Fiberglass mesh is designed to reinforce concrete structures instead of conventional metal reinforcement.
It has the following advantages in relation to metal:
9 times lighter
3 times stronger
corrosion resistant
significantly accelerates the reinforcement process (knitting on the object is not necessary)
no need to put chairs
low thermal conductivity
Composite bars are connected to the network using a unique patented technology, which uses high performance automatic equipment. The joint is also a stool that forms a protective layer of concrete. For different rod diameters, the height of the stool is different.
The only restriction on the use of fiberglass mesh is the inability to operate at temperatures above 150 �° C, therefore, it is not recommended to reinforce structures that must meet special fire requirements: building floors of more than 3 floors, bridge columns, monolithic towers of more than 3 floors.
With this exception, almost the entire range of concrete structures remains:
Silk, wool, and viscose rugs, available as single pieces or pairs, in various sizes and dimensions, with a wide price range, offered in different volumes to suit customer needs, ready for shipment to all destinations worldwide.
Fiberglass rebar area of application
Fittings made of composite materials are a product of new technologies, the technical characteristics of which make it possible to successfully use it as an alternative to traditional steel fittings in construction of:
Foundation;
Marine and port facilities;
Reinforcement of concrete tanks;
Repair and strengthening of bearing capacity of brick and reinforced concrete structures;
Road slabs, airfield slabs;
For the production of small architectural forms;
For the road paving and decking of highway bridges;
The implementation of the infrastructure elements in the chemical industries;
Repair of damaged brick and reinforced concrete structures;
Fittings are used for constructions based on gypsum binders;
Construction of swimming pools and industrial pools;
The application of fiberglass fittings in civil and industrial construction is caused by many variables:
Low specific gravity;
High corrosion resistance;
Low thermal conductivity of composite materials;
High strength, several times the strength of steel fittings;
Is a dielectric;
Durability;
As known, the main drawback of traditional low-carbon steel fittings is a low index of corrosion resistance, which limits their use in the construction of marine facilities and constructions located in the zone of variable water level.
Excellent quality bobbin, used in mattresses, made of 70D/2 polyester, with paper sides that prevent friction and with great machine performance.
Available in various measurements and in black or white colours, and with or without paper side
We supply various kinds of detergents for example shampoo, handwashing liquid, dishwashing liquid and powder, washing machine powder and liquid, soap, etc.
We can provide you these products in any packing you want based on price, quality and weight.
FIBRAPLAC RAW is our base in MDF board which are elaborated with a selection of woods that provide the best density as required by international standards DIN EN 622-5 and ANSI A208.2-2009.
CHARACTERISTICS
FIBRAPLAC RAW has a smooth homogeneous composition, as well as a uniform tonality that allows for any sort of finishing. It is of easy machinability, sustains wight efficiently and has a better resistance to combustion than solid wood. Furthermore, due to its excellent internal compaction and optimum screw grip, is the best alternative to solid wood boards .
Arffil ceramic foam filters are characterized as high permeation rate, good strength and thermal shock resistance, stable quality and without loosing impurity in high temperature either in big size or small ppi products.
Advantages compared with traditional filtering materials:
Thermal and chemical stability in high temperatureücavoiding the chemical reaction with the filtered molten metal.
High porosity and good mechanical strength in elevate temperature due to its pure ceramic composite.
Full open cell without loosing ceramic particles or powders (snowing) during filtrating.
Low head loss, easy operation, energy save.
Make metal flow reposeful and avoid the sputtering and backset, this increases the surface quality of the cast, prevent the pore disfigurement and finally lower down the waster rate.
Our moisture resistant FIBRAPLAC RH obtains Thais feature thanks to the use of MUF resins ( Melamine Urea Formaldehyde).
They are by means of a select composition of wood, that provide the optimum density required by international standards DIN EN 622-5 and ANSI A208.2-2009. It is recognized by its green color according to norm DIN EN 622-1.
CHARACTERISTICS
FIBRAPLAC RH it is an uncoated and moisture resistant board which allows it to preserve its properties better over time.
The smooth and homogeneous composition of this boards allow for any kind of finishings. It is easy to machine it, supports weight marvelously and it has greater resistance to deteriorating by moisture.
Due to its excellent internal composition and optimal screw grip, it is the best alternative to solid wood
800 Pallets of Bosque Verde Brand 0 Minimum Order: One Trailer - Sale Outside Europe
Available Stock:
Rinse Aid - 792 units
Dark Clothing Detergent - 144 units
Cologne Detergent -3,744 units
Blue Freshness Detergent - 432 units
Marseille Detergent 1,440 units
White & Colored Clothing Detergent 423 units
Delicate Garments Detergent-? 0 units
Dishwashing Liquid - 1,980 units
Blue Fabric Softener -3,300 units
Cologne Fabric Softener -300 units
Talc Fabric Softener - 660 units
Nutritive Fabric Softener - 660 units
Floral Fabric Softener - 700 units
Hypoallergenic Fabric Softener - 0 units
Washing Machine Perfumer -0 units
Prices are available upon request.
We have more references available and 1.000L IBC at
.jpg?format=webp)
