Find Verified Grated Coconut Suppliers, Manufacturers and Wholesalers

Marine gratings and marine grilles fully comply with CBT608 and CBT615.

Steel and stainless steel gratings are produced mainly by welding. First, we will punch or slot the flat steel, then place the crossbar into the hole for spot welding. Each contact point of the cross bar and the flat steel is properly welded. The crossbar can also be welded by spot welding. welding staff have the top grade industry profession certification

The base of the grilles or gratings could be material of steel ASTM A36, stainless steel 1cr18ni9ti, FRP,polyester and etc.

Our new product molded polyester grating is using glass fiber as the reinforcing material, using the unsaturated polyester resin as substrate and then specially processed and compounded to be strong and anti-slip.

Our grilles could be used as bilge suction grilles for shipbuildiing, deck walkway gratings, Marine submarine door grilles and etc.

The equipment takes agricultural and forest waste, such as rice husk, wood chips, coconut fiber dust, saw dust and crop stalks etc as the raw biomass fuel. These biomass fuels will be gasified into rough gas in the Gasifying Furnace, which is our patented product. Then after a series of cleaning and cooling treatment, the purification of the gas will be pure enough to meet the requirement of gas needed by the internal combustion engine to generate electric power.
Available biomass fuels:
Agriculture and forest residues, such as rice husk, crop stalks coconut fiber dust, palm shell, pruned fruit tree branch, wood chips, chips from timber processing factory and so on.
Biomass gas from Fengyus fluidized bed can not only be sent to internal combustion engine for electric power generation but can also be used for household fuel to cooking and heating. It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying
Index:
Model:LHC-100 LHC-300
Generator rated output power:100-300KW
Production volume of biomass gas 2250Nm/3hr
Gas temperature of the outlet after cleaning and cooling:under 45 degree celsius
Consumption of biomass fuel:0.9-1.8ton/hr(for rice husk)
Weight:2.0-3.8ton
Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel gasification method, the caoricity of biomass of gasification is normally 1100-1500kcal/Nm3.(4.6-6.3MJ/Nm3)
Biomass gas component:
CO:17.2%
H2:4.05%
CH4:6.82%
CmHn:1.24%
H2S:----
CO2:15.1%
O2:0.8%
N2:54.7%.

TUF Marine Anti-glare solar screen blind is produced with high-performance composite film and materials. Therefore they can reduce most sun glare and harmful UV radiation with improved visibility and provide lasting service on ships/boats/offshore platforms.

TUF Marine anti-glare solar screen is available with self locking type and electric control type.

The produced screens will be packed in pallet which is safe and suitable for air or sea transport.

Description:

This grinder is an ideal machine for farm and sideline products (such as rice, wheat, soybean, groundnut, coconut, coffee seeds, spices, and so on) processing in rural farmer houses or small plant.

It could be used for:
Processing of grain-shaped and flaky feedstuff, such as un-full paddy, paddy shell, groundnut shell or bean shell.
Processing of stem-shaped feedstuff, such as maize stem, kaoliang stem, rice straw and groundnut vine, which should be cut into segments before processing.
Processing of block-shaped feedstuff, such as dry sweet potato, dry cassava, and corn cob.
Processing of chief or miscellaneous grain crops, such as maize, wheat, kaoliang and rice.
Processing of others, such as Chinese herb, self-made fertilizer.

Main features:
small volume and light weight
high efficiency and being easy for maintenance.
easy to be operated and moved,
low power consumption.

Power generation by using biomass gas from rice husk, wood chips, saw dust, coconut husk, bagasse, straw and crop stalks can not only save electricity expenses in the production cost for rice mills and timber processing mills, but can also get benefits from the selling of surplus electric power to the power grid. Our biomass gasification equipment enjoys high conversion efficiency, by taking rice husk as an example, each kwh power generation consumes only 1.6~1.8kg rice husk, and the unit fuel consumption will be lower if wood chips or crop stalks are used. Water used for gas cleaning and cooling can be reused in a circulating way after being treated through water treatment facilities such as sediment ponds. It creates no environmental pollution and little make-up water will be needed. The water pond for each unit of 200kw plant only covers about 50m2 .The engines group and electrical equipments should be put indoors, and the other equipments could be put outdoors. The construction area for each 200kw generator set is approximately 40~50m2. The full set of equipment consumes only 5~8% of the generated power. Therefore, such a project is an ideal one with significant benefits for the area where there is a lot of discarded biomass resources but lack in electric power supply or with higher electricity expense. In general, the investment in the major equipment can be recovered from power generation benefits within the first two years. The equipment can be safely and reliably operated with operational technology. Its easy to be mastered by workers. The maintenance and repair work is similar to ordinary diesel generators.

