Features:
Widely applied in ground resistance measurement, loop resistance measurement
With optional function of RS232 interface data upload
No need to disconnect the ground wire from the ground net
Without auxiliary electrode
High accuracy and resolution
With data memory
Automatic power off
Specifications:
Clamp size: 65 x 32mm
Resistance range: 0.01 to 1,200ohm;
With automatic shifting
Resistance resolution: 0.001ohm;
Data memory: 99 sets
Alarm setting: 1 to 199ohm; and buzzer alarm
Quick boot: in 0.5 second
With lower consumption.
1.Available for encoding, and for setup of the address for each DMX512 decoder module (SC-DMX-00xH/L) of own company;
2.Available for one-time setup of different addresses for the DMX512 control system consisted of by SC-DMX-00xH/L(DMX-512 decoder module) of own company;
3.Available for transmission single and multiple channel DMX512 signal;
4.Available for scene function, and for independent setup of DMX512 Start code and value of each channel;
5.Support transmission of DMX512 testing signal by 40Hz or 20Hz;
6.Available for receiving DMX512 signal and for separate display of 512 channels and their respective Start code.
A. Introduction:
This device applies to lighting equipment , low voltage electric appliance, household appliances, electric appliances , electric tools ,electronic instruments, electrical instruments , information technology research and production and quality department, also suitable for insulation materials , engineering plastic . electrical connectors, auxiliary parts industry.
B. Standards: IEC60112, GB/T 4207, UL746A .
C. Main parameters:
1. Testing chamber size :60cm*95cm*90cm (DxHxW) . 0.5M³.
2. Testing voltage : continuously adjustable during 100-600V, digital display.
3. Electrode :2 piece of platinum electrodes, 2mm*40mm*5mm (DxHxW). 30 inclined plane .
4. Distance between electrodes : 4.0mm.
5. Droplet equipment : interval time of droplet is adjustable
6. Pressure on surface :1.0
7. Max electricity : 3A
8. Outsize :61cm(D)x120cm(W)x105cm(H).
DTDL-8110 Cablefault Test Set is an integrated set of Cablefault Detection
and Location Devices. It is applicable for many types of power cable,
communication cable and optical cable. It can accurately measure the distance
of cablefault and locate the fault point.
The system includes:
1) DTDL-8110 Mainframe.
2) DTDL-8032R Receiver.
3) RF Inductive Tracking Rod.
4) Potential Difference Locating Rack with 2 pins.
5) AF Stethoscope and Headphones (for Listening mode).
6) Grounding Pin.
184 Electronic Testers Suppliers
Short on time? Let Electronic Testers sellers contact you.
Parameters WEW-100
Accuracy 1% of indicated value
Measuring range of force(kN) 2-100kN
Subsection of force 1,2,5,10
Accuracy of deformation measurement 0.5%F.S
Clamping diameter for round specimen(mm) ;6-22
Clamping width of flat specimen(mm) 40
Clamping thickness of flat specimen(mm) 0-15
Testing space Tension 550
Compression 500
Platen size 100
Distance of bending by pass roll(mm) 30-400
Piston stroke(mm) 250
Power supply : 50Hz
Working environment Room temperature : relative humidity
Overall dimension(mm) Frame machine730x500x2000
Control System 1070x810x1730
Weight(Kg) 1370
Digital control hydraulic compression testing machine
1. Maximum Testing Load: 600kN
2. Measuring Range of Load: (24-600) kN
3. Accuracy of Testing Load: 1%
7. Distance between Upper and Lower Platen: 225mm (Adjustable)
8. Size of Upper Compression Platen: 180mm
9. Size of Lower Compression Platen: 250mm
10. Piston Ram Stroke: 150mm
11. Power Supply: three phase, 380/220V;50/60Hz
12. Working Environment: 80%
his series testing machine is suitable for tensile, compression, bending, shearing, peeling and tearing test of metal and nonmetal materials, such as rubber, plastic, electrical wire and cable, composite, profiled bar, bar metal, board, spring, components and so on. It confirms to ISO 75001ú¼ASTM A370, ASTM E4 ASTM E8 and JIS, DIN, BSEN testing standards.
