Find Verified Computers Electronics Communications Electrical Suppliers, Manufacturers and Wholesalers

1200w strong smoke fog machine adapt to all types of corroboree, family parties.
It has our factory advanced "microwave shock fever" principle.
It is an economy smoke fog machine.

Technical reference:
Voltage: 220v-240v/50hz
110v-120v/60hz
Color: flash silver
Power: 1200w
N.W.: 6kg
G.W: 7kg
Size: 56 x 32 x 26.5cm


Carton size :56 x 32 x 26.5cm

60w gynecology surgical diode laser

The velas series from gigaa laser offer you a multiple choice for your different clinic requirements. Surgical applications require a technology that offers equally effective ablation and coagulation options.

Applications:
Feto-fetal transfusion syndrome (twin-to-twin-syndrome)
Closure of the pathologic vessels of the placenta with a 980nm laser in non-contact mode

Cervical erosion, leukoplakia vulvae, condyloma acuminatum, fallopian tube recanalization, ovarian wedge resection, oophorocystectomy, salpingoplasty, hysteromyomectomy, oophorectomy, hysterectomy, endometrectomy.

Main advantages
* based on the experienced r. D, administration team, gigaalaser focuses on the medical diode laser system and accessories for application in a wide range of medical specialties. * using the perfect chinese resource industry, we provide the high quality and the cost effective new type medical laser systems to the clients all over the world.
* new friendly used protocol
* big color touch screen
* output power calibration at the end of fibers
* highly integrated and modular design
* new design inside to make maintenance easy and low cost
* high quality and reliability

Technical parameters:
. Wavelength: 810/940/980/1470nm
. Laser output power: 15/30/60w
. Output modes: cw, single or repeat pulse
. Pulse duration: 10us-3s/10ms-3s
. Transmission system: fibers of 200um, 400um and 600um with sma 905 connector(200um only could be used on velas15b)
. Aiming beam: red diode laser of 635nm, power less than 5mw
. Control mode: true color touch screen
. Vlotage/current rating: 110v/220vac, 5a, 50/60hz or 110vac/5a, 220vac/10a, 50/60hz
. Dimensions: 400(w)x385(l)x200(h)mm

18x10w outdoor 4 in 1 led professional lighting
Multi-voltage: 100-240vac, 50/60hz
Outdoor led lighting power consumption: 180 watts
Light source: 18x10w 4 in 1 leds, each led have rgbw color
Beam angle: 15degree, 25degree, 30degree, 45degree (selectable)
Ip 65 outdoor rated, compact design, die cast case 4 in 1 led professional lighting
Silent operation, convection cooled (no fans)
Long life led(rated at 100, 000 hours)
Operational modes: dmx512, master-slave, stand-alone
Dmx-512 protocol
8 dmx channel modes
3 pin xlr data input & output
Intelligent led professional lighting
Electronic dimming: 0 - 100%
Linear rgb color mixing allows for infinite color possibilities
Flicker free - ready for tv / video use
Led display with easy to use function keys
Color strobe effect
Low power consumption
Very low heat output
Run all night
Mounting bracket designed for floor, wall or truss mount
Great for performance stages where traditional par cans emit a lot of heat onto performers
Smooth rgbw color mixing (fast or slow color change operation)
Dimensions (lxwxh): 300x300x330mm
Packaging (lxwxh): 1100x330x340mm (6pc/ctn)

Professional lighting
Led professional lighting
4 in 1 led professional lighting
4 in 1 professional lighting
Outdoor led professional lighting

1100x330x340mm (6pc/ctn)

Series:Hd10 series
Material:Plastic
Color:Gray
Shape:Circular
Cavities:3
Modification:Threaded rear
Insulation:.100-.150 insulation
Wire gauge:14, 16, 18, 20
Keyed:No
Contact size:16
Current rating:13
Holds pin/socket:Socket
Flange/in-line/pcb mount:In-line

