Find Verified Gyming Rods Suppliers, Manufacturers and Wholesalers

The system is capable of producing bright and long oxygen-free copper rod, copper tube, flat copper bar and other special shaped copper material from cathode copper, and the copper rod diameters are from 8mm to 30mm. Total annual capacity is from 2000 MT to 10000MT.
Technical parameter of final product:
Density: 8.9 g/cm3 Tensile strength: 170N/mm2
Elongation at break: >35% Conductivity of soft wire: í¦100% IACS
Oxygen content: í_10ppm

Various dimensions of stock. Flat bars, rods, hexagon bars, all available.

Width: 10-200 mm
Thickness: 2-80 mm
Rectangle/rounded and tinned optional.
OEM service

Massive stock in the warehouse, welcome your any inquiry.

Material:

Whole Bed is made of Stainless Steel

800*480*800mm

With 3cm High -density stretchy sponge Mattress

With Four3' luxurious silence caste with brake

With Full Length Side rails

With Stainless Steel IV Rod ï¼? with mosquito net

Application:
For the production of copper flat strip, copper busbar, commutator connect, trolley contact wire, and other solid copper conductor. Widely used in the area of transformer, motor, switch, commutator manufacturer and the railway transportation, civil train tracks.
Advantages:
Feed stock can be pure copper or copper alloy
Greatly reduced the feedstock wastage, high utilization
Neither heating nor annealing process, less energy cost
One feedstock size, one process for different sizes of products
No limit on the length of the product, high product efficiency and automation
Optimized equipment design enable a less land consumption and less investment in land and its plant construction
Smooth surface, no peel and no burr defect which can completely meet the requirements of magnetic wire
Conductivity and mechanical properties are improved by hot deformation which promoted its density and crystallization
Constant quality
Both aluminum and copper flat strip production on same machine production
Twin hole die, suit for smallest strip production

We are glad to introduce our Profile Extrusion Line (Extrusion press) to you as an effective system for aluminum (alloy) profile and copper (alloy) profile (window & door profiles, industrial profiles, heat exchange, rod, tube, wire, busbar, strip etc) production.

Our extrusion machine capacity starts from 300MT to 3600MT, for aluminum (alloy) and copper (alloy) production. Extrusion type: Direct extrusion, indirect extrusion, direct and indirect combined extrusion press. Pumps: Germany REXROT, Japan YUKEN, American VICKERS for your choice. With tailored design according to customerí»s specific requirement, we are confident that whatever you want, our production line can exact meet your production requirements.

Tungsten, as a high performance material, has unique properties: highest melting point, low vapor pressure, low coefficient of thermal expansion, Tungsten bars or rods is often used for producing ion implantation parts. Tungsten electrode, electric light source parts and electric vacuum components. In high temperature furnace,tungsten rods or bars is used in producing heating elements and heating parts.

Surface Finish
Black - Surface is "as swaged" or "as drawn"; retaining a coating of processing lubricants and oxides.
Cleaned - Surface is chemically cleaned to remove all lubricants and oxides.
Ground - Surface is centerless ground to remove all coating and to achieve precise diameter control.





Wooden case.

The unique combination of physical and chemical properties has made graphite a most remarkable and attractive material for many modern industries and technologies as follows:
•Nuclear Industry
•Chemical Industry
•Aerospace Industry
•Aluminum Industry
•Electronic Industry
•Foundry Industry
•Metallurgical Industry
•Quartz Industry
•Vacuum Furnace Industry
•Mechanical Industry
•Energy Industry
•Solar Technology
•Semiconductor Technology
•Measuring Technology
•Other Industries and Technologies

Furthermore, certain physical characteristics can be matched to given specifications by varying the raw materials and the manufacturing processes. We can supply a wide range of graphite rods, blocks and cut-off plates below:
>
•Iso-graphite
•Molded graphite
•Extruded graphite
•Vibration Molded graphite
•Further processing graphite, such as Impregnated graphite, Oxidation resistant graphite, etc.



Our standard packing

Molybdenum rod

Niobium rod Introduction:

ShinTek can supply varieties of Refractory metal fabricated products, including Molybdenum (Mo), Tungsten (W), Tantalum (Ta), Niobium (Nb) fabricated products, e.g. ingot, forgings, rods, plates, sheets, foils and assembled products. They are very popular used in a wide of industries, including FPD/Touch sensor, high temperature furnace, medical / nuclear radiation shielding, aviation, specific tools, optical glass, semiconductor, chemical anti-corrosion, superconductor, etc...


Niobium rod specifications:

1. Pure Niobium Products
2. Purity: =99.95%, 99.99%
3. Dimension: Per customer's requirement;
4. Annealed

ShinTek can supply different types of Niobium, including Niobium Foils, Niobium Sheets, Niobium Plates, Niobium Rods / Bars, Niobium tube, Niobium Forgings, Niobium Ingots.

Tungsten Rod Introduction:

ShinTek can supply varieties of Refractory metal fabricated products, including Molybdenum (Mo), Tungsten (W), Tantalum (Ta), Niobium (Nb) fabricated products, e.g. ingot, forgings, rods, plates, sheets, foils and assembled products. They are very popular used in a wide of industries, including FPD/Touch sensor, high temperature furnace, medical / nuclear radiation shielding, aviation, specific tools, optical glass, semiconductor, chemical anti-corrosion, superconductor, etc...

