Special emulsion and low odor formulation, it is 100% lead free & low voc. Dispose of excess product and containers in a responsible manner without harming the environment.
Application public corridor, staircase, parking, school, hospital and new building or maintenance engineering in interior wall.
Color: white and others is available, also we can adjusting colour for your needs.
Theoretical coverage: 9m²/ time/kg the practical consumption may vary with substrate condition, construction methods, environment and other factors.
e, parking, school, hospital and new building or maintenance engineering in interior wall. Particularly suitable for renovate the loosen old wall coats.
Specification:
Sheen: matt
Colour: white
Theoretical coverage:
8m2/ time/kg(dry film thickness 30 micromete), note: the practical consumption may vary with substrate condition, construction methods, environment and other factors.
Drying time: surface dry: 25min/25¡ãc, hard dry: 48 hours/25¡ãc; recoating: above 2 hours/25¡ãc (drying time will be change because of the different temperature and humidity.)
Packing: 20kg/barrel
Construction condition:
1. 40¡ãc>temperature>5¡ãc.
2. Relative humidity (rh)<85%.
3. Surface humidity <10% .
4. Ph<10.
Shelf life:12 months in sealed cans, away from frost and insolate, the storing temperature shall range 5-35¡ãc.
Please note that:
1. Stir the paint well until homogenous.
2. This product avoid with the polyurethane or mixes in other paint and the powder lot, so as to avoid the phenomenon of yellow.
3. Please make sure the lid tightly closed when not in use to avoid the dust and dirt contamination coating.
Based on emulsion and diversity of natural sand imitate the nature stone, excellent weather resistance and water resistance capability. Natural raw materials nontoxic.
Application:
Applied to residence, hotel, school, office building, landmark of new-built and maintenance engineering of exterior finish. And also widely used in decorate and protect surface of the concrete, cement, brick structure.
Specification:
Sheen: matt & mercerizing
Colour: so many colours for your choise
Theoretical coverage:
0.3m2/time/kg, note: the practical consumption may vary with substrate condition, construction methods, environment and other factors.
Drying time: surface dry: 4hours/25¡ãc, hard dry: 48 hours/25¡ãc; recoating: above 8 hours/25¡ãc (drying time will be change because of the different temperature and humidity.)
Public corridor, staircase, parking, school, hospital and new building or maintenance engineering in interior wall.
Color:
White and others is available, also we can adjusting colour for your needs.
Finish:
Matt
Theoretical coverage:
8 to 10 (m2/kg/coat) note: the practical consumption may vary with substrate condition, construction methods, environment and other factors.
Application method:
Brush, roller, spray
Certificate:
1. Iso9001:2008 2. China environmental certificate
Packing:
20kg/ barrel.
160 m2 to 200 m2/20kg/coat
Moq:
1 ton
Delivery time:
15days after confirm the order
Shelf life:
12 months in sealed cans, away from frost and insolate, the storing temperature shall range 5-35¡ãc
Surface preparation:
1. Remove all loose or powdery paint residue by brushing and scraping with a stiff fiber brush , fill any minor cracks with an appropriate filler, surface should be flat and sanded smooth.
Ature:remove all oil or grease, soluble contaminants and other foreign matter
All surfaces to be coated should be clean, dry and free from contamination
If applied on rusty surface, rusty layer thickness should be below 50mm, other than bottom surface processing requirements, without acid and sandblasting processing, catalytic reaction, to get black protective layer and solvent (acrylic acid, polyurethane, epoxy resin, alkyd resin, amino paint or water-based paint) match well, will not occur and paint color bleeding
Apply in nice weather, don't let coating contact any liquid like water or other solvent before completely dry
No painting be carried out in rainy day outdoor
If above 85% humidity please stop painting
Temperature of substrate should be above 5¡ãc
Lower temperature might not dry or cause long time to dry
•air spray:nozzle orifice range: 1.5 to 2.5mm
Nozzle pressure range: 0.3 to 0.5mpa
•airless spray:nozzle orifice range: 0.4 to 0.5mm
Nozzle pressure range: 12 to 15mpa
•features:brush: use soft brush
Recommended finish: rsl series
Storage temperature: 5 to 30¡ãc in well ventilated warehouse
Stir thoroughly before painting
Don't use any steel or other metal stick to stir paint
Can be applied directly on rusty steel( rust layer ¡ü45um)!