Power generation by using biomass gas from rice husk, wood chips, saw dust, coconut husk, bagasse, straw and crop stalks can not only save electricity expenses in the production cost for rice mills and timber processing mills, but can also get benefits from the selling of surplus electric power to the power grid. Our biomass gasification equipment enjoys high conversion efficiency, by taking rice husk as an example, each kwh power generation consumes only 1.6~1.8kg rice husk, and the unit fuel consumption will be lower if wood chips or crop stalks are used. Water used for gas cleaning and cooling can be reused in a circulating way after being treated through water treatment facilities such as sediment ponds. It creates no environmental pollution and little make-up water will be needed. The water pond for each unit of 200kw plant only covers about 50m2 .The engines group and electrical equipments should be put indoors, and the other equipments could be put outdoors. The construction area for each 200kw generator set is approximately 40~50m2. The full set of equipment consumes only 5~8% of the generated power. Therefore, such a project is an ideal one with significant benefits for the area where there is a lot of discarded biomass resources but lack in electric power supply or with higher electricity expense. In general, the investment in the major equipment can be recovered from power generation benefits within the first two years. The equipment can be safely and reliably operated with operational technology. Its easy to be mastered by workers. The maintenance and repair work is similar to ordinary diesel generators.

Power generation by using biomass gas from rice husk, wood chips, saw dust, coconut husk, bagasse, straw and crop stalks can not only save electricity expenses in the production cost for rice mills and timber processing mills, but can also get benefits from the selling of surplus electric power to the power grid. Our biomass gasification equipment enjoys high conversion efficiency, by taking rice husk as an example, each kwh power generation consumes only 1.6~1.8kg rice husk, and the unit fuel consumption will be lower if wood chips or crop stalks are used. Water used for gas cleaning and cooling can be reused in a circulating way after being treated through water treatment facilities such as sediment ponds. It creates no environmental pollution and little make-up water will be needed. The water pond for each unit of 200kw plant only covers about 50m2 .The engines group and electrical equipments should be put indoors, and the other equipments could be put outdoors. The construction area for each 200kw generator set is approximately 40~50m2. The full set of equipment consumes only 5~8% of the generated power. Therefore, such a project is an ideal one with significant benefits for the area where there is a lot of discarded biomass resources but lack in electric power supply or with higher electricity expense. In general, the investment in the major equipment can be recovered from power generation benefits within the first two years. The equipment can be safely and reliably operated with operational technology. Its easy to be mastered by workers. The maintenance and repair work is similar to ordinary diesel generators.

Application

Series COP oil recycling machine is mainly used for purifying UCO used cooking oil, vegetable oil, KFC oil, edible oil, rape oil, sesame oil, peanut oil, coconut oil, beam oil, kitchen oil, bio-diesel oil, plant oil, wood oil etc. It dewaters, deodorizes, and eliminates impurities highly effectively. According to the cooking oil nature, the used cooking oil includes high content water, more acid matters, much impurity and offensive odor. This machine adopts plate pressure system and can separate the impurities and water from the oil quickly and effectively. Added two primaries filter and fine filter, it can remove impurities thoroughly. And the machine adopts high vacuum system to dewater and deodorize. In addition, this machine uses stainless steel filter elements, which resists the acid in oil strongly. After the used cooking oil is recycled by machine, it will become clear and fresh.


Features

1. Highly effective vacuum dewatering, deodorizing, and impurities removing system.
2. It adopts plate pressure system with the strong ability to filter the particles and impurities completely.
3. It has the back flush system which can clean the filter elements automatically.
4. We uses stainless steel filter element which has a good anti-corrosive performance. Especially, the precision of eliminating impurity is high and the service life is long. Also, it has large volume for holding the impurities.
5. Unique degassing and dewatering system: Using 3D-Evaporation technical and thin film evaporation, which can separate the trace water, soluble water and gases from the oil quickly by the Multi-level water-oil separation technology.
6. Hi-automatically operated, convenient, reliable, and safe.

Solid Palm Oil Treatment Plant,Animal Cooking Oil Decolor Purifier
Cooking Vegetable Oil Cleaner

TYD series oil decoloration machine can quickly remove out impurities, water, gases and recover the oil color to original color.
This machine uses our special additive to discolor, which is purely natural and has high efficiency.
It is installed thermal insulation material, it is a good oil purifier for solid oils,animal oil
It can treat cooking oil,Palm Oil,Animal Oil, coconut oil in oil field, mine, metallurgy, electricity, transportation, manufacturing, food industry. The treated oil is very clear and transparent.

