Find Verified Fan Impellers Regulators Suppliers, Manufacturers and Wholesalers

* Portable warm heater/cooler fan. Dual mode
* Humanized design: time control. Automatic power off with 4/8/12/24 hours
* High/Low power setting. High: 1900W Low: 1600W
* High temperature. Compact with low noise
* Aluminum-Titanium alloy metal
* Automatic power off when tilt 45 degree within 360 degree
* Shell is not hot and keep at room temperature except "air outlet"
* Dimension: 34x28x15cm

1. Usage: Cycling, fishing, mountain-climbing, jogging, searching etc.
2. It's a combination of head light for lighting and rear light for warning.
3. Accessories: Clip holder, Elastic strap and Rechargeable battery (9 hours working time)
4. Water resistance, thunder and lightning resistance (suitable for fog day)
5. The light patterns: White head light + rainbow flash rear light (Cool and shining)
6. Up/down angle adustable

* Modern fashion aluminum circular arc model with magnet bottom
* 360 degree warning lights. Two red and one white flash lights
* Topside flash light - 20W red flash light designed for rescue by helicopter
* Specifications:
Rated voltage: DC12V
Rated power: 6W
Wire length: 3 meters
Net weight: 0.5kg
Dimension: 110x110x110mm

* Spray will stop automatically after 30 sec. and restart again
* Penetrate into the basal cell layer of the skin with high efficiency
* Elegant appearance, low consumption
* USB charger
* Rated power: 2W, Rated Voltage: DC3.7V, Water capacity: 8ml , Mist particle 0.3~0.5um
* Measurement: 90x35x21mm
* Weight: 50g

* Earthquake: Auto alarm rings while shaking over 5 degrees (up, down, left, right)
the alarm will shut off after 20 minutes or manually shut off (the light still
works)
* Made by aluminum circular arc model
* Fire: Device will work as temperature sensor over 50 degree . It will shut down when the
temperature lower than 50 degree.
* The alarm is mainly used as escape, especially for reminder and try to wake up people
who are in heavy sleep
* Specification: 1.Rated power-4W/0.6A 2.DC 5V 3. dB/M 110dB 4. Net weight: 0.5kg
5. Dimension: 110x110x110mm

* Aluminum suitcase design
* Dimension: 36x24x10.5cm Net Weight: 4.0kgs
* With a 8 inches color LED display panel
* Time and intensity is adjustable
* 40KHz frequency is the most suitable frequency for human body

Shaft is a common type of CNC machining parts, comes with a rotating body, and its length is generally larger than the diameter. Shaft parts are widely used in various equipment to provide support, transmit torque and bear load, also can found in food industry, such as the mixer shaft parts. The main machining surfaces of food blender shaft are cylindrical surfaces and common special surfaces, the machining methods are selected based on the requirements of accuracy level and surface roughness. The length of the mixer shaft is mainly determined by the required position of the mixing impeller in the container, this is related to geometry of blender, such as size and height. Junying is a professional CNC machining company that specialized in turning, milling and more techniques, also capable of precision machining in various shaft parts, connector parts, custom parts, etc.

Origin: China
Type: Solar Inverter
Product certification: RoHS
Circuit topology: push-pull
Output voltage waveform: sine wave
Input voltage range: 125-580v (V)
Output voltage: 110V & 230V (V)
Output power: 5000 (W)
Inverter efficiency: 97.6%
Voltage regulation rate: 5%
Load adjustment rate: 5 (%)
Rated capacity: 5000
Output frequency: 50-60 (Hz)
Boundary dimension: 516 * 440 * 184mm
Maximum output power: 5500 (W)
Continuous output power: 5000 (W)