Classification:
Mod No:CD11G,CD11GA,CD11GC,CD11GE,CD11GAL,CD11GCL,CD11GEL
Size:To your order
Terminal type:Radial
rated voltage:10-450V
capacitance :1~100uF
load life:3000-12000hrs
Operating tempetature range:-40C to +105C
Capacitance Tolerance: -10%~+20%(120Hz , 25C)
Certificate:RoHS,ICQ
Usage :LED driver ,energy-saving lamp/bulbs,electronics ,electrical household appliances ,industry use ,general use
Packing:250pc/bag or to your order
Transaction mode:FOB,CIF ,CNF ,etc
Payment:T/T,L/C ,paypal ,etc
sample charge :free
Production capacity:100000000pcs/month


Feature:
.cheap price
.low leakage£º
.High ripple current
.low dissipation
.Low impedance/ESR
.long load life:6000-15000HRS
.High and low temperature resistance
.high stability
.abundant capacitors types
.OEM welcomed
.ISO9001 management system
.RoHS compliant
.Great packing


Company introduce :
Yiyang PengCheng technology development Co., Ltd,an professional enterprise speciallized in aluminum electrolytic capacitors founded in 1988,Our company is engaged in radial electronytic capacitor research and development, production, marketing and service.
Our main products including:radial capacitors ,general use Aluminum Electrolytic capacitors,LED driver Aluminum Electrolytic capacitors,light capacitors ,high capacitance capacitors,Ballast capacitor which are wildely used in battry ,electrical household appliances,lighting,etc.RoHs compliant ,long life ,low leakage and high stability ,and wide range of working temperatrue .which make us to be one of the top rank of the Aluminum Electrolytic capacitors suppliers.Through persevering efforts, we have passed ISO9001: 2008, ISO14000: 2001, RoHS certificates. Due to the top quality products, reasonable prices and sincere service, we have also won the trust and support of our customers.
We have got experienced sales and after service system, and products are sold in India and we are planning for developing American, Asia marketing, ect. We also have offices in Beijing, ShenZhen, ZhongShan, HangZhou and some other domestic cities.
We want to cooperate with agents and dealers across the world, while the OEM, ODM, and foreign trading companies are welcome to negotiate about the matter concerning cooperation.welcome to contact us


250pcs/bag ,10000pcs/carton ,or to your order

Item specifics
Operating Temperature:-20-93Brand Name:ACOLFlow Rate:40Media Type:LiquidModel Number:WFS10004AAStorage temperature:-29-82:Ambient temperature:-20-71Medium temperature range:-20-93:Max. static pressure:10barSetting point:4KPa:Hystersis:1.2KPaMax. pressure difference:5bar:Set point repeatability:¡À1%Output:one SPDT dry contact:Switch: 10Amax,125/250VACPlace of Origin:Shanghai, China (Mainland)

Product Description

WFS10 Differential pressure flow switch



Overview:

The WFS10 differential pressure flow switch was designed for OEM customers to control flow accurately. It can be used in plumbing system when it is necessary to make sure the pressure difference between two points does not exceed or drop below a specific value. The setting value can not be changed, which can ensure the flow setting value can not be changed.



Features:

Easy to install

Good stability

Adjustable ranges

Accurately control flow

No resistance effect on water system

OEM capabilities include external adjustment knob with or without reference scale



Monitoring and application:

The pressure difference will increase with filtering, switch is on and output a signal when reached the pre-pressure value. If it automatically clean, the signal would be transmitted to controlling disk and then the controlling disk start to clean and open the waste valve. If worker to clean, the warning signal will be supplied.

Pump status and feed back to automatic controlling system:

The pressure difference is stable when the flow is constant, it would be changed when the system resistance is changed. The relation of pressure difference and flow, can refers to the pump performance data. So the differential pressure flow switch used for pump monitoring as well as the minimum flow control. When the actual pressure exceeds the set value, the switch output a dry contact signal for controlling system to indicate the pump has flow. The status light will indicates the pump status if it has.

