Find Verified Controlled Release Fertilizers Suppliers, Manufacturers and Wholesalers

LV-50B Automatic Scrubber Dryer
Accessories: Control panel; Squeegee guard brush; Squeegee

Features
An indispensable electric cleaning machine that makes heavy floor cleaning easy.
Ergonomic design with a quick and convenient brush deck loading system.
Adjustable curved squeegee picks up water more cleanly.
Large-capacity tanks, a sturdy and durable chassis and a simple control panel.
Ideal for large plazas, supermarkets, airports, factories, warehouses and other
surfaces.
Technical Specifications
Item Value
Model LV-50B
Working time Lead-acid battery 4H, lithium battery 5H
Voltage 24VDC
Squeegee width 800mm
Current 46A
Battery set 2x12V/100Ah
Power 1000W
Charging time 7h
Brush deck diameter 20" (510mm)
Battery size 330x180x220mm
Cleaning efficiency 690-1610 m2/h
Fresh water tank capacity 50L
Floor brush motor 24VDC/550W
Waste water tank capacity 55L
Scrubbing speed 165 r/min
Net weight 150kg
Cleaning width 510mm
Gross weight 168kg
Suction motor 24VDC/450W
Packing size 1280x550x980mm
Suction power 180mbar
Configuration Floor brush, pad holder, squeegee, battery 2, charger

Factory equipment:
Automatic constant temperature mouth rinsing: 1set
Built-in hand piece water purification system: 1set
Deluxe rotary spittoon: 1set
Strong/weak saliva ejector: 1set
Luxury motor chair (Self-regulation): 1set
Motor dental chair control system (three memory): 1set
Dental cold light: 1set
3-way syringe (cold/hot water): 1set each
Low-voltage X-film viewer: 1set
Multifunctional 4-hole pedal switch: 1set
Dental chair: 1 set .

Options:
Imported 4hole high Speed air turbine hand piece
Imported 4hole low Speed air turbine hand piece
Endoscopes system
Scalar
Curing light.


Technical parameter:
Power supply Voltage: AC220V 50Hz
Motor Voltage: DC24V
Air source Pressure: 0.5MPa-0.8MPa
Water source Pressure: 0.2MPa-0.4MPa.

The Machine is mainly used for polishing and drawing the surface of round stainless steel pipe in large quantity. It offers economic solution for bright/mirror finishing of tubes using flap wheels, sisal wheels or buffs.

Structures:
Round Pipe/Tube Polishing Machine: Off line
Forward convey table & stacking racket
Polishing machine
Backward convey table & stacking racket
Electric control system
Manual polish stick or automatic spraying the wax apparatus
Unloading shelf

Automatic production line: feeding, polishing (flap wheels, sisal wheels, cloth wheels, wind cloth
wheels) plus polishing wax, and discharging.

Advantages:
easy to replacing polishing materials, saving working hours;
easy and simple operation;
reliable quality and reasonable price;
environmental friendly
shiny and smooth effect help to increase economic benefit & additional values for the finished product

The machine is mainly used for polishing and drawing the surface of square, rectangle and special shaped stainless steel pipes and tubes in large quantity. It offers economic solution for bright/mirror finishing of tubes using flap wheels, sisal wheels or buffs.

Structures:
Square Pipe/Tube Polishing Machine: Off line
Forward convey table & stacking racket
Polishing machine
Backward convey table & stacking racket
Electric control system
Manual polish stick or automatic spraying the wax apparatus
Unloading shelf

Automatic production line: feeding, polishing (flap wheel, sisal round, cloth round, wind cloth round)
plus polishing wax, and discharging.

Advantages:
easy to replacing polishing materials, saving working hours;
easy and simple operation;
reliable quality and reasonable price;
environmental friendly)
shiny and smooth effect help to increase economic benefit & additional values for the finished product

The machine is manufacturing industrial stainless steel pipes/tubes widely applied in mechanical structure, auto parts, paper, petrol, medical use, refrigeration, chemical, food and beverage handling equipment, heating elements/heat exchanger etc.

