C27200, c27000 etc.
4) chemical composition:cu >99.90% p:0.015%-0.040%
5) temper: o, 1/4h, 1/2h, h
O : hv<70; 1/4h :hv 65-85; 1/2h :hv 80-100; h :hv >100
6) electric 20℃conductivity:c1100 >97% ;c12200 >80%
Applications of copper tube (copper pipe):
1) natural gas, liquefied petroleum (lp)gas
2) hvac, snow melting, drain, waste, vent piping
3) re-drawing usage
4) high conductivity use
5) cable lugs and termainals
6) electric connectors
7)lighting industry
8) air conditioner and refrigerator
9) water tube service and distribution
10) fire protection, solar, fuel/fuel oil
Place of origin:china
Grade:a, cu99.95-99.99%
Dimensions: 1020*1010*16/1030*1010*7
Applications: electrolytic copper is related very closely to human and non-ferrous metal, is widely used in electrical, light industry, machinery manufacturing, building industry, national defense industry and other fields.
The product has passed iso9001 quality standard certification, its chemical composition consistent with quality standards gb/t467-2010
Packing: each ingot is 25kg, 40 ingot in bundles of 1mt, self palletized or as customer's requirements
Usage: 1.Cutting mouth/conductive mouth 2.Quicker connector
3.Electrode 4.All kinds of easy cutting copper parts
C10200
Hot rolled
Hot rolled
4~8
600~2000
4000 max.
High conductivity.
When thickness: 4~14mm,
Rm (min.):195mpa, a11.3(min.):30%
8~60
600~3000
6000 max.
60~150
600~2500
4000 max.
Don¡¡¡ê¡èt provide properties.
Cold rolled
Soft, h/4, h/2,
Hard,
Extra hard.
0.3~0.5
600 max.
2000 max.
Soft:rm(min.):205mpa a11.3(min.):30%.
H/4: rm: 215~275mpa a11.3(min.):25%.
H/2: rm:245~345mpa a11.3(min.):8%.
Hard: rm: 295~380mpa.
Extra hard: rm (min.):350mpa
0.5~3.0
1000 max.
2500 max.
3.0~12
3000 max.
6000 max.
Soft, h/8,
H/2, h
4~20
50~650
6000 max.
H
2~10
100~1000
300~2000
C10200
Oxygen free plates for
Copper stave in blast furnace.
Hot rolled
75~150
770~1590
1400~3600
High conductivity.
Product use
1) fastener, zipper, terminal, plug, electronics and decoration
2) used as wire, cable, brush and electric erosion copper
3) widely used in mould making, electrical appliances, distilling construction and chemical industry
Product details
Copper alloy
Material
Temper
Dimensions(mm)
The main properties
Thickness
Width
Length
C11000
C12200
C10500
C10200
Hot rolled
Hot rolled
4~8
600~2000
4000 max.
High conductivity.
When thickness: 4~14mm,
Rm (min.):195mpa, a11.3(min.):30%
8~60
600~3000
6000 max.
60~150
600~2500
4000 max.
Don¡¡¡ê¡èt provide properties.
Cold rolled
Soft, h/4, h/2,
Hard,
Extra hard.
0.3~0.5
600 max.
2000 max.
Soft:rm(min.):205mpa a11.3(min.):30%.
H/4: rm: 215~275mpa a11.3(min.):25%.
H/2: rm:245~345mpa a11.3(min.):8%.
Hard: rm: 295~380mpa.
Extra hard: rm (min.):350mpa
0.5~3.0
1000 max.
2500 max.
3.0~12
3000 max.
6000 max.
Soft, h/8,
H/2, h
4~20
50~650
6000 max.
H
2~10
100~1000
300~2000
C10200
O
Copper scrap 99.95%
1.Copper wire scrap
2.Copper wire, tube, plate, etc
building industry, national defense industry
Copper scrap is industry a important sources of the raw materials
All kinds of can be recycled
Recycling waste production with copper
Packing:
Squeeze into blocks
20 foot container can hold 25 mt
Copper pipe is almost pure copper manufactured to the requirements of astm b 42 - standard specification for seamless copper pipe, standard sizes. It may be manufactured from any of five (5) copper alloys (c10200, c10300, c10800, c12000, c12200) that all conform to the chemical composition requirements of alloys containing a minimum of 99.9% copper (cu) and a maximum of 0.04% phosphorous (p). Available sizes are 1/8" to 12" diameters in regular wall thickness and 1/8" to 10" in extra strong wall thickness. The standard length for copper pipe is 12 feet. Copper pipe is suitable for plumbing, boiler feed lines, refrigeration and for similar purposes.
Joints in seamless copper pipe can be threaded, flanged or brazed to fittings of the appropriate joint configuration.
Copper water tube is a seamless, almost pure copper material manufactured to the requirements of astm b 88 - standard specification for seamless copper water tube, of three basic wall thickness dimensions designated as types k, l, and m. Type k is the thickest and type m is the thinnest with type l being of intermediate thickness. All three types of tube are manufactured from copper alloy c12200 having a chemical composition of a minimum of 99.9% copper (cu) and silver (ag) combined and a maximum allowable range of phosphorous (p) of 0.015 % - 0.040 %.
Seamless copper tube manufactured to the astm b 75 - standard specification for seamless copper tube may be either round, square, or rectangular and is suitable for general engineering applications. It may be manufactured from any one of the following alloys: c10100, c10200, c10300, c10800, c12000, or c12200 unless specified otherwise on the original contract or purchase order.
Tubes meeting this standard may be furnished in any of several tempers (h55, h58, h80, o60, or o50) ranging from light drawn (usually limited to round tubes) to light annealed. It is the responsibility of the purchaser, when ordering, to provide the requirements for alloy (uns#), temper, dimensions (diameter, wall thickness, or distance between parallel surfaces), form (straight lengths or coils), and total length or number of pieces of any particular size. It is this requirement that forces this tube to be a special order tube and not a standard stocked material.
It is usually limited to use in specific manufacturing processes or production line type applications.
High speed wire rod rolling mill projects 1. Bv and iso certified manufactuere. 2. Engineer available for overseas service.
High speed wire rod rolling mill projects
1. Xian weikeduo electrical & mechanical equipments co., ltd is a high-tech company specialized in designing, manufacturing, marketing of high speed wire rod/bars/rebars hot rolling mills, our core technology is focused on the
3. Design feature
Arrangement of mills:
Continuous rolling line
Alternatively arranged h-v mills for rough/intermediate mills
Top 45¡ãcrossing high speed mills for pre-finishing train and finishing train
Rolling speed:
90-135 m/s
Weight of a coil:
1-2.5 t
Production capacity:
350, 000-800, 000tpa
4. Specifications:
Place of origin :
Xian, shaanxi province, china (mainland)
Brand name :
Hangji
Model number :
Hangji90/hangji135
Type :
Hot rolling mill
Rolling speed :
Max 135m/s
Place of origin :
China
Weight of coil :
1-2.5t
Type :
Rolling mill
Processing type :
Other
Packaging details :
Duly packed in ship-worthy packages / containers.
Delivery time :
Based on discussion between buyer and us
Supply ability :
20 set/sets per year based on client's requirement
5. Delivery and payment
Fob price:
Fob usd 3000~1000000 / set
Min order:
1 set/sets based on client's requirement