Heat exchanger flow controlling

The differential pressure flow switch used for flow controlling is one of the most important application in HVAC system. It is the best substitutes of target type differential pressure flow switch. The reset flow is the minimum value used to check whether satisfy the requirement or not. The disconnect flow is protected instrument from decreasing flow. Following we take plate and extension-type heat exchanger and shell and tube type heat exchanger examples to introduce the characteristics of differential pressure flow switch.

Plate and extension-type heat exchanger

Plate heat exchanger with compact size and high heat transmission performance, has been widely used in cooling as evaporator and condenser. It is necessary to prevent plate heat exchanger from frost damage. A great deal of experimentation show that there is a possibility of freezing when the current flow less than the rated flow about 50%, so it is important to keep the current flow not less than 50% of rated flow. The pressure of 50% rated flow is the protection value of plate type heat exchanger, according to this value to choose differential pressure flow switch. We suggested to buy the fixed set point switch to ensure the value is right(the pressure difference can be tested by our professionals)

Shell and tube type heat exchanger

Shell and tube type heat exchanger used in cooling as evaporator and condenser. The

unstable flow directly influence the mainframe., so it is important to control the flow to ensure mainframe work normally. The 70% pressure of rated flow is the lower limit of protection value, we can obtain it according to the pressure and flow curve or measure in scene. You can consult the professionals of the ACOL for specific method. We suggest to buy double set points adjustable differential pressure flow switch, one of them can be used to indicate the heat exchanger cleaning status. Set the reasonable pressure difference and choose the status light, when the waste is overmuch the status light is on to remind the customer to clean heat exchanger. Avoid energy waste because of the heat transfer effect drops and influence main engine work.














Packaging Details
Unit Type:piecePackage Weight:0.65kg (1.433lb.)Package Size:13cm x 10cm x 11cm (5.12in x 3.94in x 4.33in)

MEGATRO provide every type of camouflage tower to satisfy customer needs for different climatic and natural environments. There are available two different types that distinguish themselves by foliage shape and bark type, tower type including Austrian pine, maritime pine, palm, cedar or other tree tower.
The trunk consists of a steel pole divided into several shafts, according to the overall height of the structure that can vary from 15 to 40 meters. The external surface of the trunk is lined by plastic material that is resistant to UVA rays and atmospheric agents, with an aspect that in time maintains the resemblance of natural bark.
The foliage is comprised of branches made of plastic material accurately designed, taking into consideration quantity, shape and array suitable to completely conceal the antennas and all accessory parts in a natural manner. The materials used, in addition to guaranteeing absolute radio-electric transparency and resistance to UVA rays, over the time keep their proper mechanical and color characteristics.
For more specification, both parties must discuss the style and technical requirements before production.
Availability size: Based on the customer's requirements.
Material: Chinese material or as per clients requirement
Package: both parties discuss before delivery
Terms of Payment: L/C, T/T
Minimum Order Quantity: one set
Port of Loading: Qingdao Port
Lead Time: one month or based on the customer's needs

Export standard package or as per client

MEGATRO provides the Wind Power Generating Industry the most reliable, economical MET tower systems in the business. These wind towers are made from solid steel and welded by certified welders, which is the tower units for wind power turbine, applied with wind power Generator during wind power generation. It is the large diameter & thick steel pipe structure below the generator of a wind turbine that supports the turbine, houses the meters and wires, and keeps the turbine high above the ground level to protect the surrounding area and people from the force of the blades. It is also the main stressed components which need to be enough strength and rigidity to endure huge wind pressure and shearing forces. The base also serves to elevate the turbine above surrounding obstacles that could otherwise block the wind. The tower units are formulated to a large tube with a variety of accessories which include platforms, ladders, cable fixings, positioning of switchboard and so on.