Structures:
Single side/double side uncoiler
Strip butt welding equipment: manual welding table or shear and butt welding machine
3-stage roller tube making machine
Forming section
Welding section
Sizing section
Cooling section
Weld bead grinder
Equipment for inside weld bead control (Optional )
In-line bright annealing equipment (Optional)
Auto-cut off
Run out table
Electric control system
TIG welding machine + cooling equipment/ Plasma welding machine + cooling equipment
Unloading shelf
Rolls made of SKD-11

Automatic production line: the uncoiling, forming, welding, grinding, inside weld bead leveling, outside
weld bead grinding, sizing, bright annealing, straightening,, testing, letter spraying, fixing length, cutting,
collecting. It can be done at one time.

Advantages:
a. Our machines are manufactured from finest materials. Steady, durable and long lifetime.
b. Automatic control, safe and easy to operate.
c. Easy to replace the molds, save working hour and increase efficiency.
d. Low noise.
e. The machine and make different type of stainless steel pipe/tube which are round, square, rectangle
type of pipe/tube

The machine is manufacturing industrial stainless steel pipes/tubes widely applied in mechanical structure, auto parts, paper, petrol, medical use, refrigeration, chemical, food and beverage handling equipment, heating elements/heat exchanger etc.

Structures:
Single side/double side uncoiler
Strip butt welding equipment: manual welding table or shear and butt welding machine
3-stage roller tube making machine
Forming section
Welding section
Sizing section
Cooling section
Weld bead grinder
Equipment for inside weld bead control (Optional )
In-line bright annealing equipment (Optional)
Auto-cut off
Run out table
Electric control system
TIG welding machine + cooling equipment/ Plasma welding machine + cooling equipment
Unloading shelf
Rolls made of SKD-11

Automatic production line: the uncoiling, forming, welding, grinding, inside weld bead leveling, outside
weld bead grinding, sizing, bright annealing, straightening,, testing, letter spraying, fixing length, cutting,
collecting. It can be done at one time.

Advantages:
a. Our machines are manufactured from finest materials. Steady, durable and long lifetime.
b. Automatic control, safe and easy to operate.
c. Easy to replace the molds, save working hour and increase efficiency.
d. Low noise.
e. The machine and make different type of stainless steel pipe/tube which are round, square, rectangle
type of pipe/tube

The machine uses frequency controlling technology which is programmable.lt controls machine by torching the screen,it can timing smoothly,weace with highspeed and show all brekdown automatically.Meanwhile it has low noises,strong reliability and good wearability.The spindle has automatcally tension controlling mechanism,automatic lubricative system and safe fire fighting cover.This kind of machine can weav enot only copper wires but also other metal wires,such as MgAL,alloy wires,stainless steel,and so on.The Volume of the spindle of this machines,while being loaded to capacity,it can be loaded to 1.5Kilogram comparing with other kinds of machines,this machine doesn't need change springs but to slightly tune the springs tension when changwe different specificationwires

This kind of machine uses high technologi-cal frequency conversion control and controlling technology of SCM.ot can timing smoothly,braid with high speed and show all breskdown automatically.Meanwhile,it has low noises,strong reliability and good wearability.The spindle stand has automatic lubricative system and safe fire fighting cover.This kind of machine can braid not only copper wires but also other metal wires,such as Mg-AL,alloy wires,stainless steel,and wo on .The Volume of the spindle of this machine is large,while being loaded to capacity,it can be loaded to 1.5 kilogram,comparing with otherkinds of machines,this machine doesn't need change springs but to slightly tune the springs tension when change different speci-fication braiding wires.

VIPHONYA (ROYAL METAL) professional manufacturer from Foshan, China (est. 2014). Product: VIPHONYA ROYAL METAL Stainless Steel Dual-Zone Cigar Cellar 142L Compressor Refrigerator Temperature Humidity Control. Price: $1,099-1,199 FOB. MOQ: 1 square meter. Material: stainless steel (304/316) & glass. OEM/ODM custom size & design accepted. SGS & CE certified. Keywords: wine cellar, dual zone, temperature humidity control, compressor refrigerator, cigar cellar.

1.Three steps temperature control to ensure the temperature stable of inside furnace.
2.Fast increasing the temperature with thermostat control to keep the set temperature stable.
3.Stable wire guide system and rapid ceramic guide rollers to increase tinning efficient and ensure excellent in quality.

Shell plastic + inside EO class board + with bluetooth+ lighting+ wireless remote control.

