Find Verified Agriculture Harvesters Suppliers, Manufacturers and Wholesalers

SUNSHINE S-918K LCD Vacuum Separator Machine Wide Voltage Mobile Phone/Pad LCD Screen Repair Separator Display Glass Removing 8.5 Inch Broken Screen Separating Tool.

Features:
1. 14 -inch large work area, to meet the needs of mobile phones and pad.
2. Built-in two powerful vacuum pump.
3. Double control suction control, partition suction, more accurate.
4. 8.5 Inches Large Working Space Compatible with a variety of mobile phone LCD screen removal.
5. Super Suction air pump, low noise and vibration, more powerful suction.
6. Visual Temperature Control Panel CNC precision temperature adjustment, temperature preset, easy to remove the screen.

Specification:
Product name: Vacuum Separator
Model: S-918K
Product size: 283*170*120mm
Package size: 312*210*165mm
Working size: 110*190mm/8.5 Inches
Net weight: about 1.81kg
Cross weight: about 2.3kg
Power supply: AC 110-220V
Power: 100W
Applicable: Most Mobile Phone Screens
Configuration: Host, Power Cord, Separation Pad, Manual

SUNSHINE DT-20N multimeter with smart touch screen, 10A AC DC voltage and current resistance measuremen, Sunshine fully automatic high precision DT-20N multimeter with ohm volt amp and diode voltage tester meter, dual fused for anti-burn.

SUNSHINE DT-20N Smart Touch Digital Multimeter AC DC Test Meter

Product Features :
Full touch screen control, opening multimeter touch era
Mini body, take with you where you go.
Easy operation, easy to learn and understand
Configure special tip test pen, can test precision components
We are professional repair tool supplier, all our items are high quality, we will inspect again before packing.
Precision touch three display on one screen : Touch sensitive and stable, fast measurement, easy to use high-definition 3.2inch large screen three-display + backlight.
Easy Carry : Ultra-thin design is small and light, more convenient to carry, humanized design, comfortable grip, easy to put in pants pocket.
Intelligent integration burn-proof design : Three high-speed chips in this machine make the measurement more accurate.

Product Description :
LED flashing lifgting : Flashing function, touch to open.
Integrated test lead line : The test lead line and the meter are integrated to prevent the test lead from being lost and effectively prevented from being inserted into the wrong test lead hole.
Battery compartment : Easy battery replacement, environmental protection and durability, 2pcs 1.5V AAA Battery.
Non-contact electric field measurement : Check the electric field signal strength. The stronger the model, the fuller the "----" sign of the signal. If there is no signal, the display will shoe "EF".
Analog bar display : Dual analog bar on the same screen.
Resistance measurement : Maximum 60M�© range, fast measurement.
Capacitance Test : Automatic identification of capacitance, fast measurement.
AC Voltage / Frequency : The same screen display, large screen intuitive.
Line continuity test : When the resistance of the tested line is ï¼?50�©ï¼? the default is continuity test.
Firewire Discrimination : Single touch test / firewire recognition. If it is firewire, the screen will display "OL" buzzer will sound an alarm.
True effective value : Most current waveforms are not sine waves. The power supply is distorted in different situations. Therefore, it is very important to measure the AC current and voltage accurately.
Real-time temperature : After booting, the amboent temperature is automatically displayed, and the measured ambient temperature is displayed in real time.

Product Specification :
Brand: Sunshine
Product Name: Toush Multimeter
Model: DT-20N
Net Weight: 147g (without battery)
Gross Weight: Approx. 380g
Product Size: 135*68*17mm
Package Size: 185*130*35mm
Battery: 2pcs * AAA battery

Packing List :
1 * DT-20N Multimeter
1 * Test Leads
1 * Black Bag
1 * User Manual

MaAnt Mini Intelligent Current Recording Analyzer For maintenance personnel mobile phone repair.