Tungsten specifications:

1. Shape: rod, bar, customized by drawings; can supply semi-finished or finished Tungsten bar.
2. Dimension: Per drawings;
3. Density: 16.85-18.85g/cc per customer requirement;
4. Composition: Pure Tungsten or W-Ni-Fe, W-Ni-Cu, per customer's requirement;
5. Standard Spec: ASTM-B777

Product Basis: Machining according to the given drawings
Product Property: Machining Forgings
Materials: According to customer requirements
Product machining equipment: Machining Specifications: Diameter: 80 2500, length 20m.
Processing Equipment: High-precision CNC lathes, CNC milling machine, CNC boring machine, CNC pipe threader, grinding machines and other supporting processing equipment.
Machining Capacity: Machining main shaft, gear shaft, eccentric shaft, spline shaft, mandrel, pull rod, wind motor shaft and other shafts. Machining capacity: diameter 2.5m, total length 20m.

Seamless pipes are derived from solid steel that is in sheet or bar form and is formed into a solid round shape known as â??billetsâ?? which are then heated and cast over a form such as a piercing rod to create a hollow tube or shell. These kinds of pipes are known for their ability to withstand pressure more efficiently in comparison to other methods of pipe manufacturing processes, as well as being fast and cost-effective. Seamless pipes are generally used in gas lines, as well as pipes that carry liquids.

Product name: Line line, Seamless steel pipe API 5L;
Standard: API 5L PSL2;
Grades: B, X42, X52, X56, X60, X65, X70 and S (S for sour service, for example X70QS or NS);
Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless;
Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS;
Length Range: 20 FT (6 meter), 40FT (12 meter)or customized;
Ends Type: Beveled ends, Plain ends;
End Protection: plastic Caps or iron Caps;
Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.

Anchor rods 5/8"x2.40m - Hot Dip Galvanized.

WHAT IS STEEL WIRE ROD USED FOR
Wire rod is a rolled steel product (alloy or non-alloy) made from semi-finished steel in rectangular, round, hexagonal or square shapes. Fine cross-sections are obtained in particular by continuous cold drawing. The wire rod is wound on a coil and delivered in this form.

Wire rod Uses
Steel wire can be used in a variety of products, depending on its shape and treatment. The main uses are in the manufacture of:

Wire mesh,
Nails
Springs
Reinforcement wire
Barbed wire
Wire rope
Welded wire mesh.

Wire Rod Shapes and Sizes
Steel wire is a finished product that is cold formed before processing. Although shapes vary, most are produced in coils. Diameters are typically between 5 and 15 mm, and most conform to ISO standards, so sizes can easily be increased in increments of 1 mm to 20 mm.

The steering rod is an important component in the steering mechanism of a car. It plays a role in transmitting motion in the steering system, directly affecting the stability of the car's handling, the safety of operation, and the service life of the tires.

Tungsten copper composition 75/25 70/30/80/20 85/15 90/10

Main Specificationï¼?
1. Industrial casting steel machine bed, five side gantry machining center CNC processing.
2. Taiwan SYNTEC high speed and high precision CNC customization system.
3. Italy imported 9.5KW ATC spindle+16 large capacity high speed servo tool magazines.
4. INOVANCE/DETDA high performance frequency conversion system+military quality anti jamming system.
5. Taiwan original automatic lubrication and free-maintenance linear guide rail+three axis original Taiwan precision ball screw transmission
6. Japanese Yaskawa large power servo drive system+French Schneider, Taiwan AirTAC electrical components
7. Phenolic board industry double-layer cavity adsorption structure platform +standard configuration automatic unloading device (not including unloading table)
8. Full automatic feeding and unloading device+drilling/saw/angle head can be added (Optional)

Performance Parameter
Outer Dimension 2200*3300*2350
X Y Working Travel 1220*2440mm
Z Axis Travel >200mm
Working Table Size 1340*2500mm
Max. Running Speed 40m/min
Max. Engraving Speed 30m/min
Repeat Position Accuracy ±0.05mm
Working Voltage AC380V/50Hz
Spindle Power 9.5KW ATC Spindle
Spindle Speed 6000-24000rpm/min
Tool Magazine 16 Servo High Speed Tool Change
CNC Drilling 9 Vertical (Optional)
Work Mode AC Servo
Transmission Mode Precision Screw Rod Transmission

Material: aluminum rod oxidation treatment + plastic plating accessories
Refill: 1.0 or 0.7 ( lanxinhe black )
Weight: 16 grams
Dimensions: 138 * 10 mm
Packing: opp bags, 50 branches / boxes, 1000 branches / boxes, 38 * 31 * 20 cm
Color: many kinds of color you can choose

Woven wire drapery

As a new decorative material.Woven wire drapery are used for interior and exterior decoration of superior buildings.With the light, it gives you a perfect visual effect.



Different patterns with different material, warp rod diameter, rod pich, weft cable diameter, cable pitch and different weight.