Have a nice day! I am Cauter Yan from Aolan industry Co., Ltd. u had visit our booth at Sydney last week, we are leading manufacturer of air cooler(from 1000m3/h upto 100000m3/h), HVLS FAN from china. I send some pictures of our products for your reference as attachment. Hope we have a cooperate opportunity in future!
Motor:
Aolan uses a new generation of permanent magnet synchronous external rotor motor, combined with oil -cooled technology.
Energy -saving
Small volume and light quality;
Low noise;
Simple structure;
FM width (0 ~ 50Hz);
Drive motor free maintenance;
No hidden dangers;
Quickly heat dissipation;
long life;
No wear.
1) Fan blades and tails: remain unchanged.
2) The fixed rack of the fan blades: Make a safe upgrade to achieve dual insurance (the 1st generation fixed frame is independent, and the 2nd generation is the overall type).
3) Anti -fracture shaft connection: The first generation of the films have multiple design bands, poor safety, the second -generation connector is designed with a flat tablet, without bending, high safety.
4) Link cover: 2nd generations increase the sheet metal cover, which is relatively beautiful. At the visual level, the hanging fan forms the whole and enhances the sense of security.
5) The fixing method of steel wire rope: Originally fixed at the lower end of the connection sheet, it is now fixed to the upper end, the overall is more beautiful.
6) Alarm (non -standard): remain unchanged. When an HVLS fan fails, the motor will automatically decelerate and trigger the alarm switch. The alarm lights are flickering and whistle, reminding the personnel to stay away, avoiding the occurrence of accidents, and greatly enhancing the customer's sense of security.
Product Characteristics
Model:Model Y9-38,Y8-39 boiler centrifugal/induced draft fan
Flow:14978-161499m3/min
Shaft power:5.5-160KW
Pressure:400-6679Pa
Port Dia:800-1600A mm
Rotating Speed:730-1450r/min
Product Introduction
Model Y9-38 and Model Y8-39 boiler centrifugal induced draft fan is the latest type of high efficiency and energy saving fan in China.It is widely applicable in the combustion of kinds of coal, and it is designed for industrial boiler (1 ~ 35T/h) with dust elimination device.
The advantage of the fan is high efficiency, wide high-efficiency operation area,low noise,stable, reliable and economical operation.
The medium by the induced draft fan is smoke gas,The maximum conveying temperature should not exceed 250ºC.In front of induced draft fan inlet,the dust elimination device with dust elimination efficiency no less than 85% must be equipped to improve the lifetime of induced draft fan.
Product Characteristics
Model:9-19,9-26
Flow:824-123090m3/h
Pressure:3253-16250Pa
Rotation speed:960-2900r/min
Power:2.2-850KW
Transmission Way:A type(4~6.3)and D type(7.1~16)
The 9-19 centrifugal fan belongs to single suction,could be made two kinds as right-handed and left-handed.Front view is taken from the end of motor,if the impeller turns clockwise,it is called right-handed ventilator,expressed by "Right";if it turns counterclock wise,called left-handed ventilator,expressed by "Left".
The air outlet position is expressed by the air outlet of shell."Clockwise"and "anticlockwise" could be made into totally six angles such as 0°,45°,90°,135°,180°,225°.
Product Characteristics
Model:9-19,9-26
Flow:824-123090m3/h
Pressure:3253-16250Pa
Rotation speed:960-2900r/min
Power:2.2-850KW
Transmission Way:A type(4~6.3)and D type(7.1~16)
The 9-26 centrifugal fan belongs to single suction,could be made two kinds as right-handed and left-handed.Front view is taken from the end of motor,if the impeller turns clockwise,it is called right-handed ventilator,expressed by "Right";if it turns counterclock wise,called left-handed ventilator,expressed by "Left".
The air outlet position is expressed by the air outlet of shell."Clockwise"and "anticlockwise" could be made into totally six angles such as 0°,45°,90°,135°,180°,225°.
2.Product Characteristic
Flow:755-56902m3/min
Power:0.75-37KW
Pressure:294-3667Pa
Rotation speed:400-40000r/min
C4-73 mainly consist of impeller,air inlet,shell,transmission part and motor.
The fan is made in to single suction,three types for the machine code 3.6C,4.5C,5.5C.
The ventilator is made two kinds as left-handed and right-handed.Front view is taken from the end of motor,if the impeller turns clockwise,it is called right-handed vi-lator,expressed by "Right";if it turns counterclock wise,called left-handed ventilator,expressed by "Left".
The air outlet position is expressed by the air outlet of shell.The adjustable range is 0°~225°."Clockwise"and "anticlockwise" could be made into total 6 angles such as 0°,45°,90°,135°,180°,225°.
Model:C4-73,C6-48
Product Characteristic
Model: Model Y5-48 Boiler Centrifugal Induced Draft Fan
Flow:2065-67803m3/min
Shaft power:2.2-110KW
Pressure:742-4483Pa
Port Dia:355-1120A mm
Rotating Speed:1000-3550r/min
Product Introduction
Model Y5-48 boiler centrifugal induced draft fan is designed for industrial boiler (1~20T/h) which burns all kinds of coal and is equipped with dust removal device.It is suitable for anywhere with appropriate intake condition and corresponding performance,but the maximum temperature should not exceed 250ºC.
In front of induced draft fan,it must set a dust elimination device to reduce the dust content of the smoke gas into the fan.According to the general usage of power plant,the dust elimination efficiency is not less than 85%.
In consideration of economy of the fan, triangle belt(C type)transmission is adopted,which can not only meet the requirement of the same tonnage boiler configuration of all kinds of dust remover with different rotating speed of one machine number, but also reduce the fan series and machine number.And It is convenient for user according to the actual situation, to choose different rotating speed to obtain the required and more ideal flow as well as pressure.