1)Dimension
a)25 x 25 x10mm b)30 x 30 x 10mm c) 40 x 40 x 10mm d) 40 x 40 x 20mm
e) 50 x 50 x 10mm f)60 x 60 x 10mm g) 60 x 60 x 15mm h) 60 x 60 x 20mm
i)60 x 60 x 25mm j)70 x 70 x 10mm k)70 x 70 x 15mm l)70 x 70 x 20mm
m)70 x 70 x 25mm n)80 x 80 x 15mm o)80 x 80 x 20mm p)80 x 80 x 25mm
q) 92 x 92 x 25mm r) 120 x 120 x 25mm
2) Rated voltage: DC 5V,12V,24V,48V
3) Type: ball bearing, sleeve bearing
4)Safety Approvals:CE TUV UL CUL CCC
5)Electric strength:1mAmax at 1000VAC for 1 min between lead wire and frame.
6)Insulation resistance:10M ohm between lead wire and frame(DC 500V)
7)Life expectancy(ball bearing):50,000hrs rain at 25 degree C relative humidity 65%+/-20%
8)Life expectancy(sleeve bearing): 30,000hrs rain at 25 degree C relative humidity 65%+/-20%
9)Operation temperature:-10 to 70
10)Storage temperature:-40 to 75
11)Lead Wire:UL1007(AWG18-30)
12)Protection:Motor protection and polarity protection
13)Plastic Material:Black PBT(UL 94v-0)glass filled
14)Frame:Plastic Impeller:Plastic
15)Function:Function type is optional


1)Dimension
a)25 x 25 x10mm b)30 x 30 x 10mm c) 40 x 40 x 10mm d) 40 x 40 x 20mm
e) 50 x 50 x 10mm f)60 x 60 x 10mm g) 60 x 60 x 15mm h) 60 x 60 x 20mm
i)60 x 60 x 25mm j)70 x 70 x 10mm k)70 x 70 x 15mm l)70 x 70 x 20mm
m)70 x 70 x 25mm n)80 x 80 x 15mm o)80 x 80 x 20mm p)80 x 80 x 25mm
q) 92 x 92 x 25mm r) 120 x 120 x 25mm
2) Rated voltage: DC 5V,12V,24V,48V
3) Type: ball bearing, sleeve bearing
4)Safety Approvals:CE TUV UL CUL CCC
5)Electric strength:1mAmax at 1000VAC for 1 min between lead wire and frame.
6)Insulation resistance:10M ohm between lead wire and frame(DC 500V)
7)Life expectancy(ball bearing):50,000hrs rain at 25 degree C relative humidity 65%+/-20%
8)Life expectancy(sleeve bearing): 30,000hrs rain at 25 degree C relative humidity 65%+/-20%
9)Operation temperature:-10 to 70
10)Storage temperature:-40 to 75
11)Lead Wire:UL1007(AWG18-30)
12)Protection:Motor protection and polarity protection
13)Plastic Material:Black PBT(UL 94v-0)glass filled
14)Frame:Plastic Impeller:Plastic
15)Function:Function type is optional

Product details:

A. Quick details:
Power: 26w
Voltage: 24V £¨Safer and more durable£©
Housing material: ABS
Certification: CE£¬FCC.

B. Specification
1. Size: 29*23*53cm
2. Weight: 3kg
C. Features:
1. Safer---no rotating blades as in a traditional fan.
2. More energy-efficient---half electricity consumption of a regular fan.
3. More user-friendly---remote controlled
4. High quality---Compliant with FCC&CE.
5. Competitive price.

Unique functions:
Remote controlled
Battery and electricity powered
Rechargeable
Timing function.


As customers` request.

Product Features

* Equipped with powerful, high-speed motor with 30,000 hours lifespan.
* With remote controller for comfort and ease of use.
* Long life LED light with 2 levels of luminosity for use in the dark.
* 10 degrees 2-way tilt with one touch.
* 90 degrees oscillation.
* Rotary switch to freely adjust airflow power.
* Power consumption: 35W.
* Cord length: 1.8m.
* Each gift box contains a unit base, an annular head, a remote controller and an instruction manual.

Product details
A. Quick details
Power:26w
Voltage: 24V
Housing material:ABS
Certification:CE, FCC.