Color and appearance: grey or others
Coating thickness um: 50¡à5mm
Solid content % : 69¡à3%
Overcoating interval: minimum: 4 hours max: unlimited
Recommended substrate conditions and temperature:
1.Remove all oil or grease, soluble contaminants and other foreign matter. All surfaces to be coated should be clean, dry and free from contamination.
2.If applied on the rusty surface, the rusty layer thickness should be below 45 um
3.Apply in good weather, don¡¯t let coating contact any liquid like water or other solvent before completely dry. No painting be carried out in rainy day outdoor , if the humidity is above 85%, please stop painting
4.The temperature of substrate should be above 5¡ãc, lower temperature might not dry or cause a long time to dry
Air spray:nozzle orifice: 1.5-2.5mm
Nozzle pressure: 0.3-0.5mpa
Airless spray:nozzle orifice: 0.4-0.5mm
Nozzle pressure: 12-15mpa
Brush : use soft bursh
Recommended finish: rsl series finish
Shelf life: 12 months
Over coating time
Substrate
Temperature 5¡ãc 15¡ãc 25¡ãc 35¡ãc 45¡ãc
Minimum interval 24hrs 7hours 4hours 3hours 2hours
Maximum interval Unlimited storage temperature : 5-30¡ãc in well ventilated warehouse
Reinforcement filler in elastomers
Rheology and thixotropy control of liquid systems, binders, polymers, etc.
Used as anti-settling, thickening, anti-sagging agent
Improvement of free flow and anti-caking characteristics of powders
High transparency
Disposable painting-overall with hood
-size s, m, l, xl, xxl
-extremely comfortable with elastic sleeves and trouser legs
-abrasion resistant, hard wearing, antistatic, breathable fabric.
-material is polyester
-zipper on the front, hidden
The equipment adopts the resistance heating in the vacuum chamber, to melt and vaporize the metal wire (aluminum wire) cling to the resistance wire. The vaporized metal molecule deposit on the substrates, to gain the smooth film as well as high reflectivity. Thus the surface of the items can be decorated and beautified.
Characteristic: reasonable structure, even film, good-quality film forming, quick pumping speed, the cycle of short, high efficiency and easy operation, low energy consumption and performance advantages of stability.
Applied industry: Widely used in automotive, audio and various small appliances, computers, clocks and watches, toys, cell phones, reflective Cup, cosmetics, toys, tableware, sanitary ware, shoe heel, ABS, PS, PP, PC, PVC, PET, nylon, metal, Boli, glass, ceramics, TPU, etc.
Electroplating effects: general electroplating-face, dumb-(semi-mute, all dumb), the electroplating process wrinkles, lampworking, raindrops, seven colors
Coating color:gold, silver, red, blue, green, purple, multi color, and so on.
Coating color: gold, silver, red, blue, green, purple, and so on.
All vacuum coating machines are environmental prodection products and sooner or later will replace traditional galvanization industrial.
Technical parameter:
Mode
Dimension
ZZ-1200
ZZ-1400
ZZ-1600
ZZ-1800
1200*1400mm
1400*1600mm
1600*1800mm
1800*2000mm
Mainly Application
Plastic decorative coating , glass decorative coating and protective film coating
Film Type
Semitransparent film, non-conducting film, gold, silver, red, blue, green, purple, seven color, etc.