Some of MEGATRO wind tower belong to sefl-support type, as same as taper monopole; MEGATRO's all welded design provides maximum tower stiffness, minimum twist/sway and bending. Towers come with single pole and climbing ladder and rest platform and other tower accessories. After fabrication towers are delivered to take sand-blasting, then painting them one by one. First prime painting, then intermediate coat and as last finish painting.
All fabrication will be discussed by both parties and reach an agreement before mast production.
Place of Origin: Qingdao, Shandong, China
Model No: Based on the customer's requirements
Terms of Payment: L/C, T/T
Port of Loading: Qingdao Port
Delivery Lead Time: one month or based on the customer's needs
Design Requirements: based on the customers' specific requirements.
Minimum Order Quantity: 1 set
Performance Standard
Chinese standard or international standard
Material: Chinese material or as per clients material



Export standard package or as per client

MEGATRO is now offering different types of wind generators with competitive price, which including two types, vertical and horizontal type. It is used of wind energy in the wind farm, Energy Company and other fields.

MEGATRO wind-driven generator, is one kind of electro-mechanical device that can transformed wind energy into the mechanical energy, then again transforms them into the electrical energy. It uses the wind power, gathers them to the battery charging and saves the electrical energy. Besides, it also gather the electrical energy transformation and alternating current supply which voltage and hertz is 220V/50HZ ,110V/60HZ,230V/50HZ.

It has the advantages of no need the fuel and can't produce pollution and noises. And it has high efficiency and good low-speed, the speed regulating system adjusts automatically to wind speed, the whole system is easy to install and convenient to maintain.

It is generally suitable for the areas when the wind resources are rich. And it is widely used in the areas when the electricity is not sufficient or the electrical network is not normal. The main applied fields are as follows: air conditioning refrigerator, the washer, the illumination, the television, the searchlight, the communication equipments, the power tool and others.

Our wind generator' main parameters and sizes are as follows:
1 Machine Pattern: The horizontal (or vertical) axis approaches against the wind
2 Leaf Blade Pattern: Propeller
3 Leaf Blade Number: 3 pieces
4 Wind Wheel Diameter: 2.0 m, 2.5m, 2.6m, 2.8m, 3.2m, 4.0m, 5.0m, 7.0m, 8.0m, 12.0m.
5 Rated Speed: 160----400 revolutions/Minute,
6 Rated Power: 150W, 200W, 300W, 600W, 1000W, 1500W, 2000W, 3000W, 5000W, 10KW, 20KW, 30KW, 50KW
7 Working Voltages: 12V, 24V, 36V, 48V, 60V, 96V, 108V, 220V, 380V, 420V
8 Matches the accumulator cell: 480V,
9 Starting Wind Speed: 3.0 meters/ Second
10 Design Wind Speed: 8~ 9 meters/ Second
11 Operating Region: 3~20 rice/ Second
12 Hand of Rotation: Clockwise (face wind wheel)
13 The Wind cans the utilization factor: 0.4
14 High Speed Ratios: 6: 1 to 8: 1
15 Velocity Modulation Way: Leaning tail + electric brake
16 Sets Up an Altitude: 6-9meters
Place of Origin: Qingdao, Shandong, China.
Availability size: Based on the customer's requirements.
Fabrication: Based on the customer's requirements and other technical data agreed by both parties.
Package: packed with wooden case
Terms of Payment: L/C, T/T
Minimum Order Quantity: 1sets
Port of Loading: Qingdao Port
Delivery Time: one month or based on the customer's needs.

Export standard package or as per client

Specifications 5w COB LED Spotlight (PAR16)
Flux: 420lm(3000K); 440lm(6000K)
Socket: GU10, MR16,
Technical Data

Model No.
CGX-SL06G2
Overall Length 60mm
Diameter 49.5mm
Power 5W
Luminous Flux WW:420lm; CW:440lm
Input Voltage DC12V(MR16); 110V/ 220V (GU10, E26, E27)
Operating Frequency 50~60Hz
CCT 3000K; 6000K
Power Efficiency >85%
Power Factor >0.60
CRI >80
Material Cold calendered aluminium
Weight(N.W) 0.075kg
Operating Temperature -20deg ~ +75 deg
Beam Angle 80 deg 38 deg
Lamp Life Time 40,000Hrs
Base MR16, GU10, E26, E27, E17, E14, E11
Dimmable Yes

Applications:

LED spotlights are widely used for Home, office, museum, art galleries, cosmetic

counters, shopping malls, supermarkets, commercial show windows and bars
airport, subway, cloverleaf junction and architecture field.