AD800 in this machine is whole digit multi center closed loop measuring and control system. It adequately absorbs advanced functional characteristics and integrates the latest international professionally developed measuring and control system. Control software can automatically finger out routine data, such as tensile strength, yield strength, modulus of elasticity, extend rate after rupture, non-proportional extend strength RP0.2, etc. It can adopt many
kinds of controlling modes, such as constant force, constant displacement, constant deformation, and real time display many testing curves of force-displacement, force-time, stress-strain.
These curves automatically switch. Testing process control and data processing conform to the requirements of International standards. This machine is beautiful, multifunctional, safe and easy.
Parameters: WDW-1 WDW-2 WDW-5
Maximum force: 1KN 2KN 5KN
Accuracy: í_í+1% (0.5% as special order)
Measuring range of force (KN): 0.2%--100%FS
Resolution of force: 1/200000 of maximum force and no subsection of all scale
Accuracy of displacement measuring: í+0.5%
Resolution of displacement: 0.03ª¦m
Speed adjusting range of displacement: 0.001-500mm/min
Accuracy of deformation measuring: í+0.5%
Range of deformation measuring: 2%í½100%FS
Speed adjusting range of force; 0.005-5%F.S / S
Speed controlling accuracy of force: ¿Qí+2.0% of the set value (speedú+0.05%FS/S)
¿Qí+0.5%/í+1.0% of the set value ( speed¿R0.05%FS/S)
Speed adjusting range of deformation: 0.005-5%FS/S
Speed controlling accuracy of deformation:¿Qí+2.0% of the set value (speedú+0.05%FS/S)
¿Q í+0.5% of the set value ( speed¿R0.05%FS/S)
Valid tension testing space: 800
Compression testing space: 700
Clamping sample: Flat and round sample
Power supply: 380V/220ú¼50/60Hz
Working environment: Room temperature 10íµí½30íµ, relative humidityí_80%
Base configuration : Panasonic servo motor, precision photoelectric encoder
Weight(Kg): 300
2m measurement
Hdb3 and ami line codes
Out-of-service 2mb/s, n*64kb/s ber testing
In-service framed and unframed double-channel testing
Pcm simulator''mode testing
Frame data control and monitoring
Timeslot activity monitoring, fas, n-fas, ts16mfo analysis
Built-in 64kb/s tone channel listen capability
Cas and ccs signaling generation and monitoring
Round trip delay measurement
Aps delay measurement
Extensive error and alarm generation
Vf tone generation and measurement
Level measurement
Pulse mask measurement
Jitter measurements to itu-t standard o. 172
Frequency and offset measurement
Clock slip measurement
Up to +/-999ppm transmit clock deviation
Clock source: internal, interface or external 2m clock/signal
Real-time transmit circuit open/short indication
TLD1500 Series is high quality of Optical Fiber Checker. It contains the most advanced laser technology and microelectronics technology, and can be measured with various fiber optic adapter with 2.5mm common Interface. It is very convenient for them to check the single-mode and multimode fiber.
