Find Verified Low Calorie Sugar Suppliers, Manufacturers and Wholesalers

Low-speed hand piece kit, including two pieces of standard screw type hand piece, one piece of straight, one contra angle, one air motor and two pieces of bur change.

Low-vacuum (amniotic fluid) suction apparatus
Model DYX-1A

1. Max vacuum: 18+1.5kpa(135+11mmhg)
2. Vacuum range: 2kpa(15mmhg)-max vacuum
3. Flow rate: l/min
4. Noise:ü55db(a)
5. Jar capacity: 1000ml(pc)
6. Power supply: ac220và10%, 50hz
7. Power input: 30va
8. Gw: 3.5kg; nw: 2.5kg
9. Dimension: 63.8cm17.6cm32.5cm(one set)
40cm 37cm34cm (two sets).

This product can be used to remove the iron magnet materials of the powder of following industries : ceramic, mining, chemical, electronics and so on.

Features:
Lower energy consumption, high magnetic field is well designed to ensure the iron tramp effect.

The remove of magnetism particles will be done automatic, easy to clean.

The magnetism substances remove and clean process time can be adjusted flexible, is widely to use for many different section.

High quality, comfortable design, low price

High-frequency vibrating screening filter with magnetic separator

Application:
This product, with functions of producing, grading and filtering the slip material, powder material and granules, can be widely applied in a variety of settings : food, medical, chemical, grinding compound, ceramics, mining, painting, metallurgical, geological, geological, national defense and electronic industries etc.

Features:
The high- frequency sieve, developed and produced by our company, is of high efficiency, small oscillation amplitude, little noise, high screening frequency. There is a different working principle compared to ordinary screening devices. Because of high frequency, it is able to destroy the pulp surface strain and hinder small grain materials vibrating at high speed on surface, able to accelerate to separate useful mineral in great density and generate a vibration of the screening cloth of small amplitude. Thus this unique characteristic has created better separating condition to make easy the passage of the powder grains through the screen holes especially large proportion grain and slurry;

Each high frequency sieve is loaded with a piece of rack that is movable at will in the operational site whose height is regulated, lt does not need to carry on the complix installment, easy in operation but hard to damage;

That ip54 protection rank, f level insulation and 24 hours work system prolongs the usage life of electrical machinery and assures regular operation in bad environment.

High quality, comfortable design, low price, standard export packing, large quantity can be loaded inside container.

Hospital bed

High quality, comfortable design, low price, standard export packing, large quantity can be loaded inside container.

Medical bed
High quality, comfortable design, low price, standard export packing, large quantity can be loaded inside container.

Bedroom furniture
High quality, comfortable design, low price, standard export packing, large quantity can be loaded inside container.

Patient chair
High quality, comfortable design, low price, standard export packing, large quantity can be loaded inside container.

This product, with functions of removing iron powder, micro iron powder, magnetic substance and other materials, can be applied in a variety of settings: ceramic, mining ,chemical, electronic and food industries...Etc. The completely automatic electromagnetic separator, used in a simple and convenient way, is developed and manufactured specially in order to select the raw material pottery clay mud which is used in the ceramic, bricks and tiles industry (below temperature 60 degree celsius).

Features:
Low energy consumption, high magnetic field gradient, even magnetic field distribution and obvious effort in eliminating iron.

The h level high temperature electromagnetic wire is adopted . Lts insulation rank is enhanced 5-10 times compared to the previous ones.

Completely automatic work, no need manual work, eliminating iron in a fast, convenient and more complete way with no iron powder remaining.

The vibration electrical machinery with the assistant of high-pressure water pump to wash is used for getting rid of iron without dead corner and residuum.

The brake valve is made up of the imported raw materials, no leaking, low attrition, low block in flowing and low air consumption.

The highly effective stainless steel is used in making the magnetic screen. The highest magnetic field may reach 15000gs . When the power is off , the magnetic coils have no residual magnetism in favor of eliminating iron.

