The S6022 flow switch use a variety of paddle sizes to respond to fluid flow rates in applications with pipe size greater than 1 inch trade size.
These paddle-type flow switches are designed for pipe fluid flow indication. Suitable fluids include water, ethylene glycol solutions and fluid not harmful to brass or phosphor bronze or classified as hazardous fluid.
A 3-piece stainless steel paddle kit is included allowing effective installation in variety of pipe size and fluid flow conditions.
Single-pole, Double-throw (SPDT) open-low versions of these flow switches are available
MAIN FEATURES:
OLED color display, easy to read
SpO2, PR, Pl and bar graph can be displayed on the screen
Automatically power off within 8 seconds when no finger detected.
Low power indicator
4 Kinds of color available (Blue, Green, Cyan and Yellow)
The system is capable of producing bright and long oxygen-free copper rod, copper tube, flat copper bar and other special shaped copper material from cathode copper, and the copper rod diameters are from 8mm to 30mm. Total annual capacity is from 2000 MT to 10000MT.
Technical parameter of final product:
Density: 8.9 g/cm3 Tensile strength: 170N/mm2
Elongation at break: >35% Conductivity of soft wire: í¦100% IACS
Oxygen content: í_10ppm
Alloy steels are what they sound like: Steels that include specified amounts of alloying elements. Generally, alloying elements make steels stronger and more resistant to impact or stress. While the most common alloying elements include nickel, chromium, molybdenum, manganese, silicon and copper, many others are used in the production of steel.
High-alloy types of steel are favored in the piping industry for service in extreme conditions, whether it be in hot or cold conditions or subject to rough use. Thatâ??s because the combination of chemistry and proper heat treating can yield strong yet ductile pipe that can take a beating. The oil & gas and power generation industries often favor alloy pipe due to its toughness.
348 Nickel Bars Suppliers
Short on time? Let Nickel Bars sellers contact you.
1. 15.6 Android system touch screen,with wifi and Bluetooth
2. USA coherent diode laser bars
3. Germany imported water pump, no noise and long time
4. Japan imported cooling element, can be used for 5-6 years
5. Energy value temperature value display on handle screen
6. TEC air cooling systemï¼?36 hours work without stopping
7. Fast-safe-non invasive, reliable treatment
8. Strong energy output 1-200J
CAC(copper-aluminum-copper) tube is used to connect the air conditioner's indoor and outdoor unit. Both end of the CAC tube is copper tube, in the middle is Aluminum tube, copper tube and aluminum tube are welded together by a special welding technic. So the cost of CAC tube is much less than the copper tube. Aluminum tube wall thickness is 1.5 times of copper tube, combine our outstanding welding technic, the service life of CAC tube is more than 20 years, it totally reach our standard requirement.
Application:
For the production of copper flat strip, copper busbar, commutator connect, trolley contact wire, and other solid copper conductor. Widely used in the area of transformer, motor, switch, commutator manufacturer and the railway transportation, civil train tracks.
Advantages:
Feed stock can be pure copper or copper alloy
Greatly reduced the feedstock wastage, high utilization
Neither heating nor annealing process, less energy cost
One feedstock size, one process for different sizes of products
No limit on the length of the product, high product efficiency and automation
Optimized equipment design enable a less land consumption and less investment in land and its plant construction
Smooth surface, no peel and no burr defect which can completely meet the requirements of magnetic wire
Conductivity and mechanical properties are improved by hot deformation which promoted its density and crystallization
Constant quality
Both aluminum and copper flat strip production on same machine production
Twin hole die, suit for smallest strip production
We are glad to introduce our Profile Extrusion Line (Extrusion press) to you as an effective system for aluminum (alloy) profile and copper (alloy) profile (window & door profiles, industrial profiles, heat exchange, rod, tube, wire, busbar, strip etc) production.
Our extrusion machine capacity starts from 300MT to 3600MT, for aluminum (alloy) and copper (alloy) production. Extrusion type: Direct extrusion, indirect extrusion, direct and indirect combined extrusion press. Pumps: Germany REXROT, Japan YUKEN, American VICKERS for your choice. With tailored design according to customerí»s specific requirement, we are confident that whatever you want, our production line can exact meet your production requirements.