3. Product characteristics
Model: 2.8,3.2,3.6,4,4.5,5,6,6.3,7,8,10,12.5,16,20,etc.
Transmission way: 2.8~5(A type);6~12.5(C,D,E type);16~20(B type)
Flow: 565-239654 m3/h
Pressure: 166-3863 Pa
Power: 0.55-220 KW
Rotating speed: 250-2900 r/min
1. Product Introduction
Model 4-72 centrifugal blower is applicable in ventilating and conveying air and other gases that non-flammable, non-explosive, non-volatile, harmless to the human body, non -corrosive to steel in general factory and large buildings indoor. B4-72 centrifugal blower can be used for pumping flammable and volatile gases.F4-72 model is mainly used for conveying corrosive gases.But there must be no any sticky substance in the gases that Model 4-72,B4-72,F4-72 centrifugal blower conveys, and the dust and hard particles contained no more than 150mg/m3. Gas temperature should not exceed 80ºC.
1.Soft, flexible foam conforms to the unique shape of each ear for comfortable noise reduction
2.Flexible stem makes fitting easy without the need to touch the foam tip so the tips stay clean even when hands are dirty
3.Poly bag keeps earplugs clean before use
this machine is designed for heat transfer artwork onto mugs A heat press is a machine engineered to imprint a design or graphic on a substrate, such as a t-shirt, with the application of heat and pressure for a preset period of time. While heat presses are often used to apply designs to fabrics, specially designed presses can also be used to imprint designs on mugs, plates, jigsaw puzzles, caps, and other products
Fujian Hongfeida Automation Technology Co., Ltd. was established in 2011 in a coastal city: Fuzhou. The scale of this company has been steadily expanding after years of development. The current office location is in Fuzhou Free Trade Zone. The company has the right to import and export. Relying on the advantage of the Free Trade Zone and the perfect supporting resources, it has long-term cooperation with Europe, the United States, Japan and other global well-known industrial manufacturers, and acts as an agent for the distribution of world-renowned brand industrial automation products.
Since the establishment of the company, it has provided large-size DCS system spare parts, imported industrial robot spare parts, large-scale servo system motor drivers, frequency converters, solenoid valves, cylinders, flow meters, sensors, safety barriers, thermostats and other products. Itâ??s products are widely used in power, electronic, metallurgy, chemical, automobile manufacturing, machine tools, packaging machinery, machinery and equipment and many other fields. At present, the company's business covers all provinces and cities across the country. With many yearsâ?? experience, we have summed up the mature modes of service for system users, humanization of services, simplification of processes, and standardization of management, which effectively helps customers extend the life cycle of electrical equipment, reduce operating costs, control the risk of stop production, and increase production efficiency. We always provide customers with satisfactory industrial automation products with first-class quality and superb service, which has been well received by users. Since the company provides one-year warranty of the products, the users can use the products with an easy mind.
If any of you have the willing to cooperating with us, please send Email ME Thank you!
IC695PSA040
IC695PSD140
IC695CPU320-EH RX3i 1Ghz
IC694MDL660
IC695ALG616
IC694MDL754
IC695ALG708
IC695NIU001 RX3i
R911281505,MHD041B-144-NP1-UN
Tightening the shaft motor EC304 MNR:0608701018
 BOSCH Rexroth Module HCS02.1E-W0028-A-03-NNNN 1
 REXROTH module HSZ01.1-D08-D04-NNNN 1 REXROTH
3HAC046686-002
1762-L40BWA
SGMCS-04C3C11
3HNA024966-001
3HNA016162-001
3HNA024855-001
3HAC050363-001
3HNA023282-001
3HNA024203-001
Fujian Hongfeida Automation Technology Co., Ltd. was established in 2011 in a coastal city: Fuzhou. The scale of this company has been steadily expanding after years of development. The current office location is in Fuzhou Free Trade Zone. The company has the right to import and export. Relying on the advantage of the Free Trade Zone and the perfect supporting resources, it has long-term cooperation with Europe, the United States, Japan and other global well-known industrial manufacturers, and acts as an agent for the distribution of world-renowned brand industrial automation products.
Since the establishment of the company, it has provided large-size DCS system spare parts, imported industrial robot spare parts, large-scale servo system motor drives, frequency converters, solenoid valves, cylinders, flow meters, sensors, safety barriers, thermostats and other products. Its products are widely used in power, electronic, metallurgy, chemical, automobile manufacturing, machine tools, packaging machinery, machinery and equipment and many other fields. At present, the company's business covers all provinces and cities across the country. With many years experience, we have summed up the mature modes of service for system users, humanization of services, simplification of processes, and standardization of management, which effectively helps customers extend the life cycle of electrical equipment, reduce operating costs, control the risk of stop production, and increase production efficiency. We always provide customers with satisfactory industrial automation products with first-class quality and superb service, which has been well received by users. Since the company provides one-year warranty of the products, the users can use the products with an easy mind.
If any of you have the willing to cooperating with us, please send Email ME Thank you!
IC695PSA040
IC695PSD140
IC695CPU320-EH RX3i 1Ghz
IC694MDL660
IC695ALG616
IC694MDL754
IC695ALG708
IC695NIU001 RX3i
R911281505,MHD041B-144-NP1-UN
Tightening the shaft motor EC304 MNR:0608701018
 BOSCH Rexroth Module HCS02.1E-W0028-A-03-NNNN 1
 REXROTH module HSZ01.1-D08-D04-NNNN 1 REXROTH
3HAC046686-002
1762-L40BWA
SGMCS-04C3C11
3HNA024966-001
3HNA016162-001
3HNA024855-001
3HAC050363-001
3HNA023282-001
3HNA024203-001
