Low Noise, water heater boosting pump:
High efficiency motor and rotor design,30% higher efficiency than competitors with similar size.; 5DB adopting ultra-quiet design,noise 5db lower than industry average; No leakage.More reliable,static sealing design,imported Japanese,strict testing,no leakge forever.
Typical application: water heater recirculating system; intelligent toilet; heating system,gas boiler, boosting applications;
Max flow rate(L/Min) 24L/Minute; Max water head:11 M; Voltage:12V/24V;Current:2.2A,2.8A,1.5A; Power:26.4W,34W,36W,48W
Dc Pump, Bldc Pump, Foc Pump, Pmsm Pump, Small Water Pump, 24v Electric Water Pump, Car Water Pump, Mini Water Pump, Electric Car Pump, Solar Water Heater Pump, Miniature Water Pump, Hot Water Circulation Pump, Solar Pump, Brewing Pump, Submersible Dc Water Pump, Gas Boiler Pump, Water Transfer Pump, Automotive Electronic Pump.
PQWT-CL300 series underground pipes water leak detector, is high performance leak detection equipment, has powerful anti-jamming and data processing capabilities, you can make your work easier. It has the following main features.
Main Features
1.The use of latest digital signal processing chip and a digital filter chip, 16M cache controller integrated, more responsive. In particular, it can filter with the interference of environmental noise, screening out the leakage noise, allowing the operator to lock leakage points quickly.
2. 7-inch high-definition digital color LCD touch screen with a resolution of 800 * 480, can provide 8 display pages, can show the measurement parameters more clearly and intuitively, and full touch screen design, simple operation.
3. 50 ~ 2500Hz frequency range (spectrum analysis), real-time display of the noise signal distributed on each frequency.
4.Sensor is built-in preamp circuit, using a rubber ring seal and cushion, and the application of professional acoustic methods, making the ability to capture the noise is higher than similar products.
6.Save 8 sections totaling eight minutes of recording, which is not lost after shut down, could be analyzed at any time.
7.Using a large capacity battery, can work for more than ten hours , and can be removed charging and online charging.
8. Super anti-jamming circuit design, digital signal and analog signal effectively isolate and eliminate the noise generated by the digital circuit .
Model No. :PQWT-CL300
Measuring Depth :2 meter
Frequency Range: 50-2500HZ
Audio Amplifier Gain: Adjustable within the class of 100
Operation Mode :Spectral Analysis,Filter Analysis ,Fine Mode
LCD :7-inch Touch Screen
Power Supply : 12V 3600mAh Rechargeable Battery
Black chrome plated aluminum solar energy absorber part
It's used as a main part of solar absorber with black chrome , which remarkably improves light performance of solar absorber and is clearnly produced.
Parameter list
1Width110~250mm (4.33~9.84in)
2LengthCustomized
3Thickness0.0118in/0.0157in
4Place of originChina (mainland)
5Brand nameGk
6CertificationIso9001:2008;patent for invention
7Service life10 years
8CategorySolar absorber part
9Substrate materialAluminum
10Light performance indicatorAbsorptivity=96%
11Emissivity=10%
12Corrosion resistanceSalt-fog test=72h
13Anti-fatigability and heat&humidity resistanceHeat and moisture test=72h
14Cohesive forceConforming to gb5270-85
15PortShenzhen
16Moq100 square meters
17Supply ability120000 square meters per month
18Payment termsL/c, d/a, t/t, western union, moneygram, escrow
19Packaging detailsWooden box
20Delivery detailsWithin 7 days upon the receiption of deposit or l/c at sight
Wastewater Treatment Plant we facilities designed to treat municipal Wastewater. The level of treatment at a plant will vary based on the BOD limits(3-5 PPM) and the specific processes involved. This property use is intended for primary, secondary, and advanced treatment.
It is used for the solution treatment of titanium alloy in aerospace industry, such as TC4, TC16, TC18, TC21, beryllium bronze in aircraft instrument elastic elements; precision alloy in aircraft sensor like Ni-based and Co-based high elastic alloy 3J1, 3J21, Ni-based constant elastic alloy 3J53, stainless steel in the field of nuclear energy like17-4PH, 410.
High pressure water atomizing process (high pressure water atomization production line) is an environmental production mode of metal powder. With government support, this new materials industry have good prospects. ACME have been engaged in copper-based powder production line, copper heat pipe production line, high-pressure water atomization steel powder production line, water atomization iron powder production line for many years.
Fter processing by the control instrument and convert into the quantities, so as to realize the continuous measurement of material level, improve the reliability and makes it very easy to installation and debugging
Iii.Product features:
*simple calibration: can use any of the two points of any warehouse height automatically complete the calibration
*strong adaptability:can work reliable under high temperature, high pressure, strong corrosion, strong adhesion and strong dust environment.
*no maintenance: because simple structure of the sensor and no moving parts, so once put into operation , it no need to maintenance.
*widely used: liquid, solid, interface mixture, material etc.