Feature:
The first intelligent current analyzer for maintenance personnel
The current recording analyzer is small practical accurate and efficient intelligent
Flagship configuration
Bluetooth 5.0 wireless transmission/WIFI2.4G wireless transmission/USB fast transmission/current analysis/range one button switching/output one button switching/current recording current online/multiple inputs/convenient maintenance
400mA/2A key switching
One machine for multiple purposes, one machine for two! Pointer meter 2A/400mA - key switching can meet your work needs, including the overall details
Show rich
Design of current flow lamp
MA/A water light indicator design, clear and more comfortable reading, IPS high-definition LCD screen, rich display, more delicate display content, 0.1mA resolution, 10 screen refreshes in 1 second, far more than other three screen refreshes in 1 second, 35 golden viewing angle, convenient observation
Can be used with mobile power

This welding tool is microcomputer intelligence soldering iron, also is lead-free soldering iron, transparent handle, stainless steel housing, high-quality ceramic heating element. Protection during welding board and improve the reliability of the circuit elements, it has particularly excellent

Intelligent automatic temperature controller and other components, the button on the handle directly thermostat, LCD temperature display with speed heating, precise temperature control, no leakage in the form of design, in addition to static,feel light, nice advantages. Protection during welding board and improve the reliability of the circuit elements, it has particularly excellent

Features:
Particularly stable welding temperature, the power of the heating element power;
Fast heating of the heating function, strong regenerator temperature compensation;
Lead-free long-life tip configuration, safe and reliable grounding device;
Eco-friendly ways of working, power consumption 50% lower than the average iron.

UMT Dongle - Unlimited Phone Flashing, Mobile Unlocking and Code Calculation Tool

UMT Dongle Box Features :

Flashing
Sim Lock Remove
Repair BT
IMEI Repair (Please follow your country rules before using this option)
Wipe Phones
Remove Google Account
Smart Card Protected
Supports Windows XP, Win Vista, Win 7, Win 8.0, Win 8.1, Win 10

Samsung Android (Qualcomm) Features :

Read Info via Diag / UART / ADB
One Click Backup / Wipe / Restore Partitions (All Models)
Repair IMEI and MEID via UART and Diag Port
One Click Samsung Sprint Unlock and Relock
Write Certificate
Reset SPC
Write PRL

Other Features :

NV Read / Write
Remove ESN, MEID, SPC and IMEI From Full Firmware
Qualcomm Firmware Editor
One Click FTM Fix For Phones Stuck in FTM Mode
Read / Write RUIM Configuration
Auto Detect CPU Type and Flash and EFS Size
Read Firmware in Normal and Download Mode
ESN To MEID Bruteforce to Find Matching MEIDs for a given ESN
Full Diagnostic Terminal to send any Diag Command to Phone

Advance Features :

Automatic Detection of Firmware Type
Automatic Flash Chip Detection to Protect from Flashing Wrong Size Firmware
Manual Mode Unlocking For ZTE Phones to Unlock Even Unsupported Phones
Automatic Detection of Phone Model for LG and ZTE
Automatic User Code Read while reading Information
ZTE Recovery Module to Recover most ZTE Phones in Blinking Condition

5ton Hydraulic Power Unit Single Drum Winch for Sale :

Application: Marine,Ocean,offshore ,harbor,etc.


Description:

Drive:Electric/Hydraulic /Manual Driven
Configuration:Single/Double Drums
Drum Rope:P.P Rope or SWR
Rated Pull:1 Tones  To 350 Tones (1st Layer)
Brake Holding:Up To 450 Tonnes  ( Static, 1st Layer)
Wire Speed:Complying to ISO/Classification Society rules
Clutch:Manual /Hydraulic Operated Jaw Clutch
Brake:manual/Hydraulic Released Band Brake
Control:Local Control Console and/or remote Control Panel
spooling device is optional

High efficiency CNC double-head Wire Rebar bending machine.

The CNC Double-heard rebar bender center adopts digital control. Its features simple operation, convenient maintenance and high efficiency. It can realize automatic length measurement, automatic bending clamp, rapid prototyping and other functions. The control program of imported PLC and CNC stores hundreds of figures and is equipped with database. It applies advanced designing concept and adopts imported servo motor driving and controlling. Therefore, it realizes two-way digital control bending and accomplishes more than 20 angles figures. The producing efficiency is high. This equipment especially applies to highway bridge construction site and rebar concentrated processing factory, etc.