Trade Terms:
1. Payment: T/T, Western Union, L/C, Paypal

2. Production lead time: 5~10 days for 100~5000pcs, 15~20 days for 5000~10000pcs
3. Sample can be delivered in 3 days
4. Shipping freight will be quoted under your requests
5. Shipping port: Shenzhen, China
6. Discounts are offered based on order quantities.



Our Service:
1. OEM/ODM services are welcomed.
2. Agent service are provided, with protection of your sales area, ideas of design and all your private information.

3. Good after-service: within guarantee period, refund, repair and rechange are promised if in case our products meet any problem, and we are willing to bear the unilateral shipping cost.

Pain management diode laser system
Gbox high power therapy laser

The gbox high-power therapeutic laser provides a non-surgical and painless treatment solution for even the most difficult neuromusculoskeletal, soft-tissue and orthopedic injuries challenging today¡¡¥s care providers. Class iv lasers bio-stimulate tissue growth and repair to maximize medical degrease in pain, inflammation and formation of scar tissue. This innovative class iv laser therapy exceeds all other treatment modalities by actually healing tissue while providing a powerful, non-addictive and side-effect-free form of pain management.

* arthritis
* neck & back injuries
* herniated discs
* spinal stenosis
* sciatica (leg pain)
* shoulder pain
* rotator cufftear
* tennis elbow
* carpal tunnel syndrome
* muscle & ligament tears
* hip & knee pain
* trigger points & muscle spasms
* sprains / strains
* pain following surgery
* nerve associated pain
* foot & heel pain
* plantar fascitis
* ankle sprain
* achilles tendonitis
* morton¡¡¥s neuroma
* bunion pain
* non-healing wounds

Donna(at)gigaalaser.Com

Gbox high power therapy laser

The gbox high-power therapeutic laser provides a non-surgical and painless treatment solution for even the most difficult neuromusculoskeletal, soft-tissue and orthopedic injuries challenging today¡¡£¤s care providers. Class iv lasers bio-stimulate tissue growth and repair to maximize medical degrease in pain, inflammation and formation of scar tissue. This innovative class iv laser therapy exceeds all other treatment modalities by actually healing tissue while providing a powerful, non-addictive and side-effect-free form of pain management.

* arthritis
* neck & back injuries
* herniated discs
* spinal stenosis
* sciatica (leg pain)
* shoulder pain
* rotator cufftear
* tennis elbow
* carpal tunnel syndrome
* muscle & ligament tears
* hip & knee pain
* trigger points & muscle spasms
* sprains / strains
* pain following surgery
* nerve associated pain
* foot & heel pain
* plantar fascitis
* ankle sprain
* achilles tendonitis
* morton¡¡£¤s neuroma
* bunion pain
* non-healing wounds

Donna(at)gigaalaser.Com

19D-201 meter is suit for for single-phase measurement, use scenarios such as residential, public facilities, and industrial use. 19D-201 can measure and display various important power parameters, optional communication ports support remote reading and monitoring. Bi-direction metering makes 19D-201 is an excellent choice for solar energy industry.



features:



-. Detect active/reactive energy, power, frequency, Max demand, voltage, Current and other important power parameters in one screen

-. Provide energy import and export measurement (IMP & EXP)

-. High light white backlit LCD screen

-. Energy pulse output

-. RS485 Modbus communication (optional)