Connector A , Thickness :2.0mm , width:97 mm, height :46mm, hole space: 76mm , finish: galvanized zinc ,
packing :300pcs/ctn. high quality , low price products

Good furniture material limited

Monel 404 is a copper-nickel alloy that has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. The alloy also has low permeability and good brazing properties, low magnetic induction, and high strength.
Application fields:
Monel 404 is mainly used in chemical and petrochemical and marine development and other fields. It can be used to manufacture various heat exchange equipment, boiler feed water heaters, petroleum and chemical pipelines, containers, towers, tanks, valves, pumps, reactors, shafts, etc.

We can provide the following the form:Monel alloy404 coil; Monel alloy 404 strip;Monel alloy 404 plate; Monel alloy 404 sheets; Monel alloy 404 tube; Monel alloy 404 pipe;Monel alloy 404 flat; Monel alloy 404 bar

UNS:N04404

custom printed Professional rubber hydraulic hose

Good quality with low price
Product details
Item Name Pressure hose
Colour Black
Thickness 1/4" 3/8" and other
Length 5m/90m/15m and so on
Material Rubber or PVC
Product Keywords custom printed Professional rubber hydraulic hose

Factory equipment:
Automatic constant temperature mouth rinsing: 1set
Built-in hand piece water purification system: 1set
Deluxe rotary spittoon: 1set
Strong/weak saliva ejector: 1set
Luxury motor chair (Self-regulation): 1set
Motor dental chair control system (three memory): 1set
Dental cold light: 1set
3-way syringe (cold/hot water): 1set each
Low-voltage X-film viewer: 1set
Multifunctional 4-hole pedal switch: 1set
Dental chair: 1 set .

Options:
Imported 4hole high Speed air turbine hand piece
Imported 4hole low Speed air turbine hand piece
Endoscopes system
Scalar
Curing light.


Technical parameter:
Power supply Voltage: AC220V 50Hz
Motor Voltage: DC24V
Air source Pressure: 0.5MPa-0.8MPa
Water source Pressure: 0.2MPa-0.4MPa.

Low speed handpiece
Specifications/advantages:
Adjustable r.M.P up to 22, 000
Operating air preassure 29 to 40 psi
Low noise, vibration free
Fullu autoclavable
Lighrweight
Forward & reverse drive
Can us the air motor with any iso
E-type contra angle
Long life cycle

304L stainless steel is a low-carbon variation of the widely used 304 austenitic stainless steel alloy. It contains approximately 18% chromium and 8% nickel and is characterized by its good corrosion resistance, high-temperature strength, and excellent weldability. The "L" in its name stands for low carbon, indicating that it has a lower carbon content than standard 304 stainless steel.
The low carbon content of 304L stainless steel provides it with improved resistance to intergranular corrosion and improved weldability, particularly in applications where it may be subject to sensitization, which can cause intergranular corrosion in certain environments.
304L stainless steel is commonly used in applications that require good corrosion resistance and high-temperature strength, including chemical processing equipment, food processing equipment, and heat exchangers. It is also used in architectural trim, dairy and brewery equipment, and pharmaceutical processing equipment.
In terms of mechanical properties, 304L stainless steel has a minimum tensile strength of 485 MPa (70 ksi) and a minimum yield strength of 170 MPa (25 ksi), making it suitable for use in applications where high strength is required. Its elongation is typically around 40%, which allows it to be formed and shaped without cracking or breaking.
304L stainless steel can be easily formed and fabricated using a variety of techniques, including cold and hot working, machining, and welding. It can also be polished and finished to achieve a variety of surface textures and appearances.
Overall, 304L stainless steel is a low-carbon variation of the widely used 304 stainless steel alloy that offers good corrosion resistance, high-temperature strength, and excellent weldability, making it a versatile material for a wide range of applications.
American Standard: ASTM A240/A240M-20a
European Standard: EN 10088-2:2005
Japanese Standard: JIS G4304-2005
Chinese Standard: GB/T 3280-2015
Indian Standard: IS 6911:2017
Here are some of the most common international standards for 304L stainless steel:
ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes
ASTM A312/A312M: Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
ASTM A479/A479M: Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
JIS G4304: Hot-rolled stainless steel plate, sheet and strip
GB/T 3280: Cold rolled stainless steel plate, sheet and strip

