flight Cases
1 x 51" x 17" x 20.5" Flight Case
1 x 30" x 25" x 35" Flight Case
1 x Small Power Supply Box
2 x Signal Receiver Box
2 x Remote Control
What is the Dance floor weight capacity
- About 1,100 lbs per 10 sq ft
Is the power outlet on one side of the dance floor
- Yes, the cord is on one side of the dance floor. It is also easily accessible to the main power source.
How do the panels connect to each other
- For Starlight Panels you can easily snap them into each other. Connections between panels on the starlight floor are magnetic. This floor includes the ramp edging. No screws or tools needed.
What kind of power supply do they have
Starlight floors:
85-264VAC (47-63Hz)
Output 27V
Consumption 500W
Current 18.6A
Are they water resistant
- They are not water resistant and not meant to be left outdoors. However, spills from drinks that land on top of the floors are fine. The controls are recessed under the panels so spilling liquids won't damage the mechanisms or electronic components.
If left outside rain or other moisture could destroy these LED dance floors.
It's white, it sparkles, and it is an experience the stars. Event Decor Direct is the proud owner of our unique Starlight Dance Floor. With an array stunning LED's throughout this white acrylic dance floor, the Starlight Floor offers a stunning array of elegance, sophistication, and a jaw dropping experience to any wedding, gala, corporate, or private event. These dancefloors are CE Certified.
This kit includes:
8 x 2ft x 2ft Star Light Panels
28 x 4ft x 2ft Star Light Panels
11 x 4ft Edge Pieces
4 x 2ft Edge Pieces
2 x 4ft Edge w/ Power
2 x Left Corner Edge Pieces
2 x Right Corner Edge Pieces
3 x 53" x 16" x 35" Flight Cases
1 x 30" x 25" x 35" Flight Case
1 x 51" x 17" x 20.5" Flight Case
1 x Small Power Supply Box
2 x Signal Receiver Box
2 x Remote Control
What is the Dance floor weight capacity
- About 1,100 lbs per 10 sq ft
Is the power outlet on one side of the dance floor
- Yes, the cord is on one side of the dance floor. It is also easily accessible to the main power source.
How do the panels connect to each other
- For Starlight Panels: you can easily snap them into each other. Connections between panels on the starlight floor are magnetic. This floor includes the ramp edging. No screws or tools needed.
What kind of electric box do they have
Starlight floors:
85-264VAC (47-63Hz)
Output 27V
Consumption 500W
Current 18.6A
Are they water resistant
- They are not water resistant and not meant to be left outdoors. However, spills from drinks that land on top of the floors are fine. The controls are recessed under the panels so spilling liquids won't get into the mechanisms or electronic controls. Leaving them outside in the rain could severely damage them.
It s white, it sparkles, and it is an experience the stars. Event Decor Direct is the proud owner of our unique Starlight Dance Floor. With an array stunning LED's throughout this white acrylic dance floor, the Starlight Floor offers a stunning array of elegance, sophistication, and a jaw dropping experience to any wedding, gala, corporate, or private event. These dancefloors are CE Certified.
This kit includes:
10 x 2ft x 2ft Star Light Panels
45 x 4ft x 2ft Star Light Panels
4 x 2ft Edge Pieces
15 x 4ft Edge Pieces
2 x 4ft Edge w/ Power
2 x Left Corner Edge Pieces
2 x Right Corner Edge Pieces
5 x 53" x 16" x 35" Flight Cases
1 x 51" x 17" x 20.5" Flight Case
1 x 30" x 25" x 35" Flight Case
1 x Small Power Supply Box
2 x Signal Receiver Box
2 x Remote Control
What is the Dance floor weight capacity?
- About 1,100 lbs per 10 sq ft
Is the power outlet on one side of the dance floor?
- Yes, the cord is on one side of the dance floor. It is also easily accessible to the main power source.
How do the panels connect to each other?
- For Starlight Panels: you can easily snap them into each other. Connections between panels on the starlight floor are magnetic. This floor includes the ramp edging. No screws or tools needed.
What kind of electric box do they have?
Starlight floors:
85-264VAC (47-63Hz)
Output 27V
Consumption 500W
Current 18.6A
Are they water resistant?
- They are not water resistant and not meant to be left outdoors. However, spills from drinks that land on top of the floors are fine. The controls are recessed under the panels so spilling liquids won't get into the mechanisms or electronic controls. Leaving them outside in the rain could severely damage them.