1.Controlled by top-class brand servo motor. The head features rapid moving response and high accuracy of positioning.

2. With world top-class brand CNC control system, we realize automatic production and ensure practicality and long service life of equipment.

3. The bending head has compact structure. The bending moulds of different models are equipped. The bent rebar is of intensive range.

4.The bending platform adopts high-strength guide rail which will not be out of shape easily and is durable in use.

5. With humanized storing racks, the production is easy, and efficiency can be improved.

6. It can process many rebars at one time to increases efficiency.

7. It adopts unitary lifting and there is no need to dismantling when removal. It applies to fixed site manufacturing or frequently changing site for its simple installation.

8. High intensity and automatic storage rack on vertical rebar bending center.

Technical Data
Model FHB2-32A
Overall size 12000*2155*1690(L*W*H)
Working Voltage 380V
Installed Power 15.5KW(working power 5KW),50-60Hz
Bender moving speed 0.1-0.5m/s
Bending Speed 30°-48°/S(5-8r/min)
Overall Weight 4.5tons
Min Length scope of the stirrup side 70mm
Max bending angle "Upward bending 0-200°
Downward bending 0-120°"
Bi-directional bending (up or down bend) Φ10mm-Φ28mm
Unidirectional bending (upward bending) Φ28mm-Φ32mm
Min. Space between stirrup side ¢10 560mm ¢32 620mm
Max bending length 10.5m
Feeding speed of storage convey table 0.6m/s
Load capacity of storage convey table 3T
Working Temperature -10â??â??+50â??

Rovan Baja 5B 450 45cc petrol car CNC metal Baja 2WD, 45CC Baja5B highlights its power combination, the body structure also uses a super configuration combination, in general, 45CCBaja is a combination of strength and physique players!Scale  1:51,Displacement 45cc four bolt engine(with NGK and walbro carb.1107),single cylinder,two stroke,air-cooled2,LxWxH:817x480x255mm3,Tread:395mm(F)/400mm®4,Wheelbase(F/R):570mm5,Rear wheel drive6,Rear shaft Brake7,20KG full metal gear throttle servo with CNC servo arm8,65KG metal gear steering servo with CNC servo arm9double exhaust pipe with muffler( including metal rear bumper)10, Metal diff. gear set11,full terrain  tyres set with nylon beadlocks12,CNC 8mm metal absorber137.4V-5C 4200amh battery14,RC4G 2.4G 4 channel controller with LCD screen15,8000RMP new clutch kit16,Front & rear lean prevention set 17new strengthen 9mm half shaft18,Alu.metal clutch tripod19metal roll cage20,New symmetric steering kit with CNC alloy drag link21,Attached with service kit bag22,New ratio can23,New incorporated Hex.clutch bell kits24,CNC alloy front & rear  suspension arm set25,CNC front absorber supporting tower(also fit for 5T or 5SC truck)26,CNC alloy F&R thicker board27,CNC alloy rear absorber brace rod28,CNC alloy rear shock support and bar set29,CNC alloy ball connector30,CNC alloy rear wheel bearing carrier31,Rear LED light with CNC alloy rear foundation32,Front LED light33,new anti-leaking fuel tank34,Metal sealed wheet nutsDetails: All-terrain tires with closed tire nuts!CNC metal full suspension assemblyThe metal front set includes the front shock absorber and the thickened metal second floor is finished by CNC!Using a symmetrical steering systemSymmetrical steering uses a 65KG digital metal gear steering gearUse the leak-proof tank, even if you roll over, it will not leak oil, and it will not cause the tank to be sealed and vacuumed by the engine!The core of the whole car, the source of power, 45CC gasoline engine! url:http://www.rovan-rc.com

