Find Verified Gas Analyzers Suppliers, Manufacturers and Wholesalers

SAWDUST WOOD MAKING CHARCOAL MACHINE
Sawdust wood making charcoal machine, charcoal machine manual and diy charcoal oven are made by horizontal manufacturing process, in which there is a three-layer structure with polyurethane insulation material in the middle to keep the temperature inside the furnace. The door of the furnace is sealed with filler, which does not enter the air, and the carbon output is much higher than that of the conventional charring furnace. It is called green carbonization furnace because the carbonizing process produces a lot of yellowish combustible gases from the sticks. These gases pass through the charring furnace with its own pipeline, which allows the combustible gases to be transferred to the charring furnace combustion area for secondary fire heating. It is more environmentally friendly and saves fuel. Excess gas from the charring furnace can be used to dry sawdust or to fire the boiler. The cooling time of the charring furnace is shorter, we use the gap between the intermediate layers to naturally cool the charring furnace with unit water cooling, which is more efficient and convenient.

Wood log biochar charcoal machine, bio charcoal making machine and barbecue charcoal machine can use different material as heating source.Such as the waste wood, coal, gas, natural gas, liquefied gas, combustible gas(produced during the carbonized process)

We could customize reasonable and efficient production line according to customers' site, raw materials, output and other requirements.
Firstly, palm shell, coconut shell, wood, bamboo and other biomass are carbonized into charcoal by carbonization furnace and enter hoister and storage tank. According to customer's raw material, you can choose continuous carbonization furnace, horizontal charcoal making stove and hoisting carbonization furnace.
Secondly, charcoal can be crushed into charcoal powder by dust-free grinder.
Thirdly, charcoal powder are stirred by double shaft mixer and mixer.
In the end, charcoal powder can be formed into ball, cylinder, tables and cubic by briquette machine and enter the dryer by drying.

PACKING & SHIPPING
The plastic film bag wrapped machine, according to the size and weight to make wood case, put machine in and fixed the box after loading.

KUNTENG Group Service Items
Pre-sale
1. According to your needs, select right model for you.
2. According to your special requirements, design customized solution and manufacture customized products for you.
3. Welcome your visit.
Sale
1. Sign contract, pay deposit, we arrange production.
2. Product acceptance.
3. Help you formulate construction scheme.
After-sale
1. Assign engineer service for you on-site freely.
2. Install and adjust device, train how to operate.
3. After installation, leaving 1-2 technical staff to help you on-site production, until achieve customer satisfaction.

PRODUCT OVERVIEW
Carbon making machine, charcoal furnace and charcoal stove clay are made by horizontal manufacturing process, in which there is a three-layer structure with polyurethane insulation material in the middle to keep the temperature inside the furnace. The door of the furnace is sealed with filler, which does not enter the air, and the carbon output is much higher than that of the conventional charring furnace. It is called green carbonization furnace because the carbonizing process produces a lot of yellowish combustible gases from the sticks. These gases pass through the charring furnace with its own pipeline, which allows the combustible gases to be transferred to the charring furnace combustion area for secondary fire heating. It is more environmentally friendly and saves fuel. Excess gas from the charring furnace can be used to dry sawdust or to fire the boiler. The cooling time of the charring furnace is shorter, we use the gap between the intermediate layers to naturally cool the charring furnace with unit water cooling, which is more efficient and convenient.

Charcoal carbonization furnace, smokeless charcoal stove and wood ash charcoal machine can use different material as heating source.Such as the waste wood, coal, gas, natural gas, liquefied gas, combustible gas.

We could customize reasonable and efficient production line according to customers' site, raw materials, output and other requirements.
Firstly, rice husk, sawdust or other biomass are crushed by dust free crusher and dryer.
Secondly, biomass powder can be shaped by sawdust briquette machine.
In the end, sawdust stick can be carbonized by carbonization furnace.

PACKING & SHIPPING
The plastic film bag wrapped machine, according to the size and weight to make wood case, put machine in and fixed the box after loading.

COMPANY PROFILE
Henan KUNTENG Machinery Manufacture Co.,Ltd is specilize in producing briquette machine, there are many useless material in the world, our machine can make these material recycling use, and make high profit for user. Our equipment can make charcoal or briquette from waste material. Since our company's inception, has high credibility. Our machine sold at home and abroad. We supply those certifications like CE ISO9001, CO, Form E, COC, CIQ, to help customers from different countries clearance.