-. Standard 35mm din rail mounting

-. Maximum 100A current access

-. Accuracy: Class 1.0s

Rectifier transformer is a transformer which used as the source of rectifier equipment. And primacy side of rectifier transformer connected with AC power is called line side, and secondary side connected with rectifier is called valve side.
Our company use the advanced techniques and manufacturing process, and with domestic colleges and universities to develop a number of research projects. Using procedural design, insulation breakdown mechanism, the electric field numerical analysis and insulation technology, the impact of characteristics and anti-sudden short-circuit strength of winding, the loss of eddy current filed calculation are analyzed and calculated. With manufacturing experience on rectifier transformer for many years, our company has got major break-though on the basis of the traditional calculation, which will further improve the reliability and advancement of products.
Features about rectifier transformer:
1.The rectifier transformer load is non-linear impedance, and valve side windings of rectifier transformer would get the currents which contain fundamental and other high-order harmonic superposition. And line side also gets corresponding non-sinusoidal currents connected by rectifier circuit coupling method.
2.According to different requirements of various customers, the valve side of rectifier transformer has a variety of special coupling method, such as: dual-back-star with inter phase reactor, three-phase bridge, star-delta parallel, six-phase bridge by inter phase reactor.
3.To improve power factor and reduce the line side harmonic currents of high-power rectifier equipments, rectifier transformer is needed to use star-delta winding phase displacement, phase-shift windings by phase displacement, autotransformer phase displacement, to improve the number of pulse of rectifier equipment.
4.According to the user¡¡¥s process requirements, the rectifier transformer line side voltage is required (such as 220kV) straight down to a very low valve side voltage (such as 1kV). The valve side voltage of rectifier transformer is required within a wide range of on-load tap from 5% - 105%. Auto voltage regulator and main theme of unity, string variable voltage regulator and other ways are used in rectifier transformer to achieve the purposes of a wide range voltage.
5.Self-saturable reactor can be used to change over and stabilize voltage in order to smooth rectify voltage. And some use silicon control to regulate voltage.
6.Valve side current of high-power rectifier equipment is very large, reaching 100kA and even greater. To improve power factor and avoid partial overheating and uneven distribution of current rectification components, it¡¡¥s required the technology of reverse-phase parallel.
7.With the wide application of AC frequency control technology, newly developed three-crack drive rectifier transformer came into being. And the lower voltage valve side of this transformer cracked into three independent branches, which can be made to supply for three different load power, which achieve ¡¡ã multi functional ¡¡À effect, reducing loss and saving area.
8.In order to reduce the large current in the fuel tank and other structures caused by loss, the rectifier transformer used magnetic shielding technology and so on.
A number of 220kV and below and different kinds of rectifier transformers have been manufactured for the general industrial, electrochemical electrolysis, transmission, traction frequency, variable frequency power supply, DC power transmission and other industrial sectors over ten years, and got the user¡¡¥s high praise. Recently, the 220kV level on-load-tap rectifier transformers supporting the country¡¡¥s largest 600 thousand project of caustic soda is done, and got the high praise of users.

fumigation wooden case

different types of silicon steel / electrical steel / CRGO / CRNGO Magnetic tape wound cores for transformer sensor etc.
Material Property:  CRGO&CRNGO
Material Brand:  Baosteel, NSC, JFE, TKS, POSCO, NLMK
Material Thickness:  0.05mm, 0.08mm, 0.1mm, 0.23mm, 0.27mm, 0.3mm, and 0.35mm.
Certificate:  RoHS 2011/65/EU
Technics:  tape winding
Products Frequency:  50-5K HZ
Products Shapes:  C E O & Customized
Mechanical Properties:  low power loss per cycle / low core loss / high permeability
Application:  transformer, sensor and magnetic components of electronic equipment; Automobile Sensor, Solar Inverter, Smart Home

CRGO Tape wound Cores
wind one long continuous silicon steel tape tightly into a spiral
advantage: no air gap, high magnetic properties, easy to roll
weakness: difficult to wind large cores and realize mechanized