B. Specification
1.Size: 29*23*53cm
2.Weight: 3kg
3.Voltage: 24V
C. Features:
1. Safer---no rotating blades as in a traditional fan.
2. More energy-efficient---half electricity consumption of a regular fan.
3. More user-friendly---remote controlled
4. High quality---Compliant with FCC&CE.
5. Competitive price.
D£®Unique functions:
Remote controlled
Battery and electricity powered
Rechargeable.

EA16 is the extension of EA15 product design, inherited the EA15 wide voltage detection range and power supply voltage, and enhanced the generator as the parallel performance when using parallel system, in addition to current compensation input by the user can choose 1A or 5A than CT input number, can be provided by the system to an analog signal change the terminal voltage of generator. EA16 in the protection of increase of over excitation voltage protection, the protection to prevent detection power disconnection and generator excitation is abnormal, the protection function can also be removed. EA16 / EA16-400Hz (detection voltage 400Hz) universal 16Amp parallel generator automatic voltage regulator compatible models: Marelli, Caterpillar, Khenkikian, Genaust and other brands of AVR

* this page AVR the name of the manufacturer, type is only for reference, this page product is not the original products, AVR products but consistent with the original products

Product features

Voltage regulation rate < ¡À 0.5%?

Application of VAC? 170~510 brushless generator

Can be used in parallel unit?

? 16 ADC output current

Application of 50/60 Hz? EA16 frequency, EA16-400Hz frequency of 400 Hz

? with low-frequency protection and voltage slow up function

? with load current compensation, analog voltage input function

Product specifications

The product model

EA16 / EA16-400Hz*

Detection of input

Voltage: 170~510 VAC single-phase two-wire

Frequency: 50/60 Hz

The frequency of *EA16-400Hz: 400 Hz

Power input

Voltage: 60~300 VAC single-phase two-wire

Field output

Voltage: 240 VAC input, 90 VDC

Current: continuous discontinuous 16A 20A for 10 seconds

Resistance: a minimum of 6 Ohm @ 35 VDC

The external voltage adjustment

¡À 0.5% (engine speed variation in 4%)

Voltage is established

In the AVR input terminal to remanence voltage above 5 VAC

The external voltage adjustment

With 2 K Ohm 1 watt potentiometer is ¡À 5%

Power consumption

A maximum of 10 Watt

Temperature stability

Every C change, 0.03% voltage drift

Low frequency protection

55 Hz @ 60 Hz, 45 Hz @ 55 Hz (adjustable)

*EA16-400Hz: 360 Hz (adjustable)

Current compensation input

1A or 5A (optional)

Analog voltage input

¡À 5 VDC ¡À 10% AC @ 3 VDC

Work environment

Operating temperature: -40~70 degrees C

The storage temperature: -40~85 degrees C

Relative humidity: 95%

Vibration: 3.3G @ 100~2 KHz

Characteristics of the adjusting knob

VOLT: adjusting voltage

STAB: adjust stability

U/F: adjust the low-frequency protection point

DROOP: adjust current compensation voltage drop

TRIM: analog voltage effect of ratio adjustment

Size




Unit Type:piece Package Weight:1.000kg (2.20lb.) Package Size:19cm x 18cm x 17cm (7.48in x 7.09in x 6.69in)

30V 5A Dc Regulated Power Supply

1380mm 50'' Exhaust Fan
Weight balance type exhaust fan (drop hammer type exhaust fan) features:
1. Mirror designed Stainless steel balde,with big air volume,never distortion and broken, the angle of the blades is patented designed
2. Galvanized steel sheet ,the layer of galvanizations more than 180 g/,one-off moled frame,
3. experiment of homeostasis make the blade work smoothly,nearly no noise and steadily output of air
4. Belt pulley are aluminium magnesium alloy injection moulded ,light and high-strength
5. Adopt auto belt-tensioner which can adjust the loose or tighten of belt and never drop
6. Imported france bearing with long service life