KUNTENG Group Service Items
Pre-sale
1. According to your needs, select right model for you.
2. According to your special requirements, design customized solution and manufacture customized products for you.
Sale
1. Sign contract, pay deposit, we arrange production.
2. Product acceptance.
3. Help you formulate construction scheme.
After-sale
1. Assign engineer service for you on-site freely.
2. Install and adjust device, train how to operate.
3. After installation, leaving 1-2 technical staff to help you on-site production, until achieve customer satisfaction.

PRODUCT OVERVIEW
Carbon making machine, charcoal furnace and charcoal stove clay are made by horizontal manufacturing process, in which there is a three-layer structure with polyurethane insulation material in the middle to keep the temperature inside the furnace. The door of the furnace is sealed with filler, which does not enter the air, and the carbon output is much higher than that of the conventional charring furnace. It is called green carbonization furnace because the carbonizing process produces a lot of yellowish combustible gases from the sticks. These gases pass through the charring furnace with its own pipeline, which allows the combustible gases to be transferred to the charring furnace combustion area for secondary fire heating. It is more environmentally friendly and saves fuel. Excess gas from the charring furnace can be used to dry sawdust or to fire the boiler. The cooling time of the charring furnace is shorter, we use the gap between the intermediate layers to naturally cool the charring furnace with unit water cooling, which is more efficient and convenient.

Charcoal carbonization furnace, smokeless charcoal stove and wood ash charcoal machine can use different material as heating source.Such as the waste wood, coal, gas, natural gas, liquefied gas, combustible gas.

We could customize reasonable and efficient production line according to customers' site, raw materials, output and other requirements.
Firstly, rice husk, sawdust or other biomass are crushed by dust free crusher and dryer.
Secondly, biomass powder can be shaped by sawdust briquette machine.
In the end, sawdust stick can be carbonized by carbonization furnace.

PACKING & SHIPPING
The plastic film bag wrapped machine, according to the size and weight to make wood case, put machine in and fixed the box after loading.

COMPANY PROFILE
Henan KUNTENG Machinery Manufacture Co.,Ltd is specilize in producing briquette machine, there are many useless material in the world, our machine can make these material recycling use, and make high profit for user. Our equipment can make charcoal or briquette from waste material. Since our company's inception, has high credibility. Our machine sold at home and abroad. We supply those certifications like CE ISO9001, CO, Form E, COC, CIQ, to help customers from different countries clearance.

KUNTENG Group Service Items
Pre-sale
1. According to your needs, select right model for you.
2. According to your special requirements, design customized solution and manufacture customized products for you.
Sale
1. Sign contract, pay deposit, we arrange production.
2. Product acceptance.
3. Help you formulate construction scheme.
After-sale
1. Assign engineer service for you on-site freely.
2. Install and adjust device, train how to operate.
3. After installation, leaving 1-2 technical staff to help you on-site production, until achieve customer satisfaction.

Description:Stainless Steel Sheet, Cold Rolled Stainless Steel Sheet, Hot Rolled Stainless Steel Sheet
Type:201 202 304 316L 310S 309S 321 316Ti 410 420 430 409 duplex,SAF2205,S31803
Thickness:0.3-60mm
Width:500-2000mm or customized
Length:1000-6000 or customized
Standard size:1000-2000mm, 1250-2500mm, 1219-2438mm, 1500-3000mm
Surface:2B, No.1, No.4, HL, BA, 8K etc
Standard: ASME, ASTM, EN ,BS,GB,DIN, JIS etc
Application:Stainless steel sheet applies to construction field, ships building industry, petroleum & chemical industries,war and electricity industries, food processing and medical industry, boiler heat exchanger,machinery and hardware fields.