Product Features;
Six Impact Devices are available for special applications(D,DC,D+15,C,DL,G)
Direct display of hardness scales HRB,HRC,HV,HB,HS,HL;
Software to connect with PC and Dataview for PC operation;
Automatic identification Impact Devices and test direction (Except G);
Software data and upperlower limits setting and sound alarm;
Time and date setting; auto-clock;
On-Board memory holds 240-1000 groups of data;
Integral thermal printer, print all test results and histogram;
For all metallic materials;
Li Battery , low voltage indication and sound alarm;
LCD with blue back-light, showing all functions and parameters;
Wide measuring range;
Long standby time and stable performance of field work;
Technical specifications:
Hardness Scale:HL,HRC,HRB,HV,HB,HS
Accuracy:í+4HLD(760í+20HLD) repeatability of displayed value
Standard Impact Device:D
limits set measuring range:(170~960)HLDD Optional Impact
Devices:C DC D+15 DL G
Operating Temperaturee:0~40
Statistics Function:Average Max Min calculation,limits setting and alarm
Testing direction:Automatic
Min.thickness of hardened:0.8mm
Chargeing time:3~5hours
Power:Li Battery 4.2V/1600mAh
Charger:5V/500mA
Overall Dimensions:147*69*23mm
Weight:186g
Computer Interface:RS232
Min.Workpiece thickness:5mm (D DC DL D+15)1mm (C)10mm (G)
memory:240~1000 groups
Min.Workipece Weight:2~5Kg on stable support 0.05~2Kg with compact coupling
Min.Radius of Workpiece:Rmin=50mm(with support ring Rmin=10mm) Max.Workpiece
Hardnesss:996HV (D DC D+15 DL C) 646HB (G)
Continuous Working Time:About 200hours
Six impact devices are available for special applications(d, dc, d+15, c, dl, g)
Direct display of hardness scales hrb, hrc, hv, hb, hs, hl;
Software to connect with pc and dataview for pc operation;
Automatic identification impact devices and test direction (except g);
Software data and upperlower limits setting and sound alarm;
Time and date setting; auto-clock;
On-board memory holds 240-1000 groups of data;
Integral thermal printer, print all test results and histogram;
For all metallic materials;
Li battery , low voltage indication and sound alarm;
Lcd with blue back-light, showing all functions and parameters;
Wide measuring range;
Long standby time and stable performance of field work;
Introduction
Dj-500p demagnetizer has the biggest demagnetizing surface at the flat demagnetizer. It is the leading level at the demagnetizer surface, power consumption and work efficiency in china.
It can produce a damping magnetic field.And it need not move the workpiece during demagnetizing.Based on fully taking into account demagnetisers reliability andstability , the design and special selection of materials make dj-500p type demagnetizer to be widely used.
Dj-500p demagnetizer do not pollute the powerline.Large parts, large devices (such as calipers, needles, screws, nuts, change knives, scissors, blade) can be demagnetized easily.
Major technical character
1. Application: magnetic metal parts and molds.
2. Demagnetized voltage (v): ~~ 380v
3. Demagnetized time (s): 2-5 s
4. Demagnetized area (mm): 500 ~{!a~} 500
5. Residual flux: <0.2mt (thickness<50mm)
6. Dimensions (mm): 1200 (l) ~{!a~} 700 (w) ~{!a~} 700 (h)
7. Weight (kg): 80 kg
8. Input power: ~~ 380v 50hz / 60hz
9. Power: <4000w
1.1 General introduction
APGK-307 is special instrument for power system GIS mechanical properties measuring. The instrument takes IPC for the core to sample and data process. It has 12.1 LCD to display and 12.1 touch pad for operation. Rich experience database makes the tester more intelligence. The tester has the characteristic of accurate test data, strong anti-jamming, easy operation, small size and light weight.
1.2 Functions
1. Measure opening and closing time, synchronism performance ,bounce time and bounce times of common and graphite GIS.
2. Measure distance, average speed and instantaneous speed of on and off of common and graphite GIS.
3 Finish test of continuous on and off of common and graphite GIS.
4. Measure coil current of common and graphite GIS.
5. Draw GIS state-time curve, current-time curve, distance-time curve and speed-distance curve.
6. Show 12 GIS port status of common and graphite GIS.
1.3 Technique index
1) Time measuring:
Number of ports of GIS measured :í_12
Range of the setting time during the measuring course: >100 seconds
Resolution: 0.01ms
2) Distance measuring:
Distance sample rules:0-3
Range: <250mm
Resolution: 0.01mm
3) Errors of measuring
Error of time measuring: í+1%
Error of distance measuring: í+1mm
4) Speed measurement range: 0í¬20m/s
5) The tester has 8G storage room, saves test data more than1000 groups
6) Power output:
Output voltage: DC 20Ví¬220V error: 1%
Output current: 0í½20A
7) Operating conditions:
Rated power supply: AC220Ví+10%, 50HZ
Power consumption: í_60W
Temperature of environment: 0~40íµ
Humidity of environment: í_90%RH
Size: 465mm*290mm*150mm
Weight: <10kg .
