Find Verified Cow Dung Logs Suppliers, Manufacturers and Wholesalers

Product Overview
Timber logs drying machine, ply wood dry equipment, wood veneer dryer loading capacity is from 30m³ to 500m³, which is suitable for large, medium and small wood processing enterprises. It can dry all kinds of wood by adjusting the drying process. It has wide applicability, good quality and stable performance.

PRODUCT CONFIGURATION
CHANGCHAI high-power engine
Imported EATON control valve
Japan Shimadzu hydraulic motor

Timber logs drying machine, ply wood dry equipment, wood veneer dryer: operation technicians can input wood drying process or directly select the inherent wood drying processin the control instrument for wood drying. The automatic control system carries out automatic detection of temperature, balance moisture content and wood moisture content in the kiln according to the input or call of the drying process procedure, and guidesthe kiln to heat and dehumidification in accordance with the detected data to achieve the wood drying effect.

Advantage of heat pump dryer
1: The heat pump drying machine is Commercial drying equipment.
2: Simple installation, provide operating manual and installation video .
3: Easy operation, can via PLC control panel to setup the temperature and humidity in advance.
4: Low cost, lower energy consumption, high efficiently.
5: Clean and sanitary, heat pump system keep clean hot air into drying room, during the dehydrate processing, no need to move material .
6: Low temperature dehydration processing can better keep material nutrition.

SALES AND SERVICE NETWORK
KUNTENG company was founded in 1999, KUNTENG company professional manufacture: timber logs drying machine, ply wood dry equipment, wood veneer dryer. KUNTENG got more patented technologies and honor, the product has passed the international quality management system ISO9001:2000 certification, production license, CCC, CE certification and many other certification authority of the state quality and technical supervision departments identified and quality inspection. Products sold around the world, has won very good feedback from the European and American customers, high customer satisfaction.

We have the most professional technical team to serve you
1. Three guarantee services
2. The equipment is well debugged before leaving the factory
3. On-site installation and debugging of large-scale equipment technicians
4. The technician will teach you the operating instructions of the equipment 5. All the above are free

FAQ
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Heat Pump Dryer,Drying Room, briquette machine
5. what services can we provide?
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Accepted Delivery Terms: FOB,CFR,CIF,EXW
Accepted Payment Currency:USD,EUR,CAD,AUD,GBP,CNY;

PRODUCT OVERVIEW
By countless practices and improvements, Our horse manure firewood bar extruder machine, has stable performance with excellent quality.This is a mature sawdust extruder equipment.

Improved feedport
Bigger and deeper to prevent leakage material.
Automatic cutter
Automatic cutter can saves a lot of labor costs.
Different shape moulds
We have a lot of moulds to choose.
Heating coil & Propeller
Ensure biomass briquette extruding evenly.

This horse manure briquette making machine,firewood bar extruder machine,sawdust block press machine, have wide application range,such as Sawdust,Rice Husk,Straw,Peanut Shells,Agricultural Wastes,Bagasse,Wood Chips,Biomass waste,Bamboo dust,Grass,Branches,Coffee Grounds,Cotton Stalks,Coconut Shell,Corn Stalks,Paddy,Hay,Manure and so on.
This horse manure briquette making machine can extruding many shapes biomass briquettes.such as cylinder rod shape briquettes,hexagon rod shape briquettes,square rod shape,star rod shape briquettes, also can be customized.

CHARCOAL BRIQUETTE PRODUCTION LINE
Wood, coconut shell, palm shell,corn sticks,bamboo etc, are pulverized by our Dust-free grinder, --- If pulverized biomass waste moisture contentï¼?15%, need to drying them by our dryer machine---extruding sawdust to biomass briquette by this biomass briquette making machine---through the carbonization furnace carbonization,biomass briquette finally become charcoal briquette.

COMPANY PROFILE
Kunteng Machinery founded in 1999, located in Zhengzhou Henan province, China.Mainly focuses on design and manufacturing charcoal making machines,charcoal briquette machines,horse manure briquette making machine,firewood bar extruder machine,sawdust block press machine,hot air dryers, waste sorting machines, coconut shell processing machines. Kunteng Machinery is a high-tech modern enterprise integrating scientific research and development, production and sales, engineering design,installation services. Our machine has passed ISO9001:2000 CCC,CE certification.Our machines has already spread over the world.We can provide customers with one-stop service and solutions, complete equipment, on-site installation, and after-sales support.