Power source Type
Thermal evaporation power, ion bombard power, RF power
Vacuum chamber structure
Vertical double/single door, horizontal single door, pump system postposition
Ultimate vacuum
8.0*10-3Pa
Vacuum system
Diffusion pump +Roots pump +Mechanical pump +Holding pump
Pump time
Pump from atmosphere to 5.0*10-2, 6 minutes
Workpiece motion mode
Public rotation/Frequency control
Control mode
Manual/Automatic all-in-one mode, Touching screen+PLC
compress air
the pressure is 5~6kg.
water-cooling system
Cool water 5~25 supplier, the flux is 5T/H and the pressure is 0.15~0.25MPa.
Features
Bright delicate aluminum coating, coating speed, simple operation, equipment stability, and the production of high-grade plastic decoration products indispensable a necessary equipmen
Ceramic gold coating machine can coat tin, tic, zrn, crn, ti, ni, cr, cu and other compounds film, multi-layer super-hard film, nitrogen-doped titanium film and the alloy film, and in a very short time to complete all the machining process, it is a highly efficient multi-functional coating equipment.
Property:
1. Excellent chemical resistance
2. Excellent electric insulativity
3. Excellent adhesive force
4. High degree of hardness - good mechanical property
Application used for :
1. Coating metal cabinets,
2. Electric distribution boards,
3. Lighting components,
4. Metal shelves,
5. Air conditioners,
6. Office furniture.
Solidifying condition: 20min/180-190 degrees.
Trademark: rengui
Packing: 20kgs/carton or 25kgs/carton
Origin: china
Production capacity: 600 tons/month
25kgs/carton, sealed plastic bags with brown carton
Property:
1. Excellent chemical resistance
2. Excellent electric insulativity
3. Excellent adhesive force
4. High degree of hardness - good mechanical property
Application used for :
1. Coating metal cabinets,
2. Electric distribution boards,
3. Lighting components,
4. Metal shelves,
5. Air conditioners,
6. Office furniture.
Solidifying condition: 20min/180-190 degrees.
Trademark: rengui
Packing: 20kgs/carton or 25kgs/carton
Origin: china
Production capacity: 600 tons/month
Property:
1. Excellent chemical resistance
2. Excellent electric insulativity
3. Excellent adhesive force
4. High degree of hardness - good mechanical property
Application used for :
1. Coating metal cabinets,
2. Electric distribution boards,
3. Lighting components,
4. Metal shelves,
5. Air conditioners,
6. Office furniture.
Solidifying condition: 20min/180-190 degrees.
Trademark: rengui
Packing: 20kgs/carton or 25kgs/carton
Origin: china
Production capacity: 600 tons/month
Plative PLP4500 plating layer protective paint
Brief description
Plative PLP4500 plating layer protective paint, is designed to protect the plating layer by improving abrasion resistance, scratch resistance, chemical corrosion resistance, insolation and heat stability.
The paint of transparent has no effect on the color of plating layer, besides the paints of colorful can make the plating layer with different coloration.
Operational guidance
Prefabricated, diluted plative PLP4500 to a proper consistency and add 15% -25% to total plative SN30, mix completely.
Clean and dry the plating layer, make sure no oil, no dust. To paint the layer with prepared paint by spraying, immersion or drawing. Then forced dry at 120 ¡æ in 50 minutes, or air dry in more than 12 hours.
Annotation
Before use, low-speed mixing of plative PLP4500 is required; dilute the product with special solution alative PLP4500, or else it could lead to paint deterioration.
Plative PLP4500 plating layer protective paint
brief description
Plative PLP4500 plating layer protective paint, is designed to protect the plating layer by improving abrasion resistance, scratch resistance, chemical corrosion resistance, insolation and heat stability.
The paint of transparent has no effect on the color of plating layer, besides the paints of colorful can make the plating layer with different coloration.
operational guidance
Prefabricated, diluted plative PLP4500 to a proper consistency and add 15% -25%to totalplative sn30, mix completely.
Clean and dry the plating layer, make sure no oil, no dust. To paint the layer with prepared paint by spraying, immersion or drawing. Then forced dry at 120 in 50 minutes, or air dry in more than 12 hours.