Pong bong sticks, cheering sticks, inflatable sticks
Material: PE
Normal size: 60 x 10 cm, thickness: 0.07 mm
Shape/multi-color/logo can be customized
With straw included for easy inflation
Printing: silk-screen printing, flex printing, offset printing, glossy/matt film lamination printing or others
Any length, width, height, depth can follow your design
Features: eco-friendly, high quality, prompt delivery, reasonable price
Color reference: pantone color card, CMYK standard
Attractive promotional item for, sport event, corporate advertisement, political rallies, music concerts, sales promotion, campaigns, and all kinds of athletic games

1. Electrical parameters: 16A 250V ; 20A 125V ;
2. Operating temperature range: 0 250 optional;
3. Electrical strength: 2000V 1min no breakdown, reliable product action altogether, do not pull the arc, long life, low radio interference, temperature control accurate;
4. Contact resistance: 50m;
5. Insulation resistance: 5M;
6. Leakage current: 0.25mA;
7. Rotary axis: torque 1.5N · m or more, the initial value of the test temperature within ± 1 ;
7. Life: 100,000 cycles;
8. Thermostat axis rotation angle: 0 ° to 310 ° optional;
9. Terminals: according to the actual needs of the customer ac households have 0.8 and 6.3 * 4.8 * 0.8, etc. in line with the national standard selection of terminals.
10. The UL.CUL, VDE, CE, TUV, CEMC, ROHS certification
adjustable high temperature thermostat Explanation:
1. Disconnect the thermostat and the temperature characteristic curve of the finished product and by customer thermostat matching test may be;
2. This product can be designed with an induction current to achieve the purpose of temperature control, and can greatly reduce the web temperature, remote temperature control, thermal compensation;
3. Installation according to customer requirements and design;
4. For the convenience of customers to install thermostat, thermostat while also staking a fixed mounting block (chip), but also has the function of heat conduction effect.
adjustable high temperature thermostat Precautions:
Ceramics, bimetal thermostats and other physical health should not be the role of external forces intact 1. Install;
2. The thermostat stacking layers stored in strict accordance with requirements and do affect product quality and other details of dust and moisture;

outer diameter of component will must be according to customer's drawing
material:according to customer's demand
delivery:delivery time including trial period 60days
spares:kuroda-chaoyang will give free 30% parts
services:for the first year,if the mould have any problem,kuroda-chaoyang need send engineer to customers factory to repair it,and kuroda-chaoyang engineer will teach customer engineer how to maintain it.

NTC Temperature Sensor for Electric Motor Temperature Detection EG-N018
NTC Temperature Sensor for HVAC & Motor Temperature Detection
The EG-N018 NTC Temperature Sensor is designed for fast and accurate temperature detection in HVAC systems and electric motors.
With a compact epoxy-encapsulated structure and rapid thermal response, this sensor is well-suited for applications requiring real-time temperature feedback and stable control performance.
As an experienced OEM manufacturer, we provide custom NTC temperature sensor solutions� tailored for air temperature sensing, motor protection, and embedded system integration.
Key Features
Fast response (~5s) suitable for dynamic temperature environments
Compact size (4 mm) for easy integration into tight spaces
Stable resistance performance for long-term operation
Wide operating temperature range up to 150�°C
High insulation resistance for reliable electrical performance
Suitable for both air temperature sensing and surface detection
Typical Applications
The EG-N018 is optimized for air temperature sensing and motor thermal monitoring, including:
Air conditioning room temperature detection (HVAC systems)
Electric motor temperature detection and protection
Air inlet / outlet temperature sensing in HVAC equipment
Fan coil units and thermostat systems
Motor windings and surface temperature monitoring
Industrial ventilation and environmental control systems
Its fast response makes it especially suitable for� systems requiring real-time temperature feedback and rapid control adjustment.
Custom NTC Temperature Sensor Solutions
As a professional OEM supplier, we support flexible customization for different applications:
Resistance value and B constant customization
Miniaturized probe design for compact installations
Cable length, insulation material, and shielding
Connector and terminal integration
High-temperature and moisture-resistant designs
Integration into HVAC systems or motor assemblies
We support projects from� sample development to mass production, ensuring consistent performance and reliability.

