Find Verified Lead Pipes Suppliers, Manufacturers and Wholesalers

We can provide all kinds of pipes including: FRP pipes
Oilfield: sewage delivery pipeline, crude oil delivery pipeline, etc.
Chemistry: anti-corrosion pipe in chemical plant, pipeline of power plant.

The cap covers the end of a pipe. Pipe caps are used at the dead end of the piping system. It is also used in piping headers for future connections.

Pipe Fittings are a Piping component that helps in changing the direction of the flow, such as elbows and tees. Changes the size of the pipe, such as reducers, and reducing tees. Connect different components such as couplings and stop the flows such as Caps.

There are different types of pipe fitting used in piping. Pipe Fittings used in piping work are listed below.

1. Elbow
2. Tee
3. Reducer
4. Union
5. Coupling
6. Adapters
7. Olet (Weldolet, Sockolet, Elbowlet, Thredolet, Nipolet, Letrolet, Swepolet)
8. Cap
9. Nipple
10. Plug
11. Flanges

The nipple is a short pipe stub with a male pipe thread at each end or at one end. It is used for connecting two other fittings. Nipples are used for connecting pipes, hoses, and valves. Pipe nipples are used in low-pressure piping.

Standard : ASME B16.9, ASME B16.11 etc.
Material :20#, A105, 15CrMo, 304, 304L, 316, 316L, etc.
Diameter: DN6-DN100.
Pressure: 3000LB, 6000LB.

The square pipe is a hollow square section light thin-walled steel pipe. It is a section steel with a square cross-section shape and size made of Q235 hot-rolled or cold-rolled strip or coil as the base material, which is formed by cold bending and then welded by high-frequency welding. It has good comprehensive mechanical properties, weldability, cold and hot work ability and corrosion resistance, and has good low temperature toughness. Square pipe and rectangular pipe is equal and unequal length of the steel pipe. Is made of steel after the process of rolling.

Generally the strip is unpacked, flattened, curled, welded to form a round pipe, and then rolled into a square pipe and then cut into the required length.

Product name: Line pipe, Seamless steel pipe API 5L;
Standard: API 5L PSL2;
Grades: B, X42, X52, X56, X60, X65, X70 and S (S for sour service, for example X70QS or NS);
Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless;
Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS;
Length Range: 20 FT (6 meter), 40FT (12 meter)or customized;
Ends Type: Beveled ends, Plain ends;
End Protection: plastic Caps or iron Caps;
Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.

Seamless pipes are derived from solid steel that is in sheet or bar form and is formed into a solid round shape known as â??billetsâ?? which are then heated and cast over a form such as a piercing rod to create a hollow tube or shell. These kinds of pipes are known for their ability to withstand pressure more efficiently in comparison to other methods of pipe manufacturing processes, as well as being fast and cost-effective. Seamless pipes are generally used in gas lines, as well as pipes that carry liquids.

Product name: Line line, Seamless steel pipe API 5L;
Standard: API 5L PSL2;
Grades: B, X42, X52, X56, X60, X65, X70 and S (S for sour service, for example X70QS or NS);
Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless;
Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS;
Length Range: 20 FT (6 meter), 40FT (12 meter)or customized;
Ends Type: Beveled ends, Plain ends;
End Protection: plastic Caps or iron Caps;
Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.

Steel pipe caps are used to close pipes and serve the same purpose as pipe plugs. The form of the blind plate is similar, except that the blind plate is removable and the welded pipe cap is not removable. The design of the pipe cap includes a convex pipe cap, a cone shell, a reducer section, a flat cap and a tightening mouth.

The characteristics of the pipe cap:
1, health, non-toxic: This product is a green building material, can be used for pure drinking water pipeline system.
2, heat resistance: under the specified long-term continuous working pressure, the water temperature of the pipeline can reach 95â??.
3, corrosion resistance, no scaling: can eliminate the pipe scaling blockage and basin, bathtub yellow rust.
4, heat preservation and energy saving: thermal conductivity is only metal.

Elbow refers to the pipe fitting that changes the direction of the pipe in the piping system.
Elbow Angle points, 45, 90, 180 three most commonly used, in addition, according to the needs of the project, but also including 60�° and other abnormal Angle; According to the production process, it can be divided into welding elbow, punching elbow, pushing elbow, casting elbow and so on. Elbow materials include cast iron, stainless steel, alloy steel, malleable iron, carbon steel, non-ferrous metals and plastics, etc.