Annotation
Before use, low-speed mixing of plative plp4500 is required; dilute the product with special solution alative PLP4500, or else it could lead to paint deterioration.
Plative DPP3800 deplate protective paint
Brief description
Plative DPP3800 deplate protective paint, the paint is prepared from a special process with special resins, special solution and other materials. Specific features are no affect on plating coat, acid and alkali resistance, against corrosion, and so on. Commonly used in deplating process where can protect the plating coat from damage. The plating coat such as aluminum, nickel, copper, tin, chrome and so on.
Operational guidance
First, to clean and dry the plating layer, make sure no grease, no dust. Second, to paint the surface where prevent from being processed next (alative DPP3800 can be used to dilute the product). Then forced dry at 70 before deplating. After deplating, the coating can be cleaned or not, with special cleanser.
Annotation
Before use, low-speed mixing of plative dpp3800 is required; dilute the product with special solution alative dpp3800, or else it could lead to paint deterioration.
Brief description
Plative PPC7703, the peelable protective paint, is specialized applied to protect the based design of workpiece form destruction of post-processing. Acid or alkali resistance, corrosion resistance, good adhesion, and fast-drying, peeling easy.
Operational guidance
First, to clean and dry the surface, make sure no grease, no dust. Second, to paint the surface where prevent from being processed next (alative T7703 can be used to dilute the product). Then, forced dry at 70 before post-processing. After processing, the coating can be manual stripping, or peeled with adhesive tape.
Annotation
Before use, low-speed mixing of plative PPC7703 is required; dilute the product with special additives alative T7703, or else it could lead to paint deterioration; the film with a certain thickness, is in order to peeling easy after printing.
Plative PPC7703, the peelable protective paint, is specialized applied to protect the based design of workpiece form destruction of post-processing. Acid or alkali resistance, corrosion resistance, good adhesion, and fast-drying, peeling easy.
Operational guidance
First, to clean and dry the surface, make sure no grease, no dust. Second, to paint the surface where prevent from being processed next (alative T7703 can be used to dilute the product). Then, forced dry at 70 before post-processing. After processing, the coating can be manual stripping, or peeled with adhesive tape.
Annotation
Before use, low-speed mixing of plative PPC7703 is required; dilute the product with special additives alative T7703, or else it could lead to paint deterioration; the film with a certain thickness, is in order to peeling easy after printing.
Plative ISP3320 anodizing protective paint
Brief description
Plative ISP3320, a kind of antioxidant protective paint, is specialized applied to anodizing treatment. Strong acid resistance such as hydrofluoric acid, concentrated sulfuric acid. Good adhesion. Good leveling
Operational guidance
First, to clean and dry the surface, no oil slicks, no dust. Second, to paint the surface where prevent from plating or pickling next (the corresponding additives can be used to dilute the product) painting by screen printing, pad printing, scratch, dipping, or spraying. Then 160-200heat cured in 20-30 minutes. To clean the coating with the corresponding removers after anodizing.
Annotation
Considering the painting method, please dilute the product to appropriate viscosity before use please use the corresponding thinners, or else it could lead to paint deterioration; during operation, please keep the environment ventilation to prevent inhalation.
Plative ISP3320 anodizing protective paint
brief description
Plative ISP3320, a kind of antioxidant protective paint, is specialized applied to anodizing treatment. Strong acid resistance such as hydrofluoric acid, concentrated sulfuric acid Good adhesion. Good leveling
operational guidance
First, to clean and dry the surface, no oil slicks, no dust. Second, to paint the surface where prevent from plating or pickling next (the corresponding additives can be used to dilute the product)painting by screen printing, pad printing, scratch, dipping, or spraying. Then 160-200heat cured in 20-30 minutes. To clean the coating with the corresponding removers after anodizing.
annotation
Considering the painting method, please dilute the product to appropriate viscosity before use; please use the corresponding thinners, or else it could lead to paint deterioration; during operation, please keep the environment ventilation to prevent inhalation.