Wooden case
Size: 465mm*290mm*150mm
Weight: <10kg.
1.1Product Introduction
Apva-401 is a special instrument for testing characteristic of ct; the tester can finish ct transformation ratio test, ct polarity test, volt-ampere feature curve drawing and ct error drawing. It has large output, high precision, stable performance and automatic testing.
1.2 Funtion
1 ct transformation ratio test
2 ct polarity test
3 ct volt-ampere feature curve measurement
4 ct ratio error measurement
5 error curve measurement
6 result print
7 unload data to pc
8 pc online test .
1.1 Introduction
APVA-402 is a special instrument for testing characteristic of CT and PT .The tester can finish CT/PT transformation ratio test, CT/PT polarity test, volt-ampere feature curve drawing and CT error drawing. It has large output, high precision,stable performance and automatic testing.
1.2 Funtion
1 CT/PT transformation ratio test
2 CT /PT polarity test
3 CT /PT volt-ampere feature curve measurement
4 CT ratio error measurement
5 Error curve measurement
6 Result print
7 Unload data to PC
8 PC online test .
1.1 General introduction
APVA-403 CT analyzer is special tester for current transformer. It takes IPC as core to sample and data process. The instrument finishes CT tests based on different low frequency. It has 8.4 inches LCD to display and a 8.4 inches touch pad for operation. The tester has the characteristic of high precision, strong anti-jamming and easy operation.
1.2 Functions
1. Excitation curve, volt-ampere curve and error curve drawing
2. Second burden measurement
3. CT coil DC resistance measurement
4. CT transformation ratio test
5. CT phase polarity test
6. Automatically make WORD and EXCEL test report.
1.3 Technique index
1. transformation ratio test error<0.1%
2. voltage measurement error<0.2%
3. current measurement error<0.2%
4. output voltage0~110V AC
5. maximum current output 10A, instantaneous peak value 20A
6. 8G storage space, save test data more than 10000 groups
7. work condition
Power supply: AC220Ví+10 %/50Hz
Temperature: 0~40í¦C
humidity: í-90%RH
Size: 330óÑ240óÑ150 mm
Weight: <8kg
1.1 General introduction
APLB-601 is an instantaneous signal recorder used for kinds of industry. It takes IPC as the core to sample and data process. It has 12.1 LCD to show, touch pad for operation, strong anti-jamming and easy operation.
1.2 Functions
1. Sample isolation between channels completely.
2. The instrument software has waveform zoom, data statistics, spectrum transformer and wavelet transformer tools.
3. Lots of test template to make customers finish test rapidly.
4. All the data can be exported through U-disk or wireless network.
5. Automatic upgrade interface of the tester make it easy to get latest software package and test template.
6. 12.1 LCD to show, touch pad for operation.
7. Automatically makes WORD and EXCEL test reports.
1.3 Technique parameters
1. Analog signal sample channels:12
2. Optional stalls: -450V~450Vú¼-100V~100Vú¼~10V~10Vú¼-20mA~20mA
3. Sample error:
-450V~450V error<0.5V
-100V~100V error <0.2V
-10V~10V error <0.01V
-20mA~20mA error <0.02mA
4. Passive switch signal input interface:5
5. Work condition:
Power supply: AC220Ví+10 %
Frequency: 50Hz
Power consumption: í-60w
Temperature: 0~40í¦C
Humidity: í-90%RH
Size: 448óÑ260óÑ150 mm
Weight :<10kg.
Wooden case
Size: 448óÑ260óÑ150 mm
Weight :<10kg .
184 Electronic Testers Suppliers
Short on time? Let Electronic Testers sellers contact you.