The standard heavy duty exhaust fan has a 1380 mm fan frame, with 6 blades, the blades and the frame are made from corrosion-resistant galvanized steel.

The standard fan is belt-driven by a 380 volt 1100W motor that has an airflow of 44500m³per hour, motor can be customized, it can also be made to be direct-driven.

We design and manufacture plastic injection molds auto parts, home applications, medical products, Household commodities, consumer electronics, mobile phone parts and accessories, and many other kinds of molds in different fields. portable electric fan protector cover plastic injection molding

HVLS industrial Fan is a super larger energy-saving fan with a diameter up to 7.3 meters (24ft), the airfoil blade, which are developed with the advanced technologies and principle of aerodynamics. A power of 1.5kw or less, that more a High Volume (13,500m�³ /min) of air at a Low Speed and cools up to 1000 square meters, produce a large scale of natural wind, which leads to the double functions of ventilation and temperature cooling, as well as dehumidification. It is the ideal solution to ventilation and cool the air in large spaces.

Quick Details
Type: AC ceiling fan
Brand Name: RTFANS
Power: 1.5KW
Voltage: 220~240V/380~415V
Motor Brand: Nord
Blade Material: Aerometal
Place of Origin: Guangdong, China (Mainland)
Certification: CE, ROHS, CCC, CB, ISO9001
Warranty: 3 years
Applicable Industries:
Advertising Company, Building Material Shops, Construction works , Energy & Mining, Farms, Food & Beverage Factory, Food & Beverage Shops, Food Shop, Garment Shops, Home Use, Hotels, Machinery Repair Shops, Manufacturing Plant, Printing Shops, Restaurant, Retail, Others


Product Features:
Driving Device
1. Imported Germany "NORD" coaxial bevel wheel decelerator with diameter of axle 40mm.
2. German Simrit double oil seal design, durable and reliable.
3. Shell top class Omala S4 lubrication oil, zero maintenance for over 20000 hours
4. High efficiency IE2 motor with imported SKF-VL bearing.
Controlling System
1. Denmark Imported "DANFOSS" VFD inverter
2. IP55 protection level and NEMA1 standard controlling box.
3. "Schneider" brand electrical sets, with safety protection module inside.
4. Operation temperature range -10 ~ 55 .
Fan Blade
1. High strength aircraft Aluminum alloy: AA6063T6511 with fluorocarbon coating surface processing.
2. Patented airfoil design, and special reinforcing rib support system, increase the strength and flexibility.
3. Standard Color: Grey, can be customized with MOQ.
Chassis
1. Innovative double bearing design, more durable and steadier.
2. Imported AA7075 Aluminum alloy with 1000T heat forging & 570Mpa extension strength
3. T6 heat treatment & CNC precise machining.

Product Advantages
Large area coverage more than 1000 m2
Tridimensional wind from all directions
Natural, comfortable, gentle breeze
Space saving and elegant looking
Maintenance free, long life span

PTC Temperature Sensor
Custom PTC Overheat Protection Sensor Manufacturer | Wholesale OEM Supplier
As a custom temperature sensor manufacturer with over 5 years of focused experience in temperature sensing technology, Evergreen operates a 13,000 m�² production facility certified to ISO 9001:2015 and ISO 14001:2015, and supplies wholesale OEM volumes of PTC overheat protection sensors to Fortune 500 partners across the United States, Europe, and beyond.
We design and produce PTC sensors for overheat protection, temperature switching, and self-regulating heating, with engineering support for custom switching temperature and form factor â?? backed by a quality system that spans raw material inspection through final performance testing.
OEM & Custom PTC Sensor Manufacturing
As a professional custom PTC sensor factory, we provide OEM and application-specific solutions, including:

Custom switching/trip temperature to match your protection threshold


Resistance characteristics and response tuning


Custom package type and form factor (disc, radial leaded, probe, PCB-mount)


Custom cable length and connector configurations


Custom waterproof probe sealing for harsh environments

From sample development to stable wholesale-volume mass production, we support long-term OEM cooperation with consistent quality control.

