CAC(copper-aluminum-copper) tube is used to connect the air conditioner's indoor and outdoor unit. Both end of the CAC tube is copper tube, in the middle is Aluminum tube, copper tube and aluminum tube are welded together by a special welding technic. So the cost of CAC tube is much less than the copper tube. Aluminum tube wall thickness is 1.5 times of copper tube, combine our outstanding welding technic, the service life of CAC tube is more than 20 years, it totally reach our standard requirement.
The system is capable of producing bright and long oxygen-free copper rod, copper tube, flat copper bar and other special shaped copper material from cathode copper, and the copper rod diameters are from 8mm to 30mm. Total annual capacity is from 2000 MT to 10000MT.
Technical parameter of final product:
Density: 8.9 g/cm3 Tensile strength: 170N/mm2
Elongation at break: >35% Conductivity of soft wire: í¦100% IACS
Oxygen content: í_10ppm
Features:
High saturate magnetic induction bs
High initial permeabilityhigh linearity high accuracylow phase and amplitude error for ct
Good temperature stability-55~130
Applying for transformer class grade: 0.5-0.05 class
2applications
High precision current and voltage transformer
Current leakage circuit breakers
Electronic watt hour meter
Precision power meter
Current control in automation industry
Application:
For the production of copper flat strip, copper busbar, commutator connect, trolley contact wire, and other solid copper conductor. Widely used in the area of transformer, motor, switch, commutator manufacturer and the railway transportation, civil train tracks.
Advantages:
Feed stock can be pure copper or copper alloy
Greatly reduced the feedstock wastage, high utilization
Neither heating nor annealing process, less energy cost
One feedstock size, one process for different sizes of products
No limit on the length of the product, high product efficiency and automation
Optimized equipment design enable a less land consumption and less investment in land and its plant construction
Smooth surface, no peel and no burr defect which can completely meet the requirements of magnetic wire
Conductivity and mechanical properties are improved by hot deformation which promoted its density and crystallization
Constant quality
Both aluminum and copper flat strip production on same machine production
Twin hole die, suit for smallest strip production
178 Copper Dross Suppliers
Short on time? Let Copper Dross sellers contact you.
We are glad to introduce our Profile Extrusion Line (Extrusion press) to you as an effective system for aluminum (alloy) profile and copper (alloy) profile (window & door profiles, industrial profiles, heat exchange, rod, tube, wire, busbar, strip etc) production.
Our extrusion machine capacity starts from 300MT to 3600MT, for aluminum (alloy) and copper (alloy) production. Extrusion type: Direct extrusion, indirect extrusion, direct and indirect combined extrusion press. Pumps: Germany REXROT, Japan YUKEN, American VICKERS for your choice. With tailored design according to customerí»s specific requirement, we are confident that whatever you want, our production line can exact meet your production requirements.
Tee is also known as pipe fitting tee or tee pipe fitting, tee joint, etc. Used mainly to change the direction of the fluid, used in the main pipe to branch pipe. Can be classified by pipe diameter size. General carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon chromium leaching, PVC and other materials production.
Our range is available in various specifications and finds application in chemicals, fats & fertilizers, ship builders, paper, cement and construction industries.
Features:
High tensile strength
Dimensionally accurate
Corrosion resistance
Durability
Fine finish
* Dimension: 600 (width) *600 (depth) * 800(height) mm
* Thickness: columns-1.8/others-0.8mm
* IP20
* Fans on the top
* 2*trays
* Removable side panels with latches
* Mesh or toughened glass for the front and back doors with locks
* Color:black-RAL9004
*Material: Cold Rolled Steel 1.0mm thickness
*Surface finish: Powder Painting
*Blinds optional on the sides
*Lock on the front door
*Various dimensions
*OEM available
Alloy steels are what they sound like: Steels that include specified amounts of alloying elements. Generally, alloying elements make steels stronger and more resistant to impact or stress. While the most common alloying elements include nickel, chromium, molybdenum, manganese, silicon and copper, many others are used in the production of steel.
High-alloy types of steel are favored in the piping industry for service in extreme conditions, whether it be in hot or cold conditions or subject to rough use. Thatâ??s because the combination of chemistry and proper heat treating can yield strong yet ductile pipe that can take a beating. The oil & gas and power generation industries often favor alloy pipe due to its toughness.
Product Description
We can offer different thickness and width copper foil/ sheet for you. It is ED copper foil, which is the best shielding material for MRI RF room. In usual, 3oz thickness 1320mm width ED shielding copper foil/ sheet is our hot-sale product.
Copper is durable, has superior electrical conductivity and is extremely corrosion resistant. Copper is also easily formed meaning that the shapes of the shield can be easily modified to suit rooms of different shapes and sizes.
Specification
This is our hot-selling specification,if you need other specification,please contact me for more information,we can provide customized services.