Bright LED lights are placed inside the dance floor between two mirrors. The LED lighting bounces from the mirrors, infinity trails of light can be seen from the top of dance floor, creating the amazing 3D effect!
This 3D LED dance floor is controlled by SD/DMX controller and remote.
This 20ft x 20ft Kit Includes:
144 x 3D LED Panels
2 x SD Controller
19 x Flight Cases
16 x 3.28ft Edging
8 x 2.31ft Edging
8 x 1.64ft Edging
Specification:
Voltage: AC90-240V, 50/60Hz
Power Consumption: 15W
Light Source: SMD 5050 3IN1
LED Qty: (pcs/unit) 64pcs RGB3IN1
Color: RGB mixing
Pixel Pitch: 28mm
Control Channel: 30CH
Control: DMX, master slave, sound activated, auto mode
Life Span: â?¥ 30, 000 hours
Housing Color: Black
Surface Cover: Acrylic plate
Waterproof
Switch Power Supply: Built-in and auto switching
Surface Cover: Acrylic 3D Dance Floor
Material: Aluminum
IP Rating: IP54
Certification: CE
Weight: 25lbs per panel
Panel Size: 20" x 20" x 2.6"
Product Advantages:
1. Material: Acrylic plate cover and aluminum base
2. Built for professional use
3. Long life
4. Can arrange to any size
5. Light weight
6. Easy to operate
7. One year warrenty
This 3D LED Floor offers endless color possibilities to modify your surroundings. With minimized heat production, the LED FLOOR has the flexibility for numerous types of applications such as architectural or retail spaces, stage, productions, night clubs, dance floors, and much more. The combination of Red, Green and Blue LEDs offers a tremendous range of colors with smooth transitions from one color to the next. This unit has 3 operating modes Stand Alone, Master/Slave or DMX Control. With 3 dmx control modes the unit provides flexibility for controlling the color mixing and patterns creations for added creativity.
LED Dance Floor
What is the Dance floor weight capacity?
- About 1,100 lbs per 10 sq ft
Is the power outlet on one side of the dance floor?
- Yes, the cords stick out of the color floors so you can plug one panel into the next. The starlight floors snap into each other very easily. No screws or tools needed.
How do the panels connect to each other?
- For Color Floors: there's a power out & in on every panel. You can daisy chain them together and the 1st one is the one you plug into the power.
What kind of power supply do they have?
- Color dance floors do not have an external power supply - it's integrated in the floor.
Can it be synced to music?
- Yes
Are they water resistant?
- They are not water resistant and not meant to be left outdoors. However, spills from drinks that land on top of the floors are fine. The controls are recessed under the panels so spilling liquids won't get into the mechanisms or electronic controls. Leaving them outside in the rain could severely damage them.
Bright LED lights are placed inside the dance floor between two mirrors. The LED lighting bounces from the mirrors, infinity trails of light can be seen from the top of dance floor, creating the amazing 3D effect!
This 3D LED dance floor is controlled by SD/DMX controller and remote.
This 16ft x 16ft Kit Includes:
100 x 3D LED Panels
2 x SD Controller
13 x Flight Cases
12 x 3.28ft Edging
8 x 2.31ft Edging
8 x 1.64ft Edging
Specification:
Voltage: AC90-240V, 50/60Hz
Power Consumption: 15W
Light Source: SMD 5050 3IN1
LED Qty: (pcs/unit) 64pcs RGB3IN1
Color: RGB mixing
Pixel Pitch: 28mm
Control Channel: 30CH
Control: DMX, master slave, sound activated, auto mode
Life Span: â?¥ 30, 000 hours
Housing Color: Black
Surface Cover: Acrylic plate
Waterproof
Switch Power Supply: Built-in and auto switching
Surface Cover: Acrylic 3D Dance Floor
Material: Aluminum
IP Rating: IP54
Certification: CE
Weight: 25lbs per panel
Panel Size: 20" x 20" x 2.6"
Product Advantages:
1. Material: Acrylic plate cover and aluminum base
2. Built for professional use
3. Long life
4. Can arrange to any size
5. Light weight
6. Easy to operate
7. One year warrenty
This 3D LED Floor offers endless color possibilities to modify your surroundings. With minimized heat production, the LED FLOOR has the flexibility for numerous types of applications such as architectural or retail spaces, stage, productions, night clubs, dance floors, and much more. The combination of Red, Green and Blue LEDs offers a tremendous range of colors with smooth transitions from one color to the next. This unit has 3 operating modes Stand Alone, Master/Slave or DMX Control. With 3 dmx control modes the unit provides flexibility for controlling the color mixing and patterns creations for added creativity.