MOQ, Sample Lead Time & Wholesale Pricing
We support both small-batch sampling for product development and wholesale-volume orders for production-stage sourcing.

Minimum Order Quantity (MOQ):

MOQ varies by customization level â?? standard catalog items generally have lower MOQs than fully custom switching-temperature designs. Contact us with your target volume for a tailored quote.


Sample Lead Time:

Sample lead time depends on customization scope. Confirm exact timing with our team for your specific requirement.


Wholesale Pricing: Volume-based pricing available â?? contact our team with your target switching temperature and volume for a tailored quote.

The LPM Series Vertical Nano Ceramic Sand Mill is a vertical bead mill designed and optimized for reliable application of 0.03-0.3 mm grinding beads. Its innovative design and specialized functional components support high production capacity and a screen-free separation system that helps prevent clogging.

Features of the LPM Series Vertical Nano Sand Mill

1. Motor: Permanent magnet synchronous motor or three-phase asynchronous motor

2. Transmission mode: The motor drives the pulley for transmission

3. Discharging method: Dynamic centrifugal discharging without a screen

4. Grinding and dispersion structure: Rod pin type

5. Cooling method: The grinding barrel uses double-layer cooling-water circulation, while the machine-seal coolant circulates for cooling

6. Grinding media: Zirconia balls, 0.1-2.0

7. Grinding speed: 0-650 r/min with frequency-conversion speed regulation

8. Control system: Independent human-machine interface control with material-temperature, pressure, and cooling-water-temperature control; mechanical-seal liquid-level, pressure, temperature, and liquid-level control; and real-time motor-temperature monitoring

9. Sound and light prompts: When a sensor detects an abnormality, the grinding machine stops running and provides a sound and light alarm with detailed alarm information on the human-machine interface

10. Grinding chamber: Inner cylinder silicon carbide

11. Features: Mesh-free separation, narrow particle-size distribution, high efficiency, and ultra-low energy consumption

The vertical sand mill is offered at a reasonable price. Contact us for further information.

For more information about the vertical sand mill working principle, please visit our website.

As a sand mill company specializing in nano grinding machines, we provide equipment for ultrafine grinding and efficient material dispersion. Sand mills are widely used for pulverizing solid particles to the micron or nanometer scale and for achieving fine, uniform material dispersion. They are used in applications including new-energy battery materials, coatings and inks, electronic ceramics, cosmetics, fine chemicals, and mineral processing.

Intelligent Precision Glue Control System
The Golden Horse GM-4020 is an intelligent glue concentration control system designed for high-precision carton production. It features real-time concentration monitoring (±100 accuracy), automatic temperature regulation (40â??100°C), and multiple safety alerts to support consistent glue viscosity.
Compatible with jelly glue and viscous adhesives, its stainless-steel 316 construction and reflux filtration are designed to extend equipment lifespan and reduce waste. It is suitable for automated production lines.
GM-4020 Intelligent Precision Glue Control System supports glue application in carton manufacturing. It integrates sensors and thermal management to reduce the need for manual viscosity checks.
Key Advantages of GM-4020 Intelligent Gluing Inspection Systems
Precision Control: Real-time concentration tracking with ±100 tolerance.
Energy Saving: Dual-temperature zones (glue/water).
Auto-alerts: Alerts for sensor faults and low glue melt; suitable for jelly glue and white glue.

Description:

It is used in frequency regulation, reduce energy consumption. Start the equipment smoothly, Reduce the damage of current to motor when starting.