Our services:
We provide customers with one-stop services from design, production, shipping,installation,and training how to operate,please feel free to tell us your requirement.
Pre-sale
1. According to your needs, select right model for you.
2. According to your special requirements, design customized solution and manufacture customized products for you.
Sale
1. Sign contract, pay deposit, we arrange production.
2. Product acceptance.
3. Help you formulate construction scheme.
After-sale
1. Assign engineer service for you on-site freely.
2. Install and adjust device, train how to operate.
3. After installation, leaving 1-2 technical staff to help you on-site production, until achieve customer satisfaction.

High Quality Africa Doussie / Tali / Azobe / Rosewood Logs

Quick description

The product of Rosewood logs

Green weight (kg/m3) = 1100 - 1200
Specific gravity at 12% M.C. (kg/m3) MV12 = (heavy) 750
Volumetric swelling for 1% MC variation V% = (small) 0.44
Total tangential swelling T% = 4.6
Total radial swelling R% = 3.1
Crushing strength (N/mm2) C12 = 74*
Static bending strength (N/mm2) F12 = 173*
Modulus of elasticity (N/mm2) E12 = 13700*
Diameter : average 80-90 cm
Length: larger than 5.5 meter
cuanzensis : MV12 = 850 ; C12 = 63 ; F12 = 153 ; E12 = 11300

Logging cable ia applicable to the logging, perforation,coring of various oil wells, marine investigation,surveying of river, harbor and irrigation works and coalfield geo;ogical explration etc.

Firelogs burn much cleaner than real firewood. They typically produce 70 percent less particulate matter, 85 percent less carbon monoxide and 50 percent less smoke. ... These firelogs produce a significant amount of heat per pound and they are a good use for waste sawdust from wood mills and other woodworking companies.

Log grab:

1.Made of Q345B(equal to SGC-490 ).

2.Can be either mechanical-driven or hydraulic-driven.

3.Can be either rotary or non-rotary.

4.Cylinder's piston are well-protected by against collision damage.

5.Oil hose are well protected by plastic covering.

Log grapple.

We are global suppliers of quality Teakwood Logs, squares and lumbers.

Teak wood is one of the highest quality available hardwoods today. Its natural properties make it resistant to weather variations. Exposure to sun and rain do not damage teak as they would damage other types of wood.

Our teak wood, especially, comes from legal origin and high quality forest management.



Logs
They come from thinning and final cuts, sold with different specifications for the sawmills of the region and exported to the whole world.



Logs can be used in the creation of rustic outdoor and indoor furniture, pillars, veneer and even masts of ships. After to be processed in a sawmill into planks and lumber can be applied for all kind of teak uses. After all, thanks to its high resistance to moisture, teak is widely used in shipbuilding.


Lumber
Sawn lumber is produced on its own sawmill, which allows us to offer saws cuts of different specifications, according to the customerâ??s needs. It is ideal for the manufacture of furniture, floorings, decks, wooden artifacts and decorative items in general.



Squares
The squares are produced in the sawmills with an internationally recognized liability standard.



It is possible to find squares of teak being used in construction for doors, windows frames, in the composition of decks, floorings and fancy furniture. The high durability of teak wood provides an excellent cost-benefit to the final consumer.



We equally have the following species of wood available...
IROKO,SAPELLI,OKAN,AZOBE ,IROKO , TALI,FARO,MOVINGUI,BOSSE,AIELE,ZINGANA,EBENE,AYOUS,TEAK,WENGUE,KOSSIPO





,

,

We are global suppliers of quality Teakwood Logs, squares and lumbers.

Teak wood is one of the highest quality available hardwoods today. Its natural properties make it resistant to weather variations. Exposure to sun and rain do not damage teak as they would damage other types of wood.

Our teak wood, especially, comes from legal origin and high quality forest management.



Logs
They come from thinning and final cuts, sold with different specifications for the sawmills of the region and exported to the whole world.



Logs can be used in the creation of rustic outdoor and indoor furniture, pillars, veneer and even masts of ships. After to be processed in a sawmill into planks and lumber can be applied for all kind of teak uses. After all, thanks to its high resistance to moisture, teak is widely used in shipbuilding.


Lumber
Sawn lumber is produced on its own sawmill, which allows us to offer saws cuts of different specifications, according to the customerâ??s needs. It is ideal for the manufacture of furniture, floorings, decks, wooden artifacts and decorative items in general.



