Moreover, our factory has built full set of the product quality inspection system to control each working procedure in the production process according to ISO 9001 quality guidelines.
1). NiMH AAA 750mAh 1.2V
2). High energy density
3). Low self-discharge
4). Long service life
5). Chargeable up to 500 or 1000 times
6). Excellent performance of high rate charge and discharge
7). Low internal resistance
1). NiMH D 8000mAh 4.8V
2). High energy density
3). Low self-discharge
4). Long service life
5). Chargeable up to 500 or 1000 times
6). Excellent performance of high rate charge and discharge
7). Low internal resistance
1). NiMH SC 2400mAh 24V
2). High energy density
3). Low self-discharge
4). Long service life
5). Chargeable up to 500 or 1000 times
6). Excellent performance of high rate charge and discharge
7). Low internal resistance
1). NiMH 4/3D 13000mAh 1.2V & NIMH D 9000mAh 1.2V
2). High energy density
3). Low self-discharge
4). Long service life
5). Chargeable up to 500 or 1000 times
6). Excellent performance of high rate charge and discharge
7). Low internal resistance
1. High-efficient light power conversion, save 35%-50% power than T8 lamp.
2. 10-20% higher brightness than T8 lamp.
3. Starting voltage is as low as 160V. The worked voltage scope is 160-245v.
It works even with insufficient voltage or in freezing place.
4.Power factor is over 0.99, low harmonic wave and low wave peak ratio can extend lamp longevity effectively.
5. Color temperature is 6400k, good color-rendering, closer to natural light.
6. High frequency, low frequency flicker, so light pollution is eliminated and eyes are protected.
7. Easy conversion on traditional T8 magnetic lamp for energy saving, no professional staff is required.
8. Patented design of nice and easy plug-in structure; no need to change the existing lamp and circuit. It should take less than 2 minutes to convert a lamp.
9. Lower heat emission so fire prevention is enhanced and air-conditioning power cost is lowered.
10. Its longevity is longer than 10,000 hours; the lamp's longevity is longer than 6,800 hours.
Type: utp-5e hsbtyv-5e 4*2*(7/0.203)
Structure:
Conductor: stranded o.F.C bare copper 7/0.203(mm);
Insulation: hdpe ª¦0.98(mm);
Jacket: flame retardant red or grey or blue or green or yellow pvc nom o.D.5.60 (mm);
Standard: yd/t1019 2001;
Application: work area twisted pair cable for digital communication application, also known as equipment twisted pair cable, is used for the wiring between telecom lead-outs and equipment in the building and residence comprehensive system. Meeting meets the requirements of 155mhz for transmittance performance, the cable uses multi-core stranded copper conductor so as to increase flexibility. Ití»s connected in t568b manner (rs-45 8p8c connector), with standard distance below 10m.
*Full plastic design, more lighter & economical;
*Spring-clip design faceplate, compact body structure with strong flexibility;
*Easy to dismantle, assemble & clean;
*Centrifugal blades, high-speed motor, and vortex channel low noise;
*Space and electricity saving;
*Durable motor with build-in thermal fuse
*8",10",12" for option
MTT series on-line intelligent digital UPS congregates the essence of Baykee technology and entirely broke the bottleneck technology in traditional simulation circuit era. It adopts the digital control technology, of which the core is high-speed MCU and CPLD and takes the sixth generation low-exhaust and big-power IGBT and static switch as power components. Guided by these most advanced technologies in the world, it is really the first class product
MTT series UPS also adopt 4 layer PCB and larger power. The capacity can be from 10~400KVA, widely applied in the telecommunication, bank, stock exchange center, transportation, electricity, industry etc.
B) Six technologies crystallization which breaks the profession power limitation
Full digital control system
Advanced digital electric circuit system and super stability
MTT series on-line intelligent digital UPS congregates the essence of Baykee technology and entirely broke the bottleneck technology in traditional simulation circuit era. It adopts the digital control technology, of which the core is high-speed MCU and CPLD and takes the sixth generation low-exhaust and big-power IGBT and static switch as power components. Guided by these most advanced technologies in the world, it is really the first class product
MTT series UPS also adopt 4 layer PCB and larger power. The capacity can be from 10~400KVA, widely applied in the telecommunication, bank, stock exchange center, transportation, electricity, industry etc.
B) Six technologies crystallization which breaks the profession power limitation
Full digital control system
Advanced digital electric circuit system and super stability
í(Intelligent battery management
MTT series UPS brings in advanced intelligent battery management system. This system will automatically adjust battery charge parameters according the userí»s battery configuration, and can achieve batteryí»s float and boost conversion, temperature compensation and battery charge& discharge management according to the power supply environment.
Provides intelligent detection for whole process.
The system microprocessor will continuously detect on line all powerí»s supply working status, breaker status, and all circuits working status. Any failure occurs, the detecting system will immediately alarm to the runner, while synchronously starting-up UPS protection function.
Provides intelligent communication for long-distance monitor
1. RS232 and RS485 interface realizes multi-communication and long distance monitor.
2. The choice SNMP card 100% carries out long distance supervision and network management;
3. The choice dry contact connection, adopting non source contact, efficiently carries out the supervision and control of the UPS status.
High precision SMD technology
MTT series UPS replaces traditionally insert electric circuit processing with high precession SMD technology. This innovation not only save the space but also drastically eliminate the distortion of insert components in traditional UPS circuit. Whatí»s more, it ensures the integrate circuit a safe operation and enhances its reliability & operation precision.
MTT series UPS, widely using SMD technology, is heat-resistant, highly accurate and also has an excellent filter, which greatly improves the whole performance of the UPS. It is more durable and its lifetime is prolonged by 80%.
Sixth generation IGBT, the high-speed static switch and higher reliability
High-speed switch feature of IGBT; High voltage and large current; adopting voltage drives, only needs little control power. With much lower saturation voltage, the inverter AB working efficiency much higher temperature lower, more reliable.
Ultra-clear interface information processing technology makes communication between human and machine smooth.
It provides humanized big screen LCD in both Chinese and English, intuitive view of intelligent icon status of the flow chat, tabular data, events records and menu operation in both Chinese and English.
It provides clear intuitive view for the LED work state and work flow.
Decisive environmental protected and economized technique
According to the scientific life cycle evaluation, the MTT series adopts the touch screen whose anti-aging function is excellent and the Cabinet external appearance which is fluorine carbon craft processed, which is environment protected and durable, It adopts dismountable modularized design which is easy to protect and save the resource, and new type of vortex fan who has a excellent performance of radiation and energy conservation. It introduces NO-circumfluence control circuit which is excellently energy-saving and green commutate and athwart technology which can provide clear energy. Also it brings in advanced digital circuit and high pr¿ªcised SMD technology, which prolongs the UPSí»s lifetime by 80%.
C) Other functions
í( Superior load
It is completely capable to load from 0-100% while no need to change to bypass, which make sure the output reliable.
í( Perfect protection.
It has output over/low load protection, Input surge protection, phase sequence protection; battery over charge/discharge protection; short circuit protection; over-temperature protection and so on, as well as alarming function.
High dynamic performance.
Adopting kinds of feedback control such as instantaneous control method and valid date, it achieves high dynamic adjustment and reduces the output THD.
Phase-to-phase stabilizer Independent phase-to-phase control realizes the control of instant over-loading balance, so as to reach O/P 100% unbalance load.
Optional input harmonic filter and 12 pulse rectifier effectively restrain the input THD; Raise UPS input power factor, reduce the input THD current.
Optional battery detecting module able to test the single parameters, and display on the LCD. If battery failure it will alarm to runner.
