Product Characteristics
Model:Model Y9-38,Y8-39 boiler centrifugal/induced draft fan
Flow:14978-161499m3/min
Shaft power:5.5-160KW
Pressure:400-6679Pa
Port Dia:800-1600A mm
Rotating Speed:730-1450r/min
Product Introduction
Model Y9-38 and Model Y8-39 boiler centrifugal induced draft fan is the latest type of high efficiency and energy saving fan in China.It is widely applicable in the combustion of kinds of coal, and it is designed for industrial boiler (1 ~ 35T/h) with dust elimination device.
The advantage of the fan is high efficiency, wide high-efficiency operation area,low noise,stable, reliable and economical operation.
The medium by the induced draft fan is smoke gas,The maximum conveying temperature should not exceed 250ºC.In front of induced draft fan inlet,the dust elimination device with dust elimination efficiency no less than 85% must be equipped to improve the lifetime of induced draft fan.
Product Characteristics
Model:9-19,9-26
Flow:824-123090m3/h
Pressure:3253-16250Pa
Rotation speed:960-2900r/min
Power:2.2-850KW
Transmission Way:A type(4~6.3)and D type(7.1~16)
The 9-19 centrifugal fan belongs to single suction,could be made two kinds as right-handed and left-handed.Front view is taken from the end of motor,if the impeller turns clockwise,it is called right-handed ventilator,expressed by "Right";if it turns counterclock wise,called left-handed ventilator,expressed by "Left".
The air outlet position is expressed by the air outlet of shell."Clockwise"and "anticlockwise" could be made into totally six angles such as 0°,45°,90°,135°,180°,225°.
Product Characteristics
Model:9-19,9-26
Flow:824-123090m3/h
Pressure:3253-16250Pa
Rotation speed:960-2900r/min
Power:2.2-850KW
Transmission Way:A type(4~6.3)and D type(7.1~16)
The 9-26 centrifugal fan belongs to single suction,could be made two kinds as right-handed and left-handed.Front view is taken from the end of motor,if the impeller turns clockwise,it is called right-handed ventilator,expressed by "Right";if it turns counterclock wise,called left-handed ventilator,expressed by "Left".
The air outlet position is expressed by the air outlet of shell."Clockwise"and "anticlockwise" could be made into totally six angles such as 0°,45°,90°,135°,180°,225°.
2.Product Characteristic
Flow:755-56902m3/min
Power:0.75-37KW
Pressure:294-3667Pa
Rotation speed:400-40000r/min
C4-73 mainly consist of impeller,air inlet,shell,transmission part and motor.
The fan is made in to single suction,three types for the machine code 3.6C,4.5C,5.5C.
The ventilator is made two kinds as left-handed and right-handed.Front view is taken from the end of motor,if the impeller turns clockwise,it is called right-handed vi-lator,expressed by "Right";if it turns counterclock wise,called left-handed ventilator,expressed by "Left".
The air outlet position is expressed by the air outlet of shell.The adjustable range is 0°~225°."Clockwise"and "anticlockwise" could be made into total 6 angles such as 0°,45°,90°,135°,180°,225°.
Model:C4-73,C6-48
556 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
Product Characteristic
Model: Model Y5-48 Boiler Centrifugal Induced Draft Fan
Flow:2065-67803m3/min
Shaft power:2.2-110KW
Pressure:742-4483Pa
Port Dia:355-1120A mm
Rotating Speed:1000-3550r/min
Product Introduction
Model Y5-48 boiler centrifugal induced draft fan is designed for industrial boiler (1~20T/h) which burns all kinds of coal and is equipped with dust removal device.It is suitable for anywhere with appropriate intake condition and corresponding performance,but the maximum temperature should not exceed 250ºC.
In front of induced draft fan,it must set a dust elimination device to reduce the dust content of the smoke gas into the fan.According to the general usage of power plant,the dust elimination efficiency is not less than 85%.
In consideration of economy of the fan, triangle belt(C type)transmission is adopted,which can not only meet the requirement of the same tonnage boiler configuration of all kinds of dust remover with different rotating speed of one machine number, but also reduce the fan series and machine number.And It is convenient for user according to the actual situation, to choose different rotating speed to obtain the required and more ideal flow as well as pressure.
3. Product characteristics
Model: 2.8,3.2,3.6,4,4.5,5,6,6.3,7,8,10,12.5,16,20,etc.
Transmission way: 2.8~5(A type);6~12.5(C,D,E type);16~20(B type)
Flow: 565-239654 m3/h
Pressure: 166-3863 Pa
Power: 0.55-220 KW
Rotating speed: 250-2900 r/min
1. Product Introduction
Model 4-72 centrifugal blower is applicable in ventilating and conveying air and other gases that non-flammable, non-explosive, non-volatile, harmless to the human body, non -corrosive to steel in general factory and large buildings indoor. B4-72 centrifugal blower can be used for pumping flammable and volatile gases.F4-72 model is mainly used for conveying corrosive gases.But there must be no any sticky substance in the gases that Model 4-72,B4-72,F4-72 centrifugal blower conveys, and the dust and hard particles contained no more than 150mg/m3. Gas temperature should not exceed 80ºC.
At Fuzhou Symbiosistas Co. Ltd. our goal is to improve the accessibility of the Chinese energy market by providing a reliable pathway to products on the cutting edge of Chinese innovation. Our current product offerings include Digital Transformation Blockchain Power Systems, both name brand and OEM diesel gensets from 5-3500KVA and all parts related to gensets. We provide genset OEM factories, genset dealers, and genset maintenance companies with matching services. We also help to resolve payment and aftersales disputes between Chinese and international firms.
*CE, CSA, EPA, RETIE, SGS, and UL certification is available upon request.
At Fuzhou Symbiosistas Co. Ltd. our goal is to improve the accessibility of the Chinese energy market by providing a reliable pathway to products on the cutting edge of Chinese innovation. Our current product offerings include Digital Transformation Blockchain Power Systems, both name brand and OEM diesel gensets from 5-3500KVA and all parts related to gensets. We provide genset OEM factories, genset dealers, and genset maintenance companies with matching services. We also help to resolve payment and aftersales disputes between Chinese and international firms.
*CE, CSA, EPA, RETIE, SGS, and UL certification is available upon request.
At Fuzhou Symbiosistas Co. Ltd. our goal is to improve the accessibility of the Chinese energy market by providing a reliable pathway to products on the cutting edge of Chinese innovation. Our current product offerings include Digital Transformation Blockchain Power Systems, both name brand and OEM diesel gensets from 5-3500KVA and all parts related to gensets. We provide genset OEM factories, genset dealers, and genset maintenance companies with matching services. We also help to resolve payment and aftersales disputes between Chinese and international firms.
*CE, CSA, EPA, RETIE, SGS, and UL certification is available upon request.
Tide Power System Co., Ltd. is a professional gas & diesel generator set manufacturer since 2006. In the past ten years we have committed ourselves to research and design in eco-friendly power solution which is of rapid demand around the world. As a leading gas generator supplier, we have experience in assemble gensets using different fuel source which includes natural gas, biogas, syngas/biomass gas and also systems that can maximize the use of heat like CHP and CCHP. Welcome your enquiry and visits.
Product Specification / Models
Consumable parts for Gas generator: CAT MWM spare parts / spark plug 12453318, 12452828, 12282839, 12284432, 12285126, MTU spark plug, GE Jenbacher spark plug P7 382195, Perkins spark plug 382195; FG Wilson spark plug 10000-16272, 1000016272 GE Waukesha spark plug, Guscor spark plug