*lcd display: adopt lcd, display rich and comprehensive content.
*no drift: no drift because the medium of the temperature or density changed.
*reliable life: unique technology ensures the long service life of the instrument to15 years
I.Measurement principle:
Transmit very low energy and very short microwave pulse then transmitting and receiving by the antenna system.Radar wave are running at the speed of light.Running time can be transformed into material level signal by electronic parts.A special type of time extension method can guarantee the stability and accurate measurement in a very short time. Even if the condition is complex , has false echo, can accurately analyze the level of the echo with the latest micro-processing technology and debugging software.
Power supply: two lines(dc24v) four lines(dc24v/ac220v)
The scene display: four figure lcd(programmable)
Shell: optional
Process connection: screw thread/flange(optional)
The antenna:bellmouth (stainless steel 316l)
The ball float liquid level controller output 4 ~ 20 ma stadard current signal and matching with the iii type electric instrument, which can realize the automatic detection , control and record for the liquid level. The liquid level transmitter is suitable for oil refining industry, chemical industry, paper making, food and pharmaceutical industries, and applicable for the medium liquid level measurement such as sewage and all kinds of exposure or pressure containers, for underground storage tanks and high-level water tank level measurement are ideal. Liquid level
Working temperature:¡ª40~+60¡æ
Load resistance:620¦¸
Voltage supply:24vdc
Outlet joint: internal screw thread m20¡á1.5
Connecting flange:hg20592~20635£97 dn150 pn1.6¡¢2.5mpa,
Other flange standards such as gb£¬hgj£¬ansi of the users indicate.
Anti-explosion sign: flameproof type diibt4
Material of the float ball:0cr18ni9, ptfe
KeenSen BW and FR Series: Brackish Water and Fouling Resistant RO Membrane Element
Model No.:BW-8040/4040, BW-8040FR/4040FR(Fouling Resistant)
Usage:It is applicable to the desalination of surface water, groundwater and water treatment with salt concentration between 2000 and 8000ppm. It can be widely used in the medicine, chemical industry, beverage, electricity and other various industries etc.
Operating Limits and Conditions of Membrane Element
Max. Working Pressure
600 psi(4.14MPa)
Max. Feed Water Temperature
45
Max. Feed Water Flow
17.0m3/h(8040),3.6m3/h(4040)
Max. Feed Water SDI15
5.0
Free Chlorine Concentration of Feed Water
0.1mg/L
pH Range of Feed Water during Continuous Operation
3-10
pH Range of Feed Water during Chemical Cleaning
2-12
Max. Pressure Drop of Single Membrane Element
10psi(0.07Mpa)
KeenSen BW and FR Series: Brackish Water and Fouling Resistant RO Membrane Element
Model No.:BW-8040/4040, BW-8040FR/4040FR(Fouling Resistant)
Usage:It is applicable to the desalination of surface water, groundwater and water treatment with salt concentration between 2000 and 8000ppm. It can be widely used in the medicine, chemical industry, beverage, electricity and other various industries etc.
Operating Limits and Conditions of Membrane Element
Max. Working Pressure
600 psi(4.14MPa)
Max. Feed Water Temperature
45
Max. Feed Water Flow
17.0m3/h(8040),3.6m3/h(4040)
Max. Feed Water SDI15
5.0
Free Chlorine Concentration of Feed Water
0.1mg/L
pH Range of Feed Water during Continuous Operation
3-10
pH Range of Feed Water during Chemical Cleaning
2-12
Max. Pressure Drop of Single Membrane Element
10psi(0.07Mpa)
Faq
1. How can i know your factory can produce equipment i need?
Re: contact us and let us know your requirements of equipment. Then we will send these requirements to our technical department. So we will know whether our factory can offer you equipment or not.
2. Do your company customize equipment for customer?
Re: yes, we can customize equipment according to customers' requirements
3. Are your company factory or trade company?
Re: we are factory in hunan province, china.Welcome to visit our factory!
Company information
Our location, factory, clients, certifications
Sps10
Traditional
Electrical make-andbreak type, but is according to warm controls the request continuously automatic control thermal rating.
Is high to the high efficiencytemperature control precision, does not have the noise, does not have the disturbance to internal electrical network
1.sintering and thermal treatment of hard alloy products.
2.precise temperature control.
3.non-protective gas operation.
Vacuum Sinter Furnace is mainly used for the sintering and thermal treatment of hard alloy products. In operation, the sintering process is accomplished under vacuum state. The product features its precise temperature control, even inner temperature, non-protective gas operation, high performance and stable quality. This sintering equipment is suitable for hard alloy industry.
Place of Origin Hunan, China (Mainland)
Brand Name GaoXin
Model Number GXZK-50
Usage Sintering Furnace
Type Other
Condition New
Type Furnace
Processing Type Machining Equipment .
1076 Electric Water Heaters Suppliers
Short on time? Let Electric Water Heaters sellers contact you.