High purity Pure Copper Foil / strip / Tape For PWE(PCE) using
99.9% Pure copper tape / strip / foil
Cu%99.90 C11000 Cu ETP
Min thickness:0.001mm
little order can accept
Specification of red copper strip we supply:
Strip: thick:0.15-3.0mm width:610mm
Plate:thick:0.5-3mm width:610mm Length:2500mm

High purity Pure Copper Foil / strip / Tape For PWE(PCE) using
99.9% Pure copper tape / strip / foil
Cu%99.90 C11000 Cu ETP
Min thickness:0.001mm
little order can accept
Specification of red copper strip we supply:
Strip: thick:0.15-3.0mm width:610mm
Plate:thick:0.5-3mm width:610mm Length:2500mm

Gallium metal with a content of 99.99% (also known as Ga-4N) is a common high-purity specification, widely used in fields such as electronics, semiconductors, LEDs, solar cells, and optical materials. It is prepared through purification processes such as acid washing, alkaline electrolysis, or zone melting, and serves as an intermediate product for the preparation of ultra-pure gallium (such as over 99.9999%). Its core characteristics are its low melting point (<30) and excellent thermal and electrical conductivity.

Asia Pacific Symbol (Shandong) Pulp and Paper Co., Ltd.

1. Help customers meet the emission requirements of export NOx emission concentration � 40mg/Nm³.

2. The equipment is simple and stable, the operating cost is low, and the later maintenance is simpler.

We canprovide kinds of air cleaner that removes dust and the best dust removal machine for sale, anything you need, please contact us.

SOx removal from flue gases is the process of reducing or eliminating sulfur oxides, mainly sulfur dioxide, from combustion exhaust streams before they are released into the atmosphere. This treatment step is important for controlling air pollution and for protecting downstream equipment from corrosion and fouling.

If you want to know more about co2 sequestration technology, please visit our website.

LHG series vertical oil & gas fired steam generator is compact vertical type boiler, burning diesel, heavy oil, natural gas, LPG as fuel.
Equipped with famous brand imported burner, fullâ??automatic PLC control system. Realize auto ignition, auto water feeding, pressure automatic adjustment. Builtâ??in multiple safety interlock protection: overâ??pressure, overâ??temperature, low & high water level protection.
Small footprint, fast steam output, low noise, easy installation and maintenance.
Widely used for food sterilization, drying, textile processing, chemical industry, hotel heating, distillation plant and other industrial steam supply.
Working pressure and evaporation capacity can be customized as clientâ??s demand, CE certificate is provided.

Diesel vehicle exhaust gas analyzer (can also be used in gasoline vehicle), belong to customized products, non standard. Increase the reverse blowing system and filtering, purifying device. Can be used for the detection and analysis of diesel oil as fuel of vehicle exhaust emissions group points.
ã??Main technical parametersã??
exhaust gas analyzer
measuring range COï¼?0ï½?10.0 10-2(%) CO2ï¼?0ï½?20.0 10-2(%) HCï¼?0ï½?9999 10-6(ppm)
O2ï¼?0ï½?25.0 10-2(%) NOï¼?0ï½?5000 10-6(ppm)
oil temperatureï¼?18ï½?150 speedï¼?100ï½?20000rpm
resolving power COï¼?0.01% CO2ï¼?0.1% HCï¼?1ppmO2ï¼?0.01% NOï¼?1ppm
oil temperatureï¼?0.1 speedï¼?1rpm
Repetitive error â?¤±2%
Zero drift COï¼?±0.06 10-2(%)/4h CO2ï¼?±0.5 10-2(%)/4h HCï¼?±30 10-6(ppm)/4h
O2ï¼?±0.5 10-2(%)/4h NOï¼?±30 10-6(ppm)/4h
Distance drift No more than shown value error allowed (4 hours)
Indication error COï¼?±5%ï¼?absolute errorï¼?±0.03 10-2 ï¼?
CO2ï¼?±5%ï¼?absolute errorï¼?±0.5 10-2ï¼?
HCï¼?±5%ï¼?absolute errorï¼?±10 10-6 ï¼?±5%ï¼?absolute errorï¼?4001ï½?10000ppmï¼?
O2ï¼?±5%ï¼?absolute errorï¼?±0.1 10-2ï¼?
NOï¼?±4%ï¼?absolute errorï¼?±25 10-6ï¼?
environment condition oil temperatureï¼?±2ï¼?relative errorï¼? speedï¼?±1.0%ï¼?relative errorï¼?
temperatureï¼?0ï½?40 humidityï¼?â?¤80% atmospheric pressureï¼?60ï½?105KPa
Power Supplyï¼?AC 220V±10%ï¼?50Hz±1Hz(Automobile power supply inverter)
Preheating time 10min
Weight Measurement unitï¼?10Kg vice machineï¼?3Kg
Volume Measurement unitï¼?610 * 500 * 330mm
Auxiliary machine:500 * 350 * 330mm
Sampling method Exhaust gas: direct sampling, sampling tube length 5m, sampling probe length 900mm;
Temperature: the temperature measuring head into the engine lubrication oil scale hole, insert the oil rod and the length of the same length, rubber stopper blocked, to prevent oil jet and wire length: 5m;
Speed: the tachometer speed clip in high pressure flexible gasoline engine, can determine the speed of a gasoline engine.
Display mode LCD large screen liquid crystal display
major function 1)Meet GB18285-2005 national standard requirements, measurement of motor vehicle gasoline engine emissions of HC, CO, CO2, O2 and NO concentrations,Of HC, Co, CO2, the advanced NDIR regardless of light and infrared analysis technology (imported from movement detection equipment to meet the requirements of national standard OIMLR99 0 level precision, high precision, strong stability) and of O2 and no by the new electrochemical analysis technology for detection.
2)With idle speed, double idle test function;
3)Auto calculation shows that the excess air coefficient isï¼?
4)Equipped with RS-232C digital serial communication interface, convenient networkingï¼?
5)Matching speed and temperature measurement functionï¼?