Floor Roller Coating Machine1300mm Full Precision Converse and Positive Roller Coater Configuration&Parameter Floor Roller Coating Machine Technical ParameterTechnical Parameter.ModelJXRA ?¢-1300modelJXRA ?¢-1300Working width(mm1300Working thickness(mm2~80Feeding speed(m/min5~15Min. transport length(mm300Coating roll size(mm1450 240Quantitative roll size(mm1450 150Quantitative roll power(kw0.75Coating roll power(kw1.5transmission power(kwPearl NMRW075-30 series 1.5Transmission motor(kw)Delta converter VFD015M43B(1rubber roll power(kwPearl NMRW075-60 series 1.5Rubber motor(kw)Delta converter VFD015M43B(2Electro-optical roller power (kwPearl NMRW050-40 series 0.75Electro-optical roller motor(kw)Delta converter VFD007M43B(2Total power(kw12Machine size(mm1800 2360 1580Note:Total double heating barrel power (kw):18Lift the feed through the worm double dovetail slot synchronization adjustmentInfeed end equipped with infrared sensor (optional) to prevent accidental injury or too thick plate plateHigh-strength tool steel blade, with a separate NMRW030-50 series reducer, to ensure the accuracy of the blade angle adjustment Floor Roller Coating Machine ConfigurationMachine Configuration1.using imported materials rubber roller rubber roller diameter of 240mm, the roll surface by CNC precision machining.2.rolls with a diameter of 150mm light big roll, chrome roll surface, cylindrical grinder by CNC precision machining.3.the conveyor belt is 3mm slip, solvent resistance, to prevent the phenomenon from the floor, plus anti-deviation device.4.running light roller and rubber roller by an independent drive and control gear, wherein the spacing between the adjustment screw through a worm machine, driven dovetail mechanism to complete.5.the entire machine configuration Taiwan Delta converter and three-phase asynchronous motor worm gear.6.the whole package, one diaphragm pump, one 20L -heating oil tank.Customers need to take care of themselves with others:1.50Hz, 380V three-phase power supply.2.0.5MPA gas source. Floor Roller Coating Machine Detail Image Application Our Servise
-

Calcium Silicate Roller Coating Machine600mm Putty machine configuration& parameter Calcium Silicate Roller Coating Machine Technical ParametermodelJXFT 1-600modelJXFT 1-600Effective processing width (mm)600Effective processing speed(mm2~80Minimum processing length(mm)300Transmission speed(m/min5~15Coating roll size(mm)750 240Quantitative roller size(mm750 150Putty roll size(mm750 240machine size(mm1400Ã?1660Ã?1650Putty roller power(kw0.75Pearl NMRV075-80 seriesDelta converter VFD007M43BTransmission power(kw0.75Pearl NMRV075-30 seriesDelta converter VFD007M43BCoating roll power(kw0.75Pearl NMRV075-60 seriesDelta converter VFD007M43BQuantitative roller power(kw0.37Pearl NMRV050-40 seriesDelta converter VFD004M21ATotal power(kw2.62Plus heating barrel total power(kw)8.62Lift the feed through the worm double   dovetail slot synchronization adjustmentInfeed end equipped with infrared sensor   (optional) to prevent accidental injury or hand too thick plateHigh-strength tool steel blade, with a   separate NMRW030-50 series reducer, to ensure the accuracy of the blade angle   adjustment Calcium Silicate Roller Coating Machine ConfigurationMachine configuration1.Putty roll with a diameter of 240mm light big roll, chrome roll surface, cylindrical grinder by CNC precision machining.2.equipped with imported materials scraper strong toughness, by the reducer adjustment, high accuracy.3.the conveyor belt is 3mm slip, solvent resistance, to prevent the phenomenon from the floor, plus anti-deviation device.4.the bearing sealing structure to prevent the penetration of paint.5.the whole package, a diaphragm pump, a heating oil tank 20L.Customers need to take care of themselves with others:1.50Hz, 380V three-phase power supply.2.0.5MPA gas source. Calcium Silicate Roller Coating Machine Detail Image Application Our Servise