Copper Foil Thickness Width
ED Copper Foil 2oz(0.07m) 1290-1370mm
3oz (0.105mm)
4oz (0.140mm)
5oz (0.175mm)
6oz (0.210mm) 1370mm
RA Copper Foil 0.1mm Width Max 600mm
0.15-0.5mm Width Max 800mm
0.5-3mm Width Max 1000mm
Over 3mm Width Max 1200mm
Characteristic
1. High performance, vertically-supported modular enclosure
2. Reinforced wall design
3. Lightweight
4. Installed in more MRI sites worldwide than any other shield system
5. Easily and quickly modified on site
6.
Product Description
We can offer different thickness and width copper foil/ sheet for you. It is ED copper foil, which is the best shielding material for MRI RF room. In usual, 3oz thickness 1320mm width ED shielding copper foil/ sheet is our hot-sale product.
Copper is durable, has superior electrical conductivity and is extremely corrosion resistant. Copper is also easily formed meaning that the shapes of the shield can be easily modified to suit rooms of different shapes and sizes.
Specification
This is our hot-selling specification,if you need other specification,please contact me for more information,we can provide customized services.
Copper Foil Thickness Width
ED Copper Foil 2oz(0.07m) 1290-1370mm
3oz (0.105mm)
4oz (0.140mm)
5oz (0.175mm)
6oz (0.210mm) 1370mm
RA Copper Foil 0.1mm Width Max 600mm
0.15-0.5mm Width Max 800mm
0.5-3mm Width Max 1000mm
Over 3mm Width Max 1200mm
Characteristic
1. High performance, vertically-supported modular enclosure
2. Reinforced wall design
3. Lightweight
4. Installed in more MRI sites worldwide than any other shield system
5. Easily and quickly modified on site
6.
Product Description
We can offer different thickness and width copper foil/ sheet for you. It is ED copper foil, which is the best shielding material for MRI RF room. In usual, 3oz thickness 1320mm width ED shielding copper foil/ sheet is our hot-sale product.
Copper is durable, has superior electrical conductivity and is extremely corrosion resistant. Copper is also easily formed meaning that the shapes of the shield can be easily modified to suit rooms of different shapes and sizes.
Specification
This is our hot-selling specification,if you need other specification,please contact me for more information,we can provide customized services.
Copper Foil Thickness Width
ED Copper Foil 2oz(0.07m) 1290-1370mm
3oz (0.105mm)
4oz (0.140mm)
5oz (0.175mm)
6oz (0.210mm) 1370mm
RA Copper Foil 0.1mm Width Max 600mm
0.15-0.5mm Width Max 800mm
0.5-3mm Width Max 1000mm
Over 3mm Width Max 1200mm
Characteristic
1. High performance, vertically-supported modular enclosure
2. Reinforced wall design
3. Lightweight
4. Installed in more MRI sites worldwide than any other shield system
5. Easily and quickly modified on site
6.
Product Description
We can offer different thickness and width copper foil/ sheet for you. It is ED copper foil, which is the best shielding material for MRI RF room. In usual, 3oz thickness 1320mm width ED shielding copper foil/ sheet is our hot-sale product.
Copper is durable, has superior electrical conductivity and is extremely corrosion resistant. Copper is also easily formed meaning that the shapes of the shield can be easily modified to suit rooms of different shapes and sizes.
Specification
This is our hot-selling specification,if you need other specification,please contact me for more information,we can provide customized services.
Copper Foil Thickness Width
ED Copper Foil 2oz(0.07m) 1290-1370mm
3oz (0.105mm)
4oz (0.140mm)
5oz (0.175mm)
6oz (0.210mm) 1370mm
RA Copper Foil 0.1mm Width Max 600mm
0.15-0.5mm Width Max 800mm
0.5-3mm Width Max 1000mm
Over 3mm Width Max 1200mm
Characteristic
1. High performance, vertically-supported modular enclosure
2. Reinforced wall design
3. Lightweight
4. Installed in more MRI sites worldwide than any other shield system
5. Easily and quickly modified on site
6.
Product Description
We can offer different thickness and width copper foil/ sheet for you. It is ED copper foil, which is the best shielding material for MRI RF room. In usual, 3oz thickness 1320mm width ED shielding copper foil/ sheet is our hot-sale product.
Copper is durable, has superior electrical conductivity and is extremely corrosion resistant. Copper is also easily formed meaning that the shapes of the shield can be easily modified to suit rooms of different shapes and sizes.
Specification
This is our hot-selling specification,if you need other specification,please contact me for more information,we can provide customized services.
Copper Foil Thickness Width
ED Copper Foil 2oz(0.07m) 1290-1370mm
3oz (0.105mm)
4oz (0.140mm)
5oz (0.175mm)
6oz (0.210mm) 1370mm
RA Copper Foil 0.1mm Width Max 600mm
0.15-0.5mm Width Max 800mm
0.5-3mm Width Max 1000mm
Over 3mm Width Max 1200mm
Characteristic
1. High performance, vertically-supported modular enclosure
2. Reinforced wall design
3. Lightweight
4. Installed in more MRI sites worldwide than any other shield system
5. Easily and quickly modified on site
6.
178 Copper Dross Suppliers
Short on time? Let Copper Dross sellers contact you.