Squares
The squares are produced in the sawmills with an internationally recognized liability standard.



It is possible to find squares of teak being used in construction for doors, windows frames, in the composition of decks, floorings and fancy furniture. The high durability of teak wood provides an excellent cost-benefit to the final consumer.



We equally have the following species of wood available...
IROKO,SAPELLI,OKAN,AZOBE ,IROKO , TALI,FARO,MOVINGUI,BOSSE,AIELE,ZINGANA,EBENE,AYOUS,TEAK,WENGUE,KOSSIPO





,

,

High Quality Africa Doussie / Tali / Azobe / Rosewood Logs

Quick description

The product of Rosewood logs

Green weight (kg/m3) = 1100 - 1200
Specific gravity at 12% M.C. (kg/m3) MV12 = (heavy) 750
Volumetric swelling for 1% MC variation V% = (small) 0.44
Total tangential swelling T% = 4.6
Total radial swelling R% = 3.1
Crushing strength (N/mm2) C12 = 74*
Static bending strength (N/mm2) F12 = 173*
Modulus of elasticity (N/mm2) E12 = 13700*
Diameter : average 80-90 cm
Length: larger than 5.5 meter
cuanzensis : MV12 = 850 ; C12 = 63 ; F12 = 153 ; E12 = 11300

Product name : Farm cow magnet, Custom Super Strong permanent N48 Neodymium Magnets for Stainless steel Cow Magnet
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available)
Direction of magnetisation : Through the thickness or through the diameter
Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on.
Grade : N35,N38,N40,N42,N45,N48,N50,N52
Tolerance in size : +/-0.1 mm

Product name : Cow magnet, Custom Super Strong permanent Y30BH Ferrite Magnets for farm cow magnet
Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Ferrite Magnets are also available)
Direction of magnetisation : Through the thickness or through the diameter
Grade : Y30,Y30BH,C8
Tolerance in size : +/-0.1 mm

We are global suppliers of quality Teakwood Logs, squares and lumbers.

Teak wood is one of the highest quality available hardwoods today. Its natural properties make it resistant to weather variations. Exposure to sun and rain do not damage teak as they would damage other types of wood.

Our teak wood, especially, comes from legal origin and high quality forest management.



Logs
They come from thinning and final cuts, sold with different specifications for the sawmills of the region and exported to the whole world.



Logs can be used in the creation of rustic outdoor and indoor furniture, pillars, veneer and even masts of ships. After to be processed in a sawmill into planks and lumber can be applied for all kind of teak uses. After all, thanks to its high resistance to moisture, teak is widely used in shipbuilding.


Lumber
Sawn lumber is produced on its own sawmill, which allows us to offer saws cuts of different specifications, according to the customerâ??s needs. It is ideal for the manufacture of furniture, floorings, decks, wooden artifacts and decorative items in general.



Squares
The squares are produced in the sawmills with an internationally recognized liability standard.



It is possible to find squares of teak being used in construction for doors, windows frames, in the composition of decks, floorings and fancy furniture. The high durability of teak wood provides an excellent cost-benefit to the final consumer.



We equally have the following species of wood available...
IROKO,SAPELLI,OKAN,AZOBE ,IROKO , TALI,FARO,MOVINGUI,BOSSE,AIELE,ZINGANA,EBENE,AYOUS,TEAK,WENGUE,KOSSIPO





,

,

"A special equipment for the production of wood chips for Leafs/Wood log Crusher. It is widely used in the industrial production of medium density fiberboard, ordinary particleboard, and paper-making. As one of the main machines of the wood chip preparation section, it can also be used as a stand-alone machine for the production of wood chips.
The cutting materials of the Leafs/Wood log Crusher are mainly small-diameter wood, wood harvesting residues (twigs, branches, etc.), wood processing residues (slats, board skins, garden cores, waste veneer, etc.), etc.
The machine has a compact and reasonable structure, easy operation, high production capacity, safety and reliability, and easy maintenance. It is currently a relatively advanced stump machine."

We are global suppliers of quality Teakwood Logs, squares and lumbers.

Teak wood is one of the highest quality available hardwoods today. Its natural properties make it resistant to weather variations. Exposure to sun and rain do not damage teak as they would damage other types of wood.

Our teak wood, especially, comes from legal origin and high quality forest management.



Logs
They come from thinning and final cuts, sold with different specifications for the sawmills of the region and exported to the whole world.