I±-olefin sulfonate is a type of anionic surfactant processed by �±-olefin gas-phase sulfonation and continuous neutralization. It has excellent emulsifying, decontaminating and calcium soap dispersing performances. Advantages include good solvency and compatibility, rich and fine foam, easy to biodegradation, low toxicity and low irritation to skin, etc. Especially in the application of non-phosphorus detergents, it has not only the good washing ability, but also good compatibility with enzyme agents.

Disposable respirator Mask folded FFP2 mask manufacturer high quality CE approved face masks
It's mainly made of PP non woven fabrics and melt-blown filter material
The disposable respirator mask can be used in the environment of�  high particle and dust due to the ability to filtering.
Respirator Masks are made with skin-friendly non-woven fabric to prevent irritation and itchiness. The adjustable head loops have more padding than other masks, making them more comfortable for everyday use.
Disposable respirator Mask� are made of 5-layers of protection. 2 non-woven outer layers, 2 melt-blown inner filters, 1 non-woven hot cotton final layer that offers superior protection without sacrificing comfort.
The metal nose clip allows for a quick custom fit around� nose while ensuring there are no air gaps. The 2 elastic headbands keep the mask in place during use.
Head Straps With NO Staples for Extra Comfort
Ultimate Snug fit with a strong face seal
Zero fogging when wearing glasses
This protective mask cannot generate oxygen and should not be used in hypoxic environments.
It is not a N95 certified Mask for USA yet. Not intended as a replacement for gas masks and medical masks. Not for use if breathing is impeded or unsteady, or during sleep. DAILY USE: Suitable for adults daily travel protection, not suitable for toxic gas environment use.

Used in the production of acetylene gas, polyvinyl chloride, lime nitrogen, dicyandiamide, iron and steel desulfurizer, etc., used in electronics industry, teaching reagents. Calcium carbide is used for chemical production accounts for about 60%, and the remaining 40% is used for metal welding and cutting. Using calcium carbide as raw material can produce a series of chemical products, such as PVC resin, polyvinyl alcohol, vinyl acetate, neoprene rubber, butanol, octanol, tricyanoethylene, tetracyanoethylene, acetaldehyde, acetylene carbon black, lime nitrogen, etc.

MiniEDU 20 MRI system is Niumag's original product, first used as an integral part of other products. After nearly 10 years of enhancements, its design and functionality are comprehensive and mature. MiniEDU 20 can be used by physics lecturers to demonstrate NMR experiments and imaging professionals to teach courses, so that multiple students gain experience in using MR technology without needing to operate expensive instruments.