Types: 15 degree, 30 degree, 45 degree, 90 degree, 145 degree, 180 degree
R=3d, 4d, 5d, 6d, 7d, 8d, 10d, 20d
Standards: asme/ansi b16.9, b16.28, mss sp-43 and so on
Jis b 2311/2312/2313 and so on
Din 2605, 2615, 2616, 2617 and so on
Connect Method: Grooved
Surface Treatment: Epoxy/Painting/Galvanized/Darcomet

Steel pipes have many different uses in manufacturing. Guardrails are one of the most common uses, providing safety features not only for stairs and balconies, but also for cyclists and pedestrians on the street. In addition., steel tubes can also be used as safety bollards to isolate vehicles and protect people, buildings or infrastructure. Third, steel pipe is also a choice for outdoor site decoration. Finally, many commercial bicycle frames are made of bent steel pipes. This has the advantage that steel's high toughness and strength make it resistant to thieves.
Product name: steel pipe, structure steel pipe;
Standard: ASTM, ASME and API;
Grades: API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80and higher. PSL-1/PSL-2. ASTM A106 Gr. B/C. ASTM A53 Gr. B;
Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless;
Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS;
Length Range: 20 FT (6 meter), 40FT (12 meter)or customized;
Ends Type: Beveled ends, Plain ends;
End Protection: plastic Caps or iron Caps;
Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.

Product name: Line pipe, seamless pipe API 5L
Standard: API 5L PSL2
Steel grade: Gr.B, X42, X46, X52, X56, X60, X65, X70 etc.
Size: 1/2-24 inch
Wall thickness: SCH10, SCH20, SCH30, STD, XS, SCH60, SCH80, SCH100, SCH120, SCH160, XXS.
Length: single radom or double radom
Coating: black painting, 3PE coating, FBE coating.

Product name: Line pipe, seamless pipe API 5L
Standard: API 5L PSL2 Steel grade: Gr.B, X42, X46, X52, X56, X60, X65, X70 etc.
Size: 1/2-24 inch
Wall thickness: SCH10, SCH20, SCH30, STD, XS, SCH60, SCH80, SCH100, SCH120, SCH160, XXS.
Length: single radom or double radom
Coating: black painting, 3PE coating, FBE coating.

Galvanized steel pipe mainly used in transmission of coal gas, steam. It was used as water pipe, but after several years past, there were many rust in the pipe, and water get yellow color for carrying iron oxide. The water not only polluted dishes or other sanitary ware, but also carrying bacteria produced in the internal surface which not smooth . As a result of the corrosion, the water contains heavy metal element is too much and is harmful to peopleâ??s health. For this reason, developed countries gradually� banned it using as water pipe since 1960s.


Material Standard: ASTM, ASME and API 5L PSL2;
Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless;
Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS;
Length Range: 20 FT (6 meter), 40FT (12 meter)or customized;
Form: Round, Square, Rectangular Etc
Ends Type: Beveled ends, Plain ends;
End Protection: plastic Caps or iron Caps;
Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.

Welded steel pipe refers to steel belt or steel plate bending deformation into a round, square and other shapes after welding, surface joints of the steel pipe. The welded steel pipe has lower cost and higher production efficiency than the seamless steel pipe, and the blank used is steel plate or strip steel. Welded steel pipe has strong corrosion resistance in acidic environment.


Welded (ERW, LSAW, SSAW) steel line pipe: 1/2�?�¢?? to 60�?�¢??
Range of Thickness: SCH 10 to SCH 160
Ends Type: Beveled ends, Plain ends
Range of length: 20FT, 40FT or customized
Protection Caps in plastic or iron available
Surface appearances: Natural, Varnished, Black painting, 3PE, FBE, etc

Material Standard: ASTM, ASME and API;
High Temperature Carbon Steel Pipe: ASTM A106 Gr. B/C, API 5L Gr. B, ASTM A53 Gr. B;
Low Temperature Carbon Steel Pipe: ASTM A333 Gr. 3/6;
High Yield Carbon Steel Pipe: API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80and higher. PSL-1/PSL-2;
Form: Round, Square, Rectangular Etc;
Outer Diameter: 20MM~508MM;
Wall thickness: SCH 10. SCH 20, SCH 40, SCH STD, SCH 80, SCH XS, to SCH 160;
Length Range: 20 FT (6 meter), 40FT (12 meter)or customized;
Ends Type: Beveled ends, Plain ends;
End Protection: plastic Caps or iron Caps;
Surface Coatings: Natural, Varnished, Black painting, FBE and 3PE, Cladding and Lined etc.