Logs can be used in the creation of rustic outdoor and indoor furniture, pillars, veneer and even masts of ships. After to be processed in a sawmill into planks and lumber can be applied for all kind of teak uses. After all, thanks to its high resistance to moisture, teak is widely used in shipbuilding.


Lumber
Sawn lumber is produced on its own sawmill, which allows us to offer saws cuts of different specifications, according to the customerâ??s needs. It is ideal for the manufacture of furniture, floorings, decks, wooden artifacts and decorative items in general.



Squares
The squares are produced in the sawmills with an internationally recognized liability standard.



It is possible to find squares of teak being used in construction for doors, windows frames, in the composition of decks, floorings and fancy furniture. The high durability of teak wood provides an excellent cost-benefit to the final consumer.



We equally have the following species of wood available...
IROKO,SAPELLI,OKAN,AZOBE ,IROKO , TALI,FARO,MOVINGUI,BOSSE,AIELE,ZINGANA,EBENE,AYOUS,TEAK,WENGUE,KOSSIPO





,

,

CARBONIZER MACHINE
Carbonizer machine, charcoal making furnace and burning coal in log burner are made by horizontal manufacturing process, in which there is a three-layer structure with polyurethane insulation material in the middle to keep the temperature inside the furnace. The door of the furnace is sealed with filler, which does not enter the air, and the carbon output is much higher than that of the conventional charring furnace. It is called green carbonization furnace because the carbonizing process produces a lot of yellowish combustible gases from the sticks. These gases pass through the charring furnace with its own pipeline, which allows the combustible gases to be transferred to the charring furnace combustion area for secondary fire heating. It is more environmentally friendly and saves fuel. Excess gas from the charring furnace can be used to dry sawdust or to fire the boiler. The cooling time of the charring furnace is shorter, we use the gap between the intermediate layers to naturally cool the charring furnace with unit water cooling, which is more efficient and convenient.
Carbonizer machine, charcoal making furnace and burning coal in log burner can use different material as heating source.Such as the waste wood, coal, gas, natural gas, liquefied gas, combustible gas(produced during the carbonized process)

We could customize reasonable and efficient production line according to customers' site, raw materials, output and other requirements.
Firstly, palm shell, coconut shell, wood, bamboo and other biomass are carbonized into charcoal by carbonization furnace and enter hoister and storage tank. According to customer's raw material, you can choose continuous carbonization furnace, horizontal charcoal making stove and hoisting carbonization furnace.
Secondly, charcoal can be crushed into charcoal powder by dust-free grinder.
Thirdly, charcoal powder are stirred by double shaft mixer and mixer.
In the end, charcoal powder can be formed into ball, cylinder, tables and cubic by briquette machine and enter the dryer by drying.

PACKING & SHIPPING
The plastic film bag wrapped machine, according to the size and weight to make wood case, put machine in and fixed the box after loading. The carbonization machine parts need to be put in a fixed container, should be fixed well, lest collision and wear, or lost.

KUNTENG Group Service Items
Pre-sale
1. According to your needs, select right model for you.
2. According to your special requirements, design customized solution and manufacture customized products for you.
Sale
1. Sign contract, pay deposit, we arrange production.
2. Product acceptance.
3. Help you formulate construction scheme.
After-sale
1. Assign engineer service for you on-site freely.
2. Install and adjust device, train how to operate.
3. After installation, leaving 1-2 technical staff to help you on-site production, until achieve customer satisfaction.

High Quality Africa Doussie / Tali / Azobe / Rosewood Logs

Quick description

The product of Rosewood logs

Green weight (kg/m3) = 1100 - 1200
Specific gravity at 12% M.C. (kg/m3) MV12 = (heavy) 750
Volumetric swelling for 1% MC variation V% = (small) 0.44
Total tangential swelling T% = 4.6
Total radial swelling R% = 3.1
Crushing strength (N/mm2) C12 = 74*
Static bending strength (N/mm2) F12 = 173*
Modulus of elasticity (N/mm2) E12 = 13700*
Diameter : average 80-90 cm
Length: larger than 5.5 meter
A. cuanzensis : MV12 = 850 ; C12 = 63 ; F12 = 153 ; E12 = 11300

High Quality Africa Doussie / Tali / Azobe / Rosewood Logs

Quick description

The product of Rosewood logs

Green weight (kg/m3) = 1100 - 1200
Specific gravity at 12% M.C. (kg/m3) MV12 = (heavy) 750
Volumetric swelling for 1% MC variation V% = (small) 0.44
Total tangential swelling T% = 4.6
Total radial swelling R% = 3.1
Crushing strength (N/mm2) C12 = 74*
Static bending strength (N/mm2) F12 = 173*
Modulus of elasticity (N/mm2) E12 = 13700*
Diameter : average 80-90 cm
Length: larger than 5.5 meter
A. cuanzensis : MV12 = 850 ; C12 = 63 ; F12 = 153 ; E12 = 11300

We are global suppliers of quality Teakwood Logs, squares and lumbers.