-

Automatic UV Coating MachineAutomatic UV Coating Machine Technical ParameterMachine parametermodelJXRA ?¡-1300ModelJXRA ?¡-1300Working width(mmeffevvvvvvvvvvvvv  1300Working thickness(mm2~80Feeding peed(m/min5~15Mini. transport length(mm300Coating roll size(mm1450 240Quantitative roll size(mm1450 150Coating roll power (kw)1.5Quantitative roll power (kw)0.75Transmission power(kw1.5PearlNMRW075-30 seriesDelta converter   VFD015M43B(1Rubber roll power(kw1.5PearlNMRW075-60 seriesDelta converter   VFD015M43B(2Electro-optical roller power(kw0.75PearlNMRW050-40 seriesDelta converter   VFD007M43B(2Total power(kw12Machine size(mm180023601580Note: Total double barrel heating power (kw):18High-strength tool steel blade, with a separate NMRW030-50 series reducer, to ensure the accuracy of the blade angle adjustment Automatic UV Coating Machine ConfigurationMachine Configuration1. using imported materials rubber roller rubber roller diameter of 240mm, the roll surface by CNC precision machining.2. rolls with a diameter of 150mm light big roll, chrome roll surface, cylindrical grinder by CNC precision machining.3. equipped with imported materials scraper strong toughness, by the reducer adjustment, high accuracy.4. the conveyor belt is 3mm slip, solvent resistance, to prevent the phenomenon from the floor, plus anti-deviation device.6. the bearing sealing structure to prevent the penetration of paint.7. the entire machine configuration Taiwan Delta converter and three-phase asynchronous motor worm gear.Customers need to take care of themselves with others:1.50Hz, 380V three-phase power supply.2.0.5MPA gas source. Automatic UV Coating Machine Detail Image Application Our ServiseAlso 1.Engineers available to service machinery overseas.2.Free proofing.



-

Floor UV Coating Machine1300mm Full Precision Converse and Positive Roller CoaterFloor UV Coating Machine Technical ParametermodelJXFT-1300modelJXFT-1300Effective processing width (mm)1300Woking speed(mm2~80Min. processing length(mm)300Transmission speed(m/min5~15Coating roll size(mm)1450 240Quantitative roller size(mm1450 150Putty roll size(mm1450 240machine size(mm2100Ã?2260Ã?1580Putty roller power(kw1.5Pearl NMRV075-80 seriesDelta converter VFD015M43BTransmission power(kw1.5Pearl NMRV075-50 seriesDelta converter VFD015M43BCoating roll power(kw1.5Pearl NMRV075-60 seriesDelta converter VFD015M43BQuantitative roller power(kw0.75Pearl NMRV050-40 seriesDelta converter VFD007M43BTotal power(kw13.5 Floor UV Coating Machine ConfigurationMachine Configuration1. using imported materials rubber roller rubber roller diameter of 240mm, the roll surface by CNC precision machining.2. Putty roll with a diameter of 240mm light big roll, chrome roll surface, cylindrical grinder by CNC precision machining.3. the conveyor belt is imported materials 3mm, solvent, from the floor to prevent the phenomenon, plus anti-deviation device.4. running light roller and rubber roller by an independent drive and control gear, wherein the spacing between the adjustment screw through a worm machine, driven dovetail mechanism to complete.5. by two rubber rollers and a putty roll composition greatly increases the amount of padding.6. the entire machine configuration Taiwan Delta converter and three-phase asynchronous motor worm gear. Customers need to take care of themselves with others:1. 50Hz, 380V three-phase power supply. Floor UV Coating Machine Detail ImageApplicationOur Servise