And it is asked by customer to pre-treat the used cooking oil before further biodiesel.

Features:
1.It is installed with thermal insulation material, it is a good oil purifier for solid oils,animal oil
2.This machine adopts the the latest micro-filtration technology,which is a multi-functional purification system with vacuum oil filter, fine filter and decoloring device.
3.It uses pure physical treatment to remove water, gases, impurities and decolor,which will not affect the composition and performance of the oil.
4.Equipped with chain protection device, the machine is easy to operate, safe and reliable.
Parameters Unit TYD-1 TYD-2 TYD-3 TYD-5 TYD-10 TYD-15 TYD-20 TYD-30 TYD-50
Treatment Capacity Ton/day(8 hr)) 1 2 3 5 10 15 20 30 50
Power Supply 380V/50HZ/3PhaseCustomizable
Working Noise dB(A) 65
Trouble-free Working Time H 4000
Continuous Working Time H 150
Inlet (outlet) caliber mm 25 25 25 32 42 42 50 50 60
Weight kg 1500 2000 2500 3000 3500 4000 4500 5000 5500
Size Length mm 1800 1850 1900 1950 2000 2200 2300 2400 2500
Width mm 1300 1350 1400 1450 1500 1600 1600 1700 1800
Height mm 2300 2300 2300 2400 2500 2700 2700 2700 2700
Guarantee value Color L 1-3
Impurity m 1(Customizable)
Water ppm 100
Gas content 0.1% 15(GB/F 7305)
Cleanliness grade 6(NAS1638)

Our company export all kinds of Oil Purifier Machine we have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ect. Please feel free to contact us.

Cooking Oil Filtration Machine for Series COP
Cooking Vegetable Oil Cleaner

Cooking Oil Filtration Machine for Series COP

The cooking oil filtration machine is special for filtering used cooking oil, Coconut Oil,dirty vegetable oil , groundnut oil, olive oil,palm oil etc.
It can remove particle ,separate moisture, gas, free fatty acids, volatile odoriferous material,odor, and wax, foam in the waste oil.
The treated oil is clean, limpidity, and good smell. It is a good purification machine for Fry food factory, oil restaurant, cooking oil factory, biodiesel factory,vegetable oil factory, and waste oil collecting store.
According to the treated oil usages, you can choose different machine body. For edible usage, we suggest you choose stainless steel body; For industrial use, we suggest you choose carbon steel body. If your oil contains too many impurities,we suggest you choose a press filter.

Feature:
1.Strong ability to filter the impurity,strong capability of breaking emulsification. We adopt the high quality filter materials, which has a good function in anti-corrosive, thermos table, mechanical strength. Especially, the precision of eliminates impurity is high and the service life is long. Also, it has a large volume for storing the impurities.
2.The combination of coalescing separation and vacuum dewatering
3.Advanced dielectric condensation device
4.With H.P.M high polymeric absorbing material
5.Using the 3D Stereo-Evaporation technology, which can separate the odor and gas from the oil quickly .
6.This machine installs the new pressure protector, which can control the temperature automatically; also it can drain water on line by the waterseparator device. So it is easy to control this machine.

Parameters
Item Unit COP-10 COP-20 COP-30 COP-50 COP-100 COP-150 COP-200 COP-300
Flow Rate L/min 10 20 30 50 100 150 200 300
Work Vacuum MPa -0.06 ~ -0.095
Work Pressure MPa 0.4
Temperature 0 ~ 100
Power supply 380V,50Hz, 3 phase (or as needed)
Work noise dB(A) 75 75 75 78 78 78 80 82
Heating power KW 36 40 45 72 80 90 120 135
Total power KW 38 42 47 75 87 101 135 147
Inlet/outlet mm 25 25 25 32 42 50 50 60
Net weight Kg 450 550 600 750 850 1000 1200 1500
Dimensions mm 1500 1000 1200 1500 1050 1600 1500 1050 1650 1600 1150 1700 1750 1250 1800 1900 1600 1950 1900 1700 2000 2100 1700 2100
Guarantee Value
Item Guarantee indexes
Moisture content 20 PPM
Demulsification value New oil15min,running oil30min
Impurity size 1 micron (no free carbon)
Gas content 0.1%
Clean degree 4 Grade (NAS1638)

Our company export all kinds of Oil Purifier Machinewe have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ETC. Please feel free to contact us.