We can provide the following form:304L stainless steel coil/strip/plate/sheets/tubes/pipe/flat/bar

Model Name: PV3000 LMPK Low Frequency Off grid solar inverter
Input voltage: 24V/48V
Output voltage: 100V/110V/120V
Output current: 60A
Output Power: 1 - 200KW
Application: solar inverter 3kw inverter system
Certificate: CE/IEC
Output Current: MAX 100A
MOQ:10PCS

With over 20 years of R&D sophistication, Polar-Chiller has been a national market leader in the dehumidifying industry. Polar-Chiller Industrial Dehumidifiers are widely used in various fields. E.g. Normal space dehumidifying or material dehydration; Be it in a high or low temperature working environment, entailing moisture-proof & rust-proof production process, Polar-Chillier Industrial Dehumidifier series has a model that best suits your varying dehumidifying requirements.

Product Features
Utilizes industrial-grade thickened brass, sheet metal, industrial dedicated heat sink. Heat exchangers are made of copper, aluminium or stainless steel.
Manual or automatic control with double protection, ensuring uninterrupted operation.
2 control options: A) stand-alone mechanical control, using USA branded humidity controller; B) microcomputer control & LCD display of temperature and humidity using top-brand humidity sensor. All control and protection components are operated with independent, secure components. Reliability and durability are highly fulfilled.
Equipped with high-performance protective device, the dehumidifier can operate in low or high temperature and high humidity environment. Polar dehumidifiers still outperform at 10 , and function exceptionally well at a temperature as low as 5 .
Non-stop performance during defrosting with Dual-mode control.
Refrigerant: R-22 ï¼?Also available are R407C/R134a/R410a/ R404a
Excellent protection: Time Delay, Overload Protection, Automatic Humidity Control, Automatic Defrost, Pressure display & Control, Temperature Protection, Overload Protection, and Error Display, etc.

Application Areas
ROOM DEHUMIDIFICATION
Polar-Chillier dehumidifiers function well at such venues as workshop, laboratory, storeroom, warehouse, swimming pool, machine room, filing room, library, bank safe, rooms installed/ stored with electronics, semiconductors, precise scientific apparatus, medicinal herbs, etc.
DEHYDRATION/ DRY STORAGE OF PRODUCTS AND RAW MATERIALS
The crude materials need to be dehumidified or stored in a dry room such as the food, the chemical, the marine product, the farm products, the printed matter, the crude drug, the lumber, the furniture, the paper, the polyester fibre and so on.
OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFICATION IN THE PROCESS

Low-Temperature Dehumidifier
Suitable to roomage dehumidify, dampproofed and materiel universal temperature dry.
Use temp 10 -25
With strong wind. Based on the load, it can regulate automatically.
Power source: 1 220V 50(60) HZ(8 L/h)
3 380V 50(60) HZ(8 L/h)
Dehumidify capacity 2L/h 100L/h

Inconel nickel alloy
It is a solid-solution strengthened nickel-based deformed superalloy with molybdenum and niobium as the main strengthening elements. It has excellent corrosion resistance and oxidation resistance. It has good tensile properties and fatigue properties from low temperature to 980 �° C, and is resistant to salt spray. Stress corrosion in atmosphere. Therefore, it can be widely used in the manufacture of aero-engine parts, aerospace structural parts and chemical equipment. The alloy has good processing and welding properties, and can supply a variety of plates, bars, pipes, wires, strips and forgings