-

Pelton Turbine
Pelton turbine is suitable for medium and high water head power plants. The key components are: Pelton runner, main shaft and Nozzle assembly.
Application Scope: Alcance de aplicación:
Water Head: 100 ~ 1700m
Output: 0.1 ~ 300MW
Frequency: Frecuencia: 50/60HZ
Runner Diameter: 0.5 ~ 3m
1.Advanced CFD, FEA technic is utilized in the designing process to ensure better technical solution.
Getai Hydropower is one of the leading Pelton Turbine manufacturers. Our Pelton Turbine Generator, Pelton Turbine Efficiency, Pelton Runner has high quality and competitive price, and you can see the Application Of Pelton Turbine.
CFD analysis for Pelton turbine is performed in order to predict the turbine performance. The head loss in the collecting pipe and injector assembly is calculated based on CFD analysis results.
The relation of needle stroke and flow also can be calculated. CFD analysis can improve injector and nozzle design to reduce head los. The flow curve relative to needle stroke can be drawn based on analytical data.
CFD analysis can simulate the whole procedure which flow coming into and outgoing from bucket. The flow visualization can clearly show whether water flow outgoing from bucket pressure side hit the bucket back side. Such flow situation will cause more hydraulic loss and should be avoid during runner bucket optimum design process. The torque generated by runner and pressure distribution in the bucket can be calculated based on CFD analysis results. Turbine output and efficiency is finally predicted for various operating points.
Fig.8 Flow inside bucket
Shenyang Getai Hydropower Equipment Co.,Ltd main products: Pelton Turbine, Francis Turbine, Kaplan Turbine, Tubular Turbine, Pelton Turbine Generator, Francis Turbine Generator, Double Francis Turbine, Pelton Turbine Formula, welcome to our factory!
The possible location of cavitation can be predicted based on the pressure distribution in the bucket. The phenomena of cavitation should be avoided in the back tip of splitter by optimum design for back shape of splitter.
3. All raw material strictly conform to international standard, key component such as runners, guide vane is Forged and entire CNC machined.
Chemical Composition for ASTM A473 S41500 and ASTM A743 CA6NM%
Material No. C Si Mn P S Cr Ni Mo
ASTM A473 S41500 0.05 0.60 0.5-1.0 0.030 0.030 11.5-14.0 3.5-5.5 0.40-0.80
ASTM A743 CA6NM 0.06 Max1.0 Max1.0 0.040 0.030 11.5-14.0 3.5-4.5 0.40-1.0

Mechanical Property for ASTM A473 S41500 and ASTM A743 CA6NM
Material No. 0.2(Mpa) b(Mpa) δ5(%) (%) Akv (J/cm2) HB
ASTM A473 S41500 620 795 15 45 50 295
ASTM A743 CA6NM 550 755 15 35 50 285

4. State of the art machining and testing equipment, as well as licensed professional engineers all combined to help guarantee better product precisioness.

5. All product is subject to strict inspection according to international standards and client special requirements.

Description
E Rod Push Elevator


Description


It is a lifting system developed and mounted by my company(Anruier machinery) It is driven by an electric motor to push the antenna up and down through the chain. The elevator is mainly composed of driving combination, high-precision track combination, lifting platform, fixed platform combination, control system and manual device. It has high performance to price ratio and extensibility.


The characteristics are as follows


1. Safety and self -locked: it has absolute self-locking function using trapezoidal screw drive, operation will be much more safety.

2. Automated-manual in one: it can keep a 15 minutes normal use with power failure by a manual equipment.

3. Synchronization: the single deceleration motor drives multiple push rods by mechanical coupling to achieve synchronous lifting.

4. Driving system: motor

5. Speed adjustable: variable speed motor and frequency converter can be configured to make the lifting speed adjustable.

6. Anti-misoperation : the upper and lower connection joints are equipped with anti-misoperation devices, which can prevent the unnecessary damage to the equipments lead by the forgotten locking nuts.

7. Status memory: status memory function will be available according to the requirements of customers.

8. Protection grade is high: the electric push rod is equipped with double seals to protect cylinder against dust and grease and the protection grade can reach IP55, IP56, it can work for a long time in the complex and bad environment ,maintenance-free .

9. Others: mechanism is ingenious and smart designed, the parts can be freely disassembled, the installation and maintenance are very convenient, the environmental adaptability meets the requirements of military industry standard, and the parts are universality and standardization. The accessories are rich in selection and can meet different needs.

ESecond, the machine main components
The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control.
Agencies main configuration and specifications
(A) unwinding institutions
The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled.
Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum.