The machine have the following features:
1.Compact machine and small dimension.
2.This annealer can be combined with wire drawing machine extruding line,increasing efficient, saving manpower and saving energy.
3.Annealer method:SCR control,three phase.
4.Voltage adjustment:to control the annealed degree to ensure the good quality of the wire.
5.With an accumulator to prevent machine stopped during reel changing.

Overview
In-line Bright Annealing Equipment is mainly used to in-line anneal AISI 300 and AISI 400 stainless steel
pipe. The annealing process is completed under a controlled atmosphere (Pure Hydrogen) in order to
assure the brightness of the surface and to re-gain the natural hardness of the material before forming
and welding. Tube straightening is not required after the process.
In-line bright annealing equipment is based on Mosfet and IGBT transistor technology, and is available
with output frequencies ranging from 10-400kHz and output power from 50-500kW according to
requirements. It is used for continuous bright annealing, in a controlled atmosphere (pure hydrogen,
while argon is utilized to flush the unit) of stainless steel welded pipes.
This type of equipment is generally installed on weld lines that utilise the TIG or laser method and it
enables continuous annealing and allows the surface of the pipe produced to be cleaned and polished.
The pipe is heated to a temperature of approximately 1,200°C and is then conduction-cooled so that
large volumes of gas are not made to circulate. The equipment is supplied complete with gas
management system, inductor, cooling tunnel, mobile support, equipment cooling system, temperature
control system and control panel.

Overview
In-line Bright Annealing Equipment is mainly used to in-line anneal AISI 300 and AISI 400 stainless steel
pipe. The annealing process is completed under a controlled atmosphere (Pure Hydrogen) in order to
assure the brightness of the surface and to re-gain the natural hardness of the material before forming
and welding. Tube straightening is not required after the process.
In-line bright annealing equipment is based on Mosfet and IGBT transistor technology, and is available
with output frequencies ranging from 10-400kHz and output power from 50-500kW according to
requirements. It is used for continuous bright annealing, in a controlled atmosphere (pure hydrogen,
while argon is utilized to flush the unit) of stainless steel welded pipes.
This type of equipment is generally installed on weld lines that utilise the TIG or laser method and it
enables continuous annealing and allows the surface of the pipe produced to be cleaned and polished.
The pipe is heated to a temperature of approximately 1,200°C and is then conduction-cooled so that
large volumes of gas are not made to circulate. The equipment is supplied complete with gas
management system, inductor, cooling tunnel, mobile support, equipment cooling system, temperature
control system and control panel.

Overview
In-line Bright Annealing Equipment is mainly used to in-line anneal AISI 300 and AISI 400 stainless steel
pipe. The annealing process is completed under a controlled atmosphere (Pure Hydrogen) in order to
assure the brightness of the surface and to re-gain the natural hardness of the material before forming
and welding. Tube straightening is not required after the process.
In-line bright annealing equipment is based on Mosfet and IGBT transistor technology, and is available
with output frequencies ranging from 10-400kHz and output power from 50-500kW according to
requirements. It is used for continuous bright annealing, in a controlled atmosphere (pure hydrogen,
while argon is utilized to flush the unit) of stainless steel welded pipes.
This type of equipment is generally installed on weld lines that utilise the TIG or laser method and it
enables continuous annealing and allows the surface of the pipe produced to be cleaned and polished.
The pipe is heated to a temperature of approximately 1,200°C and is then conduction-cooled so that
large volumes of gas are not made to circulate. The equipment is supplied complete with gas
management system, inductor, cooling tunnel, mobile support, equipment cooling system, temperature
control system and control panel.

In-line Bright Annealing Equipment is mainly used to in-line anneal AISI 300 and AISI 400 stainless steel pipe. The annealing process is completed under a controlled atmosphere (Pure Hydrogen) in order to assure the brightness of the surface and to re-gain the natural hardness of the material before forming and welding. Tube straightening is not required after the process.

In-line bright annealing equipment is based on Mosfet and IGBT transistor technology, and is available with output frequencies ranging from 10-400kHz and output power from 50-500kW according to requirements. It is used for continuous bright annealing, in a controlled atmosphere (pure hydrogen, while argon is utilized to flush the unit) of stainless steel welded pipes.