LED Dance Floor
What is the Dance floor weight capacity?
- About 1,100 lbs per 10 sq ft
Is the power outlet on one side of the dance floor?
- Yes, the cords stick out of the color floors so you can plug one panel into the next. The starlight floors snap into each other very easily. No screws or tools needed.
How do the panels connect to each other?
- For Color Floors: there's a power out & in on every panel. You can daisy chain them together and the 1st one is the one you plug into the power.
What kind of power supply do they have?
- Color dance floors do not have an external power supply - it's integrated in the floor.
Can it be synced to music?
- Yes
Are they water resistant?
- They are not water resistant and not meant to be left outdoors. However, spills from drinks that land on top of the floors are fine. The controls are recessed under the panels so spilling liquids won't get into the mechanisms or electronic controls. Leaving them outside in the rain could severely damage them.
230W 7R Moving Head Beam LightModel: JNT-B230NVoltage : AC110-240V/50-60HzTotal power: 400WBlub: Philips MSD Platinum 230W 7R or Osram 7R bulbColor Temperature: 8000° KBallast: Magnetic BallastChannel: 16CH ;Control Mode: DMX512/Master-slave/Auto/SoundColor: 13 colors + white Gobo: 22 Gobos + WhiteStrobe: 0-10 / sec. Speed adjustablePrism: 8+16 facet two- layer prismFocus: electronic focusElectronic focus: 20 meters,Website:http://www.jinnaite-prolight.com, 50000LUXFrost effect: availableRainbow Effect: available to optionDisplay: LCDPan: 540 ° (16bit precision scanning)Tilt: 270 ° (16bit precision scanning)Cooing: Forced ventilation with axial fans.IP rating: IP20Carton Size: 46*42*55cmG.W: 21KG Effect:Color: 14 colors+ white, rainbow effect with bi-directional rotationRotating gobo: 17 gobos + white, round, arbitraryPrism: 16 prism, positive and negative direction of rotationStrobe: Double strobe,13 times /sec, random strobe and pulse strobeThe production processStep 1 checkingThe first step is to check the raw materials whether are good qualifiedCheck the bulb whether can be brightThere is a need for voice-activated components to test whether the voice is normalStep 2 AssemblyEach step of the installation is carefully Professional equipment for testingSchool anniversary
Product description:ã?�GSJ-G2ã??The body cameras for police officers are adopting high-speed processor and embedded real-time operating system. It integrates 33 megapixels high-definition images, Audio, PTT intercom, storage, and integrated IR LEDS for night vision. It can be widely used in law enforcement departments, and greatly
We can customized different kinds of laser marking machine and automatic laser marking system depend on customers requirements. Please contact us to get more details and professional laser marking solutions.
Featured: (High Quality, Widely Application, High Precision)
1, Machine main Features:
We provide fully line - up models of laser marking, cutting, drilling and trimming machine, The laser equipment is installed on a splitting or rewinding machine, to cut, mark, drill,slice and trim on OPP,BOPP, PE,PET,Aluminum paper, paper or soft package. THE process is to use a Laser beam focusing on a designed solid line, dashed line, wave line, and easy tear film to cut a fine line with a depth of only a few microns which has an advantage over Micro processing of materials. It is adjustable, The higher energy density can also be obtained and the material processing can be carried out effectively even the pulse energy is not in a high level. It is a non-contact processing tech,marking, drilling patterns can be set at will without losing the function of cutting, trimming and drilling. It works on roll material with different thickness, it has a better compatibility and versatility.
Double-sided PCBs(Double-sided Printed Circuit Boards)are one step up above single-sided printed circuit boardin their complexity.
Double Sided PCBs require plated through holes between top and bottom pads to provide better anchoring for soldered components. Today the double sided printed circuit board technology remains the workhorse of the assembly industry. There are near limitless applications for old and new designs. Fine line surface mount, ultra high copper build, high and low temperature, Solder coated, Silver, and Gold finishes are just a few examples of double sided board applications.
Hitech Circuits Co., Limited engage in providing the best quality, service and the competitive cost for our customers. If you need more information aboutprinted circuit boards (PCBs), please don't hesitate to contact us.
The following are examples of double sided pcb application.
Industrial controls
Power supplies
Consumer Electronics
LED lighting
Automotive
Phone systems
Control relays
Hard drives