Teak wood is one of the highest quality available hardwoods today. Its natural properties make it resistant to weather variations. Exposure to sun and rain do not damage teak as they would damage other types of wood.

Our teak wood, especially, comes from legal origin and high quality forest management.



Logs
They come from thinning and final cuts, sold with different specifications for the sawmills of the region and exported to the whole world.



Logs can be used in the creation of rustic outdoor and indoor furniture, pillars, veneer and even masts of ships. After to be processed in a sawmill into planks and lumber can be applied for all kind of teak uses. After all, thanks to its high resistance to moisture, teak is widely used in shipbuilding.


Lumber
Sawn lumber is produced on its own sawmill, which allows us to offer saws cuts of different specifications, according to the customerâ??s needs. It is ideal for the manufacture of furniture, floorings, decks, wooden artifacts and decorative items in general.



Squares
The squares are produced in the sawmills with an internationally recognized liability standard.



It is possible to find squares of teak being used in construction for doors, windows frames, in the composition of decks, floorings and fancy furniture. The high durability of teak wood provides an excellent cost-benefit to the final consumer.



We equally have the following species of wood available...
IROKO,SAPELLI,OKAN,AZOBE ,IROKO , TALI,FARO,MOVINGUI,BOSSE,AIELE,ZINGANA,EBENE,AYOUS,TEAK,WENGUE,KOSSIPO





,

Principle

Progesterone (P4) is a kind of steroid hormone. The concentration change of P4 in milk is one specific characteristic indicating the activities of cow ovary. It plays an important role in the process of maternal reproduction and maintaining pregnancy.

Therefore, it can be monitoring cow reproductive activity by detecting the concentration of P4. P4 concentration has different characteristic changes as the cows stage of reproductive physiology, through to detect the progesterone levels can make an accurate diagnosis of cow in early pregnancy.

Product Features

The strip can be used for diagnosis of cow early pregnancy, which is of high accuracy, easy operation, rapid and normal temperature storage, easy to carry, harmless to maternal and fetal safety.

The Scope Of Use

The test is mainly suitable for dairy and beef cattle early pregnancy diagnosis, as well as to guide timely artificial insemination.

The Best Use Date

Cows estrus cycle is 21 days. There are individual differences in 18 to 24 days commonly, it is suggested to perform the test the 18th days after mating. Perform the test once every day for 5 continuous days; even if one negative result appears during the five days, which indicates the cow is not pregnant and P4 is at the lowest level at this moment. In this case, it was suggested to have the dairy cow mated in time; that should improve the conception rate. If positive results show for all 5 days tests, it indicates the cow is in pregnancy, and it should get careful nursing and gestation management. Another test method is to closely observe the cow rutting performance from 18 days after mating, if it was in rutting performance the detection should do immediately; for those that have no heat after mating to do a test on the 24th day.

Specimen Collection

1.Milk sample: cleaning teats before take the milk, abandon to the first three milk, then collect milk in the bottle, take 1 ml in the test tube, placed the centrifuge10000 rpm for 10 minutes, in vitro milk sample was divided into three layers, using straws inserted in the underlying absorbing liquid cream and set aside.

2.Saliva: from the mouth collecting saliva for 3 to 5 ml placed the centrifuge 1500-2000 rpm for 5 minutes, take supernatant on standby.

3.The galley proof: from the hair root galley proof according to take 10 mg in the extracting pipe, add 3 ml anhydrous ethanol soak vortex shock 5 minutes after 2-3 hours, placed 3000 rpm centrifuge for 5 minutes, drain on ethanol solution 1 ml into glass dish, in 70-80 â?? oven dry reoccupy after 1 ml PBS dilution. Set aside.

4.Urine: can be used directly.

5.Blood: anticoagulant take 1 to 2 ml of centrifugal 2000 rpm 5-10 minutes from the plasma standby, the anticoagulant let stand for 30 minutes to separate serum blood clots. Set aside.