Welding ï¼?Spot welding is firm and smooth, and does not weld through two layers
Winding ï¼?winding is tight, the start and end of the sheet can not be turned up
Planeness ï¼?surface unevenness is less than 0.1mm
Fineness ï¼?No crystalline fine particles (no crystalline fine particles on the cut surface)
Cut face ï¼?No obvious crack on the cutting face (no light transmission and peeling between layers)
Surface ï¼?Visually without burrs, rust, or deformation (to control deformation within tolerances)
Products ï¼?Do not contain Pb\Cd\Hg\Cr\PBBs\PBDEs

Main features:
rm software can be provided
8. Onvif procotol supported, convenient to compatible with the third party¡¡¥s platform
9. Support varieties network browsers (ie , chrome , firefox , safari)
10.Support web , software client , stream media client , support sdk develop
11. Support 21 varieties languages (arabic, brazilian, english, french, german, greek, hebrew, hungarian, italian, japanese, korean, poland, portugal, romanian, russian, simple chinese, spanish, suomi, thai, tradchinese, turkey)

Camera, bracket, screw, manual, color box for each unit, carton box for 100pcs

, safari)
8. Support web , software client , stream media client , support sdk develop
9. Support 21 varieties languages (arabic, brazilian, english, french, german, greek, hebrew, hungarian, italian, japanese, korean, poland, portugal, romanian, russian, simple chinese, spanish, suomi, thai, tradchinese, turkey)
10. Support nvr docking , support onvif standard
11. Wdr function.

Camera, bracket, screw, manual, color box for each unit, carton box for 100pcs

Industry-leading, carrier-class edge router ideal for service providers that deliver consumer and business services provides high-performance capabilities with up to 720 gbps in one chassis choice of form factors which are purpose-built for high availability

* sheath material: lszh or pvc
* nominal dia.: 7.3 ¡¨¤ 0.2mm
* average thickness: 0.65mm
* minimum point thickness: 0.55mm
2, mechanical properties
Conductor insulation material: halogen free foam/skin material
Cable jacket material: halogen-free, flame-retardant material
Applic
Loop impendence: 130 w/km
Highest impendence difference: 2%
Insulation resistance >5000 mw x km
Impendence z0 at 1 100mhz: 100 w ¡¨¤ 15%
Impendence z0 at 1 350mhz: 100 w ¡¨¤ 18%
Impendence z0 at 1 500mhz: 100 w ¡¨¤ 25%
Surface transfer impendence: < 100 mw per meter at 10mhz
Earthing symmetry db/bzl = 1000m > 46db at 64khz
Earthing symmetry db/bzl = 100m > 40db at 1mhz
Earthing symmetry db/bzl = 100m > 20db at 100mhz
Mutual capacitance: 43pf/m
Highest earthing-coupling: 0, 001mhz: 1000 pf/km
Propagation speed at > 10mhz (nvp*c): 0, 79c
Signal propagation delay >10mhz: 4, 2ns/m
Skew: <25ns/100m
4, transmission properties: ( at 20¡ãc)

Frequency [mhz] 1 10 16 20 31.25 62.5 100 300 500
Typical values (attenuation) [db/100m] 1.8 5.2 6.8 7.7 9.6 13.8 17.5 31.5 40
Typical values (next) [db/100m] >100 >100 >100 >100 >100 >100 98.0 93.0 80
Typical values (psnext) [db/100m] 98.0 98.0 98.0 98.0 98.0 98.0 96.0 91.0 80
Typical values (elfext) [db/100m] 93.0 93.0 93.0 93.0 90.0 86.0 84.0 65.0 60
Typical values (pselfext) [db/100m] 91.0 91.0 91.0 91.0 88.0 84.0 82.0 63.0 50.3
Typical values (rl) [db/100m] 26.2 34.7 36.3 35.7 36.3 36.1 36.1 31.7 27.5
Typical values (acr) [db/100m] 98.2 94.8 93.2 92.3 90.4 86.2 80.5 61.5 51.3

Package: wooden drum

Frequency response:
Harmonics radiation: <-55dbc
Battery voltage: aa


Appropriate situation
Ktv project installment, bar and stage performance, celebration and meeting host and other outside activities.


Packing: color box + epe