Unwinding specifications: maximum width of700mm, phi diameter 1000mm
Paper tube clamping method: air shaft clamping
  Specifications: 3in 1 root of the air shaft 1 piece
         A pneumatic gun 1 piece
Tension control: closed-loop tension control.
      The output control: 200N.M 1 piece
magnetic brakes 1 piece
Correction perform: tracking the substrate by the photoelectric eye correction controller for a given signal, the motor drive ball screw execution.
  Specifications: photoelectric eye 1 piece
         Two linear bearings4 piece
         A corrective institutions 1 piece
         The photoelectric eye fine-tuning 1 sets

ESecond, the machine main components
The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control.
Agencies main configuration and specifications
(A) unwinding institutions
The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled.
Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum.

ESecond, the machine main components
The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control.
Agencies main configuration and specifications
(A) unwinding institutions
The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled.
Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum.

This Ainuo AN9640B(F)/AN9651B(F)/AN9651F(F) series comprehensive electrical safety compliance analyzer is a typical safety analyzer in the industry, and has been sold well at home and abroad for nearly 30 years. This product keeps pace with the times in terms of functions and performance, and is continuously improved to meet the requirements of change of electrical product safety standards and changes of safety compliance testing requirements of production lines.

This series of products can meet the safety standard testing requirements of various electrical products such as household appliances, energy-saving lamps, information equipment, audio and video equipment and laboratory equipment.

Features:

Regulations: comply with safety standards in various industries and meet the testing requirements of new standards.

Multi-function: integrating comprehensive testing of safety performance and electrical performance such as AC withstand voltage, insulation resistance, grounding resistance, leakage current, power parameters, starting performance, etc., one station, one-key start, and complete full-function testing quickly.

Perfect configuration: 500VA AC withstand voltage (AC 5kV/100mA), 200mA or higher short-circuit current, optional thermal withstand voltage, up to 32A grounding resistance test current, and 12V or lower open circuit voltage; leakage current testing under operating/non-operating temperature, standard GB/T12113 Figure 4 Human Body Simulation Network (MD).

This AN9651TH(F) series comprehensive electrical safety compliance analyzer has eight-in-one testing (grounding resistance/insulation resistance/AC withstand voltage/DC withstand voltage/leakage current/power parameters/start-up/waiting), compatible three/single-phase loads, suitable for safety testing of line, labs, quality inspection department of electrical appliances such as central air conditioning, commercial heaters, commercial kitchen utensils and others.

Features:

Multi industrial standards: comply with CCC, IEC, EN, VDE, BS, UL, JIS and other mandatory electrical safety standards. 200mA or higher short-circuit output current for 500VA withstand voltage (ACCV/100mA). Built-in replaceable MD card for leakage contact current test network, suitable for various industrial standards for different MD.

Complete functions: AC withstand voltage, DC withstand voltage, insulation resistance, grounding resistance, leakage current, operating power, low-voltage start and waiting.

Multi power supply: built-in isolated power unit, automatically control of power supply of the product under test; external variable frequency power supply for testing online. Optional three-phase isolation transformers or variable frequency power supply and U.S. standard power supply of various specifications (20kVA%kVA0kVA90kVA).

Intelligent test: 15 groups of memory of test conditions, 8-step programming for each group; one-key start to complete all tests.

Automatic control: interfaces for RS232/RS485/LAN (optional), barcode scanner, variable frequency power supply control, digital control, easy to configure automatic test systems.

Information management: optional PC and ESRS software for barcode recognition, data management, MES connection.

Simple operation: 10. TFT color screen, menu operation, Chinese/English dispaly, socket-type test tooling.

JHD series yeast rotary dryer is one kind of single shell dryer that can be used in the drying process of a variety of slurries, especially suitable for the recycling of brewers yeast. We have yeast dryer products of different configurations to meet the demand of the annual output from fifty thousand tons to three hundred thousand tons. This machine is suitable for the drying process of food, chemical, pharmaceutical, and other industries.

Principle
Our brewers' yeast dryer product takes advantage of heat conduction between hot steam and wet materials, realizing the indirect drying process. The drum is a hollow metal cylinder whose surface is deeply processed to be clean and polished. The drum rotates to the axial underdrive devices (gear drive) at an adjustable rate. The slurry is preheated to 0 in the preheating tank and then delivered to feeding chute through the pump.