Flue Gas Heat Economizer â?? Waste Heat Recovery System for Hot Dip Galvanizing
The flue gas heat economizer is a� hot dip galvanizing equipment� designed specifically for� hot dip galvanizing plants. It captures residual heat from the galvanizing furnace flue gas before it is released into the atmosphere, and reuses that thermal energy to heat the flux (pre-treatment solvent) tank â?? reducing fuel consumption and lowering the plant's overall energy costs.
In a typical hot dip galvanizing line, flue gas leaves the heating furnace at temperatures of around 350â??400�°C, carrying a large amount of recoverable thermal energy that would otherwise be released into the atmosphere. Our waste heat recovery system extracts this energy through a corrosion-resistant tube heat exchanger mounted directly on the furnace flue, converting it into usable hot water for process heating.
Key Benefits
High heat recovery efficiency� â?? flue gas heat exchangers of this type typically recover 50â??70% of the available waste heat in the furnace exhaust
Lower fuel and energy costs� â?? recovered heat reduces or eliminates the need for separate fuel/electric heating of the flux tank, cutting auxiliary energy consumption
Reasonable payback period� â?? industrial flue gas heat recovery systems generally pay back their investment within 2â??5 years, depending on furnace size, fuel cost, and operating hours
Reduced emissions� â?? less auxiliary fuel burned means lower COâ?? and flue gas emissions, supporting environmental compliance
Stable process temperature� â?? maintains flux tank temperature at 65�°C �± 5�°C automatically via closed-loop temperature control
Corrosion-resistant design� â?? components are built to withstand the acidic, zinc-particle-laden flue gas environment typical of galvanizing lines
� 
Waste-heat Utilization Unit
Components:� Tube heat exchanger, PP radiator, Expansion Tank, Hot water circulation Pump, Water softener, pipe fittings, Temperature control system, Electric control cabinet
� 
How It Works
The tubular heat exchanger is installed directly on the galvanizing furnace flue, where flue gas heat-exchange temperature reaches 90â??100�°C at the exchanger surface.
The hot water circulation pump draws heated water from the exchanger into an expansion tank, which buffers pressure and volume changes in the closed-loop system.
Hot water then flows into the PP radiator, where heat is transferred to the flux (pretreatment solvent) tank.
A temperature control system continuously monitors and regulates flow, keeping the solvent tank at a stable 65�°C �± 5�°C without manual adjustment.
A water softener protects the system from scale buildup, extending equipment service life and maintaining heat-transfer efficiency over time.

Gas Headspace Analyzer adopts a new handheld design and is equipped with advanced sensors, which can accurately and conveniently determine O2, CO2, N2 in sealed packaging bags, bottles, cans and other packaging containers. It can store the testing data in the device and transfer to the DK-190 software or third-party software. Effectively testing the atmosphere of the package is necessary steps of mass brand manufacturing.

Features
Testing data can be saved automatically.
Portable design is suitable for test on production lines.
The testing data can be transported to the DK-190 software or the third-party software.
The protective cover of the sampler needle assured the testing safety.
The built-in storage of data can reach 1500 pieces , which can meet the needs of large amount.
Color display with touching function.
It can be used for measurement of oxygen or combination of oxygen and carbon dioxide.
The minimum volume of sampling gas is 3 ml.
Data can be transmitted through Ethernet and USB.
Optional wireless micro-printer.

Principle
The gas is transported to the embedded sensor which calculate the proportion of O2 and CO2 via the exported signal, the test is stopped when the required condition is reached.
Standards

This test instrument conforms to many national and international standards:
ISO 15105-1, ISO 2556, ASTM D1434, JIS K7126-1, GB/T 1038-2000, YBB 00082003.

Applications
Packaging Bags Test the volume of O2 and CO2 (optional) in headspace of non-vacuum sealed packaging bags of coffee, cheese, milk tea, milk powder, bread, bean powder, instant food and drugs, etc.
Packaging Containers Test the volume of O2 and CO2 (optional) in headspace of packaging containers of coffee, milk powder, food, cheese, can, Tetra Pak and beverage, etc.

Technical Specifications
Testable Gas O2 (Standard) CO2 (Optional)
Test Principle Electrochemistry Infra-red absorption
Life of Sensor 2 years (In air) >15 years
Specification of Sensor 0-100%
Resolution 0.01 %
Accuracy ±0.2% ± (0.03% reading value *5%)
Sampling Volume 3ml (Standard Mode)
Dimension 230mm (L) 120mm (W) 82mm (H)
Power Supply 220V AC ± 10% 50Hz 120V AC ± 10% 60Hz
Net Weight 1 kg

Configurations
Standard: Instrument, Sampling needle, Filter, Sealing gasket
Optional: Wireless printer, DK-190PC Professional Software, Device for testing ampoule, Standard portable bag

Appearance: white or light yellow powder.