Material Standard: ASTM, ASME and API;
High Temperature Carbon Steel Pipe: ASTM A106 Gr. B/C, API 5L Gr. B, ASTM A53 Gr. B;
Low Temperature Carbon Steel Pipe: ASTM A333 Gr. 3/6;
High Yield Carbon Steel Pipe: API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80and higher. PSL-1/PSL-2;
Form: Round, Square, Rectangular Etc;
Outer Diameter: 20MM~508MM;
Wall thickness: SCH 10. SCH 20, SCH 40, SCH STD, SCH 80, SCH XS, to SCH 160;
Length Range: 20 FT (6 meter), 40FT (12 meter)or customized;
Ends Type: Beveled ends, Plain ends;
End Protection: plastic Caps or iron Caps;
Surface Coatings: Natural, Varnished, Black painting, FBE and 3PE, Cladding and Lined etc.

Stainless Steel (Stainless Steel) is a kind of hollow long cylindrical Steel, his scope of application for conveying fluid pipeline, mainly widely used in petroleum, chemical, medical, food, light industry, machinery instrument and other industrial conveying pipeline and mechanical structure components. Stainless steel pipe IS MADE OF acid and heat resistant bilLET, heated, perforated, sizing, hot rolled and CUT.

Stainless steel pipe is used in any industry where corrosion protection is necessary. While stainless steel pipe is essentially alloy pipe by another name, it is not well suited for extreme service unless itâ??s been appropriately heat treated to increase strength and impact resistance.

Due to its aesthetic appeal, stainless steel is often chosen if pipe must be visible in public or professional settings.

Alloy steels are what they sound like: Steels that include specified amounts of alloying elements. Generally, alloying elements make steels stronger and more resistant to impact or stress. While the most common alloying elements include nickel, chromium, molybdenum, manganese, silicon and copper, many others are used in the production of steel.

High-alloy types of steel are favored in the piping industry for service in extreme conditions, whether it be in hot or cold conditions or subject to rough use. Thatâ??s because the combination of chemistry and proper heat treating can yield strong yet ductile pipe that can take a beating. The oil & gas and power generation industries often favor alloy pipe due to its toughness.

According to the American Iron and Steel Institute (AISI), ferrous material is designated as carbon steel when its core makeup is specified to include no more than 1.65 percent manganese, 0.60 percent silicon and 0.60 percent copper and when no minimum content is specified for other alloying elements.

Carbon steel pipe enjoys wide use across many industries due to its strength and ease of workability. Because it contains relatively few alloying elements and in low concentrations, carbon steel pipe is relatively inexpensive.

Material Standard: ASTM, ASME and API;
High Temperature Carbon Steel Pipe: ASTM A106 Gr. B/C, API 5L Gr. B, ASTM A53 Gr. B;
Low Temperature Carbon Steel Pipe: ASTM A333 Gr. 3/6;
High Yield Carbon Steel Pipe: API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80and higher. PSL-1/PSL-2;
Form: Round, Square, Rectangular Etc;
Outer Diameter: 20MM~508MM;
Wall thickness: SCH 10. SCH 20, SCH 40, SCH STD, SCH 80, SCH XS, to SCH 160;
Length Range: 20 FT (6 meter), 40FT (12 meter)or customized;
Ends Type: Beveled ends, Plain ends;
End Protection: plastic Caps or iron Caps;
Surface Coatings: Natural, Varnished, Black painting, FBE and 3PE, Cladding and Lined etc.

Black steel pipe is uncoated steel, also known as black steel. The dark color comes from iron oxide that forms on its surface during manufacturing. When the steel pipe is forged, a black oxide skin is formed on its surface, giving it the finish seen on this type of pipe.

Material Standard: ASTM, ASME and API;
High Temperature Steel Pipe: ASTM A106 Gr. B/C, API 5L Gr. B, ASTM A53 Gr. B;
Low Temperature Steel Pipe: ASTM A333 Gr. 3/6X;
High Yield Steel Pipe: API 5L Gr. X42/X46/X52/X56/X60/X65/X70/X80and higher. PSL-1/PSL-2;
Form: Round, Square, Rectangular Etc;
Outer Diameter: 20MM~508MM;
Wall thickness: SCH 10. SCH 20, SCH 40, SCH STD, SCH 80, SCH XS, to SCH 160;
Length Range: 20 FT (6 meter), 40FT (12 meter)or customized;
Ends Type: Beveled ends, Plain ends;
End Protection: plastic Caps or iron Caps;

Tee is also known as pipe fitting tee or tee pipe fitting, tee joint, etc. Used mainly to change the direction of the fluid, used in the main pipe to branch pipe. Can be classified by pipe diameter size. General carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon chromium leaching, PVC and other materials production.
Our range is available in various specifications and finds application in chemicals, fats & fertilizers, ship builders, paper, cement and construction industries.

Features:
High tensile strength
Dimensionally accurate
Corrosion resistance
Durability
Fine finish