This type of equipment is generally installed on weld lines that utilise the TIG or laser method and it enables continuous annealing and allows the surface of the pipe produced to be cleaned and polished. The pipe is heated to a temperature of approximately 1,200 C and is then conduction-cooled so that large volumes of gas are not made to circulate. The equipment is supplied complete with gas management system, inductor, cooling tunnel, mobile support, equipment cooling system, temperature control system and control panel.

1.Overview
Stainless steel welded pipe is superior to stainless steel seamless pipe in terms of material and mechanical properties, but the weld reinforcement of stainless steel welded pipe, especially the inside weld reinforcement control has always been a difficulty to be overcome by welding pipe industry. Though many manufactures tried inner blade or inner grinding device solution, the effect is not satisfied. This is the main impediment to further expend wider application in the welded pipe industry. Thus, in petroleum, chemical, nuclear power, boiler, food, pharmaceutical and other industries, stainless steel seamless pipe is still the mainly choice.

2. Our Equipment
The welding seam inside Leveling machines is composed of leveling frame, hydraulic and pneumatic systems, PLC fully automatic controlled electro-hydraulic pneumatic system, also including molds and rolling fluid circulation device.

3. Technical features
The principle of welding seam inside leveling machine is employing a built-in mandrel and roller, reciprocating rolling the stainless steel welded pipe automatically, by controlling the rolling strength and pass to level both inner and outer side of the welding seam , completely control the weld reinforcement to be flushed with the base material. Generally speaking, the technology is to achieve the seamless stainless steel welded pipe effect.

The machine is manufacturing stainless steel pipes/tubes widely applied in furniture, building construction, decorative, auto parts, domestic applications, bicycle, exhaust systems, chair, desk, windows, doors, handrails,....Etc.

Structures:
Single side/double side uncoiler
Strip butt welding equipment : manual welding table or shear and butt welding machine
3-stage roller tube making machine
Forming section
Welding section
Sizing section
Cooling section
Weld bead grinder
Auto-cut off
Run out table
Electric control system
TIG welding machine + cooling equipment/ Plasma welding machine + cooling equipment
Unloading shelf
Rolls made of SKD-11

Advantages:
a. Our machines are manufactured from finest materials. Steady, durable and long lifetime.
b. Cost effective, high return of investment.
c. Automatic control, safe and easy to operate.
d. Easy to replace the molds, save working hour and increase efficiency.
e. Low noise.
f. The machine and make different type of stainless steel pipe/tube which are round, square, rectangle
type of pipe/tube

The machine is mainly used for polishing and drawing the surface of round stainless steel pipe in large quantity. It offers economic solution for bright/mirror finishing of tubes using flap wheels, sisal wheels or buffs.

Structures:
Round Pipe/Tube Polishing Machine: In line & Off line
1.Forward convey table & stacking racket
2.Polishing machine
3.Backward convey table & stacking racket
4.Electric control system
5.Manual polish stick or automatic spraying the wax apparatus
6.Unloading shelf

Automatic production line: feeding, polishing (flap wheels, sisal wheels, cloth wheels, wind cloth wheels) plus polishing wax, and discharging.

Advantages:
easy to replacing polishing materials, saving working hours;
easy and simple operation;
reliable quality and reasonable price;
environmental friendly
shiny and smooth effect help to increase economic benefit & additional values for the

Foshan Viphonya Stainless Steel Product Co., Ltd. is a professional manufacturer of premium stainless steel wine cellars, wine cabinets, wine coolers, wine racks and custom bar furniture since 2014. This VIPHONYA Home Wine Cabinet ROYAL METAL Niche is designed for built-in niche installation, bringing a hotel-style wine display into the modern home. The cabinet features a sturdy SUS 304 stainless steel frame with a tempered glass door, cool LED lighting and adjustable solid wood shelves. It is a wall mounted wine storage solution that saves floor space while presenting bottles elegantly. Temperature humidity control keeps every bottle in perfect condition. This wine storage cabinet suits living rooms, dining areas and home bars, and the elegant metal finish complements any interior. OEM/ODM accepted, custom sizes and designs available. MOQ from 1 unit, production 15-25 days. Our factory covers 3,800 square meters with 23 skilled workers, CE certified, export markets: USA 40%, UK 34%, Israel 9%, Australia 9%. Annual capacity 30,000 units.