Applicatons:

Widely used in intelligent controlling for Constant-pressure Water Supplying System, compressor, Fan and water pump, Central Air-Conditioning System, Port Machinery, machinary tool, boiler, paper machine, food machinery.

Advantage:

1. Energy saving.
2. Saving cost.
3. Improve the accuracy of pressure control.
4. Prolong the service life of motor.
5. The noise of the motor is reduced.

we supply a series of AVR such as SX440,SX460,MX321,R230,R448

in carton package,net weight 539g

NetSure ETC280/48-1000 natural cooling remote module is designed to meet the need for a small outdoor power supply with high protection, and the need for a remote DC power supply. This module which adopts natural air cooling is of high protection and low noise, especially for severe environments. The compatibility with AC and DC input modes satisfy different power supply needs, and the support in DC output parallel meets the larger power supply need. UGAMAT Company.

Safer, While a traditional fan has fast-spinning blades carrying risk of cutting children¡¯s finger, an air multiplier is much safer since no rotating blades visible.
Greener, Our products are made of imported ABS material and have passed Rohs environmental certification.
More Energy-efficient , The electricity consumption of an air multiplier is half of a traditional one
More user-friendly, Compared with traditional fans, air multipliers are easier to clean since there are no blades. And, with dimmer switch control, precise airflow control can be achieved.


Size: 290*230*530mm
Weight: 3kg.

Motor lamination stamping dieMotor is the most important on the machine running .As the Janpa Kuroda technology ,we offer the AC motor lamination stamping dieDC motor lamination stamping diebrushless motor lamination stamping diebrushed motor lamination stamping dieinduction motor lamination stamping dieshaded pole motor lamination stamping diecapacity motor lamination stamping dieservo motor lamination stamping diestepper motor lamination stamping diemini motor lamination stamping die  ect.Qualtity :Tolerance of spare parts is within 0.002mm,tolerance of feeding length is within 0.003-0.005mm,and groundness is within R0.05-0.5,concentricity is within 0.05mm.Speed :stamping speed reach 300-600 strokes per minute.Mould life :regarding life reaches 1 million to 5 million strokes ,while total life from 100 million to 200 million .Product size :we can make stamping die for motor lamination from OD 3mm to 1000mm.Technology :(1)Japan Kuroda designing(2)auto stack auto skew(3)shoulder hole for stator rotor lamination(4)rotation for lamination within 180 degree.Service:(1)Our engineer can go to your factory for installing and teaching you.(2)we will offer  50% mould spare parts .QUALITY CHECKING:We have switzerland CMM, projector, microscope,   micrometer ,calipers ,hardness test ,dial indicator , micrometer gauge  ect ,ensure our quantity is good.

Motor lamination stamping dieMotor is the most important on the machine running .As the Janpa Kuroda technology ,we offer the AC motor lamination stamping dieDC motor lamination stamping diebrushless motor lamination stamping diebrushed motor lamination stamping dieinduction motor lamination stamping dieshaded pole motor lamination stamping diecapacity motor lamination stamping dieservo motor lamination stamping diestepper motor lamination stamping diemini motor lamination stamping die  ect.Qualtity :Tolerance of spare parts is within 0.002mm,tolerance of feeding length is within 0.003-0.005mm,and groundness is within R0.05-0.5,concentricity is within 0.05mm.Speed :stamping speed reach 300-600 strokes per minute.Mould life :regarding life reaches 1 million to 5 million strokes ,while total life from 100 million to 200 million .Product size :we can make stamping die for motor lamination from OD 3mm to 1000mm.Technology :(1)Japan Kuroda designing(2)auto stack auto skew(3)shoulder hole for stator rotor lamination(4)rotation for lamination within 180 degree.Service:(1)Our engineer can go to your factory for installing and teaching you.(2)we will offer  50% mould spare parts .QUALITY CHECKING:We have switzerland CMM, projector, microscope,   micrometer ,calipers ,hardness test ,dial indicator , micrometer gauge  ect ,ensure our quantity is good.