Characteristic:
�±-olefin sulfonate is a type of anionic surfactant processed by �±-olefin gas-phase sulfonation and continuous neutralization. It has excellent emulsifying, decontaminating and calcium soap dispersing performances. Advantages include good solvency and compatibility, rich and fine foam, easy to biodegradation, low toxicity and low irritation to skin, etc. Especially in the application of non-phosphorus detergents, it has not only the good washing ability, but also good compatibility with enzyme agents. Powder (grain) shape products have good fluidity.

Lithium hydroxide can be used as developing agent and lubricating oil for spectral analysis The additive of alkaline battery electrolyte can increase the electric capacity by 12 to 15 and increase the service life by 2 to 3 times
It can be used as an absorbent for carbon dioxide and can purify the air in submarines
The chemical equation is 2LiOHsCO2gLi2CO3sH2Ol
It is used to make lithium salt and lithiumbased grease electrolyte of alkaline battery absorption liquid of lithium bromide refrigerator etc used in petroleum chemical industry light industry nuclear industry etc When used in alkaline batteries the aluminum content is not more than 006 and the lead content is not more than 001 It is used as an analytical reagent a photographic developer and also in the manufacture of lithium it is used as a raw material for the preparation of lithium compounds It can also be used in metallurgy petroleum glass ceramics and other industries
Lithium hydroxide is mainly consumed for the production of lithium greases A popular lithium grease is lithium stearate which is a generalpurpose lubricating grease due to its high resistance to water and usefulness at both high and low temperatures
Carbon dioxide scrubbing
Lithium hydroxide is used in breathing gas purification systems for spacecraft submarines and rebreathers to remove carbon dioxide from exhaled gas by producing lithium carbonate and water
It is used as a heat transfer medium and as a storagebattery electrolyte It is also used in ceramics and some Portland cement formulations Lithium hydroxide isotopically enriched in lithium7 is used to alkalize the reactor coolant in pressurized water reactors for corrosion control

Molecular formula: Re

Molecular weight: 186.207

CAS No.: 7440-15-5

Appearance: Dark grey Metallic Powder

Specifications: main content Re 99.99% (calculated by subtraction method, excluding gas elements)

Application: Rhenium element standard sample; Rhenium element additive for various superalloys; Base material for various rhenium components; 3D printing and others

Hall flow (s/50g): <=30s

Particle size: FSSS 0-20�¼m, 15-45�¼m, 15-53�¼m, 53-105�¼m, 53-150m, 105-250m, Standard: YS/T 1017-2015

Spheroidization rate > 95%

Other trace metal impurity , analysis method: ICP-MS Gas element (â?¤, analysis method: LECO

Na
0.0005%
Ti
0.0001%
Cu
0.0001%
Sb
0.0001%
Mg
0.0001%
V
0.0001%
Zn
0.0001%
Ta
0.0001%
Al
0.0005%
Cr
0.0005%
As
0.0001%
W
0.0005%
Si
0.0005%
Mn
0.0001%
Zr
0.0001%
Pb
0.0001%
P
0.0005%
Fe
0.0008%
Mo
0.0010%
Bi
0.0001%
K
0.0005%
Co
0.0001%
Cd
0.0001%
Se
0.0001%
Ca
0.0005%
Ni
0.0001%
Sn
0.0001%
Tl
0.0001%
O
0.01%
C
0.002%
N
0.001%
H
0.005%
Applications
1. It is used to make heat-resistant and corrosion-resistant alloy.

2.Used for making high temperature thermocouple, special filament and catalyst in organic synthesis industry.

Granular activated carbon is defined as the activated carbon being retained on a 50-mesh sieve. GAC products are made from coconut shell, coal, lignite, and anthracite products. Adsorption is the primary mechanism by which GAC works and the primary reason it is widely used to reduce undesirable taste, odor and color and to improve the safety of drinking water. Coconut granular activated carbon is mainly used for gold recovery. And 4*8mesh coconut shell activated carbon is usually applied for some heavy metals removal from the waste gas. According to different applications, clients can choose different activated carbon types according to the specific working conditions.