Application:
The NJR81 integrated rebar locator is used for detecting the rebar location, rebar distribution, concrete coating thickness and the rebar diameter. It can correctly find the steel bar position. It has image scanning method to display the rebar directly with photo, grid scanning method and section scanning method to show the distribution
Features:
1. It has image scanning method to display the rebar directly with photo;
2. It has grid scanning method and section scanning method to show the distribution;
3. It can test the steel bar grid and density with high precision;
4. The detected position will be under the instrument center position, so the testing will be more stable and easy;
5. It adopts Multi-coil structure to confirm the rebar position more correctly
6. With the horizontal and vertical laser light, can fix the scanning direction;
7. The removable battery can make testing continue without no stop
8. 2.8inch screen can show the tested data and image clearly.
9. The ARM high speed Acquisition System can confirm the testing more faster and stable
10. Integrated design, the operation will be more easily, Small size, can be suitable for any position;
11. Powerful Windows data process and analysis software can display analysis result by diagram. Test data can be exported to word or Excel easily.
Parameters:
1 Applicable Rebar diameter range �?6mm to �?50mm
2 Concrete coating thickness test range 2mm to 100mm;5mm to 200mm
3 Rebar diameter test range �?6mm to �?32mm
4 Rebar diameter error +/- 1 grade
5 Power Li battery
6 Acceptable max error for coating thickness test Test rangeï¼?�±1 2 to 80; �±2 81 to 120; �±4 121 to 200ï¼?
7 Applicable environmental Temperature: - 10â??~+40â??; humidity: <90%RH; EMI: no Strong electromagnetic field
BARRED TEE
Description
Product type Pipe fitting
Product name BARRED TEE
Product Class Lateral tee, Y tee, Reducer Tee, Straight Tee, Base Tee, Barrier Teeï¼? Stengthen Tee
Produce thnologe Samless, Welding
Size Samless size from DN15-DN700; Welding size:DN200-DN2000
Thickness SCH10ï¼?SCH20ï¼?SCH30ï¼?STD,SCH40ï¼?SCH60ï¼?SCH80ï¼?SCH100ï¼?SCH120ï¼?SCH160ï¼?XS, XXS HIGH THICKNESS TO 80MM
Material Materials :
* A234 â?? WPB WP5, WP9, WP11, WP22
* A420 - WPL3/ WPL6
* A403 â?? WP304/L; WP316/L
* A860-WPHY 42-46/52-60/65-70
Special Materials such as Monel, Inconel, Cu-Ni, Duplex SS etc are available on request
Standard ASME B16.9
Face Coatings: Special Coating i.e. Cement Mortar Lining, FBE Coating, Galvanized (Hot Dipped Electro-Plating) etc. can be provided
Name: Space bar saddle
Standard: BS4568
Use: for cable management system.
Size: 20mm 25mm 32mm 40mm and 50mm
MOQ: 30000pcs
Finish: hot dip galvanized and pre-galvanized
Specifications
� grade: alloy steel
� standard: aisi, astm, bs, din, gb, jis
� od:10-500mm
� thickness: max:800mm
� width: 205mm~2300mm
� length: 1000mm~6000mm
� place of origin: china (mainland)
� model number: 1.7220 / scm430 / 30crmo4 / 4130 ; 4140/42crmo4/1.7225; en24 34crnimo6 1.6582 4340.
� application: mould steel
� technique: forged
� special use: mold steel , statically and dynamically stressed components for vehicles, engines and machines. For parts of larger cross-sections, crankshafts, gears.
� shape: round bars/flat bar/plate
� technology: hot rolled/forged/cl od d
raw
� heat treatment: annealing/q+t
� surface treatment:black/peeling/polishing/machined
� delivery condition: hot rolled or forged/ peeled or black surface/annealed or qt
� customer's logo: available
� test: sgs/ut100%/elements testing
� certificate: iso/mill certificate
� experience: ten years manufacturer experience
A sway bar link is an auxiliary elastic component in automotive suspension.
Function: To prevent excessive lateral tilting of the vehicle during turning and to maintain balance as much as possible. The purpose is to prevent cars lateral tilting and improving smoothness.
A sway bar link is an auxiliary elastic component in automotive suspension.
Function: To prevent excessive lateral tilting of the vehicle during turning and to maintain balance as much as possible. The purpose is to prevent cars lateral tilting and improving smoothness.
348 Nickel Bars Suppliers
Short on time? Let Nickel Bars sellers contact you.
